PEVA Series Conductive Polymer Aluminum Solid Capacitors (V Chip) MERITEK RoHS FEATURES Standard SMD type Rated voltage: 2.5VDC ~25VDC Endurance: 2000hours at 105ºC Suitable for DC-DC converters, Voltage regulators and decoupling applications. SPECIFICATIONS Item Characteristic Category Temperature Range -55ºC ~ +105C Rated Voltage Range 2.5VDC ~ 25VDC Surge Voltage Rated voltage x 1.15V at +105C Capacitance Tolerance M=±20% at 120Hz, 20ºC Leakage Current Shall not exceed values shown in standard ratings at 20ºC after 2 minutes Dissipation Factor ( tan ) 0.12 (max) at 120Hz, 20ºC Temperature Stability Impedance change Z(-55ºC)/Z(+20ºC)≤1.25 at -55C, 100kHz Z(+105ºC)/Z(+20ºC)≤1.25 at +105C, 100kHz Endurance Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The specifications shall be satisfied when the capacitors are restored to 20ºC after the rated voltage is applied for 2000hours at 105ºC Damp Heat, Steady State Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The specifications shall be satisfied when the capacitors are restored to 20ºC after subjecting them to store at 60ºC, 90%~ 95% R.H. for 1000hours, without DC applied. Surge Voltage Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 105ºC for 30 seconds through a protective resistor (R=1kΩ) and discharge for 5 minutes 30 seconds NOTE: If any doubt arises, measure the leakage current after following voltage treatment Voltage treatment: DC rated voltage is applied to the capacitors for 60 minutes at 105ºC DIMENSIONS (mm) Size code BD+0.5 (max) TH±0.2 BW±0.2 BL±0.2 TL±0.2 EW EG±0.2 0506 5.0 5.8 5.3 5.3 6.0 0.5~0.8 1.4 0604 6.3 4.3 6.6 6.6 7.3 0.5~0.8 2.1 0606 6.3 5.8 6.6 6.6 7.3 0.5~0.8 2.1 0807 8.0 6.8 8.3 8.3 9.0 0.5~0.8 2.9 0810 8.0 9.7 8.3 8.3 9.0 0.8~1.1 2.9 Rev. 7 PEVA Series Conductive Polymer Aluminum Solid Capacitors (V Chip) MERITEK RoHS STANDARD RATINGS ,WHP PEVA2R5331M0506 PEVA2R5331M0604 PEVA2R5331M0606 PEVA2R5391M0506 PEVA2R5391M0606 PEVA2R5561M0606 PEVA2R5561M0606 PEVA4R0221M0606 PEVA4R0331M0606 PEVA6R3101M0606 PEVA6R3151M0606 PEVA6R3221M0506 PEVA6R3221M0604 PEVA6R3221M0606 PEVA6R3331M0606 PEVA10V121M0606 PEVA16V470M0506 PEVA16V470M0606 PEVA16V680M0604 PEVA16V101M0506 PEVA16V101M0606 PEVA16V271M0807 PEVA16V271M0810 PEVA25V150M0604 PEVA25V220M0604 PEVA25V270M0606 PEVA25V470M0606 Working Voltage(SV) (Vdc) 2.5(2.9) 2.5(2.9) 2.5(2.9) 2.5(2.9) 2.5(2.9) 2.5(2.9) 2.5(2.9) 4.0(4.6) 4.0(4.6) 6.3(7.2) 6.3(7.2) 6.3(7.2) 6.3(7.2) 6.3(7.2) 6.3(7.2) 10(11.5) 16(18.4) 16(18.4) 16(18.4) 16(18.4) 16(18.4) 16(18.4) 16(18.4) 25(25) 25(25) 25(25) 25(25) Capacitance (uF) 330 330 330 390 390 560 560 220 330 100 150 220 220 220 330 120 47 47 68 100 100 270 270 15 22 27 47 Size Code 0506 0604 0606 0506 0606 0606 0606 0606 0606 0606 0606 0506 0604 0606 0606 0606 0506 0606 0604 0506 0606 0807 0810 0604 0604 0606 0606 Leakage Current (uA) 165 700 413 700 292 700 700 440 660 315 473 500 700 277 416 600 376 376 544 320 320 864 864 300 275 135 235 ESR1 (mΩ), max 21 17 15 10 10 10 16 25 15 27 15 15 17 15 17 25 35 25 40 27 24 22 16 55 45 40 30 Rated Ripple Current2 (mArms) 2670 2300 3160 3900 3900 3900 3500 2500 3160 2400 2700 3150 2300 3160 3390 2530 2070 2500 2450 3000 2490 3300 4070 1650 2350 2100 2500 NOTE: 1. Test condition: 20ºC, 100kHz~300kHz 2. Test condition: 105ºC, 100kHz Rev. 7