Tape and Reel Packaging Introduction Specifications The electronics industry is making a tremendous investment in surfacemount technology. The reasons for this investment include cost savings resulting from automated component placement and increased density of PCB layout due to smaller package sizes. Analog Devices’ tape and reel specifications are in conformance with the EIA Standard 481 “Taping of Surface-Mount Components for Automatic Placement.” Today’s placement machines can pick and place thousands of components per hour with a very high degree of accuracy. To achieve this performance, the component delivery system must be capable of feeding parts at high speeds in a consistent orientation, positively indexed to the demands of the machine. The leads of the components must be protected from damage during shipment, handling, and placement. The preferred packing material available today for these demands is tape and reel. Analog Devices’ tape and reel system is fully compatible with the detaping equipment that is standard in most automated placement equipment. In the tape and reel format, the components are placed in specifically designed pockets embossed in a plastic carrier tape. The cover tape is sealed to the carrier tape to keep the parts in place in these pockets. A row of sprocket holes is provided along one edge of the embossed tape to facilitate positive indexing. The tape is then wound onto a rigid plastic reel that provides mechanical protection during handling and storage. These reels are dust-free and compatible with a clean environment. ESD Protection Analog Devices’ tape and reel delivery system is designed to offer a very high degree of protection against electrostatic discharge (ESD). All tape and reel materials are static-dissipative. In addition, drypacked reels are shipped in moisture barrier bags; nondrypacked reels are shipped in a box with ESD conductive coating or in a conductive ESD bag. To retain the benefits of this protection, the bags should be opened only at ESD controlled workstations by trained personnel. Peel Back Strength The peel back force will be between 10 g and 100 g for 8 mm wide tape and 10 g to 130 g for tapes 12 mm and wider when tested at room temperature and pulled at a 175° to 180° angle with a peel-off speed of 300 ± 10 mm/min. Direction of Feed Direction of feed is defined as the direction in which the end user unreels the tape. The direction of feed for all products is counterclockwise when the reel is held with the round sprocket holes facing the observer. Figure 1. Direction of feed. www.analog.com Pin 1 Orientation Devices are reeled so that Pin 1 is oriented properly with the direction of feed and round sprocket holes. Pin 1 orientation is denoted as C1 to C4, or M1, with respect to the direction of feed and round sprocket holes, as illustrated below. DIRECTION OF FEED ROUND SPROCKET HOLES M1 C1 C2 C4 C3 Figure 2. Pin 1 orientation reference. NBSOIC (C1) WBSOIC (C1) DIRECTION OF FEED SSOP, TSSOP, AND MSOP (C1) DIRECTION OF FEED TQFP, LQFP, MQFP, AND LPCC (C2) DIRECTION OF FEED SOT-23 (C4) DIRECTION OF FEED DIRECTION OF FEED PLCC (M1) SOT-23 (C4) DIRECTION OF FEED DIRECTION OF FEED Figure 3. Examples of standard Pin 1 orientation. | Tape and Reel Packaging 2 Table 1. Standard Package Tape and Reel (See Page 5 for Reel Definitions) Package Designator Body Size (mm) PLCC P N/A PLCC P N/A PLCC P N/A PLCC P PLCC JLCC Device Package Type Number of Leads Reel Quantity Tape Width Tape Pitch Pin 1 (mm) (mm) Orientation 7" Reel 13" Reel (4" Hub) 13" Reel (6" Hub) 20 250 1000 N/A 16 12 M1 28, 32 Not offered 750 N/A 24 16 M1 44 Not offered 500 N/A 32 24 M1 N/A 68 Not offered N/A 250 44 32 M1 P N/A 84 Not offered N/A 250 44 36 M1 J N/A 28 Not offered 250 N/A 24 16 M1 JLCC J N/A 44 Not offered 500 N/A 32 24 M1 LCC E N/A 8 250 3000 N/A 12 8 M1 SOIC_N/SOIC_N_EP R/RD N/A 8 1000 2500 N/A 12 8 C1 SOIC_N/SOIC_N_EP R/RD N/A 14, 16 1000 2500 N/A 16 8 C1 QSOP RQ/RC N/A 16 1000 2500 N/A 12 8 C1 QSOP RQ N/A 20, 24, 28 1000 2500 N/A 16 8 C1 SOIC_W/SOIC_W_BAT RW/RB N/A 14, 16 400 1000 N/A 16 12 C1 SOIC_W/SOIC_W_BAT RW/RB N/A 18 400 1000 N/A 24 16 C1 SOIC_W/SOIC_W_BAT RW/RB N/A 20, 24 400 1000 N/A 24 12 C1 SOIC_W/SOIC_W_BAT RW/RB N/A 28 400 1000 N/A 32 12 C1 SSOP RS N/A 16, 20, 24 500 1500 N/A 16 12 C1 SSOP RS N/A 28 500 1500 N/A 24 12 C1 PSOP2 RP N/A 20, 28 200 1000 N/A 24 12 C1 PSOP3 RR N/A 20 Not offered 750 N/A 24 20 C1 RT N/A 3 3000 10,000 N/A 8 4 C4 SOT_23 RJ/RT N/A 5, 6, 8 3000 10,000 N/A 8 4 C4 SOT-143 RA N/A 4 3000 10,000 N/A 8 4 C4 TSOT UJ N/A 5, 6, 8 3000 10,000 N/A 8 4 C4 SOT-223 KC N/A 3 500 2500 N/A 16 12 C4 SC70 KS N/A 3, 4, 5, 6 3000 10,000 N/A 8 4 C4 TSSOP_4.4 RU/RE N/A 8, 14, 16, 20, 24, 28, 38 1000 2500 N/A 16 8 C1 TSSOP_6.1 RV N/A 28, 48 Not offered 2500 N/A 24 12 C1 RM/RH N/A 8, 10 1000 3000 N/A 12 8 C1 QC N/A 14 Not offered 750 N/A 24 16 C1 TQFP SU/SV 7 × 7 × 1.0 All counts 500 2000 Not offered 16 12 C2 TQFP SU/SV 10 × 10 × 1.0 All counts Not offered 1500 Not offered 24 16 C2 TQFP SU/SV 12 × 12 × 1.0 All counts Not offered 1000 Not offered 24 24 C2 TQFP SU/SV 14 × 14 × 1.0 All counts Not offered 1000 Not offered 32 24 C2 LQFP ST 7 × 7 × 1.4 All counts 500 2000 Not offered 16 12 C2 LQFP ST 10 × 10 × 1.4 All counts Not offered 1500 Not offered 24 16 C2 LQFP ST 12 × 12 × 1.4 All counts Not offered 1000 Not offered 24 24 C2 LQFP ST 14 × 14 × 1.4 All counts Not offered 1000 Not offered 32 24 C2 LQFP ST 14 × 20 × 1.4 All counts Not offered 1000 Not offered 44 24 C1 SOT_23_3 1 MSOP CERPAK | Tape and Reel Packaging 3 Table 1. Standard Package Tape and Reel (Continued) (See Page 5 for Reel Definitions) Reel Quantity Package Designator Body Size (mm) Number of Leads 7" Reel 13" Reel (4" Hub) 13" Reel (6" Hub) S 10 × 10 × 2.0 All counts Not offered 800 Not offered MQFP S 14 × 14 × 2.0 All counts Not offered 600 MQFP 2 S 14 × 14 × 2.7 All counts Not offered 5002 CSP_BGA BC 5×5 All counts Not offered 4000 CSP_BGA BC 6×6 All counts Not offered CSP_BGA BC 7×7 All counts CSP_BGA BC 8×8 CSP_BGA BC 9×9 Device Package Type MQFP Tape Width Tape Pitch Pin 1 (mm) (mm) Orientation 24 24 C2 Not offered 32 24 C2 Not offered 12 8 C2 Not offered 12 8 C2 2500 Not offered 12 8 C2 Not offered 2000 Not offered 16 12 C2 All counts Not offered 2000 Not offered 16 12 C2 All counts 500 2000 Not offered 16 12 C2 CSP_BGA BC 10 × 10 All counts 400 1500 Not offered 24 16 C2 CSP_BGA BC 12 × 12 All counts Not offered 1500 Not offered 24 16 C2 CSP_BGA BC 13 × 13 All counts Not offered 1000 Not offered 24 24 C2 CSP_BGA BC 17 × 17 All counts Not offered 1000 Not offered 24 24 C2 BGA B 19 × 19 All counts Not offered Not offered 700 32 24 C2 BGA B 23 × 23 All counts Not offered Not offered 450 44 32 C2 BGA B 27 × 27 All counts Not offered Not offered 450 44 32 C2 BGA B 35 × 35 All counts Not offered Not offered 300 56 40 C2 CBGA BG 7×7 32 balls Not offered 500 Not offered 16 12 C2 LGA CC 3.5 × 4.5 24 1500 5000 Not offered 12 8 C1 LGA CC 6×8 All counts 1000 4000 Not offered 16 8 C1 LGA CC 8 × 10 All counts Not offered 2000 Not offered 24 12 C1 CC 10 × 10 All counts Not offered 2000 Not offered 24 12 C2 CP 3×2 All counts 3000 10,000 Not offered 12 4 C1 LFCSP CP 3×3 All counts 1500 5000 Not offered 12 8 C2 LFCSP CP 4×4 All counts 1500 5000 Not offered 12 8 C2 LFCSP CP 4×5 All counts 1500 5000 Not offered 12 8 C1 LFCSP CP 5×5 All counts 1500 5000 Not offered 12 8 C2 LFCSP CP 6×6 All counts 750 2500 Not offered 16 12 C2 LFCSP CP 7×7 All counts 750 2500 Not offered 16 12 C2 LFCSP CP 8×8 All counts 750 2500 Not offered 16 12 C2 LFCSP CP 9×9 All counts 750 2500 Not offered 16 12 C2 LFCSP CP 10 × 10 All counts Not offered 2000 Not offered 24 16 C2 LFCSP CP 5 × 5 × 1.45 All counts Not offered 4000 Not offered 12 8 C2 LFCSP CP 4 × 4 × 1.45 All counts Not offered 4000 Not offered 12 8 C2 LFCSP CP 3 × 5 × 1.45 All counts 1000 4000 Not offered 12 8 C1 LFCSP CP 2 × 3 × 0.75 All counts 3000 10,000 Not offered 12 4 C2 LFCSP CP 1.6 × 1.3 × 0.55 All counts 3000 10,000 Not offered 8 4 C1 LFCSP CP 2.1 × 2.1 × 0.55 All counts 3000 10,000 Not offered 8 4 C1 LFCSP CP 3 × 3 × 0.75 All counts 1500 5000 Not offered 12 8 C2 LGA LFCSP 4 F or SOT-23 packages with greater than three leads, use the RJ designator. 2 Advantek part number Q14X14-HHX52.OP2 is the only approved carrier tape for this package. When boxing this reel, dunnage (crumpled kraft paper) shall be used between the reel. 3 For bumped die or WLCSP packages, see Table 2. Orientation for these devices is as per EIA783 (bumps facing bottom of carrier cavity; Pin 1 towards sprocket holes). 4 Standard thickness for LFCSP is 0.85 mm, except when noted. 1 www.analog.com | 4 Table 2. WLCSP/Bumped Die Sales Tape and Reel Part Number Device Package Type Package Designator ADG3304 ADG787 ADG819 ADG884 ADG888 ADL5500 1 ADM8834 AD6548 AD7877 AD8205 AD8311/AD8312 AD8605 AD9938 AD5801 AD58012 AD5398 AD9948/AD9949 ADG3308 ADG790 AD5806 ADAU1301 AD5820 AD5820 2 AD5805 AD15/AD416 AD5821 ADV7521 WLCSP WLCSP WLCSP WLCSP WLCSP WLCSP WLCSP Bumped chip WLCSP CHIP WLCSP WLCSP Bumped chip WLCSP WLCSP WLCSP WLCSP WLCSP WLCSP WLCSP Bumped chip WLCSP WLCSP WLCSP WLCSP WLCSP WLCSP CB CB CB CB CB CB CB CD CB C CB CB CD CB CB CB CB CB CB CB CD CB CB CB CB CB CB Die Size Die Size Die Size X (𝛍m) Y (𝛍m) Z (𝛍m) 7" Reel 1610 1500 1140 1500 2000 1000 2000 3240 2765 1650 1000 940 2675 3270 3270 1515 2710 1960 2500 2500 1275 1035 1035 1170 1960 1515 3500 2010 2000 2180 2000 2000 1000 2000 3140 2545 1650 1500 1330 4290 3170 3170 1690 3360 2460 3000 2500 875 1500 1500 1890 2460 1690 3500 655 655 605 655 655 596 605 350 600 710 596 496 501 655 555 655 563 600 656 656 350 656 555 505 600 655 605 N/A N/A N/A N/A N/A 250 N/A N/A N/A N/A 250 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Reel Quantity 13" Reel (4" Hub) 13" Reel (6" Hub) 3000 3000 3000 3000 3000 3000 4000 N/A 3000 4000 3000 4000 3000 1500 1500 3000 3000 3000 3000 3000 5000 3000 3000 3000 3000 3000 1500 10,000 10,000 10,000 10,000 10,000 10,000 15,000 3000 10,000 10,000 N/A 15,000 N/A 5000 5000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 5000 Tape Width (mm) Tape Pitch (mm) Pin 1 Orientation 8 8 8 8 8 8 8 12 8 8 8 8 12 12 12 8 8 8 8 8 8 8 8 8 8 8 12 4 4 4 4 4 4 4 8 4 4 4 4 4 8 8 4 4 4 4 4 4 4 4 4 4 4 8 C1 C1 C1 C1 C1 C1 C1 C2 C1 C1 C1 C1 C1 C4 C4 C1 C1 C1 C1 C1 C1 C1 C1 C1 C2 C1 C1 C-Pak part number 4205418-2/A (BD0090X0090) is the only approved carrier tape for the ADL5500 WLCSP. Special carrier tapes exist for these products, where the required wafer thickness is 12 mil and the required spheres are 250 μm. 1 2 Table 3. Small Quantity Reel Device Package Type Package Designator Body Size (mm) Number of Leads Reel Quantity 7" Reel Tape Width (mm) Tape Pitch (mm) Pin 1 Orientation SOT-23 RT N/A 3 250 8 4 C4 SOT-231 RJ/RT N/A 5, 6, 8 250 8 4 C4 SOT-143 RT N/A 4 250 8 4 C4 C4 SC70 KS N/A 3, 4, 5, 6 250 8 4 MSOP RM N/A 8, 10 250 12 8 C1 WLCSP2 CB N/A All counts 250 See Table 2 See Table 2 See Table 2 LFCSP CP 3×2 All counts 250 12 4 C1 LFCSP CP 3×3 All counts 250 12 8 C2 LFCSP CP 4×4 All counts 250 12 8 C2 LFCSP CP 5×5 All counts 250 12 8 C2 For SOT-23 packages prior to Rev. W, all products and lead counts use RT. For SOT-23 packages from Rev. W, all new products with greater than three leads use the RJ designator. 2 For actual WLCSP products available in small quantity reels, please cross reference with “7” reel (small quantity)” column of Table 2. 1 Glossary REEL7 (aka R7 or RL7) This is a 7" reel. Quantities vary based on package size. Reel (aka RL or R) This is a 13" reel. Quantities vary based on package size. Waffle Pack A small 2" × 2" tray designed to contain a small quantity of product in small packages, such as LFCSP, and in die forms like bare die, bumped chip, and WLCSPs. | Tape and Reel Packaging 5 Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6 80807 Munich Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, Inc. Japan Headquarters Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices, Inc. Southeast Asia Headquarters Analog Devices 22/F One Corporate Avenue 222 Hu Bin Road Shanghai, 200021 China Tel: 86.21.2320.8000 Fax: 86.21.2320.8222 ©2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. T03762-0-1/13(J) www.analog.com