Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA Surface Mount Type Series: ZA Type: V High temperature Lead-Free reflow ■ Features ● Endurance: 10000 h at 105 °C ● Low ESR and High ripple current (70 % over, Lower ESR than Current V-FP) ● High voltage (to 80 V) ● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● RoHS directive compliant ■ Specifications Category Temp. Range –55 °C to +105 °C Rated W.V.Range 25 V.DC to 80 V.DC Nominal Cap.Range 10 µF to 330 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater) DC Leakage Current tan δ Please see the attached Standard Products list The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for 10000 hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified limits. (The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.) Capacitance change ±30 % of initial measured value Endurance tan δ < 200 % of initial specified value E. S. R. < 200 % of initial specified value < initial specified value DC leakage current Size Code ESR after Endurance (액/100 kHz) (–40 °C) C D D8 F G 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Soldering Heat Capacitance change ±10 % of initial measured value tan δ DC leakage current < initial specified value < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) 120 0.10 Correction factor 10 k 0.60 100 k to 1.00 ■ Dimensions in mm (not to scale) Marking color : BLACK 0.3 max. A±0.2 K Example:25 V 33 µF (Unit : mm) Series identification L Pressure Relief (φ10 and larger) Rated Voltage Mark Size code Lot number Rated Voltage Mark E V H 25 V 35 V 50 V J K 63 V 80 V D L A, B C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 (P) + (I) Capacitance (µF) 33 E ZA H φD±0.5 Negative polarity marking (–) B±0.2 – W ( ) Reference size H I W P K 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.5 1.8 1.8 3.1 4.6 0.15 0.35 +- 0.20 + 0.15 0.35 - 0.20 0.15 0.35 +- 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-2 – (I) ■ Marking 1k 0.30 01 Feb. 2013 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA ■ Standard Products Endurance : 105 °C 10000 h Case size W.V. (V) 25 35 50 63 80 E.S.R. tan δ (100 kHz) (+20 °C) (m액) 80 (120 Hz) (+20 °C) 0.14 EEHZA1E330R (5) (pcs) 1000 0.14 EEHZA1E560P (5) 1000 Dia. Length (µF) 33 (mm) 5 (mm) 5.8 C Ripple Current (100 kHz) (+105 °C) (mA r.m.s.) 900 56 6.3 5.8 D 1300 50 Cap. (±20 %) Min. Packaging Q'ty Specification Size Code Part No. Reflow (RoHS:compliant) Taping 100 6.3 7.7 D8 2000 30 0.14 EEHZA1E101XP (5) 900 220 8 10.2 F 2300 27 0.14 EEHZA1E221P (6) 500 330 10 10.2 G 2500 20 0.14 EEHZA1E331P (6) 500 22 5 5.8 C 900 100 0.12 EEHZA1V220R (5) 1000 27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P (5) 1000 47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P (5) 1000 68 6.3 7.7 D8 2000 35 0.12 EEHZA1V680XP (5) 900 27 0.12 EEHZA1V151P (6) 500 150 8 10.2 F 2300 270 10 10.2 G 2500 20 0.12 EEHZA1V271P (6) 500 10 5 5.8 C 750 120 0.10 EEHZA1H100R (5) 1000 22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P (5) 1000 33 6.3 7.7 D8 1600 40 0.10 EEHZA1H330XP (5) 900 68 8 10.2 F 1800 30 0.10 EEHZA1H680P (6) 500 100 10 10.2 G 2000 28 0.10 EEHZA1H101P (6) 500 10 6.3 5.8 D 1000 120 0.08 EEHZA1J100P (5) 1000 22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP (5) 900 33 8 10.2 F 1700 40 0.08 EEHZA1J330P (6) 500 56 10 10.2 G 1800 30 0.08 EEHZA1J560P (6) 500 22 8 10.2 F 1550 45 0.08 EEHZA1K220P (6) 500 33 10 10.2 G 1700 36 0.08 EEHZA1K330P (6) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-3 – 01 Feb. 2013