8 7 6 5 4 2 3 ALUMINUM COMPATIBLE LASER WELDABLE DOUBLE-ENDED SUB-D HEADER REV - DOCUMENT CHANGE NO. INIT RLSE SRISD5008 REVISIONS DATE 2009-11-05 CFG APPROVAL J. PETRI • DOUBLE-ENDED (MALE PLUG/MALE PLUG) CONFIGURATION WITH THE WELD INTERFACE AT THE TOP D • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL OR FLANGE • CONFORMS TO MIL-DTL-24308 (SIZE 20 CONTACT) AND ARE AVAILABLE IN 9, 15, 25, 37 AND 50 COUNT CONTACT CONFIGURATIONS. D • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. 1. LEAK RATE: LESS THAN OR EQUAL TO 2X10E-10 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. TEST TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/3. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. DIELECTRIC: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4047 IN ACCORDANCE WITH AWS A5.8. THREADED INSERT: NAS1130-04-15 C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/ .000250 THICK. GOLD PLATE PER ASTM B488-01, TYPE III, CODE A, .000050/ .000100 THICK. C 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2): EXAMPLE: SRISD5008 - 25 PIN COUNT = 25 (SEE TAB) BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, SUB-D, PLUG/PLUG, TF AC LBW, (ARR1, SIZE 20) SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 1:1 2 CAGE CODE SRISD5008 3PJY7 SHEET 1 REV - 1 OF 2 A 8 6 7 4 5 3 2 SRISD5008 DOCUMENT .025 D L .002 SHELL .025 W .002 O D DIELECTRIC CONTACT 2X R O .025 C C THREADED INSERT 0 .085 .002 X .001 .090±.002 .015±.002 O Y .001 .588 .003 MAX BRK 2X R B B HOLE DETAIL (NOT TO SCALE) UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, SUB-D, PLUG/PLUG, TF AC LBW, (ARR1, SIZE 20) SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE SRISD5008 3PJY7 SHEET 1 REV - 2 OF 2 A