Surface Mount Aluminum Electrolytic Capacitors SRB Series (General Purpose) MERITEK RoHS FEATURES Height : 5.4mm. Load life : 85°C 2000 hours. SPECIFICATIONS Item Characteristic Operation Temperature Range -40 ~ +85°C Rated Working Voltage 4 ~ 100VDC Capacitance Tolerance ±20%(M) (120Hz 20°C) Leakage Current I ≤0.01CV or 3 ( µA ) *Whichever is greater after 2 minutes (20°C) I: Leakage Current ( µA) C: Rated Capacitance ( µF) Surge Voltage (20°C) V: Working Voltage (V) W.V. 4 6.3 10 16 25 35 50 63 100 S.V. 5 8 13 20 32 44 63 79 125 Add 0.02 per 1000 µF for more than 1000 µF Dissipation Factor (tan δ) (120Hz 20°C) W.V. 4 6.3 10 16 25 35 50 63 100 tan δ 0.35 0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10 Impedance ratio at 120Hz Low Temperature Stability Rated Voltage (V) 4 6.3 10 16 25 35 50 63 100 -25°C / +20°C 7 4 3 2 2 2 2 2 2 -40°C / +20°C 15 8 6 4 4 3 3 3 3 After 2000 hours application of W.V. and +85°C ripple current value, the capacitor shall meet the following limits. (DC + ripple peak voltage ≤ rate working voltage) Load Life Capacitance Change ≤ ±20% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage current ≤ initial specified value At +85°C, no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. (With voltage treatment) Shelf Life Capacitors placed on a 250°C hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions after being cooled to room temperature. Resistance to Soldering Heat Capacitance Change ≤ ±10% of initial value Dissipation Factor ≤ initial specified value Leakage current ≤ initial specified value PART NUMBERING SYSTEM SRB 100V Meritek Series Voltage Capacitance Capacitance expressed in microfarads (μF). First two digits are significant figures. Third digit denotes number of zeros. 'R' denotes decimal point for values less than 10 μF Tolerance M=±20% Case Diameter Code Case Height (mm) The third digit denotes the first decimal place For example, 102 = 10.2mm 330 M J 102 Case Diameter Code B D E F H J ΦD Φ 3.0 Φ 4.0 Φ 5.0 Φ 6.3 Φ 8.0 Φ 10.0 Rev. 7a Surface Mount Aluminum Electrolytic Capacitors SRB Series (General Purpose) MERITEK RoHS DIMENSIONS (mm) ΦD Φ 4.0 Φ 5.0 Φ 6.3 Φ 8.0 Φ 8.0 Φ 10.0 L 5.4 5.4 5.4 6.2 10.2 10.2 A H 4.3 5.5MAX 5.3 6.5MAX 6.6 7.8MAX 8.3 9.5MAX 8.3 10.0MAX 10.3 12.0MAX I 1.8 2.2 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 2.1 2.2 3.1 4.6 K +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 0.70 ± 0.2 0.70 ± 0.2 CASE SIZE & MAX RIPPLE CURRENT Cap. (uF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 V Item 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 4 4x5.4 4x5.4 29 35 4x5.4 5x5.4 5x5.4 27 38 46 100 101 5x5.4 60 6.3x5.4 70 220 330 470 1000 1500 221 331 471 102 152 6.3x5.4 8x6.2 8x10.2 8x10.2 10x10.2 80 140 210 300 440 8x6.2 8x6.2 8x10.2 10x10.2 10x10.2 150 180 260 460 560 Cap. (uF) 3.3 4.7 10 22 33 47 100 V Item 3R3 4R7 100 220 330 470 101 DxL R.C. 63 DxL R.C. 8x10.2 8x10.2 10x10.2 10x10.2 120 140 190 280 6.3 DxL R.C. 10 DxL R.C. 5x5.4 5x5.4 6.3x5.4 6.3x5.4 8x6.2 8x6.2 8x10.2 10x10.2 10x10.2 36 44 60 80 130 190 290 420 610 Case size Max ripple current 16 DxL R.C. 4x5.4 5x5.4 6.3x5.4 6.3x5.4 6.3x5.4 8x6.2 8x10.2 8x10.2 10x10.2 24 40 55 65 90 140 260 310 450 25 DxL R.C. 35 DxL R.C. :D xL (mm) : mA(rms) 85°C 120Hz 4x5.4 5x5.4 6.3x5.4 6.3x5.4 8x6.2 17 29 49 60 100 4x5.4 5x5.4 6.3x5.4 8x6.2 8x6.2 19 31 55 120 140 50 DxL R.C. 4x5.4 3 4x5.4 4 4x5.4 5 4x5.4 6 4x5.4 9 4x5.4 13 4x5.4 16 5x5.4 21 6.3x5.4 36 8x6.2 110 8x6.2 130 8x10.2 190 8x6.2 150 8x10.2 250 10x10.2 310 8x10.2 10x10.2 270 450 10x10.2 10x10.2 440 540 10x10.2 460 100 DxL R.C. 8x6.2 41 8x10.2 60 8x10.2 85 10x10.2 150 10x10.2 180 Rev. 7a Surface Mount Aluminum Electrolytic Capacitors SRB Series (General Purpose) MERITEK RoHS TAPING DxL Ø4x5.4 Ø5x5.4 Ø6.3x5.4 Ø4x5.8 Ø5x5.8 Ø6.3x5.8 Ø6.3x7.7 Ø8x6.2 Ø8x10.2 Ø10x10.2 W ±0.3 12.0 12.0 16.0 12.0 12.0 16.0 16.0 16.0 24.0 24.0 A ±0.2 4.7 5.7 7.0 4.7 5.7 7.0 7.0 8.7 8.7 10.7 B ±0.2 4.7 5.7 7.0 4.7 5.7 7.0 7.0 8.7 8.7 10.7 P0 ±0.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 P1 ±0.1 8.0 12.0 12.0 8.0 12.0 12.0 12.0 12.0 16.0 16.0 P2 ±0.1 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 F ±0.1 5.5 5.5 7.5 5.5 5.5 7.5 7.5 7.5 11.5 11.5 ØD0 ±0.1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 t1 ±0.1 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 E ±0.1 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 t2 ±0.2 5.7 5.7 5.7 6.3 6.4 6.4 8.2 6.8 11.0 11.0 PACKAGE DxL Ø4 Ø5 Ø6.3 Ø8x6.2 Ø8x10.2 Ø10x10.2 A ±2.0 380 380 380 380 380 B MIN 50 50 50 50 50 C ±0.5 13 13 13 13 13 D ±0.8 21 21 21 21 21 E ±0.5 2.0 2.0 2.0 2.0 2.0 W ±1.0 14.0 18.0 18.0 26.0 26.0 T ±1.0 20.0 24.0 24.0 32.0 32.0 t ±0.5 3.0 3.0 3.0 3.0 3.0 Rev. 7a Surface Mount Aluminum Electrolytic Capacitors SRB Series (General Purpose) MERITEK RoHS PERMISSBLE REFLOW CONDITION AIR REFLOW AND IR REFLOW Preheat: Within 120sec., 190°C or less. Soldering Time: Within 50 sec., 230°C Peak Temperature: Less than 250°C, within 10 sec. Possible Reflow Cycle: 2 Cycles The final test values should be as following: (A) Capacitance change: ≦ ±10% of initial value (B) Dissipation factor: ≦ initial specified value (C) Leakage current: ≦ initial specified value (D) Visual: No damage Rev. 7a