OV-0100-C8 Low Power Clock Oscillator 100.000 kHz DIMENSIONS Package: Recommended Solder Pad: 2,0 1,1 0,7 0,45 0,3 Oscillator with integrated XTAL Very tight frequency tolerance Ultra-miniature ceramic package High shock and vibration resistance Very low power consumption Low aging rate Available for Medical Implantable applications max. 0,85 100% leadfree, RoHS - compliant 0,7 0,45 1,2 0,45 0,7 0,45 0,7 All dimensions in mm typical DESCRIPTION: This very small SMD ceramic package has been specially designed to combine the 100.000 kHz crystal unit with the CMOS-based oscillator circuit. Ultra Low Power consumption, as low as 700 nA, are made possible through 100.000 kHz Tuning-Fork-Crystals and sophisticated CMOS-circuitry. For pick-and-place equipment, the parts are available in 8 mm tape: 7” (178 mm) reel with 1'000 oscillators 7” (178 mm) reel with 3'000 oscillators BLOCK DIAGRAM: 4 VDD 2 GND OSC 1 CLKOUT OUTPUT CONTROL 3 CLKOE PIN CONNECTIONS TOP VIEW: 100.000 kHz CRYSTAL Production Date Code #4 #3 Pin 1 2 M1537F 3 4 #1 Pin 1 Index #2 Pinout Connection # 1 # 2 # CLKOUT Frequency output CLKOUT GND GND Ground 3 CLKOE CLKOE CLK output enable # 4 VDDVDD Power Supply Voltage ELECTRICAL CHARACTERISTICS AT 25°C: Output Frequency Frequency tolerance 1) F 100.000 kHz ΔF/F +/-100 ppm Supply voltage VDD 1.6 – 5.5 V 2) IDD 0.7 / 0.95 µA 40 / 60 % Output voltage (high) 3) VOH VDD –0.4 V Output voltage (low) 4) VOL Gnd +0.4 V HCMOS 15 pF IOH 1 mA Current consumption (typ./max.) Duty cycle (min./max.) Output Load Output Current IOL -1 mA Output rise time (max.) 5) tr 70 ns Output fall time (max.) 5) tf 70 ns Start up time (max.) tstart 0.5 s CLK Output Enable (High) VIH 80% VDD min. V CLK Output Disable (Low) VIL 20% VDD max. V +/-3 ppm/V ΔF/F +/-3 ppm Turnover temperature (typ.) T0 28 +/-5 °C Frequency vs. temperature ΔF/F0 –0.035 ppm/°C² (T - T0)2 +/-10% ppm Voltage coefficient (max.) Aging first year max. @ 25°C 1) Tighter tolerances on request. 2) VDD = 3.0 V, CLKOE = LOW. 3) IOH = –1.0 mA. 4) IOL = 1.0 mA. 5) CL = 10 pF, 10% to 90%. ENVIRONMENTAL CHARACTERISTICS: TERMINATIONS AND PROCESSING: Conditions Storage temp. range –55 to +125°C TA Operating temperature range –40 to +85°C Max. Dev. Shock resistance ΔF/F 5000 g, 0.3 ms, ½ sine +/-5 ppm Vibration resistance ΔF/F 20 g / 10–2000 Hz +/-5 ppm Package-Type Termination Processing Ceramic For SMD mounting Au plated pads Reflow soldering 260°C / 20 s max. FREQUENCY TEMPERATURE 20.0 CHARACTERISTICS: 0.0 -20.0 ΔF/F [ppm] -40.0 -60.0 -80.0 -100.0 -120.0 -140.0 -160.0 -180.0 -60 -40 -20 0 20 40 60 80 100 T [°C] Tuning Fork Crystal All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 1.0/04.2016