TPSMB6.8 THRU TPSMB43A SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Peak Pulse Power - 600 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Easy pick and place ♦ Low profile package ♦ Built-in strain relief ideal for automated placement ♦ Exclusive patented PAR™ oxide passivated chip construction ♦ 600W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) ♦ For devices with V(BR)≥10V ID is typically less than 2.0µA at TA=150°C ♦ Designed for under the hood surface mount applications ♦ High temperature soldering: 250°C/10 seconds at terminals DO-214AA Modified J-Bend P A T E N T E D Breakdown Voltage - 6.8 - 43 Volts 0.086 (2.20) 0.155 (3.94) 0.130 (3.30) 0.077 (1.95) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.008 (0.203) MAX. 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.003 ounces, 0.093 gram Dimensions in inches and (millimeters) Available in uni-directional only MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTES 1,2, FIG. 1) PPPM Minimum 600 Watts Peak pulse current with a 10/1000µs waveform (NOTE 1, FIG. 3) IPPM SEE TABLE 1 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTES 2, 3) IFSM 70.0 Amps Instantaneous forward voltage at 50A (NOTE 3) VF 3.5 Volts TJ, TSTG -65 to +185 °C Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2 (2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) land areas per figure (3) Mounted on 8.3ms single half sine-wave duty cycle=4 pulses per minute maximum 1/21/99 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) (Volts) (NOTE 1) Min. Max. Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (µA) Maximum Reverse Leakage at VWM,TJ =150°C ID (µA) Maximum Peak Pulse Surge Current IPPM (NOTE 2) (Amps) Maximum Clamping Voltage at IPP Vc (Volts) Device Device Marking Code TPSMB6.8 KDP 6.12 7.48 10.0 5.50 500 1000 55.6 10.8 TPSMB6.8A KEP 6.45 7.14 10.0 5.80 500 1000 57.1 10.5 TPSMB7.5 KFP 6.75 8.25 10.0 6.05 250 500 51.3 11.7 TPSMB7.5A KGP 7.13 7.88 10.0 6.40 250 500 53.1 11.3 TPSMB8.2 KHP 7.38 9.02 10.0 6.63 100 200 48.0 12.5 TPSMB8.2A KKP 7.79 8.61 10.0 7.02 100 200 49.6 12.1 TPSMB9.1 KLP 8.19 10.0 1.0 7.37 25 50.0 43.5 13.8 TPSMB9.1A KMP 8.65 9.55 1.0 7.78 25 50.0 44.8 13.4 TPSMB10 KNP 9.00 11.0 1.0 8.10 5.0 20.0 40.0 15.0 TPSMB10A KPP 9.50 10.5 1.0 8.55 5.0 20.0 41.4 14.5 TPSMB11 KQP 9.90 12.1 1.0 8.92 2.0 5.0 37.0 16.2 TPSMB11A KRP 10.5 11.6 1.0 9.40 2.0 5.0 38.5 15.6 TPSMB12 KSP 10.8 13.2 1.0 9.72 2.0 5.0 34.7 17.3 TPSMB12A KTP 11.4 12.6 1.0 10.2 2.0 5.0 35.9 16.7 TPSMB13 KUP 11.7 14.3 1.0 10.5 2.0 5.0 31.6 19.0 TPSMB13A KVP 12.4 13.7 1.0 11.1 2.0 5.0 33.0 18.2 TPSMB15 KWP 13.5 16.5 1.0 12.1 2.0 5.0 27.3 22.0 TPSMB15A KXP 14.3 15.8 1.0 12.8 2.0 5.0 28.3 21.2 TPSMB16 KYP 14.4 17.6 1.0 12.9 2.0 5.0 25.5 23.5 TPSMB16A KZP 15.2 16.8 1.0 13.6 2.0 5.0 26.7 22.5 TPSMB18 LDP 16.2 19.8 1.0 14.5 2.0 5.0 22.6 26.5 TPSMB18A LEP 17.1 18.9 1.0 15.3 2.0 5.0 23.8 25.2 TPSMB20 LFP 18.0 22.0 1.0 16.2 2.0 5.0 20.6 29.1 TPSMB20A LGP 19.0 21.0 1.0 17.1 2.0 5.0 21.7 27.7 TPSMB22 LHP 19.8 24.2 1.0 17.8 2.0 5.0 18.8 31.9 TPSMB22A LKP 20.9 23.1 1.0 18.8 2.0 5.0 19.6 30.6 TPSMB24 LLP 21.6 26.4 1.0 19.4 2.0 5.0 17.3 34.7 TPSMB24A LMP 22.8 25.2 1.0 20.5 2.0 5.0 18.1 33.2 TPSMB27 LNP 24.3 29.7 1.0 21.8 2.0 5.0 15.3 39.1 TPSMB27A LPP 25.7 28.4 1.0 23.1 2.0 5.0 16.0 37.5 TPSMB30 LQP 27.0 33.0 1.0 24.3 2.0 5.0 13.8 43.5 TPSMB30A LRP 28.5 31.5 1.0 25.6 2.0 5.0 14.5 41.4 TPSMB33 LSP 29.7 36.3 1.0 26.8 2.0 5.0 12.6 47.7 TPSMB33A LTP 31.4 34.7 1.0 28.2 2.0 5.0 13.1 45.7 TPSMB36 LUP 32.4 39.6 1.0 29.1 2.0 5.0 11.5 52.0 TPSMB36A LVP 34.2 37.8 1.0 30.8 2.0 5.0 12.0 49.9 TPSMB39 LWP 35.1 42.9 1.0 31.6 2.0 5.0 10.6 56.4 TPSMB39A LXP 37.1 41.0 1.0 33.3 2.0 5.0 11.1 53.9 TPSMB43 LYP 38.7 47.3 1.0 34.8 2.0 5.0 9.7 61.9 TPSMB43A LZP 40.9 45.2 1.0 36.8 2.0 5.0 10.1 59.3 NOTES: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMB6.8 THRU TPSMB43A FIG. 1 - PEAK PULSE POWER RATING CURVE PPPM, PEAK POWER, kW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 10 1.0 0.2 X 0.2” (5.0 x 5.0mm) COPPER PAD AREAS 0.1 0.1µs 100µs 10µs 1.0µs 10ms 1.0ms td, PULSE WIDTH, sec. PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % FIG. 2 - PULSE DERATING CURVE 100 75 50 25 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, °C FIG. 3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % 150 tr=10µsec. PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP PEAK VALUE IPPM 100 HALF VALUE - IPP 2 50 10/1000µsec. WAVEFORM as DEFINED by R.E.A. td 0 0 1 2 t, TIME, ms 3 4 MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMB6.8 THRU TPSMB43A FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 CJ, JUNCTION CAPACITANCE, pF TJ=25°C f=1 MHz Vsig=50mVp-p VR MEASURED at ZERO BIAS 1,000 100 VR MEASURED at STAND-OFF VOLTAGE, VWM 10 1 100 200 10 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 5 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max 10 1 10 NUMBER OF CYCLES AT 60 HZ 100