SBR30A60CTBQ

SBR30A60CTBQ
Product Summary
Features and Benefits

VRRM (V)
IO (A)
60
30
VF MAX(V)
@+25°C
0.63

IR MAX (mA)
@+25°C
0.33
NEW
This Super Barrier Rectifier (SBR) diode has been designed to meet the
stringent requirements of Automotive Applications. It is ideally suited to
use as :


Re-circulating Diode
Switching Diode
Patented SBR technology provides a superior avalanche
reliable end applications.
Reduced ultra-low forward voltage drop (VF); better efficiency and
cooler operation.
Description and Applications
Polarity Protection Diode
100% Avalanche Tested
capability than schottky diodes ensuring more rugged and


30A SBR®
SUPER BARRIER RECTIFIER
Green

Reduced high temperature reverse leakage; increased reliability


against thermal runaway failure in high temperature operation
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)

Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data






2
Case: TO263 (D PAK)
Case Material: Molded Plastic, “Green” Molding compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Below
Weight: 1.6 grams (approximate)
TO263
Top View
Package Pin-Out
Configuration
Ordering Information (Note 4)
Part Number
SBR30A60CTBQ-13
Notes:
Compliance
Automotive
Case
TO263
Packaging
800/Tape & Reel
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Marking Information
SBR
30A60CTB
YYWW AB
SBR30A60CTB = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 13 = 2013)
WW = Week (01 - 53)
SBR is a registered trademark of Diodes Incorporated.
SBR30A60CTBQ
Document number: DS36092 Rev. 3 - 2
1 of 5
www.diodes.com
June 2013
© Diodes Incorporated
SBR30A60CTBQ
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Repetitive Peak Avalanche Power (1μs, +25°C)
Non-Repetitive Avalanche Energy
(TJ = +25°C, IAS = 12A, L = 10mH)
Symbol
VRRM
VRWM
VRM
IO
Value
Unit
60
V
30
A
IFSM
180
A
PARM
6000
W
EAS
600
mJ
Symbol
RθJC
TJ, TSTG
Value
9
-55 to +150
Unit
°C/W
°C
Thermal Characteristics
Characteristic
Typical Thermal Resistance Junction to Case (Note 5)
Operating and Storage Temperature Range
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Forward Voltage Drop
VF
Min
-
Leakage Current (Note 6)
IR
-
Notes:
Symbol
Typ
0.57
0.55
Max
0.63
-
0.11
40
0.33
-
Unit
V
mA
Test Condition
IF = 15.0A, TJ = +25°C
IF = 15.0A, TJ = +125°C
VR = 60V, TJ = +25°C
VR = 60V, TJ = +125°C
5. Device mounted on Polymide substate, 125mm2 copper pad, double-sided, PC boards.
6. Short duration pulse test used to minimize self-heating effect.
PF(AV), AVERAGE FORWARD POWER DISSIPATION (W)
14
IF, INSTANTANEOUS FORWARD CURRENT (A)
NEW
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
12
10
8
6
4
2
0
0
100
10
1
0.1
0.01
0.001
0.0001
5
10
15
20
25
IF(AV) AVERAGE FORWARD CURRENT (A)
Figure 1 Forward Power Dissipation
0
200
400
600
800
VF, INSTANTANEOUS FORWARD VOLTAGE (mV)
Figure 2 Typical Forward Characteristics
7. Device mounted on Polymide substate, 125mm2 copper pad, double-sided, PC
boards.
SBR is a registered trademark of Diodes Incorporated.
SBR30A60CTBQ
Document number: DS36092 Rev. 3 - 2
2 of 5
www.diodes.com
June 2013
© Diodes Incorporated
125
PARM, AVALANCHE PEAK PULSE POWER
DERATING PERCENTAGE (%)
IR, INSTANTANEOUS REVERSE CURRENT (µA)
100,000
10,000
1,000
100
10
1
100
75
50
25
0
0
10
20
30
40
50
60
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Figure 3 Typical Reverse Characteristics
0
25
50
150 175
75
100
125
TJ, JUNCTION TEMPERATURE (°C)
Figure 4 Pulse Derating Curve, Per Element
1,200
10000
P(PK), PEAK TRANSIENT POIWER (W)
PARM, MAXIMUM AVALANCHE POWER (W)
1000
Single Pulse
RJA = 50C/W
RJA(t) = r(t) * RJA
TJ - TA = P * RJA(t)
1,000
800
600
400
200
0
0.00001 0.0001
0.001
0.01
0.1
1
t1, PULSE DURATION TIME (sec)
Figure 6 Single Pulse Maximum Power Dissipation
100
10
100
1000
10000
TP, PULSE DURATION (µS)
Figure 5 Maximum Avalanche Power Curve, Per Element
1
r(t), TRANSIENT THERMAL RESISTANCE
NEW
SBR30A60CTBQ
D = 0.7
D = 0.5
D = 0.3
0.1
D = 0.1
D = 0.9
D = 0.05
D = 0.02
0.01
D = 0.01
RJA(t) = r(t) * RJA
RJA = 50°C/W
Duty Cycle, D = t1/ t2
D = 0.005
Single Pulse
0.001
0.01
0.1
1
10
100
t1, PULSE DURATION TIMES (sec)
Figure 7 Transient Thermal Resistance
1,000
10,000
SBR is a registered trademark of Diodes Incorporated.
SBR30A60CTBQ
Document number: DS36092 Rev. 3 - 2
3 of 5
www.diodes.com
June 2013
© Diodes Incorporated
SBR30A60CTBQ
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A
E
TO263
Dim
Min
Max
A
4.07
4.82
A1
0.00
0.25
b
0.51
0.99
b2
1.15
1.77
c
0.356
0.73
c2
1.143
1.65
D
8.39
9.65
D1
6.55

E
9.66
10.66
E1
6.23

e
2.54 Typ
H
14.61 15.87
L
1.78
2.79
L1
1.67

L2
1.77

a
0°
8°
All Dimensions in mm
c2
NEW
L1
D
7°±1°
H
1 K 2
L2
e
b
See Detail B
b2
E1
L3
c
D1
Gauge Plane
Seating
Plane
L
a
A1
Detail B
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X1
Y
Y2
X
Dimensions
C
X
X1
Y
Y1
Y2
Value (in mm)
5.08
1.10
10.41
3.50
7.01
15.99
Y1
C
SBR is a registered trademark of Diodes Incorporated.
SBR30A60CTBQ
Document number: DS36092 Rev. 3 - 2
4 of 5
www.diodes.com
June 2013
© Diodes Incorporated
SBR30A60CTBQ
IMPORTANT NOTICE
NEW
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
SBR is a registered trademark of Diodes Incorporated.
SBR30A60CTBQ
Document number: DS36092 Rev. 3 - 2
5 of 5
www.diodes.com
June 2013
© Diodes Incorporated