Ceramic Disc Capacitors CC Series MERITEK CC series ceramic disc capacitors are produced by sandwiching a ceramic dielectric layer between two electrodes. An epoxy or phenolic coating is applied by means of a spray or dipping process. Applications include bypass, coupling and resonant functions. PART NUMBERING SYSTEM CC NPO 101 J 50V 5 B 1 Ceramic Disc Capacitors Series Temperature Characteristic Capacitance CODE 1R5 330 201 202 333 104 1.5pF 33pF 200pF 2000pF 33000pF 0.1μF Tolerance Code Tolerance Applicable T.C. Available Capacitances C ±0.25pF NPO-N750 0.5pF-5pF D ±0.5pF NPO-N750 0.5pF-10pF J ±5pF NPO-N1500 Over 5pF K ±10% NPO-N1500, Y5E, Y5P Over 10pF M ±20% NPO-N1500, Y5E, Y5P, Z5U Over 10pF S +50/-20% Z5U Over 1000pF Z +80/-20% Z5U, Z5V Over 1000pF P +100/-0% Z5U, Z5V Over 1000pF Rated Voltage VDC 16V 25V 50V 63V 100V Lead Spacing Code 2 5 6 7 9 Lead Spacing 2.54mm 5.08mm 6.35mm 7.62mm 9.52mm Packaging Code Code Packaging B Bulk Packing R Reel Packaging F Flat Packaging (Tape & Box) Lead Type Specifications are subject to change without notice. rev.6a Ceramic Disc Capacitors Class 1 CC Series MERITEK Temperature compensating disc capacitors have a ceramic dielectric that is formulated to provide predictable linear capacitance change versus temperature change. This predictable linear capacitance change allows the temperature compensating disc capacitor to be used in critical circuit applications such as tuned circuits. A full range of values and voltages is available. SPECIFICATIONS o o Operating Temperature -25 C to +85 C Capacitance Measured at 1 ±0.1 MHz, 1Vrms at 25 C Temperature Please refer to Page 4 Rated voltage 50V, 63V and 100V Quality Factor Measured at 1 ±0.1MHz, 1Vrms at 25 C C < 30pF Q=400 + 20C, C > 30pF Q=1000 min. (C = Capacitance) Tested voltage 250% of rated voltage with 50mA charging current max. Insulation resistance 10,000 Mega ohms min. at rated voltage 60 sec. Insulation coating Phenolic coating applied by a wet dip method o o CAPACITANCE R ANGE (pF) 100WVDC & Under TEMPERATURE CHARACTERISTIC Color Code Black Red Orange Yellow Green Blue Violet D∅ ±1mm NPO N75/N80 N150 N220 N330 N470 N750 SL (GP) N1500 4 1-24 1-12 1-24 1-27 1-27 1-33 1-43 1-68 27-56 5 25-47 13-22 25-47 28-47 28-47 34-47 44-82 72-100 62-100 6 50-100 24-33 50-100 50-100 50-100 50-100 83-100 120-220 120-220 8 120-150 35-68 120-150 120-150 120-150 120-150 120-150 250-470 250-470 10 180-220 72-130 180-220 180-220 180-220 180-220 180-220 500-620 500-620 12 250-300 140-180 250-300 250-300 250-300 250-300 270-390 680-1000 620-1000 Ceramic Disc Capacitors Class 2 CC Series MERITEK Temperature stable and general-purpose disc capacitors are manufactured from a variety of high K (dielectric constant) ceramic materials. Circuit applications include bypass and coupling functions, wherein a larger amount of capacitance is required and the circuit is less sensitive to capacitance change with temperature variations. A number of dielectrics are offered along with a wide range of capacitance values and voltage ratings. SPECIFICATIONS o o Operating Temperature -30 C to +85 C: Y5E, Y5P o o +10 C to +85 C: V5U, Z5V Capacitance Measured at 1 ±0.1KHz, 1Vrms at 25 C Temperature Y5E: ±4.7% Z5U: +22/-56% Rated voltage 50V, 63V and 100V Quality Factor Measured at 1 ±0.1MHz, 1Vrms at 25 C Y5E, Y5P and Z5U: 2.5% max. Z5V: 5.0% max. Tested voltage 250% of rated voltage with 50mA charging current max. Insulation resistance 10,000 Mega ohms min. at rated voltage 60 sec. Insulation coating Phenolic coating applied by a wet dip method o Y5P: ±10% Z5V: +22/-82% o CAPACITANCE R ANGE (pF) 100WVDC & Under Temperature Characteristic Diameter D∅ ±1mm Y5E Y5P Z5U Z5V 4 100-470 100-1000 1000-2700 1000-5000 5 500-680 1200-1500 3000-3900 5600-8200 6 820-1000 1800-2200 4000-5600 10000 8 1200-2700 2500-5600 6800-10000 22000-33000 10 3000-5600 6200-1000 200000 40000-50000 Ceramic Disc Capacitors Class 3 CC Series MERITEK These semiconductor type ceramic disc capacitors provide economical volumetric efficiency. They are best suited for use in low impedance circuits wherein low insulation resistance can be tolerated. The broad variation of lead styles and the option of radial tape and reel packaging enhance their popularity in bypass and coupling applications. Working voltage options permit selection of the smallest size discs for lower voltage applications SPECIFICATIONS o o Operating Temperature -30 C to +85 C Capacitance Measured at 1 ±0.1MHz, 1Vrms at 25 C Temperature Y5P: ±10% Y5U: +22/-56% 16V, 25V and 50V o Rated voltage Y5T: +22/-33% Y5V: +22/-82% o Dissipation factor Measured at 1 ±0.1KHz, 1Vrms at 25 C 16V: 7.0% max. 25V and 50V: 5.0% max. 250% of rated voltage with 50mA charging current max. Tested voltage Insulation resistance Measured at rated voltage 60 sec. 16V: 500 Mega ohms min. 25V and 50V: 500 Mega ohms x μF min. Phenolic coating applied by a wet dip method Insulation coating CAPACITANCE R ANGE (pF) Temperature Characteristic Working Voltage Y5P 16V Capacitance (μF) 25V Y5T 16V 16V D∅ ±1mm 25V Y5U 50V 16V D∅ ±1mm 25V Y5V 50V 16V D∅ ±1mm 25V 50V D∅ ±1mm 0.01 5 5 5 5 5 5 5 5 5 5 5 5 0.022 6 8 8 5 6 5 5 5 5 5 5 5 0.033 6 8 10 5 6 8 5 6 8 5 5 6 0.047 8 10 12 6 6 8 6 6 8 5 5 6 0.10 10 12 14 6 8 10 6 8 10 6 7 8 Ceramic Disc Capacitors CC Series MERITEK Temperature Coefficient (+25oC to 85oC) EIA Code RS-198 Material Coefficient C0 NP0 0.5-2pF K (±250) 2.1-3.9pF J (±120) 4.0-9.9pF H (±60) S1 U1 N030 N080 K (±250) K (±250) J (±120) J (±120) H (±60) H (±60) G (±30) G (±30) P2 R2 S2 N150 N220 N330 K (±250) K (±250) K (±250) J (±120) J (±120) J (±120) H (±60) H (±60) H (±60) G (±30) G (±30) H (±60) T2 U2 P3 N470 N750 N1500 K (±250) K (±250) K (±250) J (±120) J (±120) K (±250) J (±60) J (±60) K (±250) H (±60) J (±120) K (±250) SL P350-N1000 EIA T EMPERATURE CHARACTERISTIC CHART First Digit is Low Temperature Second Digit is High Temperature Last Digit is Capacitance Change Over Temperature Range From +25oC Reading X Y Z –55 oC –30oC –10 oC 4 5 6 7 8 +65oC +85oC +105oC +125oC +150oC A B C D E F P R S T U V ±1.0% ±1.5% ±2.2% ±3.3% ±4.7% ±7.5% ±10% ±15% ±22% +22/-33% +22/-56% +22/-82% 10pF UP G (±30) Ceramic Disc Capacitors CC Series MERITEK Meritek ceramic capacitors are available in tape and reel packaging for automatic insertion equipment. Meritek's tape and reel specifications comply with the requirements of EIA Standard RS-468. Configurations are also available to meet the specific requirements of Universal, Panasert, and Avisert equipment. Please contact our sales department to discuss your special requirements. Item Description Dimensions & Tolerances Inches mm D Maximum body diameter – Note 1 .472 12.0 T Maximum body thickness .256 6.5 d P Nominal wire diameter Capacitor taping pitch .024 .500 ±.039 0.6 12.7 ±1.0 P0 Sprocket hole pitch .500 ±.039 12.7 ±1.0 P1 Hole center to lead center .152 ±.028 3.85 ±0.7 P2 Hole center to disc center .250 ±.051 6.35 ±1.3 F Lead center to lead center .197 ±.031 5.0 ±0.8 0 ±.079 0 ±2.0 H Front-to-rear disc alignment W Carrier tape width W1 W2 H H0 Hole position on carrier Adhesive tape position max. Hole center to tangent line .709 .354 +.039 -.020 +.030 -.020 .118 .787 +.060 -.040 18.0 9.0 +1.0 -0.5 +0.75 -0.5 3.0 20.0 +1.5 -1.0 Hole center to starting plane .630 ±.020 16.0 ±0.5 Hi Hole center to top of disc 1.270 max. 32.25 max. L Maximum lead cut-out length .433 11.0 L1 Maximum wire protrusion .118 3.0 D0 Sprocket hole diameter T1 Total tape thickness .157 ±.012 .035 0.9 T Maximum lead offset .06 1.5 Notes: 1. 2. 4.0 ±0.3 3. Body diameters to 0.906 inch (23mm) available on 1.0 inch (25.4mm) pitch. Taping pitch of 1.0 inch (25.4mm) available. Wire with a diameter of 0.032 inch (0.8mm) is also available (preferred on larger diameters.)