High Voltage Ceramic Capacitors 500V-4KV HV Series MERITEK SPECIFICATIONS Operating Temperature SL and Y5P: -30oC to +85 oC Z5U and Z5V: +10oC to +85oC Temperature Characteristic Capacitance SL: P350 to N1000 Y5P: ±10% Z5U*: +22/-56% Z5V: +22/-82% SL: Measured at 1 ±0.1MHz, 1Vrms max. at 25oC Y5P, Z5U and Z5V: Measured at 1 ±0.1KHz, 1Vrms max. at 25oC Rated voltage 500VDC to 4000VDC Quality and dissipation factor SL: <30pF >400 + 20 oC min., =30pF >1000 Y5P and Z5U: 2.5% max. Z5V: 5.0% max. Tested voltage 500V: 250% rated voltage 1000V to 4000V: 150% rated voltage Insulation resistance 10,000 Mega ohms min. at 500VDC 60 sec. charging Coating material 500V to 2000V phenolic or epoxy resin coating = 3000V epoxy resin (94V-0) PART NUMBERING SYSTEM Y5P HV 471 K 2KV 6 B 1 High voltage series Temperature characteristics Capacitance CODE 1R5 330 201 202 333 104 1.5pF 33pF 200pF 2000pF .033μF 0.1μF Capacitance tolerance CODE Tolerance Applicable T.C. Available Capacitances C D ±0.25pF ±0.5pF NPO-N750 NPO-N750 0.5pF-5pF 0.5pF-10pF J ±5% NPO-N1500 Over 5pF K ±10% NPO-N1500, Y5E, Y5P Over 10pF M ±20% NPO-N1500, Y5E, Y5P, Z5U * Over 10pF S +50/-20% Z5U* Over 1000pF Z +80/-20% Z5U*, Z5V Over 1000pF P +100/-0% Z5U*, Z5V Over 1000pF Rated voltage Lead spacing CODE 5 6 7 9 5.08mm 6.35mm 7.62mm 9.52mm Packaging code CODE B Bulk R Tape & Reel F Tape & Ammo (Flat) Lead type Complete Durez 1 Coverage Leads D Complete Durez Style 1,2 and 3 500V 1000V 4000V Outward Kink 4 and Cut Leads D 5 and Cut Leads D P P 4.75 0.75 (0.19 .03") F Inside Kink 3 Coverage and Cut Leads Leads D P P 25.4 (1.00") max. Exposed Disc and 2 Cut Leads D 4.75 0.75 (0.19 .03") F P=2.0(.078")max P=3.0(.118")max F F: F: 0.8(.03") 1.5(.06") 4.75 (0.19 0.75 .03") Style 4 and 5 500V 1000V 4000V P F 1 (.04") min. 4.75 (0.19 P=4.0(.16")max P=5.0(.197")max 0.75 .03") F: F: F 2 (.08") max. 0.8(.03") 1.5(.06") Specifications are subject to change without notice. rev.6c High Voltage Ceramic Capacitors 500V-4KV RATED VOLTAGE (VDC) 1000V MERITEK TEMP CHARACTERISTICS / CAPACITANCE (pF) DIMENSIONS (mm) SL Y5P (B) Z5U* (E) Z5V (F) D max. 1-82 83-150 100-820 1000-1500 100-2200 3300 470-2200 3300-5600 6 7 180 2200 4700-5600 6800 8 6800 10000 9 3300 8200 10000 15000 22000 10 12 680-820 4700 15000 33000 14 1000 10000 22000 47000 16 220 500V HV Series 270-330 390-560 33000 56000 18 47000 100000 22 1-82 100-470 100-1500 470-2200 6 100-120 560-820 2200 3300 7 150 180 1000 1500 3300 4700 4700 5600 8 9 220 2200 5600-6800 6800 10 270-390 470-560 3300 4700 8200-10000 - 8200-15000 12 14 680-820 1000 5600-6800 8200-10000 15000 22000 22000 33000 16 18 - 2000V 3000V d∅ 0.5 ±.05 4 5 0.6 ±.05 6 0.6 ±.05 7 0.6 ±.05 20 47000 47000 22 1-50 56-82 100-330 390 100-680 820-1000 470-1000 1500 7 8 100-120 470-560 1500 2200 9 150 680-820 2200 3300 10 180 220 1000 1500 3300 4700-5600 4700-5600 6800-8200 12 14 270-390 2200 6800-8200 10000 16 470-560 3300 10000 15000 18 680 820 1000 4700 5600-6800 8200 15000 22000 22000 33000 20 22 24 1-33 39-47 100-220 330 100-560 680-820 470-1000 - 8 9 56-68 470 1000-1500 1500 10 82-100 560-680 2200 2200 12 120-150 180-220 820 1000-1500 3300-4700 3300 4700 14 16 270-330 2200 6800-8200 18 470 3300 8200 10000 20 560 680 4700 10000 - 15000 22 24 15000 22000 26 820 T NPO and X7R dielectrics are also available. *Z5U will be offered upon request due to the non-standard specification, please check with MERITEK. High Voltage Ceramic Capacitors 500V-4KV RATED VOLTAGE DIMENSIONS (mm) SL Y5P (B) Z5U* (E) Z5V (F) 470-1000 1-33 100-220 100-680 47-56 330 820 68 470 1000 D max. 1500 560 1500 2200 12 2200 3300 14 150-180 1000 3300 4700 16 220 1500 4700 - 18 270-330 2200 - - 20 390 3300 - 10000 22 470 - 10000 - 24 560-680 4700 15000 15000 26 Dissipation Factor (25oC, 1KHz) 8 0.6 ±.05 10 680-820 Operating Temperature Range d∅ 8 120 Temperature Characteristic T 9 82-100 SPECIFICATIONS COG / NPO X7R Z5U* 0 ±30ppm/ oC ±15% +22/-56% (+10oC to 85 oC ) -55oC to +125oC -55oC to +125oC +10oC to +85 oC 0.15% max. at 1Vrms 2.5% max. at 1Vrms 3.5% max. at 0.5Vrms Insulation Resistance at 25oC, rated voltage (min.) 100K Mega ohms or Dielectric Withstanding Voltage (50mA max., 5 sec.) 2.5 x Rated Voltage Life Test (1,000 hours) MERITEK TEMP CHARACTERISTICS / CAPACITANCE (pF) (VDC) 4000V HV Series 1000 Mega ohms x μF whichever is less 2 x Rated Voltage at +125 oC 100K Mega ohms or 1000 Mega ohms x μF whichever is less 10K Mega ohms or 500 Mega ohms x μF whichever is less 2.5 x Rated Voltage 2.5 x Rated Voltage 2 x Rated Voltage at +125 oC 1.5 x Rated Voltage at +85oC