KSK-1C96F-... MEDER electronic DIMENSIONS Switch Model --> Contact For m --> All data at 20 0C Contact Ratings CHARACTERISTICS All dimensions in mm [inches] Conditions Glass length of 14.0 mm and diameter of 2.15 mm Single pole double throw Form C High power CONTACT DATA KSK-1C96F-... For m C Max. Units Contact Rating * Any DC combination of V & A not to exceed their individual max.'s 20 W Switching Voltage D C or peak A C 150 V Switching Current D C or peak A C 1.0 A Carry Current D C or peak A C 2.0 A Static Contact Resistance w/ 0.5V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 250 mΩ Insulation Resistance across Contacts 100 Volts applied 109 Breakdown Voltage Voltage applied for 60 sec. min. 200 Operate Time, incl. Bounce Measured w/ 100% overdrive Reset Time Measured w/ no coil suppression Capacitance @ 10kHz across contact Min. T yp . Ω VD C 2.6 ms 1.5 ms pF 0.8 Test Coil ** KMS-01 Standard AT range 15 50 AT g Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 Vibration Resistance From 10 - 2000 Hz 20 Ambient Temperature 10 C/ minute max. allowable -20 Storage Temperature 10 C/ minute max. allowable -55 Soldering Temperature 5 sec. dwell 0 0 g 130 0 C 130 0 C 260 0 C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * For life expectancy see our life test section located on page 151. ** See our test coil section located on page 157. ORDER INFORMATION SERIES CONTACT FORM SWITCH MODEL AT RANGE (between) KSK - 1C 96F - XXXX OPTIONS Part Number Example - KSK - 1C96F - 1921 1921 is the AT range (Any AT can be ordered between 15 & 50 in a minimum range of 2 AT) 15 50 www.meder.com 148 Germany # ++49-(0)7733-94870, USA # 800-870-5385