OV-0100-C7 Low Power Clock Oscillator 100.000 kHz DIMENSIONS Package: Recommended Solder Pad: 3,2 1,0 0,75 0,8 0,4 0,55 0,55 1.0 max 1,5 1,7 0,8 0,75 1,0 100% leadfree, RoHS - compliant Oscillator with integrated XTAL Very tight frequency tolerance High shock and vibration resistance Very low power consumption Low aging rate Miniature ceramic SMT package Available for Medical Implantable applications All dimensions in mm typical DESCRIPTION: This very small SMD ceramic package has been specially designed to combine the 100.000 kHz crystal unit with the CMOS-based oscillator circuit. Ultra Low Power consumption, as low as 500 nA, are made possible through 100.000 kHz Tuning-Fork-Crystals and sophisticated CMOS-circuitry. For pick-and-place equipment, the parts are available in 12 mm tape: 7” (178 mm) reel with 1'000 oscillators 7” (178 mm) reel with 3'000 oscillators BLOCK DIAGRAM: 4 VDD 2 GND OSC 1 CLKOUT OUTPUT CONTROL 3 CLKOE PIN CONNECTIONS TOP VIEW: 100.000 kHz CRYSTAL Production Date Code #4 #3 Pin 1 Index 1 2 M1537F 0100 #1 Pin 3 4 #2 Part Designation Pinout Connection # 1 # 2 # CLKOUT Frequency output CLKOUT GND GND Ground 3 CLKOE CLKOE CLK output enable # 4 VDD VDD Power Supply Voltage ELECTRICAL CHARACTERISTICS AT 25°C: Output Frequency Frequency tolerance 1) F 100.000 kHz ΔF/F +/-20 ppm Supply voltage VDD 1.2 – 5.5 V 2) IDD 0.5 / 0.75 µA 40 / 60 % Output voltage (high) 3) VOH VDD –0.4 V Output voltage (low) 4) VOL Gnd +0.4 V HCMOS 15 pF IOH 1 mA Current consumption (typ./max.) Duty cycle (min./max.) Output Load Output Current IOL -1 mA Output rise time (max.) 5) tr 70 ns Output fall time (max.) 5) tf 70 ns Start up time (max.) tstart 0.5 s CLK Output Enable (High) VIH 80% VDD min. V CLK Output Disable (Low) VIL 20% VDD max. V +/-1.5 ppm/V ΔF/F +/-3 ppm Turnover temperature (typ.) T0 18 +/-5 °C Frequency vs. temperature ΔF/F0 –0.035 ppm/°C² (T - T0)2 +/-10% ppm Voltage coefficient (max.) Aging first year max. @ 25°C 1) Tighter tolerances on request. 2) VDD = 3.0 V, CLKOE = LOW. 3) IOH = –1.0 mA. 4) IOL = 1.0 mA. 5) CL = 10 pF, 10% to 90%. ENVIRONMENTAL CHARACTERISTICS: TERMINATIONS AND PROCESSING: Conditions Storage temp. range –55 to +125°C TA Operating temperature range –40 to +85°C Max. Dev. Shock resistance ΔF/F 5000 g, 0.3 ms, ½ sine +/-5 ppm Vibration resistance ΔF/F 20 g / 10–2000 Hz +/-5 ppm Package-Type Termination Processing Ceramic For SMD mounting Au plated pads Reflow soldering 260°C / 20 s max. FREQUENCY TEMPERATURE 20.0 CHARACTERISTICS: 0.0 -20.0 ΔF/F [ppm] -40.0 -60.0 -80.0 -100.0 -120.0 -140.0 -160.0 -180.0 -60 -40 -20 0 20 40 60 80 100 T [°C] Tuning Fork Crystal All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 1.0/04.2016