74LV04A

74LV04A
HEX INVERTERS
Description
Pin Assignments
The 74LV04A provides provides six independent inverters with
standard push-pull outputs. The device is designed for operation with
a power supply range of 2.0V to 5.5V.
The inputs are tolerant to 5.5V allowing this device to be used in a
NEW PRODUCT
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
The gates perform the Boolean function:
YA
Features

Wide Supply Voltage Range from 2.0V to 5.5V

Sinks or sources 12mA at VCC = 4.5V


CMOS low power consumption
IOFF Supports Partial -Power Down Operation

Inputs or Outputs accept up to 5.5V

Inputs can be driven by 3.3V or 5V allowing for voltage
Applications
Schmitt Trigger Action at All Inputs

ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)

Latch-Up Exceeds 100mA per JESD 78, Class I

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
General Purpose Logic

Power Down Signal Isolation

translation applications.


Wide array of products such as:

PCs, networking, notebooks, ultrabooks, netbooks

Computer peripherals, hard drives, CD/DVD ROM

TV, DVD, DVR, set top box
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
74LV04A
Document number: DS35658 Rev. 1 - 2
1 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
NEW PRODUCT
Pin Descriptions
Pin Number Pin Name
1
1A
2
1Y
3
2A
4
2Y
5
3A
6
3Y
7
GND
8
4Y
9
4A
10
5Y
11
5A
12
6Y
13
6A
14
Vcc
Logic Diagram
Description
Data Input
Data Output
Data Input
Data Output
Data Input
Data Output
Ground
Data Output
Data Input
Data Output
Data Input
Data Output
Data Input
Supply Voltage
Function Table
Input
A
H
L
Output
Y
L
H
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
VCC
VI
IIK
Rating
2
1
200
Unit
kV
kV
V
Supply Voltage Range
-0.5 to +7.0
V
Input Voltage Range (Note 4)
-0.5 to +7.0
V
-20
mA
Input Clamp Current VI< 0V
IOK
Output Clamp Current VO<-0V
-50
mA
IO
Continuous Output Current - 0.5V < VO Vcc + 0.5V
±25
mA
ICC
Continuous Current Through Vcc
50
mA
-50
mA
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
IGND
TJ
Note:
Parameter
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Continuous Current Through GND
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be
within recommend values.
74LV04A
Document number: DS35658 Rev. 1 - 2
2 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
NEW PRODUCT
Parameter
VI
Input Voltage
VO
Output Voltage
IOH
High-Level Output Current
IOL
Low-Level Output Current
Input Transition Rise or Fall
Rate
Δt/ΔV
Min
Max
2.0
5.5
V
0
5.5
V
0
VCC
-50
-2
-6
-12
50
2
6
12
200
100
20
2.0V
2.3V to 2.7V
3.0V to 3.6V
4.5V to 5.5V
2.0V
2.3V to 2.7V
3.0V to 3.6V
4.5V to 5.5V
2.3V to 2.7V
3.0V to 3.6V
4.5V to 5.5V
Operating Free-Air
Temperature
TA
Note:
Conditions
Supply Voltage
VCC
-40
Unit
V
mA
μA
mA
mA
μA
mA
mA
mA
ns/V
125
ºC
5. Unused inputs should be held at VCC or Ground.
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
Test Conditions
Vcc
2.0V
VIH
VIL
VOH
High-Level Input
Voltage
Low-Level Input
Voltage
High-Level
Output Voltage
2.3V to 2.7V
VCC X 0.7
VCC X 0.7
3.0V to 3.6V
VCC X 0.7
VCC X 0.7
4.5V to 5.5V
VCC X 0.7
Unit
V
VCC X 0.7
2.0V
0.5
0.5
2.3V to 2.7V
VCC X 0.3
VCC X 0.3
3.0V to 3.6V
VCC X 0.3
VCC X 0.3
4.5V to 5.5V
VCC X 0.3
VCC X 0.3
IOH = -50μA
VCC-0.1
IOH = -2mA
2.3V
2.0
2.0
IOH = -6mA
3.0V
2.48
2.48
4.5V
3.8
V
VCC-0.1
V
3.8
IOL = 50μA
2.0V to 5.5V
0.1
0.1
IOL = 2mA
2.3V
0.4
0.4
IOL = 6mA
3.0V
0.44
0.44
4.5V
0.55
0.55
0V
5
5
μA
VOL
Low-Level
Output Voltage
IOFF
IOL = 12mA
Power Down
VI or VO = 0 to 5.5V
Leakage Current
ICC
TA = -40°C to +125°C
Min
Max
1.5
2.0V to 5.5V
IOH = -12mA
II
TA = -40°C to +85°C
Min
Max
1.5
V
Input Current
VI =GND or 5.5V
0 to 5.5V
±1
±1
μA
Supply Current
VI = GND or VCC
IO=0
5.5V
20
20
μA
74LV04A
Document number: DS35658 Rev. 1 - 2
3 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
Switching Characteristics
Symbol
Propagation
Delay AN to YN
tPD
NEW PRODUCT
Test
Conditions
Parameter
VCC
2.5V ± 0.2V
3.3V ± 0.3V
5.0V ± 0.5V
2.5V ± 0.2V
3.3V ± 0.3V
Figure 1
CL = 15pF
Figure 1
CL = 50 pF
5.0V ± 0.5V
-40°C to +85 °C
TA = +25°C
-40°C to +125°C
10.6
Min
1
1
1
1
1
Max
14
8.5
6.5
18
12
Min
1
1
1
1
1
Max
14
8.5
6.5
18
12
7.5
1
8.5
1
8.5
Min
—
—
—
—
Typ
7.1
5.1
3.6
10
Max
11.7
7.1
5.5
15.5
—
7.3
—
5.1
Unit
ns
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter Cpd
Power Dissipation
Capacitance per Gate
Test
Conditions
F = 10 MHz
CL = 50pF
VCC
Typ
Unit
3.3V
5.0V
9.6
11.4
pF
Noise Characteristics
VCC = 3V, CL = 50pF TA = +25°C
Symbol
Min
Typ
Max
VOL(p)
Quiet output, maximum dynamic VOL
Parameter
—
0.2
0.8
Unit
V
VOL(V)
Quiet output, minimum dynamic VOL
—
-0.1
-0.8
V
VOH(V)
Quiet output, minimum dynamic VOH
—
3.1
—
V
VIH(D)
High Level dynamic input voltage
2.31
—
—
V
VIL(D)
Low Level dynamic input voltage
—
—
0.99
V
Package Characterisitics
Symbol
Parameter
Ci
Input Capacitance
74LV04A
Document number: DS35658 Rev. 1 - 2
Test Conditions
VCC
Vi = VCC – or GND
2.0 to 5.5V
4 of 9
www.diodes.com
Min
Typ
Max
Unit
3.3
10
pF
October 2013
© Diodes Incorporated
74LV04A
NEW PRODUCT
Parameter Measurement Information
VCC
2.0V to 5.5V
Inputs
VI
VCC
tr/tf
<3ns
VM
CL
VCC/2
15pF or 50pF
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Inverting and Non Inverting Outputs
Notes: A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD
Figure 1 Load Circuit and Voltage Waveforms
74LV04A
Document number: DS35658 Rev. 1 - 2
5 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
NEW PRODUCT
Ordering Information
Device
Package Code
Packaging
(Note 6)
74LV04AS14-13
74LV04AT14-13
S14
T14
SO-14
TSSOP-14
Note:
13” Tape and Reel
Quantity
Part Number Suffix
2500/Tape & Reel
-13
2500/Tape & Reel
-13
6. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO14, TSSOP14
Part Number
74LV04AS14
74LV04AT14
74LV04A
Document number: DS35658 Rev. 1 - 2
6 of 9
www.diodes.com
Package
SO-14
TSSOP-14
October 2013
© Diodes Incorporated
74LV04A
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
Package Type: SO-14
H
Gauge Plane
L

Detail “A”
D
7°
(4
x)
A2
A
e
B
Detail “A”
A1
0.25
Package Type: TSSOP-14
Pin# 1 Indent
B
L
F1
Gauge Plane
Seating Plane
a2
NEW PRODUCT
E
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0
8

All Dimensions in mm
F
Detail ‘A’
G
K
A
a1
D
C
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0
A
4.9
5.10
B
4.30
4.50
C
1.2

D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
Detail ‘A’
74LV04A
Document number: DS35658 Rev. 1 - 2
7 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Package Type: SO-14
NEW PRODUCT
X
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
C1
C2
Y
Package Type: TSSOP-14
X
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
C1
C2
Y
74LV04A
Document number: DS35658 Rev. 1 - 2
8 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV04A
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
74LV04A
Document number: DS35658 Rev. 1 - 2
9 of 9
www.diodes.com
October 2013
© Diodes Incorporated