74LVC1G125

74LVC1G125
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Description
Pin Assignments
The 74LVC1G125 is a single, non-inverting buffer/bus driver with a
3-state output. The output enters a high-impedance state when a
HIGH-level is applied to the output enable (OE) pin. The device is
designed for operation with a power supply range of 1.65V to 5.5V.
The inputs are tolerant to 5.5V, allowing this device to be used in a
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
( Top View )
OE 1
5 Vcc


Inputs Accept Up to 5.5V
ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
Range of Package Options
Direct Interface with TTL Levels
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
4 Y
SOT553
4 Y
SOT25 / SOT353
( Top View )
Wide Supply Voltage Range from 1.65 to 5.5V
± 24mA Output Drive at 3.3V
CMOS Low Power Consumption
IOFF Supports Partial-Power-Down Mode Operation
5 Vcc
GND 3
GND 3
Features




OE 1
A 2
A 2
output preventing damaging current backflow when the device is
powered down.





( Top View )
OE
1
8
Vcc
A
2
5
NC
GND
3
4
Y
(Top View )
OE
A
GND
1
6
2
5
3
4
Vcc
NC
Y
X1-DFN1010-6
(Type B)
(Top View )
X2-DFN1410-6
( Bottom View )
GND 3
A2
OE 1
4Y
5 NC
Vcc
NC
3
4 Y
X2-DFN1010-6
OE
A
GND
6
2
5
(Top View)
5 Vcc
OE 1
3
GND
6 Vcc
X2-DFN1409-6
Chip Scale
Alternative
1
A 2
4 Y
X2-DFN0808-4
Packages not to scale
Applications




Notes:
Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide Array of Products Such as:
 PCs, Networking, Notebooks, Netbooks, PDAs
 Tablet Computers, E-readers
 Computer Peripherals, Hard Drives, CD/DVD ROMs
 TVs, DVDs, DVRs, Set Top Boxes
 Cell Phones, Personal Navigation / GPS
 MP3 Players, Cameras, Video Recorders
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC1G125
Document number: DS32202 Rev. 10 - 2
1 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Ordering Information (Note 4)
74 LVC1G 125 XXX -7
Logic Device
74 : Logic Prefix
LVC : 1.65 to 5.5 V
Logic Family
1G : One Gate
Function
3-State Buffer
OE active low
125:
Part Number
Package
Code
Package
(Notes 5 & 6)
74LVC1G125W5-7
W5
SOT25
74LVC1G125SE-7
SE
SOT353
74LVC1G125Z-7
Z
SOT553
74LVC1G125FS3-7
FS3
X2-DFN0808-4
74LVC1G125FW5-7
FW5
X1-DFN1010-6 (Type B)
74LVC1G125FW4-7
FW4
X2-DFN1010-6
74LVC1G125FX4-7
FX4
X2-DFN1409-6
(Chip scale alternative)
74LVC1G125FZ4-7
FZ4
X2-DFN1410-6
Notes:
Package
Packing
W5 : SOT25
-7 : 7” Tape & Reel
SE : SOT353
Z : SOT553
FS3 : X2-DFN0808-4
FW5 :X1-DFN1010-6 (Type B)
FW4 :X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
7” Tape and Reel
Quantity
Part Number Suffix
Package
Size
3.0mm x 2.8mm x 1.2mm
0.95mm lead pitch
2.0mm x 2.0mm x 1.1mm
0.65mm lead pitch
1.6mm x 1.6 mm x 0.62mm
0.5mm lead pitch
0.8mm x 0.8 mm x 0.35mm
0.5mm pad pitch (diamond)
1.0mm x 1.0mm x 0.5mm
0.35mm pad pitch
1.0mm x 1.0mm x 0.4mm
0.35mm pad pitch
1.4mm x 0.9mm x 0.4mm
0.5mm pad pitch
1.4mm x 1.0mm x 0.4mm
0.5mm pad pitch
3,000/Tape & Reel
-7
3,000/Tape & Reel
-7
4,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
5. Pad layout as shown on Diodes Inc. suggested pad layout which can be found on our website at http://www.diodes.com/package-outlines.html.
6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
Pin Descriptions
Pin Name
OE
Logic Diagram
Description
A
GND
Y
Output Enable
Data Input
Ground
Data Output
VCC
NC
Supply Voltage
No Connection
OE
A
1
2
4
Y
Function Table
Inputs
Output
OE
A
Y
L
L
H
H
L
X
H
L
Z
74LVC1G125
Document number: DS32202 Rev. 10 - 2
2 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Absolute Maximum Ratings (Notes 7 & 8) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
Description
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Rating
Unit
2
1
200
kV
kV
V
Supply Voltage Range
-0.5 to 6.5
V
VI
Input Voltage Range
-0.5 to 6.5
V
VO
Voltage Applied to Output in High Impedance or IOFF State
-0.5 to 6.5
V
VO
Voltage Applied to Output in High or Low State.
-0.5 to VCC +0.5
V
VCC
IIK
Input Clamp Current VI < 0
-50
mA
IOK
Output Clamp Current
-50
mA
IO
Continuous Output Current
±50
mA
Continuous Current Through VCC or GND
±100
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
ICC, IGN
TJ
TSTG
Notes:
7. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
8. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 9) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
VIH
Operating Voltage
High-Level Input Voltage
Parameter
Operating
Data Retention Only
Min
1.65
1.5
VCC = 1.65V to 1.95V
0.65 x VCC
Max
5.5
—
—
1.7
—
2
—
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
0.7 x VCC
—
VCC = 1.65V to 1.95V
—
0.35 x VCC
VCC = 2.3V to 2.7V
—
0.7
VCC = 3V to 3.6V
—
0.8
VCC = 4.5V to 5.5V
VCC = 4.5V to 5.5V
V
VIL
Low-Level Input voltage
—
0.3 x VCC
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
VCC = 1.65V
—
-4
VCC = 2.3V
—
-8
VCC = 2.7V
—
-12
-16
-24
VCC = 4.5V
—
—
—
VCC = 1.65V
—
4
VCC = 2.3V
—
8
VCC = 2.7V
—
12
16
24
VCC = 4.5V
—
—
—
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V
—
20
—
10
—
5
-40
+125
IOH
High-Level Output Current
VCC = 3V
IOL
Low-Level Output Current
VCC = 3V
Δt/ΔV
Input Transition Rise or Fall Rate VCC = 3.3V ± 0.3V
VCC = 5V ± 0.5V
TA
Note:
Unit
V
V
Operating Free-Air Temperature —
V
mA
-32
mA
32
ns/V
°C
9. Unused inputs should be held at VCC or Ground.
74LVC1G125
Document number: DS32202 Rev. 10 - 2
3 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Electrical Characteristics (All typical values are at VCC = 3.3V, TA = +25°C)
Symbol
Parameter
Test Conditions
1.65V to 5.5V
IOH = -100μA
High-Level
Output Voltage
VOH
1.2
—
—
0.95
—
2.3V
1.9
—
—
1.7
—
IOH = -12mA
2.7V
2.2
—
—
1.9
—
2.4
—
—
2.2
—
2.3
—
—
2.0
—
4.5V
3.8
—
—
3.4
—
—
0.1
3V
1.65V to 5.5V
0.1
IOL = 4mA
1.65V
—
—
0.45
—
0.7
IOL = 8mA
2.3V
—
—
0.3
—
0.45
IOL = 12mA
2.7V
—
—
0.4
—
0.6
—
—
0.4
—
0.6
—
—
0.55
—
0.8
4.5V
—
—
0.55
—
.8
0 to 5.5V
—
± 0.1
±5
—
± 100
μA
0V
—
—
±10
—
±200
μA
0.1
10
20
μA
3V
IOL = 24mA
IOL = 32mA
VI = 5.5 V or GND
IOZ
Power Down
Leakage
VI or VO = 5.5V
Current
Z State Leakage
VO =0 to 5.5V
Current
ICC
Supply Current
ΔICC
Additional
Supply Current
VI = 5.5V or GND
IO=0
Input at
VCC –0.6V
Input
Capacitance
Vi = VCC – or GND
Ci
V
—
IOL = 16mA
IOFF
Unit
—
IOL = 100μA
II
-40°C to +125°C
Min
Max
—
VCC – 0.1
1.65V
IOH = -32mA
Input Current
Max
—
IOH = -8mA
IOH = -24mA
Low-Level
Output Voltage
-40°C to +85°C
Typ
—
VCC -0.1
Min
IOH = -4mA
IOH = -16mA
VOL
VCC
3.6V
V
5.5V
—
0.1
10
—
200
μA
3V to 5.5V
—
—
500
—
5,000
μA
3.3V
—
5
—
—
—
pF
Min
Typ
Max
Unit
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
204
371
231
400
435
445
470
460
52
143
105
225
250
250
275
265
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Package Characteristics (All typical values are at VCC = 3.3V, TA = +25°C)
Symbol
Note:
Parameter
θJA
Thermal Resistance
Junction-to-Ambient
θJC
Thermal Resistance
Junction-to-Case
Test Conditions
SOT25
SOT353
SOT553
X2-DFN0808-4
X1-DFN1010-6 (Type B)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
SOT25
SOT353
SOT553
X2-DFN0808-4
X1-DFN1010-6 (Type B)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
VCC
(Note 10)
(Note 10)
°C/W
°C/W
10. Test condition for each of the eight package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC1G125
Document number: DS32202 Rev. 10 - 2
4 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Switching Characteristics
Figure 1 Typical Values at TA = +25°C and nominal voltages 1.8V, 2.5V, 2.7V, 3.3V, and 5.0V.
Parameter
From
Input
To
Output
tpd
A
Y
ten
OE
Y
tdis
OE
Y
VCC
1.8V ± 0.15V
2.5V ± 0.2V
2.7V
3.3V ± 0.3V
5.0V ± 0.5V
1.8 V ± 0.15V
2.5V ± 0.2V
2.7V
3.3V ± 0.3V
5.0V ± 0.5V
1.8V ± 0.15V
2.5V ± 0.2V
2.7V
3.3V ± 0.3V
5.0V ± 0.5V
TA = -40°C to +85°C
Min
1.0
0.5
0.5
0.5
0.5
1.0
0.5
0.5
0.5
0.5
1.0
0.5
0.5
0.5
0.5
Typ
3.3
2.2
2.5
2.1
1.7
4.1
2.8
3.3
2.4
2.1
4.3
2.7
3.0
3.1
2.2
TA = -40°C to +125°C
Max
8.0
5.5
5.5
4.5
4.0
9.4
6.6
6.6
5.3
5.0
9.2
5.0
5.0
5.0
4.2
Min
1.0
0.5
0.5
0.5
0.5
1.0
0.5
0.5
0.5
0.5
1.0
0.5
0.5
0.5
0.5
Max
10.5
7.0
7.5
6.0
5.5
12.0
8.5
8.5
7.0
6.5
12.0
6.5
6.5
6.5
5.5
Unit
ns
ns
ns
Operating Characteristics
TA = +25°C
Test
Conditions
Parameter
Cpd
Power Dissipation
Capacitance
Outputs
Enabled
Outputs
Disabled
74LVC1G125
Document number: DS32202 Rev. 10 - 2
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Typ
Typ
Typ
Typ
19
19
19
21
2
2
3
4
f = 10MHz
Unit
pF
5 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Parameter Measurement Information
VLOAD
Open
GND
RL S1
From Output
Under Test
CL
RL
TEST
S1
tPLH/tPHL
Open
tPLZ/tPZL
VLOAD
tPHZ/tPZH
GND
(see Note A)
Inputs
VCC
V∆
30pF
1kΩ
0.15V
30pF
500Ω
0.15V
50pF
50pF
50pF
500Ω
500Ω
500Ω
0.3V
0.3V
0.3V
VLOAD
CL
≤2ns
VCC/2
2 x VCC
≤2ns
VCC/2
2 x VCC
≤2.5ns
≤2.5ns
≤2.5ns
1.5V
1.5V
6V
6V
VCC/2
2 x VCC
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
2.7V
3.3V±0.3V
5V±0.5V
2.7V
3V
VCC
RL
VM
VI
tW
Input
VM
Vl
Output
Control
Vl
VM
0V
Output
Waveform 1
S1 at VLOAD
(see Note B)
Voltage Waveform Pulse Duration
VM
VM
0V
tPZL
tPLZ
VLOAD/2
VM
VOL + V
VOL
Vl
Input
VM
VM
Output
Waveform 2
S1 at GND
(see Note B)
0V
tPLH
tPHL
VOH
Output
VM
tPHZ
tPZH
VM
VOH - V
VOH
0V
VM
VOL
tPHL
Voltage Waveform Enable and Disable Times
Low and High Level Enabling
tPLH
VOH
Output
VM
VM
VOL
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLZ and tPHZ are the same as tdis.
E. tPZL and tPZH are the same as tEN.
F. tPLH and tPHL are the same as tPD.
74LVC1G125
Document number: DS32202 Rev. 10 - 2
6 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Marking Information
(1)
SOT25, SOT353 and SOT553
(Top Views)
2
4
XXYWX
XXYWX
1
5
7
4
7
5
3
2
1
SOT25/353
SOT553
Part Number
74LVC1G125W5-7
74LVC1G125SE-7
74LVC1G125Z-7
(2)
3
XX : Identification Code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week;
z represents 52 and 53 week
X : A~Z : Internal Code
Package
SOT25
SOT353
SOT553
Identification Code
UY
UY
UY
DFN Packages
(Top View)
XX
YWX
Part Number
74LVC1G125FS3-7
74LVC1G125FW5-7
74LVC1G125FW4-7
74LVC1G125FX4-7
74LVC1G125FZ4-7
74LVC1G125
Document number: DS32202 Rev. 10 - 2
XX : Identification Code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week;
z represents 52 and 53 week
X : A~Z : Internal Code
Package
X2-DFN0808-4
X1-DFN1010-6 (Type B)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
7 of 16
www.diodes.com
Identification Code
WY
VY
UY
MW
UY
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT25
A
SOT25
Dim Min Max Typ
A
0.35 0.50 0.38
B
1.50 1.70 1.60
C
2.70 3.00 2.80
D
0.95
H
2.90 3.10 3.00
J
0.013 0.10 0.05
K
1.00 1.30 1.10
L
0.35 0.55 0.40
M
0.10 0.20 0.15
N
0.70 0.80 0.75
0°
8°

All Dimensions in mm
B C
H
K
M
N
J
L
D
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT25
C2
Z
C2
Dimensions
Z
G
X
Y
C1
C2
C1
G
Y
Value
3.20
1.60
0.55
0.80
2.40
0.95
X
74LVC1G125
Document number: DS32202 Rev. 10 - 2
8 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT353
E
E1
SOT353
Dim Min Max
Typ
A1 0.00 0.10
0.05
A2 0.90 1.00
1.00
b
0.10 0.30
0.25
c
0.10 0.22
0.11
D
1.80 2.20
2.15
E
2.00 2.20
2.10
E1 1.15 1.35
1.30
e
0.650 BSC
F
0.40 0.45 0.425
L
0.25 0.40
0.30
a
0°
8°
-All Dimensions in mm
b
F
D
A2
c
e
A1
L
a
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT353
X1
Dimensions
G
Y1
C
C1
G
X
X1
Y
Y1
C1
Y
X
74LVC1G125
Document number: DS32202 Rev. 10 - 2
Value
(in mm)
0.650
1.900
1.300
0.420
1.720
0.600
2.500
C
9 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT553
D
e1
e
E1/2
E/2
E1
E
L (5x)
c
b (5x)
F
R0.1 MAX.
TYP.
a
7°
A
SOT553
Dim Min Max Typ
A
0.55 0.62 0.60
b
0.15 0.30 0.20
c
0.10 0.18 0.15
D
1.50 1.70 1.60
E
1.55 1.70 1.60
E1 1.10 1.25 1.20
e
0.50 BSC
e1
1.00 BSC
F
0.00 0.10 ––
L
0.10 0.30 0.20
a
6°
8°
7°
All Dimensions in mm
TYP.
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
SOT553
C2
Z
C2
Dimensions
Z
G
X
Y
C1
C2
C1
G
Y
Value
2.2
1.2
0.375
0.5
1.7
0.5
X
74LVC1G125
Document number: DS32202 Rev. 10 - 2
10 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN0808-4
A3
A1
A
Seating Plane
D
Pin #1 ID
e
R0.05 TYP
k
E
L1
D2
E2
Dim
A
A1
A3
b
D
D2
E
E2
e
k
L
L1
z
X2-DFN0808-4
Min
Max
Typ
0.25
0.35
0.30
0
0.04
0.02
0.13
0.17
0.27
0.22
0.75
0.85
0.80
0.15
0.35
0.25
0.75
0.85
0.80
0.15
0.35
0.25
0.48
0.20
0.17
0.27
0.22
0.02
0.12
0.07
0.05
All Dimensions in mm
L
Z
b
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN0808-4
X3
C
Dimensions
C
X
X1
X2
X3
Y
Y1
Y2
Y3
Y2
Y1
X2
X1
Y
Y3
Value
(in
mm)
0.480
0.320
0.300
0.106
0.800
0.320
0.300
0.106
0.900
X
74LVC1G125
Document number: DS32202 Rev. 10 - 2
11 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
X1-DFN1010-6 (Type B)
A1
A
Seating Plane
D
e
L3a
L3(5x)
e1
E
X1-DFN1010-6
(Type B)
Dim Min Max
Typ
A
-
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
(Pin #1 ID)
b
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
X1-DFN1010-6 (Type B)
X1
C
Dimensions
Y(4x)
C
G
G1
X
X1
Y
Y1
Y2
Y3
Y2
Y3
G
G1
Y1
Pin1
74LVC1G125
Document number: DS32202 Rev. 10 - 2
Value
(in mm)
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
X
12 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1010-6
A1
A
X2-DFN1010-6
Dim
Min
Max
Typ
A
––
0.40
0.39
A1
0.00
0.05
0.02
A3
––
––
0.13
b
0.14
0.20
0.17
b1
0.05
0.15
0.10
D
0.95
1.05
1.00
E
0.95
1.05
1.00
e
––
––
0.35
L
0.35
0.45
0.40
K
0.15
––
––
Z
––
––
0.065
All Dimensions in mm
A3
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1010-6
X1
C
Y (6x)
Y1
1
G(4x)
74LVC1G125
Document number: DS32202 Rev. 10 - 2
Dimensions
Value
(in mm)
C
0.350
G
0.150
X
0.200
X1
0.900
Y
0.550
Y1
1.250
X(6x)
13 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1409-6 CHIP SCALE ALTERNATIVE
A1
A3
A
Seating Plane
D
(Pin #1 ID)
e1
Ø(6x)
e2
E
Z1(4x)
X2-DFN1409-6
Dim Min Max
Typ
A
0.40
0.39
A1
0
0.05
0.02
A3
0.13
Ø
0.20 0.30
0.25
D
1.35 1.45
1.40
E
0.85 0.95
0.90
e1
0.50
e2
0.50
Z1
0.075
Z2
0.075
All Dimensions in mm
Z2(4x)
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1409-6 CHIP SCALE ALTERNATIVE
C
Dimensions
D (6x)
C1
C
C1
D
G
G1
X
Y
Y
G1
Pin1
X
74LVC1G125
Document number: DS32202 Rev. 10 - 2
G
14 of 16
www.diodes.com
Value
(in mm)
1.000
0.500
0.300
0.200
0.200
0.400
0.150
April 2016
© Diodes Incorporated
74LVC1G125
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1410-6
A1
A3
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40
0.39
A1
0.00
0.05
0.02
A3
––
––
0.13
b
0.15
0.25
0.20
D
1.35
1.45
1.40
E
0.95
1.05
1.00
e
––
––
0.50
L
0.25
0.35
0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
A
Seating Plane
D
(Pin #1 ID)
e
L(6x)
E
Z1(4x)
Z(4x)
b(6x)
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
X2-DFN1410-6
X1
C
Dimensions
Y
C
G
X
X1
Y
Y1
Y1
1
G
74LVC1G125
Document number: DS32202 Rev. 10 - 2
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X
15 of 16
www.diodes.com
April 2016
© Diodes Incorporated
74LVC1G125
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2016, Diodes Incorporated
www.diodes.com
74LVC1G125
Document number: DS32202 Rev. 10 - 2
16 of 16
www.diodes.com
April 2016
© Diodes Incorporated