P R O D U C T B R I E F The BTS 6133D is a single channel high-side power switch (10 mΩ) in TO252-5 (DPAK 5 pin) package. It is fully protected by embedded protection functions including ReverSafe and InverSafe. ReverSafe is a protection feature that causes the power transistor to switch on in case of reverse battery mode. As a result the power dissipation is reduced to almost forward condition. InverSafe functionality increases the device robustness during inverse current flow. There is an IntelliSense pin combining a sophisticated diagnostic feedback signal and current sense function in one pin. An optimized current limitation characteristic adjusts the maximum current according to the supply voltage. This behavior is ideal to handle the inrush current of lamps. The power transistor is built by a N-channel vertical power MOSFET with charge pump and current controlled input pin. The device is integrated in Smart SIPMOS chip on chip technology. Basic Functions ■ Very low standby current ■ Optimized electromagnetic compatibility (EMC) ■ Fast demagnetization of inductive loads ■ Wide operating voltage range ■ ReverSafe, channel opens in case of reverse polarity ■ InverSafe, normal operation even if high inverse currents occur in the application BTS 6133D Protective Functions Short circuit protection (latching shutdown) ■ Current limitation ■ Overload protection ■ Thermal shutdown with restart ■ Overvoltage protection (including load dump) ■ Loss of ground protection ■ Loss of Vbb protection (with external diode for charged inductive loads) ■ Electrostatic discharge protection (ESD) ■ Diagnostic Functions Proportional load current sense signal ■ IntelliSense: Current sense signal or fault signal ■ Feedback of over load detection ■ Feedback of short circuit shutdown ■ Feedback of thermal shutdown ■ Applications ■ High-side power switch with diagnostic feedback for 12 V and 24 V grounded loads ■ All types of resistive, inductive and capacitive loads ■ Replaces electromechanical relays, fuses and discrete circuits Smart High-Side Power Switch One Channel 10 mΩ N e v e r s t o p t h i n k i n g . P R O D U C T B R I E F Block Diagram Rbb Over Voltage Protection Internal Power Supply Gate Control & Charge Pump Load Current Sense Logic Clamp for Inductive Load ReverSafe Load Current Limitation SC Detection IS IN Vbb ESD Protection OUT Temperature Sensor Top Chip Base Chip Product Summary Type Sales Code Package BTS 6133D Q67060-S6072 P-TO252-5 (DPAK 5 pin) Parameter Symbol Values Operating Voltage Vbb(ON) RON(max) IL(nom) IL(ISO) IL12(SCr) 5.5 ... 38 V On-state Resistance Nominal Load Current ISO Load Current Current Limitation 10 mΩ 8A 33 A 75 A Application Example Vbb HIDL Xenon Lamp BTS 6133D OUT IS HIDL IN µC How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München © Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Template: pb_tmplt.fm/2/2003-05-01 Published by Infineon Technologies AG Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B152-H8241-X-X-7600 Printed in Germany PS 06031.5 NB