Aluminum Electrolytic Capacitors NPC Series ( Non Polarity, For Twinkling Light) MERITEK FEATURES Suitable for the direction light of automobile and motorcycle SPECIFICATIONS Item Characteristic Operating Temp Range - 40 ~ +85C Rated Working Voltage 13VDC Capacitance Tolerance (120Hz 20C) Leakage Current 10%(K) 20%(M) +20/-10%(V) I 1000(uA) (20C) *Under 100 Ω resister series and rated voltage applied whichever after 3 minutes I : Leakage Current (A) C : Rated Capacitance(F) V : Working Voltage (V) Dissipation Factor ( tan ) tan ≤ 0.50 (120Hz 20C) PART NUMBER SYSTEM DIMENSIONS (mm) NPC 13V 152 M TR 10x25 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. ‘R’ denotes decimal point for values less than 10uF Tolerance K - 10%, M - 20%, V - +20/-10% Package Code TA TR Tape & Ammo Tape & Reel Blank Case size – (D) Diameter x (L) Length in mm (Optional) D F d a 10 5.0 0.6 1.5 12.5 5.0 0.6 1.5 CASE SIZE Cap. (uF) V Item 1500 1700 2200 Case size: DxL 13 DxL 10x25 12.5x20 12.5x25 (mm) Rev. 7a NPC Series Aluminum Electrolytic Capacitors ( Non Polarity, For Twinkling Light) MERITEK TAPING SPECIFICATION Lead taping is designed for automatic insertion equipment. Capacitors with case size of 18mm x 35.5mm or smaller are available in taping type. DIMENSIONS (Ø4~ Ø10) Item Symbol Case Size 4x5 5 x 5 6.3x5 8 x 5 4x7 5 x 7 6.3x7 8 x 7 5 x 11 6.3x11 8 x 11.5 10x12.5 10x16 0.45 0.5 10x18 10x20 Tolerance Lead wire diameter d Body height A Intervals of bodies P 12.7 ±1.0 Intervals of punched holes P0 12.7 ±0.2 6.0 8.0 12.5 13 14 0.6 ±0.05 17.5 19.5 21.5 MAX 3.85 Distance between holes and lead wire P1 5.35 5.1 5.1 5.6 Distance between holes and bodies 5.35 5.1 5.35 5.1 5.1 5.6 5.1 ±0.7 5.1 5.35 5.1 4.6 5.35 5.1 P2 F 6.35 2.0 2.5 2.5 2.0 2.5 2.5 Fig 1. Fig 4. Fig 2. Fig 3. 4.6 ±1.0 Fig 1. Fig 4. 5.0 Distance between lead and lead Remark +0.8 -0.2 2.5 Fig 2. F1:5.0 +0.5 -1.0 1.5 2.0 2.5 2.5 1.5 Fig 3. F1:5.0 2.0 2.5 3.5 2.0 2.5 3.5 +0.5 -1.0 Base tape width W W0 18.0 ±0.5 12.5 MIN Deviation between holes and base tape W1 9.0 ±0.5 Deviation between adhesive and base tape W2 1.5 MAX Adhesive tape width 17.5 18.5 20.0 17.5 18.5 18.5 18.5 Distance between body bottom and tape center H Lead wire clinched height H0 Distance between body top and tape center H1 Punched hole diameter D0 4.0 ±0.3 Length of not good lead slit L 11.0 MAX Base and adhesive tape thickness t 0.6 ±0.3 Deviation of body alignment ∆h 0 ±2.0 Deviation of body alignment ∆h1 0 ±1.0 ±0.5 16.0 24.5 Fig 1. Fig 4. Fig 2. Fig 3. ±0.5 27.5 32.5 33.0 36.0 38.0 41.0 MAX Rev. 7a NPC Series Aluminum Electrolytic Capacitors ( Non Polarity, For Twinkling Light) MERITEK DIMENSIONS (Ø12.5~ Ø18) Item Lead wire diameter d Body height A Intervals of bodies P Intervals of punched holes Distance between holes and lead wire 12.5 x 25 21.5 26.5 12.5 x 30 16 x 25 16 x 31.5 31.5 26.5 33 0.6 Distance between lead and lead F 16 x 35.5 18 x 35.5 0.8 15.0 37.0 30.0 5.0 ±0.7 ±1.0 +0.8 -0.2 7.5 W W0 18.0 ±0.5 15.0 MIN W1 9.0 ±0.5 W2 1.5 MAX Distance between body bottom and tape center H Distance between body top and tape center H1 Punched hole diameter D0 4.0 ±0.3 Length of not good lead slit L 11.0 MAX t 0.6 ±0.3 ∆h 0 ±2.0 ∆h1 0 ±1.0 Base and adhesive tape thickness Deviation of body alignment Deviation of body alignment 40.5 45.5 18.5 50.5 46.5 Fig 5. Fig 6. ±0.2 7.5 16.5 Remark MAX ±1.0 3.75 5.0 Tolerance ±0.05 37.0 15.0 P1 P2 Adhesive tape width Deviation between holes and base tape Deviation between adhesive and base tape 12.5 x 20 P0 Distance between holes and bodies Base tape width Case Size Symbol 53.5 ±0.5 56.5 56.5 Fig 5. Fig 6. MAX Rev. 7a Aluminum Electrolytic Capacitors NPC Series ( Non Polarity, For Twinkling Light) MERITEK Rev. 7a Aluminum Electrolytic Capacitors NPC Series ( Non Polarity, For Twinkling Light) MERITEK SOLDERABILITY Capacitor lead wire is dipping into the oven, and then, dipping in 245±3℃, solder liquid for 3±0.5 seconds, the substance is above the liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least. RESISTANCE TO SOLDERING HEAT Put capacitor lead wire to dip 260±5℃ in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room temperature, should do final measurements, the values are following: (A) Capacitance change: ≦ ±10% of initial value (B) Dissipation factor: ≦ initial specified value (C) Leakage current: ≦ initial specified value (D) Visual: No damage Rev. 7a