8 7 6 5 3 4 2 SRISD5007 DOCUMENT REVISIONS ALUMINUM COMPATIBLE LASER WELDABLE DOUBLE-ENDED SUB-D HEADER • DOUBLE-ENDED (MALE PLUG/FEMALE RECEPTACLE) CONFIGURATION WITH THE WELD INTERFACE AT THE TOP REV DCN REVISION DATE RELEASE APPROVAL - INIT RLSE 2008-11-11 J. PETRI A DCN001548 5/14/2015 Jim Petri 2015.05.27 08:25:37 -04'00' • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL OR FLANGE D D • CONFORMS TO MIL-DTL-24308 AND ARE AVAILABLE IN 9, 15, 25, 37, 50 AND 104 COUNT CONTACT CONFIGURATIONS (ARRANGEMENT 1) AND 15, 26, 44, 62, AND 78 CONTACT CONFIGURATIONS (ARRANGEMENT 2). • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. 1. LEAK RATE: LESS THAN OR EQUAL TO 2X10E-10 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. TEST TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/1. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. DIELECTRIC: CERAMAX PROPRIETARY CERAMIC. INSULATOR: POLYPHENYLENE SULFIDE (TECHTRON) SHELL: STAINLESS STEEL ALLOY 304L IN ACCORDANCE WITH SAE AMS-QQ-S-763. SHELL WELD FLANGE: ALUMINUM ALLOY 4047. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/ .000250 THICK. GOLD PLATE PER ASTM B488-01, TYPE III, CODE A, .000050/ .000100 THICK. C 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRISD5007 - 1 - 25 PIN COUNT = 25 (SEE TAB) ARRANGEMENT = 1 (SEE TAB) BASE NUMBER B B SRISD5007-1-15 SHOWN SRISD5007-2-15 SHOWN A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE HEADER, SUB-D, PLUG/RCPT, AC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 1:1 2 CAGE CODE SRISD5007 3PJY7 SHEET 1 REV A 1 OF 2 8 6 7 5 3 4 2 SRISD5007 DOCUMENT L .002 .025 A D O .025 D SHELL W .002 INSULATOR CONTACT 2X R DIELECTRIC SECTION A-A A A X .001 C .015±.002 .085 .001 C O 0 Y .001 .090±.002 .003 MAX BRK 2X R .334±.003 HOLE DETAIL (NOT TO SCALE) 2X .567 .576 2X .165 B B A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE HEADER, SUB-D, PLUG/RCPT, AC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 2:1 2 CAGE CODE SRISD5007 3PJY7 SHEET 1 REV A 2 OF 2