© Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 IP67 compact/remote • 4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and fraction flow. • Fraction flow computation based on a 3rd-order algorithm matching all applications. • USM II platform enables fitting of add-on bus modules without loss of functionality. - All modules can be fitted through true "plug & play" - Module and transmitter are automatically configured through the SENSORPROM. • Installation of the transmitter to the sensor is simple "plug & play" via the sensor pedestal. ■ Overview 3 ■ Application SITRANS F C mass flowmeters are suitable for all applications within the entire process industry, where there is a demand for accurate flow measurement. The meter is capable of measuring both liquid and gas flow. MASS 6000 is based on digital signal processing technology – engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install, commission and maintain. The MASS 6000 transmitter delivers true multiparameter measurements i.e. mass flow, volume flow, density, temperature and fraction. The MASS 6000 IP67 transmitter can be compact mounted on all sensors of type MASS 2100 DI 3 to DI 15, and can be used in remote version for all types of MASS 2100/MC2 and FC300 sensors. ■ Benefits • Dedicated mass flow chip with the latest ASIC technology • Fast batching and flow step response with an update rate of true 30 Hz • Superior noise immunity due to a DFT (Discrete Fourier Transformation) algorithm. • Front end resolution better than 0.35 ns improves zero point stability and enhances dynamic turn-down ratio on flow and density accuracy. • Advanced diagnosis and service menu enhances troubleshooting and meter verification. • Built-in batch controller with compensation and monitoring comprising 2 built-in totalizers • Multi-parameter outputs, individual configurable for mass flow, volume flow, density, temperature or fraction flow such as Brix or Plato • Digital input for batch control, remote zero adjust or forced output mode • All outputs can be forced to preset value for simulation, verification or calibration purposes. • User-configurable operation menu with password protection - 3 lines, 20 characters display in 11 languages - Self-explaining error handling/log in text format - Keypad can be used for controlling batch as start/stop/hold/reset • SENSORPROM technology automatically configures transmitter at start-up providing: - Factory pre-programming with calibration data, pipe size, sensor type, output settings - Any values or settings changed by users are stored automatically - Automatically re-programming any new transmitter without loss of accuracy - Transmitter replacement in less than 5 minutes. - True "plug & play" 3/182 Siemens FI 01 · 2016 The main applications for the MASS 6000 IP67 transmitter can be found in: • Food and beverage industries • Pharmaceutical industries • Automotive industry • Oil and gas industry • Power generation and utility industry • Water and waste water industry ■ Design The transmitter is designed in an IP67/NEMA 6 compact polyamide enclosure which can be compact mounted on the MASS 2100 sensor range DI 3 to DI 15 (1/8" to ½") and remote mounted for the entire sensor series. The MASS 6000 IP67 is available as standard with 1 current, 1 frequency/pulse and 1 relay output and can be fitted with addon modules for bus communication. ■ Function The following functions are available: • Mass flow rate, volume flow rate, density, temperature, fraction flow • 1 current output, 1 frequency/pulse output, 1 relay output, 1 digital input • All outputs can be individually configured with mass, volume, density etc. • 2 built-in totalizers which can count positive, negative or net • Low flow cut-off • Density cut-off or empty pipe cut-off, adjustable • Flow direction adjustable • Error system consisting of error-log, error pending menu • Display of operating time • Uni/bidirectional flow measurement • Limit switches with 1 or 2 limits, programmable for flow, density or temperature • Noise filter setting for optimization of measurement performance under non-ideal application conditions • Full batch controller • Automatic zero adjustment menu, with zero point evaluation feed back • Full service menu for effective and straight forward application and meter troubleshooting © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 IP67 compact/remote ■ Technical specifications Measurement of Mass flow [kg/s (lb/min)], volume flow [l/s (gpm)], fraction [%], °Brix, density [kg/m3, (lb/ft3)], temperature [°C (°F)] Current output Enclosure Material Fibre glass reinforced polyamide Rating IP67/NEMA 6 Mechanical load 18 ... 1000 Hz random, 3.17 g RMS, in all directions, to IEC 68-2-36 Current 0 ... 20 mA or 4 ... 20 mA Load < 800 Supply voltage Time constant 0 ... 99.9 s adjustable 24 V version • Supply Digital output Frequency 0 ... 10 kHz, 50 % duty cycle Time constant 0 ... 99.9 s adjustable Active 24 V DC, 30 mA, 1 K Rload 10 K, short-circuit-protected Power consumption 24 V DC 6W Passive 3 ... 30 V DC, max. 110 mA, 250 Rload 10 K 24 V AC 10 VA 230 V AC 9 VA Relay Type Change-over relay Load 42 V/2 A peak Functions 3 18 ... 30 V DC 20 ... 30 V AC 230 V version • Supply 87 ... 253 V AC, 50 ... 60 Hz Fuse 230 V version T 400 mA, T 250 V (IEC 127) - not replaceable by operator Error level, error number, limit, flow direction 24 V version T 1 A, T 250 V (IEC 127) - not replaceable by operator Digital input 11 ... 30 V DC (Ri = 13.6 k) EMC performance Functionality Start/hold/continue batch, zero point adjust, reset totalizer 1/2, force output, freeze output Emission EN 55011/CISPR-11 (Class A) Immunity EN/IEC 61236-1 (Industry) NAMUR Within the value limits according to "General requirements“ with error criteria A in accordance with NE 21 Galvanic isolation All inputs and outputs are galvanically isolated. Isolation voltage: • 500 V to supply • 50 V between outputs Cut-off Low-flow 0 ... 9.9 % of maximum flow Limit function Mass flow, volume flow, fraction, density, sensor temperature Totalizer Two eight-digit counters for forward, net or reverse flow Display • Background illumination with alphanumerical text, 3 20 characters to indicate flow rate, totalized values, settings and faults. Time constant as current output 1 • Reverse flow indicated by negative sign Zero point adjustment Via keypad or remote via digital input Environment Environmental conditions acc. to IEC/EN/UL 61010-1: • Altitude up to 2000 m • POLLUTION DEGREE 2 Maintenance The flowmeter has a built-in error log/pending menu which should be inspected on a regular basis. Cable glands Two types of cable gland are available in polyamide in the following dimensions: M20 or ½“ NPT Ambient temperature Operation -20 ... +50 °C (-4 ... +122 °F), max. rel. humidity 80 % at 31 °C (87.8 °F) decreasing to 50 % at 40 °C (104 °F) according to IEC/EN/UL 61010-1 Storage -40 ... +70 °C (-40 ... +158 °F) (Humidity max. 95 %) Communication Add-on modules: HART, PROFIBUS PA and DP, Modbus RTU RS 485, DeviceNet, FOUNDATION Fieldbus H1 Siemens FI 01 · 2016 3/183 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 IP67 compact/remote Selection and Ordering data Article No. Add-on module SITRANS F C MASS 6000 transmitter Transmitter for wall mounting with wall mounting bracket, fibre glass reinforced polyamide (1 current output, 1 frq./pulse output, 1 relay output and connection board/PCB) 7 ME 4 1 1 0 - Description 7AA7 0 - 77A7 HART1) Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Version Remote IP67/NEMA 6 enclosure 3 2 Supply voltage PROFIBUS PA Profile 31) FDK:085U0236 PROFIBUS DP Profile 3 FDK:085U0237 Modbus RTU RS 485 FDK:085U0234 FOUNDATION Fieldbus H11) A5E02054250 DeviceNet FDK:085U0229 1) 1 2 115/230 V AC, 50 ... 60 Hz 24 V AC/DC Article No. FDK:085U0226 Modules are rated Ex i when used with MASS 6000 Ex d. We can offer shorter delivery times for configurations designated with the Quick Ship Symbol . For details see page 9/5 in the appendix. Display/Keypad 1 with display Operating instructions for SITRANS F add-on modules Serial communication No communication A HART PROFIBUS PA Profile 3 PROFIBUS DP Profile 3 B F G Modbus RTU RS 485 DeviceNet FOUNDATION Fieldbus H1 E H J Cable glands 1 2 M20 ½“ NPT Operating instructions for SITRANS F C MASS 6000 IP67 Description Article No. • English A5E03071936 This device is shipped with a Quick Start guide and a CD containing further SITRANS F C literature. Description Article No. HART • English A5E03089708 PROFIBUS PA/DP • English • German A5E00726137 A5E01026429 Modbus • English • German A5E00753974 A5E03089262 FOUNDATION Fieldbus • English • German A5E02318728 A5E02488856 DeviceNet • English A5E03089720 This device is shipped with a Quick Start guide and a CD containing further SITRANS F C literature. All literature is available to download for free, in a range of languages, at www.siemens.com/processinstrumentation/documentation All literature is available to download for free, in a range of languages, at www.siemens.com/processinstrumentation/documentation Spare parts for compact or remote IP67 version Description Accessories Article No. • M20 A5E00822490 • ½“ NPT A5E00822501 MASS 6000 transmitter IP67/NEMA 6 Fibre glass reinforced polyamide and without connection board 1 current output 1 frq./pulse output 1 relay output Sun lid for MASS 6000 transmitter (Frame and lid) A5E02328485 • 115/230 V AC, 50/60 Hz 7ME41101AA10-1AA0 • 24 V AC/DC 7ME41101AA20-1AA0 Article No. Description Cable glands, screwed entries type in polyamide (100 °C (212 °F)) black, 2 pcs. Wall mounting unit for IP67/NEMA 6 version with wall bracket, without connection board but with 3/184 Siemens FI 01 · 2016 • 4 x M20 cable glands FDK:085U1018 • 4 x ½“ NPT cable glands A5E01164211 Connection board/PCB Supply voltage: 115/230 V/24 V AC/DC FDK:083H4260 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 IP67 compact/remote Description Article No. Terminal box kit with ■ Dimensional drawings Compact • M20 cable glands A5E00832338 • ½“ NPT cable glands A5E00832342 + Change from remote to safe area compact mounting of MASS 6000 IP67/NEMA 6 with MASS 2100. The kit consists of a terminal box in polyamide incl. connection board, cable and connector between PCB and sensor pedestal, PCB, seal and screws (4 pcs.) for mounting on sensor. Not approved for hazardous locations + 3 / Terminal box, in polyamide, inclusive lid • M20 cable glands FDK:085U1050 Dimensions in mm (inch) • ½“ NPT cable glands FDK:085U1052 MASS 2100 Not approved for hazardous locations Sensor size L3 H5 H6 [Di (inch)] [mm (inch)] [mm (inch)] [mm (inch)] Terminal box – lid in polyamide FDK:085U1003 3 (1/8) 6 (¼) 15 (½) Display and keypad • Siemens Front FDK:085U1039 Transmitter wall mounted 75 (2.95) 62 (2.44) 75 (2.95) 82 (3.23) 72 (2.83) 87 (3.43) 306 (12.04) 316 (12.44) 326 (12.83) H5 + H6 [mm (inch)] 388 (15.28) 388 (15.28) 413 (16.26) Ø12 (0.47) Ø8 (0.31) 13 (0.51) 155 (6.10) 240 (9.45) 155 (6.10) 102 (4.02) 71 (2.80) Ø8 (0.31) 30 (1.18) 13 (0.51) 71 (2.80) 50 (2.0) 170 (6.70) Dimensions in mm (inch) Siemens FI 01 · 2016 3/185 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 IP67 compact/remote ■ Schematics Electrical connection Grounding PE must be connected due to safety class 1 power supply. Mechanical counters 3 When mounting a mechanical counter to terminals 57 and 58 (active output), a 1000 µF min. 35 V electrolytic capacitor must be connected to the terminals 56 and 58. Capacitor + is connected to terminal 56 and capacitor - to terminal 58. Output cables If long cables are used in a noisy environment, it is recommended to use shielded cables. Transmitter N 1) N 1 18 - 30 V DC 20 - 30 V DC 150 - 230 V AC L PE Current output 2 L PE PE 2) 31 0/4 - 20 mA Load ≤ 800 Ω 32 Relay 44 45 Relay Relay shown in de-energised condition 46 Passive output max. 30 V/110 mA 42 V AC / 2 A 42 V AC / 2 A $FWLYHRXWSXW PD[P$ 56 56 57 57 58 Digital input PE 24 V 77 &RXQWHUSOF 58 11 - 30 V DC 78 MASS FC300 MASS MC2 MASS 6000 IP67 MASS 2100 Brown 81 Driver 82 1 Red 0 TEMP.SENSE IN 83 84 Yellow 0 89 TEMP.SENSE OUT 90 85 Pick-up 1 86 Pick-up 2 3/186 88 3 4 9 White Black Green Blue 0 87 2 9 Orange 5 6 9 Violet Gray Siemens FI 01 · 2016 7 8 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting ■ Overview MASS 6000 is based on digital signal processing technology – engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install, commission and maintain. The MASS 6000 transmitter delivers true multi parameter measurements i.e.: Mass flow, volume flow, density, temperature and fraction. The MASS 6000 19" transmitter can be connected to all sensors of types MASS 2100/MC2/FC300/FCS200 and are available in different versions depending of number of output facilities, Ex protection and grade of enclosure. ■ Benefits • Dedicated mass flow chip with the latest ASIC technology • Fast batching and flow step response with an update rate of true 30 Hz • Superior noise immunity due to a DFT (Discrete Fourier Transformation) algorithm. • Front end resolution better than 0.35 ns improves zero point stability and enhances dynamic turn-down ratio on flow and density accuracy. • Advanced diagnosis and service menu enhances troubleshooting and meter verification. • Built-in batch controller with compensation and monitoring comprising 2 built-in totalizers • Multi-parameter outputs, individual configurable for mass flow, volume flow, density, temperature or fraction flow such as Brix or Plato • Many output capacities, up to 3 current, 2 frequency/pulse and 2 relay outputs (excludes the possibility of an add-on module) • Digital input for batch-control, remote zero adjust or forced output mode • All outputs can be forced to preset value for simulation, verification or calibration purposes. • User-configurable operation menu with password protection - 3 lines, 20 characters display in 11 languages - Self-explaining error handling/log in text format - Keypad can be used for controlling batch as start/stop/hold/reset • SENSORPROM technology automatically configures transmitter at start-up providing: - Factory pre-programming with calibration data, pipe size, sensor type, output settings - Any values or settings changed by users are stored automatically - Automatically re-programming any new transmitter without loss of accuracy - Transmitter replacement in less than 5 minutes. True "plug & play" • 4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and fraction flow • Fraction flow computation based on a 3rd-order algorithm matching all applications • USM II platform enables fitting of add-on bus modules without loss of functionality. - All modules can be fitted as true "plug & play" - Module and transmitter automatically configured through the SENSORPROM. • Transmitter available with Ex approvals • All electrical connections are easily accessible on the large back plane PCB ■ Application SITRANS F C Coriolis mass flowmeters are suitable for all applications within the entire process industry, where there is a demand for accurate flow measurement. The meter can measure both liquids and gases. The main applications for the MASS 6000 19” transmitter can be found in: • Chemical and pharmaceutical industries • Food and beverage industries • Automotive industry • Oil and gas industry • Power generation and utility industry • Water and waste water industry ■ Design The transmitter is designed as a 19" insert as base to be used in: • 19" rack system • Panel mounting IP65 • Back of panel mounting IP20 • Wall mounting IP66 The MASS 6000 19" is available as standard or as Ex-approved transmitter which is to be mounted in the safe area. Siemens FI 01 · 2016 3/187 3 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting ■ Function 3 The following functions are available: • Mass flow rate, volume flow rate, density, temperature, fraction flow • 2 output versions available as standard: - 1 current output, 1 frequency/pulse output, 1 relay output, 1 digital input - 3 current outputs, 2 frequency/pulse outputs, 2 relay outputs, 1 digital input • All outputs can be individually configured with mass, volume, density etc. • 2 built-in totalizers which can count positive, negative or net • Low flow cut-off • Density cut-off or empty pipe cut-off, adjustable • Flow direction • Error system consisting of error-log, error pending menu • Operating time • Uni/bidirectional flow measurement • Limit switches with 1 or 2 limits, programmable for flow, density or temperature • Noise filter setting for optimization of measurement performance under non-ideal application conditions • Full batch controller • Automatic zero adjustment menu, with zero point evaluation feed-back • Full service menu for effective and straight forward application and meter troubleshooting ■ Technical specifications Measurement of Mass flow [kg/s (lb/min)], volume flow [l/s (gpm)], fraction [%], °Brix, density [kg/m3 (lb/ft3)], temperature [°C (°F)] Current output Current 0 ... 20 mA or 4 ... 20 mA Load < 800 Time constant 0 ... 99.9 s adjustable Digital output Frequency 0 ... 10 kHz, 50 % duty cycle Time constant 0 ... 30 s adjustable Active 24 V DC, 30 mA, 1 K Rload 10 K, short-circuit-protected 3 ... 30 V DC, max. 110 mA, 250 Rload 10 K Passive Relay Type Change-over relay Load 42 V/2 A peak Functions Error level, error number, limit, direction Digital input 11 ... 30 V DC Functionality Start/hold/continue batch, zero point adjust, reset totalizer 1/2, force output, freeze output Galvanic isolation All inputs and outputs are galvanically isolated. Isolation voltage: • 500 V to supply • 50 V between outputs Cut-off Low-flow 3/188 0 ... 9.9 % of maximum flow Siemens FI 01 · 2016 Limit function Mass flow, volume flow, fraction, density, sensor temperature Totalizer Two eight-digit counters for forward, net or reverse flow Display • Background illumination with alphanumerical text, 3 20 characters to indicate flow rate, totalized values, settings and faults • Reverse flow indicated by negative sign Zero point adjustment Via keypad or remote via digital input Ambient temperature Operation -20 ... +50 °C (-4 ... +122 °F) Storage -40 ... +70 °C (-40 ... +158 °F) (Humidity max. 95 %) Communication Add-on modules: HART, PROFIBUS PA and DP, Modbus RTU RS 485, DeviceNet, FOUNDATION Fieldbus H1 Enclosure 19” Material Aluminum/steel (DIN 41494) Rating IP20 Mechanical load 18 ... 1000 Hz random, 3.17 g RMS, in all directions, to IEC 68-2-36 Supply voltage 24 V version • Supply 24 V DC/AC, 50 ... 60 Hz • Fluctuation 18 ... 30 V DC 20 ... 30 V AC • Power consumption 6W IN = 250 mA, IST = 2 A (30 ms) 230 V version • Supply 87 ... 253 V AC, 50 ... 60 Hz • Power consumption 9 VA Fuse 230 V version T 400 mA, T 250 V (IEC 127) - not replaceable by operator 24 V version T 1 A, T 250 V (IEC 127) - not replaceable by operator EMC performance Emission EN 55011/CISPR-11 (Class A) Immunity EN/IEC 61236-1 (Industry) Ex approval ATEX, EAC Ex: [Ex ia] IIC Maintenance The flowmeter has a built-in error log/pending menu which should be inspected on a regular basis. Cable • Max. 300 m • C: max. 300 [pF/m]; LC/RC: max. 100 [H/] • The total cable capacity must be max. 200 nF. Cable glands The cable gland is available in polyamide, in dimension: PG 13.5 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting Selection and Ordering data Article No. Accessories SITRANS F C MASS 6000 transmitter Transmitter for rack and wall mounting, incl. connection board 7 ME 4 1 1 0 - Enclosure (without PCB, connection board) 2 7777 - 77A 0 Enclosure 19 inch insert IP20 (rack mount, purchase rack separately) 19 inch insert in IP65 (wall mount, enclosure included) Description Article No. IP66/NEMA 4X, wall mounting enclosure for 19“ inserts (without back plates). Use with PCB A5E02559813 or A5E02559814 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. C • 21 TE E FDK:083F5037 3 Output configuration A C 1 current, 1 frequency, 1 relay 3 current, 2 frequency, 2 relay • 42 TE Supply voltage FDK:083F5038 1 2 115/230 V AC, 50/60 Hz 24 V AC/DC Ex Approvals Standard (No Ex-approval) With Ex approval 0 1 Enclosure Display/Keypad 1 With display Serial communication (Only possible to connect to MASS 6000 version with 1 current output) No communication A HART PROFIBUS PA Profile 3 PROFIBUS DP Profile 3 B F G Modbus RTU RS 485 DeviceNet FOUNDATION Fieldbus H1 E H J Attention (Ex applications)! MC2 Ex version sensors must only be connected to MASS 6000 standard. The MASS 6000 connection board must be replaced by a connection board approved FDK:083H4294 or FDK:083H4295 (see connection boards/PCB for MASS 6000 and MC2 sensors). Operating instructions for SITRANS F C MASS 6000 19“ Description Article No. • English A5E02944875 Description Article No. Panel mounting enclosure for 19“ insert (21 TE); IP65/NEMA 2 enclosure in ABS plastic for front panel mounting FDK:083F5030 Panel mounting enclosure for 19“ insert (42 TE); IP65/NEMA 2 enclosure in ABS plastic for front panel mounting FDK:083F5031 Back of panel mounting enclosure for 19“ insert (21 TE); IP20/NEMA 1 enclosure in aluminum FDK:083F5032 Back of panel mounting enclosure for 19“ insert (42 TE); IP20/NEMA 1 enclosure in aluminum FDK:083F5033 Front cover (7TE) for panel mounting enclosure FDK:083F4525 This device is shipped with a Quick Start guide and a CD containing further SITRANS F iterature. All literature is available to download for free, in a range of languages, at www.siemens.com/processinstrumentation/documentation Cable glands Description Article No. Cable gland, screwed entry, type M20, in polyamide (100 °C (212 °F)) black, 2 pcs. A5E00822490 Siemens FI 01 · 2016 3/189 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting 3 Add-on module Operating instructions for SITRANS F add-on modules Note: Only possible to connect to MASS 6000 versions with 1 current output. Description Article No. HART • English A5E03089708 PROFIBUS PA/DP • English • German A5E00726137 A5E01026429 Modbus • English • German A5E00753974 A5E03089262 FOUNDATION Fieldbus • English • German A5E02318728 A5E02488856 DeviceNet • English A5E03089720 Description Article No. HART (Ex-i) FDK:085U0226 PROFIBUS PA Profile 3 (Ex-i) FDK:085U0236 PROFIBUS DP Profile 3 FDK:085U0237 Modbus RTU RS 485 FDK:085U0234 FOUNDATION Fieldbus H1 (Ex-i) A5E02054250 DeviceNet FDK:085U0229 This device is shipped with a Quick Start guide and a CD containing further SITRANS F C literature. All literature is available to download for free, in a range of languages, at www.siemens.com/processinstrumentation/documentation Connection boards/PCB for MASS 6000 and MASS 2100 sensors Description Version Article No. Connection board MASS 6000 for 19“ IP20 rack mounting version 24 V 115/230 V FDK:083H4272 Connection board MASS 6000 Ex [ia] IIC for 19“ IP20 rack mounting version 24 V 115/230 V FDK:083H4273 Connection board MASS 6000 for 19“ wall mounting version, for enclosure FDK:083F5037/FDK:083F5038 24 V 115/230 V FDK:083H4274 Connection board MASS 6000 Ex [ia] IIC for 19“ wall mounting version, for enclosure FDK:083F5037/FDK:083F5038 24 V 115/230 V FDK:083H4275 Description Version Article No. Connection board MASS 6000 for 19“ IP20 rack mounting version 24 V 115/230 V FDK:083H4272 Connection board MASS 6000 for Ex application1) and 19“ IP20 rack mounting version (connection board MASS 6000 to MC2 sensors Ex-approved) 24 V 115/230 V FDK:083H4294 Connection board MASS 6000 for 19“ wall mounting version, for enclosure FDK:083F5037/FDK:083F5038 24 V 115/230 V FDK:083H4274 Connection board MASS 6000 for Ex application1) and 19“ wall mounting version 24 V (connection board MASS 6000 to MC2 sensors Ex-approved), 115/230 V for enclosure FDK:083F5037/FDK:083F5038 FDK:083H4295 Connection boards/PCB for MASS 6000 and MC2 sensors 1) Attention (Ex application): MC2 Ex version sensors must only be connected to connection board FDK:083H4294 or FDK:083H4295. Description Article No. Wall mounting enclosure in ABS plastic IP65 with connection board/PCB for Ex application connected to MC2 Ex sensors FDK:083H4296 3/190 Siemens FI 01 · 2016 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting Spare parts 19” versions Enclosure (without PCB, connection board) Description Article No. IP66/NEMA 4X, wall mounting enclosure for 19“ inserts (without back plates). Use with PCB A5E02559813 or A5E02559814 • 21 TE FDK:083F5037 3 • 42 TE FDK:083F5038 Display unit for 19" versions Order the Display and Keypad accessory from MASS 6000 IP67 compact/remote (FDK:085U1039) and use the display part only for replacement FDK:085U1039 Siemens FI 01 · 2016 3/191 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting ■ Dimensional drawings Transmitter 19” insert 14 (0.6) 193 (7.60) 106 (4.17) 175 (6.89) 91 (3.58) 168 (6.61) 128 (5.04) 122 (4.80) 3 2.8 (0.11) Weight incl. back print 0.8 kg (1.8 lbs) Dimensions in mm (inch) Transmitter 19“ wall mounting 235 (9.25) 22 (0.86) 13 (0.51) 90 (3.54) 90 (3.54) 146 (5.75) 120 (4.72) 13 (0.51) 210 (8.27) 192 (7.56) Dimensions in mm (inch) 3/192 Siemens FI 01 · 2016 Weight excl. transmitter: 2.3 kg (5.0 lbs) © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting Transmitter 19“ front of panel 144 (5.67) 197 (7.75) 3 198 (7.80) 50 (1.97) 140 (5.51) 184 (7.24) Weight excl. transmitter: 1.2 kg (2.7 lbs) 185 (7.28) Dimensions in mm (inch) Siemens FI 01 · 2016 3/193 © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting Transmitter, back of panel IP20/NEMA 1, 21 TE 163 (6.42) 144 (5.67) 3 218 (8.58) 57 (2.24) 132 (5.20) 117 (4.61) Weight: 0.7 kg (1.6 lbs) Dimensions in mm (inch) Transmitter, back of panel IP20/NEMA 1, 42 TE 132 (5.20) 57 (2.24) 269 (10.59) 253 (9.96) 223 (8.87) Weight: 0.9 kg (2.0 lbs) Dimensions in mm (inch) 3/194 Siemens FI 01 · 2016 218 (8.58) © Siemens AG 2016 Flow Measurement SITRANS F C Transmitter MASS 6000 for 19" insert/19" wall mounting ■ Schematics Electrical connection Grounding PE must be connected due to safety class 1 power supply. Mechanical counters When mounting a mechanical counter to terminals 57 and 58 (active output), a 1000 µF min. 35 V electrolytic capacitor must be connected to the terminals 56 and 58. Capacitor + is connected to terminal 56 and capacitor - to terminal 58. 3 Output cables If long cables are used in noisy environment, it is recommended to use shielded cables. Transmitter N N 1) 1 18 - 30 V DC 20 - 30 V DC 150 - 230 V AC L PE Current output Relay 2 L PE PE 2) 44 45 46 Passive output max. 30 V/110 mA 56 Relay Relay shown in de-energised condition Active output max. 30 mA 57 58 Current output 2 56 Counter (plc) 24 V 58 11 - 30 V DC 78 91 0/4 - 20 mA load ≤ 800 Ω 92 Current output 3 95 96 97 Relay 2 0/4 - 20 mA load ≤ 800 Ω 93 94 Passive output 2 max. 30 V/110 mA Extended version 42 V AC / 2 A 42 V AC / 2 A 57 77 Digital input PE 0/4 - 20 mA load ≤ 800 Ω 31 32 $FWLYHRXWSXW PD[P$ &RXQWHUSOF 95 24 V 96 97 98 99 100 Relay shown in de-energised condition (relay 2 only available in 19” version) Relay 42 V AC / 2 A 42 V AC / 2 A MASS FC300 MASS MC2 MASS 6000 19” Driver TEMP.SENSE IN TEMP.SENSE OUT Pick-up 1 Pick-up 2 81 82 0 83 84 0 89 90 85 86 0 87 88 Brown Red Orange Yellow MASS 2100 1 2 9 3 4 9 White Black Green Blue Violet Gray 5 6 9 7 8 Siemens FI 01 · 2016 3/195