DESCRIPTION BY APPD DATE B REVISED PER ECR-ER22654 CTC 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. REV CY 03/15/10 NOTES: UNLESS OTHERWISE SPECIFIED 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) SPRING WASHER: .000200 MIN SILVER PER QQ-S-365 OVER COPPER PER ASTM B734 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 (ROHS) 4. CONTACT AND FERRULE SHIPPED LOOSE. 5. FOR USE WITH TACHII CABLE TCX-3CFWS OR EQUIVALENT. 6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5006 (.248 HEX, .054 SQUARE FLAT). 7. ASSEMBLE TO CABLE USING CAP-E01. 8. THESE AREA DON'T HAVE WHITE MARKING. 9. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 26 dB MIN (DC TO 3 GHz) MARKING: KINGS + 2065 + CABLE CODE + DATE CODE + LOCATION CODE .290 7.37 .198 5.03 .250 6.35 .127 3.23 .591 15.01 SEE NOTE 8 ( .354 8.99 .138 3.51 .748 19.00 RECOMMENDED CABLE TRIMMING DIMENSIONS DMF026 B 1.372 34.85 ) WHEN ASSEMBLED CATALOG P/N: 2065-E00-3CW02N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN CY APPROVED XXX DATE APPROVED 04/13/09 CTC DATE APPROVED XX/XX/XX XXX DATE 04/13/09 DATE XX/XX/XX BNC 75 PLUG FOR TACHII TCX-3CFWS (ROHS COMPLIANT) A SD2065-E00-3CW02N SHT 1 OF 1 REV B