BP Series Aluminum Electrolytic Capacitors (Bi-Polarized, 85°C) MERITEK FEATURES Have high frequency and high ripple current characteristics. Suitable for equalizing of horizontal deflection of TV sets and terminals. SPECIFICATIONS Item Characteristic Operating Temp Range - 40 ~ +85C Rated Working Voltage 25 ~ 50VDC Capacitance Tolerance (120Hz 20C) Leakage Current 20%(M) , 10%(K) 100 (A) After 5 minutes in both directions I : Leakage Current (A) C : Rated Capacitance(F) V : Working Voltage (V) (20C) Surge Voltage (20C) W.V. 25 35 50 S.V. 32 44 63 Dissipation Factor ( tan ) tan ≤ 0.05 (120Hz 20C) Low Temperature Stability Capacitance change shall be within 10% of the value at 25C over operation temperature range. Load Life After 2000 hours application of W.V. and +85C ripple current value , the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) ( The polarity need to exchange every 250 hours ) Capacitance Change 15% of initial. Dissipation Factor 200% of initial specified value Leakage Current initial specified value PART NUMBER SYSTEM BP 50V 120 M TA 22x40 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. ‘R’ denotes decimal point for values less than 10uF Tolerance M - 20%, 10%(K) Package Code TA Tape & Ammo TR Tape & Reel Blank Case size – (D) Diameter x (L) Length in mm (Optional) DIMENSIONS (mm) D F d 10 5.0 0.6 1.5 12.5 5.0 0.6 1.5 16 7.5 0.8 1.5 18 7.5 0.8 1.5 22 10.0 1.0 2.0 Rev. 7a Aluminum Electrolytic Capacitors BP Series (Bi-Polarized, 85°C) MERITEK CASE SIZE & MAX RIPPLE CURRENT Case size E.S.R Max. ripple current V Cap. (uF) Item 2.2 3.3 4.7 6.8 8.2 10 12 18 DxL 10x20 12.5x25 12.5x25 16x31.5 16x31.5 16x35.5 18x35.5 22x40 25 E.S.R 30.14 20.10 14.11 9.75 8.09 6.63 5.53 3.68 R.C. 2.80 4.50 5.50 7.50 8.50 10.00 11.50 13.00 DxL 12.5x25 16x25 16x31.5 16x35.5 18x35.5 18x35.5 22x40 35 E.S.R. 30.14 20.10 14.11 9.75 8.09 6.63 5.53 R.C. 3.50 4.80 6.50 8.00 9.50 10.50 12.00 : DxL :Ω : A(p-p) DxL 12.5x25 16x25 16x31.5 16x35.5 18x35.5 18x35.5 22x40 (mm) 20C 120Hz 85C 15.75kHz 50 E.S.R. 30.14 20.10 14.11 9.75 8.09 6.63 5.53 R.C. 3.50 4.80 6.50 8.00 9.50 10.50 12.00 Rev. 7a BP Series Aluminum Electrolytic Capacitors (Bi-Polarized, 85°C) MERITEK TAPING SPECIFICATION Lead taping is designed for automatic insertion equipment. Capacitors with case size of 18mm x 35.5mm or smaller are available in taping type. DIMENSIONS (Ø4~ Ø10) Item Symbol Case Size 4x5 5 x 5 6.3x5 8 x 5 4x7 5 x 7 6.3x7 8 x 7 5 x 11 6.3x11 8 x 11.5 10x12.5 10x16 0.45 0.5 10x18 10x20 Tolerance Lead wire diameter d Body height A Intervals of bodies P 12.7 ±1.0 Intervals of punched holes P0 12.7 ±0.2 6.0 8.0 12.5 13 14 0.6 ±0.05 17.5 19.5 21.5 MAX Fig 1. Fig 4. 3.85 Distance between holes and lead wire P1 5.35 5.1 5.1 5.6 Distance between holes and bodies 5.35 5.1 5.1 5.35 5.1 5.1 5.6 ±0.7 5.1 5.35 5.1 4.6 5.35 5.1 P2 F 6.35 2.0 2.5 2.5 2.0 2.5 2.5 Fig 2. Fig 3. 4.6 ±1.0 Fig 1. Fig 4. 5.0 Distance between lead and lead Remark +0.8 -0.2 2.5 Fig 2. F1:5.0 +0.5 Fig 3. F1:5.0 +0.5 -1.0 1.5 2.0 2.5 2.5 1.5 2.0 2.5 3.5 2.0 2.5 3.5 -1.0 Base tape width W W0 18.0 ±0.5 12.5 MIN Deviation between holes and base tape W1 9.0 ±0.5 Deviation between adhesive and base tape W2 1.5 MAX Adhesive tape width 17.5 18.5 20.0 17.5 18.5 18.5 18.5 Distance between body bottom and tape center H Lead wire clinched height H0 Distance between body top and tape center H1 Punched hole diameter D0 4.0 ±0.3 Length of not good lead slit L 11.0 MAX Base and adhesive tape thickness t 0.6 ±0.3 Deviation of body alignment ∆h 0 ±2.0 Deviation of body alignment ∆h1 0 ±1.0 ±0.5 16.0 24.5 Fig 1. Fig 4. Fig 2. Fig 3. ±0.5 27.5 32.5 33.0 36.0 38.0 41.0 MAX Rev. 7a BP Series Aluminum Electrolytic Capacitors (Bi-Polarized, 85°C) MERITEK DIMENSIONS (Ø12.5~ Ø18) Item Lead wire diameter d Body height A Intervals of bodies P Intervals of punched holes P0 Distance between holes and lead wire P1 Distance between holes and bodies Distance between lead and lead Case Size Symbol 12.5 x 20 12.5 x 25 21.5 26.5 12.5 x 30 16 x 25 16 x 31.5 31.5 26.5 33 0.6 16 x 35.5 18 x 35.5 0.8 15.0 37.0 3.75 5.0 ±0.7 ±1.0 +0.8 -0.2 7.5 Base tape width Adhesive tape width W W0 18.0 15.0 ±0.5 MIN Deviation between holes and base tape W1 9.0 ±0.5 Deviation between adhesive and base tape W2 1.5 MAX Distance between body bottom and tape center H Distance between body top and tape center H1 Punched hole diameter Length of not good lead slit 16.5 40.5 45.5 18.5 50.5 46.5 53.5 ±0.5 56.5 56.5 Fig 5. Fig 6. MAX D0 4.0 ±0.3 L 11.0 MAX t 0.6 ±0.3 Deviation of body alignment ∆h 0 ±2.0 Deviation of body alignment ∆h1 0 ±1.0 Base and adhesive tape thickness Fig 5. Fig 6. ±0.2 7.5 F MAX ±1.0 15.0 P2 Remark ±0.05 37.0 30.0 5.0 Tolerance Rev. 7a Aluminum Electrolytic Capacitors BP Series (Bi-Polarized, 85°C) MERITEK Rev. 7a Aluminum Electrolytic Capacitors BP Series (Bi-Polarized, 85°C) MERITEK SOLDERABILITY Capacitor lead wire is dipping into the oven, and then, dipping in 245±3℃, solder liquid for 3±0.5 seconds, the substance is above the liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least. RESISTANCE TO SOLDERING HEAT Put capacitor lead wire to dip 260±5℃ in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room temperature, should do final measurements, the values are following: (A) Capacitance change: ≦ ±10% of initial value (B) Dissipation factor: ≦ initial specified value (C) Leakage current: ≦ initial specified value (D) Visual: No damage Rev. 7a