74LV05A

74LV05A
HEX INVERTERS WITH OPEN DRAIN OUTPUTS
Description
Pin Assignments
The 74LV05A provides provides six independent inverters with open
drain outputs. The device is designed for operation with a power
supply range of 2.0V to 5.5V.
The inputs are tolerant to 5.5V allowing this device to be used in a
Preliminary
NEW
PRODUCT
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
The gates perform the Boolean function:
YA
Features


Wide Supply Voltage Range from 2.0V to 5.5V
Sinks 12mA at VCC = 4.5V


CMOS low power consumption
IOFF Supports Partial -Power Down Operation

Inputs or Outputs accept up to 5.5V

Inputs can be driven by 3.3V or 5V allowing for voltage
Applications
translation applications.

Schmitt Trigger Action at All Inputs

ESD Protection Tested per JESD 22
General Purpose Logic

Power Down Signal Isolation


Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)

Latch-Up Exceeds 100mA per JESD 78, Class I

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)
Notes:

Wide array of products such as:

PCs, networking, notebooks, ultrabooks, netbooks

Computer peripherals, hard drives, CD/DVD ROM

TV, DVD, DVR, set top box
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
Click for Ordering Information
74LV05A
Document number: DS35659 Rev. 1 - 2
1 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Preliminary
NEW
PRODUCT
Pin Descriptions
Pin Number Pin Name
1
1A
2
1Y
3
2A
4
2Y
5
3A
6
3Y
7
GND
8
4Y
9
4A
10
5Y
11
5A
12
6Y
13
6A
14
Vcc
Logic Diagram
Description
Data Input
Data Output
Data Input
Data Output
Data Input
Data Output
Ground
Data Output
Data Input
Data Output
Data Input
Data Output
Data Input
Supply Voltage
Function Table
Input
A
H
L
Output
Y
L
Z
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
VCC
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Supply Voltage Range
VI
Input Voltage Range (Note 4)
IIK
Input Clamp Current
VI < 0V
IOK
Output Clamp Current
IO
Continuous Output Current - 0.5V < VO Vcc +0.5V
ICC
Continuous Current Through Vcc
VO < 0V
Continuous Current Through GND
Rating
Unit
2
kV
1
kV
200
V
-0.5 to +7.0
V
-0.5 to +7.0
V
-20
mA
-50
mA
- 25
mA
50
mA
-50
mA
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
IGND
TJ
Note:
Parameter
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
74LV05A
Document number: DS35659 Rev. 1 - 2
2 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Conditions
Min
Max
Unit
2.0
5.5
V
V
VI
Input Voltage
0
5.5
VO
Output Voltage
0
5.5
V
50
2
6
12
200
100
20
μA
mA
mA
mA
Input Transition Rise or Fall
Rate
Δt/ΔV
Operating Free-Air
Temperature
TA
Note:
2.0V
2.3V to 2.7V
3.0V to 3.6V
4.5V to 5.5V
2.3V to 2.7V
3.0V to 3.6V
4.5V to 5.5V
Low-Level Output Current
IOL
Preliminary
NEW
PRODUCT
Parameter
Supply Voltage
-40
ns/V
+125
°C
5. Unused inputs should be held at Vcc or Ground.
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VIH
VIL
Parameter
Test Conditions
High-Level Input
Voltage
Min
Max
TA = -40°C to +125°C
Min
2.0V
1.5
1.5
2.3V to 2.7V
VCC X 0.7
VCC X 0.7
3.0V to 3.6V
VCC X 0.7
VCC X 0.7
4.5V to 5.5V
VCC X 0.7
Max
Unit
V
VCC X 0.7
0.5
0.5
2.3V to 2.7V
VCC X 0.3
VCC X 0.3
3.0V to 3.6V
VCC X 0.3
VCC X 0.3
4.5V to 5.5V
VCC X 0.3
VCC X 0.3
IOL = 50μA
2.0V to 5.5V
0.1
0.1
IOL = 2mA
2.3V
0.4
0.4
IOL = 6mA
3.0V
0.44
0.44
IOL = 12mA
4.5V
0.55
0.55
0V
5
5
μA
Low-Level Input
Voltage
Low-Level
Output Voltage
IOFF
Power Down
VI or VO = 0 to 5.5V
Leakage Current
ICC
TA = -40°C to +85°C
2.0V
VOL
II
VCC
V
V
Input Current
VI =GND or 5.5V
0 to 5.5V
±1
±1
μA
Supply Current
VI = GND or VCC
IO=0
5.5V
20
20
μA
74LV05A
Document number: DS35659 Rev. 1 - 2
3 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Switching Characteristics
VCC = 2.5V ± 0.2V
Symbol
Parameter
Test Conditions
tPLZ
tPZL
tPLZ
Propagation Delay AN
to YN
Preliminary
NEW
PRODUCT
tPZL
Min
TA = +25°C
Typ
Max
-40°C to +85 °C
Min
Max
-40°C to +125°C
Min
Max
Figure 1
CL = 15pF
—
3.6
10.4
1
13
1
13
—
5.8
12.2
1
15
1
15
Figure 1
CL = 50pF
—
6.1
15.2
1
18
1
18
—
8.1
16.6
1
19.5
1
19.5
Unit
ns
ns
VCC =3.3V ± 0.3V
Symbol
Parameter
Test Conditions
tPLZ
tPZL
tPLZ
Figure 1
CL = 15pF
Propagation Delay AN
to YN
Figure 1
CL = 50pF
tPZL
Min
—
TA = +25°C
Typ
Max
—
-40°C to +85 °C
-40°C to +125°C
Min
Max
Min
Max
2.9
7.1
1
8.5
1
8.5
4
7.1
1
8.5
1
8.5
—
4.7
10.6
1
12
1
12
—
5.8
10.6
1
12
1
12
Unit
ns
ns
VCC =5.0V ± 0.5V
Symbol
Parameter
Test Conditions
tPLZ
tPZL
tPLZ
Propagation Delay AN
to YN
tPZL
Figure 1
CL = 15pF
-40°C to +85 °C
TA = +25°C
Max
Min
Max
-40°C to +125°C
Min
—
Typ
Min
Max
2.2
5.5
1
6.5
1
6.5
—
2.9
5.5
1
6.5
1
6.5
Figure 1
CL = 50pF
—
3.4
7.5
1
8.5
1
8.5
—
4.2
7.5
1
8.5
1
8.5
Test
Conditions
VCC
Typ
Unit
f = 10MHz
CL = 50pF
3.3V
5.0V
2.5
3.0
pF
Unit
ns
ns
Operating Characteristics
TA = +25°C
Parameter
Cpd
Power Dissipation
Capacitance per Gate
Noise Characteristics
VCC = 3V, CL = 50pF TA = +25°C
Symbol
Quiet output, maximum dynamic VOL
Min
—
Typ
0.2
Max
VOL(p)
Parameter
0.8
Unit
V
VOL(V)
Quiet output, minimum dynamic VOL
—
-0.1
-0.8
V
V
VOH(V)
Quiet output, minimum dynamic VOH
—
3.1
—
VIH(D)
High Level dynamic input voltage
2.31
—
—
V
VIL(D)
Low Level dynamic input voltage
—
—
0.99
V
Package Characteristics
Symbol
Parameter
Test Conditions
VCC
Min
Typ
Max
Unit
Ci
Input Capacitance
Vi = VCC – or GND
2.0V to 5.5V
—
3.3
10
pF
74LV05A
Document number: DS35659 Rev. 1 - 2
4 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Preliminary
NEW
PRODUCT
Parameter Measurement Information
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Notes: A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
D. For the open drain device tPLZ and tPZL are the same as tPD
E. tPZL is measured at VM.
D. tPLZ is measured at VOL +V∆ where V∆ = 0.3V
Figure 1 Load Circuit and Voltage Waveforms
74LV05A
Document number: DS35659 Rev. 1 - 2
5 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Preliminary
NEW
PRODUCT
Ordering Information
Quantity
Part Number Suffix
S14
SO-14
2500/Tape & Reel
-13
T14
TSSOP-14
2500/Tape & Reel
-13
Package Code
74LV05AS14-13
74LV05AT14-13
Notes:
13” Tape and Reel
Packaging
(Note 6)
Part Number
6. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO14, TSSOP14
Part Number
74LV05AS14
74LV05AT14
74LV05A
Document number: DS35659 Rev. 1 - 2
6 of 9
www.diodes.com
Package
SO-14
TSSOP-14
October 2013
© Diodes Incorporated
74LV05A
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
Package Type: SO-14
H
Gauge Plane
L

Detail “A”
D
7°
(4
x)
A2
A
e
B
Detail “A”
A1
0.25
Package Type: TSSOP-14
Pin# 1 Indent
B
L
F1
Gauge Plane
Seating Plane
a2
Preliminary
NEW
PRODUCT
E
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0
8

All Dimensions in mm
F
Detail ‘A’
G
K
A
a1
D
C
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0
A
4.9
5.10
B
4.30
4.50
C
1.2

D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
Detail ‘A’
74LV05A
Document number: DS35659 Rev. 1 - 2
7 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Package Type: SO-14
Preliminary
NEW
PRODUCT
X
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
C1
C2
Y
Package Type: TSSOP-14
X
C1
C2
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
Y
74LV05A
Document number: DS35659 Rev. 1 - 2
8 of 9
www.diodes.com
October 2013
© Diodes Incorporated
74LV05A
IMPORTANT NOTICE
Preliminary
NEW
PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify
and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is
the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and
its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
74LV05A
Document number: DS35659 Rev. 1 - 2
9 of 9
www.diodes.com
October 2013
© Diodes Incorporated