ALUMINUM ELECTROLYTIC CAPACITORS CZ Chip Type, High Reliability. Low temperature ESR specification. series Chip type, high temperature range, for +125°C use. Added ESR specification after the test at -40°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC). Low ESR Long Life CZ CJ Specifications Item Performance Characteristics Category Temperature Range –40 to +125°C Rated Voltage Range 10 to 100V Rated Capacitance Range 10 to 470 µF Capacitance Tolerance ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Leakage Current Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 10 0.30 16 0.23 25 0.18 50 0.16 35 0.16 63 0.12 80 0.12 100 0.10 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) 10 16 25 35 50 63 80 100 Impedance ratio Z–40°C / Z+20°C ZT / Z20 (MAX.) 12 8 6 4 4 3 3 3 After 3000 hours (1000hours for φ6.3 × 5.8L, 2000hours for φD=6.3 × 7.7L) application of rated voltage at 125°C, capacitors meet the characteristics requirements listed below. Endurance After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Capacitance Change Within ±10% of the initial capacitance value which is maintained at 250°C. The capacitors shall meet tan δ Less than or equal to the initial specified value the characteristic requirements listed at right when they Leakage current Less than or equal to the initial specified value are removed from the plate and restored to 20°C. Black print on the case top. Shelf Life Resistance to soldering heat Marking Type numbering system (Example : 35V 47µF) Chip Type 6 7 8 9 10 11 12 13 14 0.5MAX. Package code A±0.2 A±0.2 Capacitance tolerance (±20%) Rated capacitance (47µF) Rated voltage (35V) Series name Negative C±0.2 A±0.2 0.3 MAX. A±0.2 E a2 220V CZ A±0.2 A±0.2 Trade mark Series B±0.2 0.5MAX. Plastic platform Voltage (V : 35V ) E B±0.2 φD±0.5 C±0.2 0.5 MAX. (φ 8 to φ10) Vibration Resistance Positive L±0.5 Lot No. Configration Code Standard L Vibration Resistance S Type Plastic platform 0.3MAX. Series A2 220V CZ 5 Size code (φ 8 to φ10) Standard Trade mark 4 L ± 0.3 H Voltage (V : 35V ) 3 Configuration E B±0.2 C±0.2 φD±0.5 A2 47V CZ Plastic platform 0.3MAX. 2 UC Z 1 V 4 7 0 MC L 1 GS Positive Series Capacitance Lot No. 1 please contact us for vibration resistance. φ D±0.5 (φ 6.3) Standard Voltage (C:35V) Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance Change tan δ Leakage current L±1.0 Capacitance H Negative Lot No. H Capacitance Aid electrode Standard φD×L (mm) Vibration Resistance (mm) 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 A 2.4 2.4 2.9 3.2 φD×L 8 × 10 10 × 10 A 2.9 3.2 B 6.6 6.6 8.3 10.3 B 8.3 10.3 C 6.6 6.6 8.3 10.3 C 8.3 10.3 E 2.2 2.2 3.1 4.5 E 3.1 4.5 L 5.8 7.7 10 10 L 10 10 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 H Rated Voltage V Code 10 A 16 C 25 E 35 V 50 H 63 J 80 K 100 2A 1.1 to 1.5 1.1 to 1.5 CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS CZ series Dimensions Cap. (µF) V 10 16 25 35 50 Code 1A 1C 1E 1V 1H 10 100 6.3 × 5.8 1.60 24 69 6.3 × 5.8 2.80 42 22 220 6.3 × 5.8 1.60 24 69 6.3 × 7.7 0.50 5 40 197 6.3 × 7.7 0.50 5 40 197 33 330 47 470 68 680 100 101 6.3 × 5.8 1.60 24 6.3 × 5.8 1.60 24 Recommend 16V 8 × 10 221 8 × 10 330 6.3 × 7.7 0.45 5 40 197 8 × 10 0.25 3.5 6 270 6.3 × 7.7 0.45 220 69 51 331 0.20 0.20 3 4.5 270 3 4.5 270 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 5 6.3 × 7.7 0.45 69 40 197 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 Recommend 35V 6.3 × 7.7 0.45 5 40 197 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 5 40 197 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 6.3 × 7.7 0.50 5 40 197 8 × 10 0.25 3.5 6 270 10 × 10 0.20 2.5 4.5 500 after endurance Initial Initial test Case size 20°C -40°C 2000 hours Rated φD × L -40°C ripple (mm) 470 Cap. (µF) 471 V 63 80 Code 1J 1K 10 100 22 220 33 47 6.3 × 7.7 2.00 100 330 470 8 × 10 0.70 35 60 100 ESR 100 2A 8 × 10 0.75 50 70 8 × 10 0.75 50 70 8 × 10 0.75 50 70 8 × 10 0.75 50 70 10 × 10 0.55 35 115 10 × 10 0.55 35 115 10 × 10 0.55 35 115 Case size Initial Initial 20°C -40°C 8 × 10 0.70 35 100 8 × 10 0.75 50 70 10 × 10 0.50 25 170 10 × 10 0.55 35 115 8 × 10 0.70 35 160 10 × 10 0.50 25 170 10 × 10 0.55 35 115 φD × L (mm) after endurance test 2000hours -40°C Rated ripple ESR Max. ESR (Ω) at 20°C / -40°C 100kHz, Rated ripple Current (mArms) at 125°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 50Hz 0.35 120Hz 0.50 300Hz 0.64 1kHz 0.83 10kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B