TMPG06-6.8 THRU TMPG06-43A AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Case Style TMPG-06 P A T E N T E D * Breakdown Voltage - 6.8 to 43 Volts 1.0 (25.4) MIN. 0.100 (2.54) 0.090 (2.29) 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. Peak Pulse Power - 400 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Designed for the hood applications ♦ Available in uni-directional only ♦ Exclusive patented PAR™ oxide passivated chip construction ♦ 400W peak pulse power capability on 10/1000µs waveform, repetition rate (duty cycle): 1.0% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) ♦ For devices with V(BR)≥10V, ID are typically less than 1.0µA ♦ High temperature soldering guaranteed: 300°C/10 seconds 0.375 (9.5mm) lead length, 5lbs (2.3 kg) tension 0.025 (0.635) 0.025 (0.559) MECHANICAL DATA Dimensions in inches and (millimeters) * Patent #’s 4,980,315 5,166,769 5,278,094 Case: Molded plastic over a passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram Available in uni-directional only MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) PPPM Minimum 400 Watts Peak pulse power current with a 10/1000µs waveform (NOTE1,2, FIG. 3) IPPM SEE TABLE 1 Amps Steady state power dissipation at TL=75°C lead lengths 0.25” (6.33mm) (NOTE 2) PM(AV) 1.0 Watts IFSM 40.0 Amps VF 3.5 Volts TJ, TSTG -65 to +185 °C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 25A (NOTE 3) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pads area of 1.6 x 1.6” (40 x 40mm) (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum 1/25/99 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) Volts (NOTE 1) Stand-off Voltage VWm (Volts) Maximum Reverse Leakage at VWM ID (µA) Device Type MIN MAX Test Current at IT (mA) TMPG06-6.8 6.12 7.48 10.0 5.50 300 TMPG06-6.8A 6.45 7.14 10.0 5.80 TMPG06-7.5 6.75 8.25 10.0 TMPG06-7.5A 7.13 7.88 TMPG06-8.2 7.38 TMPG06-8.2A Maximum Reverse Leakage at VwM TJ=150°C ID (µA) Peak Pulse Current IPPM Maximum Temperature Coefficient of V(BR) (% / °C) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) 1000 27.8 10.8 0.057 300 1000 28.6 10.5 0.057 6.05 150 500 25.6 11.7 0.060 10.0 6.40 150 500 26.5 11.3 0.061 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 TMPG06-9.1 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 TMPG06-9.1A 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TMPG06-10 9.00 11.0 1.0 8.10 5.0 20.0 26.7 15.0 0.073 TMPG06-10A 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073 TMPG06-11 9.90 12.1 1.0 8.92 2.0 10.0 24.7 16.2 0.075 (NOTE 2) TMPG06-11A 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075 TMPG06-12 10.8 13.2 1.0 9.72 1.0 5.0 23.1 17.3 0.076 TMPG06-12A 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078 TMPG06-13 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 TMPG06-13A 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TMPG06-15 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 TMPG06-15A 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TMPG06-16 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 TMPG06-16A 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TMPG06-18 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 TMPG06-18A 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TMPG06-20 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 TMPG06-20A 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR) (Volts) (NOTE 1) Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (µA) Maximum Reverse Leakage at VwM TJ=150°C ID (µA) Peak Pulse Current IPPM Maximum Temperature Coefficient of V(BR) (% / °C) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) 5.0 12.5 31.9 0.092 1.0 5.0 13.1 30.6 0.092 19.4 1.0 5.0 11.5 34.2 0.094 1.0 20.5 1.0 5.0 12.0 33.2 0.094 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.096 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TMPG06-30 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 TMPG06-30A 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TMPG06-33 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 TMPG06-33A 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TMPG06-36 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 TMPG06-36A 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TMPG06-39 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 TMPG06-39A 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TMPG06-43 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 TMPG06-43A 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Device Type MIN MAX TMPG06-22 19.8 24.2 1.0 17.8 1.0 TMPG06-22A 20.9 23.1 1.0 18.8 TMPG06-24 21.6 26.4 1.0 TMPG06-24A 22.8 25.2 TMPG06-27 24.3 TMPG06-27A NOTES: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (NOTE 2) RATING AND CHARACTERISTIC CURVES TMPG06-6.8 THRU TMPG06-43A FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - PULSE DERATING CURVE NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 10 TMPG06-10 - TMPG06-43A 1.0 TMPG06-6.8 - TMPG06-9.1A 0.1 0.1µs 1.0ms 100µs 10µs 1.0µs 10ms td, PULSE WIDTH, sec. PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % PPPM, PEAK PULSE POWER, kW 100 100 75 50 25 0 0 25 50 75 100 175 200 125 150 TA, AMBIENT TEMPERATURE, °C FIG. 3 - PULSE WAVEFORM FIG. 4 - TYPICAL JUNCTION CAPACITANCE tr=10µsec. PEAK VALUE IPPM 100 10,000 PULSE WIDTH (td) IS DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of Ipp TJ=25°C f=1 MHz Vsig=50mVp-p HALF VALUE - IPP 2 50 0 10/1000µsec. WAVEFORM as DEFINED by R.E.A. td 4.0 3.0 2.0 t, TIME, ms 1.0 0 CJ, JUNCTION CAPACITANCE, pF IPPM PEAK PULSE CURRENT, % 150 1,000 MEASURED at ZERO BIAS 100 MEASURED at STAND-OFF VOLTAGE, VWM L 0.75 10 1.0 60HZ RESISTIVE OR INDUCTIVE LOAD = 0.375” (9.5mm) LEAD LENGTH 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0.50 1.6 x 1.6 x .040" (40 x 40 x 1mm) COPPER HEAT SINKS 0.25 0 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE,°C 175 200 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES PM(AV) STEADY STATE POWER DISSIPATION, WATTS FIG. 5 - STEADY STATE POWER DERATING CURVE 1.00 100 TL=75°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 1 10 NUMBER OF CYCLES AT 60 HZ 100