A Product Line of Diodes Incorporated ZXGD3009DY 40V 1A GATE DRIVER IN SOT363 Description Features ZXGD3009DY is a high-speed, non-inverting single gate driver for switching MOSFETs. It can transfer up to 1A peak source/sink current into the gate for effective charging and discharging of the capacitive load. This gate driver ensures rapid switching of the MOSFET to minimize power losses and distortion in high current switching applications. It can typically drive 500mA into the low gate impedance with just 10mA input from a controller. The turn-on and turn-off switching behavior of the MOSFET can be individually tailored to suit an application. In particular, by defining the switching characteristics appropriately, EMI and cross conduction problems can be reduced. High-Gain Buffer with Typically 500mA Output from 10mA Input Emitter-Follower that is Rugged to Latch-Up/Shoot-Through Issues Wide Supply Voltage to Minimize On-Losses Separate Source and Sink Outputs for Independent Control of MOSFET Turn-On and Turn-Off Times Optimized Pin-Out to Simplify PCB Layout and Reduce Parasitic Trace Inductances Near-Zero Quiescent Supply Current Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Applications Mechanical Data Power MOSFET Gate Driving in: Power Supplies DC-DC Converters Amplifier Output Stages Case: SOT363 Case material: Molded Plastic, “Green” Molding Compound. UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads. Solderable per MIL-STD-202, Method 208 Weight: 0.018 grams (Approximate) SOT363 VCC SOURCE Not Internally Connected IN SINK VEE Internal Device Schematic Pin Name VCC IN VEE SOURCE SINK Pin Function Supply Voltage High Driver Input Supply Voltage Low Source Current Output Sink Current Output Top View Pin-Out Top View Ordering Information (Note 4) Product ZXGD3009DYTA Notes: Marking 3009 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information 3009 ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 3009 = Product Type Marking Code 1 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol Value Unit Supply Voltage, with Respect to VEE Characteristic VCC 40 V Input Voltage, with Respect to VEE VIN 40 V V(source-sink) ±7 V Peak Pulsed Output Current (Source and Sink) IOM ±2 A Peak Pulsed Input Current IIM ±1 A Value Unit Output Difference Voltage (Source – Sink) Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Symbol (Notes 5 & 7) (Notes 6 & 7) (Notes 5 & 7) (Notes 6 & 7) Thermal Resistance, Junction to Lead (Note 8) Operating and Storage Temperature Range 320 277 391 450 PD RθJA RθJL 350 TJ, TSTG -55 to +150 mW °C/W °C ESD Ratings (Note 9) Characteristics Electrostatic Discharge – Human Body Model Electrostatic Discharge – Machine Model Notes: Symbols Value Unit JEDEC Class ESD HBM ESD MM 4,000 400 V V 3A C 5. For a device mounted with pin 1 (VCC) and pin 3 (VEE) on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady-state. The heatsink is split in half with pin 1 (VCC) and pin 3 (VEE) connected separately to each half. 6. Same as Note 5, except the device is mounted on minimum recommended pad layout. 7. For device with two active die running at equal power. 8. Thermal resistance from junction to solder-point at the end of each lead on pin 1 (VCC) and pin 3 (VEE). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 2 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Electrical Characteristics Characteristic (@TA = +25°C, unless otherwise specified.) Symbol Output Voltage, High VOH Output Voltage, Low VOL Min Typ VCC - 0.8 VCC - 0.4 - Max — Unit V VEE + 0.2 VEE + 0.5 I(sink) = 1µA, VIN = VEE 40 — 40 — — — — 20 — — 20 I(source)M — 0.98 — I(sink)M — 0.78 — Peak Pulsed Source Current Peak Pulsed Sink Current I(source)M I(sink)M — — 1.58 1.38 — — A Peak Pulsed Source Current with Varying Input Resistances I(source)M — 0.74 0.175 0.019 — A Peak Pulsed Sink Current with Varying Input Resistances I(sink)M — 1.05 0.22 0.025 — A Switching Times with Low Input Resistance td(rise) tr td(fall) tf — 3.8 15 4 15 — ns Switching Times with Low Load Capacitance CL = 1nF td(rise) tr td(fall) tf — 18 36 16 40 — ns — 47 210 39 240 — ns Supply Breakdown Voltage Quiescent Supply Current Peak Pulsed Source Current Peak Pulsed Sink Current Switching Times with High Load Capacitance CL = 10nF ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 BVCC IQ td(rise) tr td(fall) tf 3 of 8 www.diodes.com — Test Condition I(source) = 1µA, VIN = VCC V IQ = 100µA, VIN = VCC IQ = 100µA, VIN = VEE = 0V nA VCC = 32V, VIN = VCC VCC= 32V, VIN = VEE = 0V A IIN= 10mA, VCC = 5V, VOUT= 0V IIN=-10mA, VEE = 0V, VOUT= 5V IIN= 50mA, VCC = 5V, VOUT= 0V IIN=-50mA, VEE = 0V, VOUT= 5V VCC = 15V, VEE = 0V RIN = 100Ω VIN = 15V RIN = 1kΩ CL =1nF, RL = 0.18Ω RIN = 10kΩ RSOURCE = 0Ω, RSINK = 0Ω VCC = 15V, VEE = 0V RIN = 100Ω VIN = 15V RIN = 1kΩ CL =1nF, RL = 0.18Ω RIN = 10kΩ RSOURCE = 0Ω, RSINK = 0Ω VCC = 12V, VEE = 0V VIN = 0 to 10V RIN = 25Ω CL = 1nF, RL = 0.18Ω RSOURCE = 0Ω, RSINK = 0Ω VCC = 15V, VEE = 0V VIN = 0 to 15V RIN = 1kΩ CL = 1nF, RL = 0.18Ω RSOURCE = 0Ω, RSINK = 0Ω VCC = 15V, VEE = 0V VIN = 0 to 15V RIN = 1kΩ CL = 10nF, RL = 0.18Ω RSOURCE = 0 Ω, RSINK = 0 Ω November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Switching Test Circuit and Timing Diagram VCC 90% VCC VIN 50Ω RIN SOURCE IN ZXGD3009 V RSOURCE 10% SINK td(rise) RSINK 50Ω VIN VOUT td(fall) CL 90% VEE RL 90% VOUT 10% 10% tr tf Typical Application Circuit ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 4 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Typical Switching Characteristics (@TA = +25°C, unless otherwise specified.) ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 5 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Typical Switching Characteristics (@TA = +25°C, unless otherwise specified.) 10 T A = 25°C Peak Sink Current (A) Peak Source Current (A) 10 VCC= 15V 1 CL=10nF VIN = 15V RL = 0.18 0.1 CL=1nF 0.01 100 CL=0.1nF 1k 10k T A = 25°C VCC= 15 1 VIN = 15V CL=10nF RL = 0.18 0.1 CL=1nF CL=0.1nF 0.01 100 RIN Input Resistance () 1k 10k RIN Input Resistance () Source Current vs. Input Resistance Sink Current vs. Input Resistance 1000 1000 RIN=10k RIN=10k 100 td(fall) (ns) td(rise) (ns) 100 TA = 25°C 10 10 TA = 25°C VCC= 15V RIN=1k 1 0.1 RIN=100 VIN = 15V RIN=100 RL = 0.18 1 1 0.1 10 CL Load Capacitance (nF) RL = 0.18 1 10 CL Load Capacitance (nF) Turn-On Delay Time Turn-Off Delay Time 1000 1000 RIN=10k RIN=10k RIN=1k tf (ns) 100 tr (ns) 100 VCC= 15V RIN=1k VIN = 15V T A = 25°C RIN=1k T A = 25°C VCC= 15V 10 RIN=100 0.1 10 0.1 Turn-On Rise Time Datasheet Number: DS36913 Rev. 3 - 2 RL = 0.18 1 10 CL Load Capacitance (nF) CL Load Capacitance (nF) ZXGD3009DY VIN = 15V RIN=100 RL = 0.18 1 VCC= 15V 10 VIN = 15V Turn-Off Fall Time 6 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A SOT363 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 0° 8° All Dimensions in mm B C H K M J D L F Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. C2 Z C2 C1 G Y Dimensions Value (in mm) Z 2.5 G 1.3 X 0.42 Y 0.6 C1 1.9 C2 0.65 X ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 7 of 8 www.diodes.com November 2014 © Diodes Incorporated A Product Line of Diodes Incorporated ZXGD3009DY IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com ZXGD3009DY Datasheet Number: DS36913 Rev. 3 - 2 8 of 8 www.diodes.com November 2014 © Diodes Incorporated