8 7 6 5 3 4 2 SRISD5003 DOCUMENT REVISIONS STAINLESS STEEL COMPATIBLE LASER WELDABLE DOUBLE-ENDED POWER SUB-D HEADER • DOUBLE-ENDED (MALE PLUG/MALE PLUG) CONFIGURATION WITH THE WELD INTERFACE AT THE TOP REV DCN REVISION DATE RELEASE APPROVAL - INIT RLSE 2007-08-17 J. PETRI A DCN001548 5/14/2015 Jim Petri 2015.05.27 08:24:47 -04'00' • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL OR FLANGE D • CONFORMS TO MIL-DTL-24308 ( CONTACT CONFIGURATIONS. D .142 POWER CONTACT) AND ARE AVAILABLE IN 3, 5 AND 8 COUNT • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. 1. LEAK RATE: LESS THAN OR EQUAL TO 2X10E-10 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. TESTED TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/3. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. DIELECTRIC: CERAMAX PROPRIETARY CERAMIC. SHELL: STAINLESS STEEL ALLOY 304L IN ACCORDANCE WITH SAE AMS-QQ-S-763. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/ .000250 THICK. GOLD PLATE PER ASTM B488-01, TYPE II, CODE C, .000050/ .000100 THICK. SHELL: PASSIVATED PER QQ-P-35. C 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRISD5003 - 5 PIN COUNT = 5 (SEE TAB) BASE NUMBER B B (5-PIN CONFIGURATION SHOWN) A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, SUB-D, POWER, RCPT-RCPT, SC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 1:1 2 CAGE CODE SRISD5003 3PJY7 SHEET 1 REV A 1 OF 2 8 6 7 D 5 3 4 2 SRISD5003 DOCUMENT D L .002 AIR SIDE W .002 2XR SHELL CONTACT C C .025 ALL AROUND .633 A X .001 .015±.002 .085 .001 O .025 .003 MAX BRK .090±.002 0 Y .001 .025 ALL AROUND 2XR HOLE DETAIL (NOT TO SCALE) B B VACUUM SIDE A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, SUB-D, POWER, RCPT-RCPT, SC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 1:1 2 CAGE CODE SRISD5003 3PJY7 SHEET 1 REV A 2 OF 2