ds31801

A Product Line of
Diodes Incorporated
DXT690BP5
45V NPN HIGH GAIN TRANSISTOR IN POWERDI®5
Features
Mechanical Data
•
BVCEO > 45V
•
•
IC = 3A High Continuous Collector Current
•
•
ICM = 6A Peak Collector Current
•
•
High gain device >400 @1A
RCE(sat) = 77mΩ for low equivalent On-Resistance
•
hFE specified up to 6A for a high gain hold up
•
43% smaller than SOT223; 60% smaller than TO252
•
Maximum height just 1.1mm
•
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Case: PowerDI5
Case Material: Molded Plastic, “Green” Molding Compound
UL Flammability Classification Rating 94V-0
•
•
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin annealed over Copper leadframe
Solderable per MIL-STD-202, Method 208
•
Weight: 0.093 grams (approximate)
Applications
•
Qualified to AEC-Q101 Standards for High Reliability
•
LED driver
•
PPAP Capable (Note 4)
•
Motor driver
•
Power Switches
•
DC-DC Converters
•
IGBT & MOSFET Gate Drivers
•
Automotive Circuits
C
POWERDI5
B
E
Bottom View
Top View
Device Schematic
Top View
Pin-Out
Ordering Information (Notes 4 & 5)
Product
DXT690BP5-13
DXT690BP5Q-13
Notes:
Compliance
AEC-Q101
Automotive
Marking
DXT690B
DXT690B
Reel size (inches)
13
13
Tape width (mm)
16
16
Quantity per reel
5,000
5,000
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the
same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Marking Information
DXT690B
YYWWK
DXT690B = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
1 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Symbol
Value
Unit
Collector-Base Voltage
Characteristic
VCBO
60
V
Collector-Emitter Voltage
VCEO
45
V
Emitter-Base Voltage
VEBO
7
V
IC
3
A
ICM
6
A
IB
0.5
A
Value
3.2
1.7
Unit
Continuous Collector Current
Peak Pulse Current
Base Current
Thermal Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Power Dissipation
Thermal Resistance, Junction to Ambient Air
Symbol
(Note 6)
(Note 7)
(Note 8)
(Note 6)
(Note 7)
(Note 8)
PD
RθJA
Thermal Resistance, Junction to Leads
(Note 9)
RθJL
9
Thermal Resistance, Junction to Case
(Note 10)
RθJC
10
TJ, TSTG
-55 to +150
Operating and Storage Temperature Range
W
0.74
39
75
169
°C/W
°C
ESD Ratings (Note 11)
Characteristic
Electrostatic Discharge - Human Body Model
Electrostatic Discharge - Machine Model
Notes:
Symbol
ESD HBM
ESD MM
Value
4,000
400
Unit
V
V
JEDEC Class
3A
C
6. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured
under still air conditions whilst operating in a steady-state.
7. Same as note (6), except mounted on 25mm x 25mm 1oz copper.
8. Same as note (6), except mounted on minimum recommended pad (MRP) layout.
9. Thermal resistance from junction to solder-point (on the exposed collector pad).
10. Thermal resistance from junction to the top of the case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
2 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
Thermal Characteristics and Derating Information
VCE(sat)
Max Power Dissipation (W)
IC Collector Current (A)
10
Limited
1
DC
1s
100m
100ms
10ms
1ms
Single Pulse. T A=25°C
100µs
50mm x 50mm 2oz FR4
10m
100m
1
10
VCE Collector-Emitter Voltage (V)
3.5
3.0
50mm x 50mm
2oz FR4
2.5
25mm x 25mm
1oz FR4
2.0
1.5
MRP
1oz FR4
1.0
0.5
0.0
0
25
40
50mm x 50mm
2oz FR4
30
D=0.5
20
D=0.2
Single Pulse
10
0
100µ
D=0.05
D=0.1
1m
10m 100m
1
Pulse Width (s)
10
100
1k
175
10
1
100µ
1m
10m 100m
1
10
100
1k
Pulse Width (s)
4
TA = 25°C
Power Rating (W)
Thermal Resistance (°C/W)
150
Pulse Power Dissipation
160
140
1 oz. weight Copper
120
100
80
20
10
125
50mm x 50mm
2oz FR4
100
180
40
100
Single Pulse. T A=25°C
Transient Thermal Impedance
60
75
Derating Curve
Max Power Dissipation (W)
Thermal Resistance (°C/W)
Safe Operating Area
50
Temperature (°C)
2 oz. weight Copper
100
1000
10000
Copper Area (sq mm)
3
2 oz. weight Copper
2
1
0
10
Thermal Resistance vs. Cu Area
1 oz. weight Copper
100
1000
Copper Area (sq mm)
10000
Power Rating vs. Cu Area
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
3 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
OFF CHARACTERISTICS
Symbol
Min
Typ
Max
Unit
Test Condition
Collector-Base Breakdown Voltage
BVCBO
60
145
—
V
Collector-Emitter Breakdown Voltage (Note 12)
BVCEO
45
65
—
V
IC = 10mA, IB = 0
Emitter-Base Breakdown Voltage
BVEBO
7
8.2
—
V
IE = 100μA, IC = 0
Collector-Base Cutoff Current
ICBO
—
<1
20
nA
VCB = 35V, IE = 0
Collector-Emitter Cutoff Current
ICES
—
<1
20
nA
VCB = 35V, VBE = 0
Emitter-Base Cutoff Current
IEBO
—
<1
20
nA
VEB = 5.6V, IC = 0
Collector-Emitter Saturation Voltage
VCE(SAT)
—
—
—
—
50
240
210
230
85
360
320
350
mV
IC = 100mA, IB = 0.5mA
IC = 1A, IB = 5mA
IC = 2A, IB = 40mA
IC = 3A, IB = 150mA
Base-Emitter Saturation Voltage
VBE(SAT)
—
1.0
1.2
V
IC = 3A, IB = 150mA
Base-Emitter Turn-On Voltage
VBE(ON)
—
0.9
1.1
V
IC = 3A, VCE = 2V
hFE
500
400
150
60
700
600
350
120
—
—
—
—
—
IC = 100mA, VCE = 2V
IC = 1A, VCE = 2V
IC = 2A, VCE = 2V
IC = 3A, VCE = 2V
Transition Frequency
fT
150
—
—
MHz
Output Capacitance
Cobo
—
16
—
pF
VCB = 10V, f = 1MHz
ton
toff
—
—
33
1300
—
—
ns
ns
VCC = 10V, IC = 500mA,
IB1 = -IB2 = 50mA
IC = 100μA, IE = 0
ON CHARACTERISTICS (Note 12)
DC Current Gain
AC CHARACTERISTICS
Switching Times
Note:
IC = 50mA, VCE = 5V, f = 50MHz
12. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%.
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
4 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
1.0
IC/IB=100
Tamb=25°C
-55°C
0.8
10m
IC/IB=200
VCE(SAT) (V)
VCE(SAT) (V)
100m
IC/IB=100
IC/IB=10
1m
1m
10m
100m
1
IC Collector Current (A)
0.2
100°C
0.8
25°C
0.6
-55°C
0.4
0.2
0.0
1m
10m
100m
1
IC Collector Current (A)
1.0
VBE(SAT) (V)
1.0
1000
900
800
700
600
500
400
300
200
100
0
10
Typical Gain (hFE)
Normalised Gain
1.2
0.8
VBE(ON) (V)
0.8
100m
1
IC/IB=100
-55°C
25°C
0.6
100°C
0.4
hFE v IC
1.0
10m
IC Collector Current (A)
VCE(SAT) v IC
VCE(SAT) v IC
VCE=2V
100°C
0.4
0.0
1m
10
25°C
0.6
1m
10m
100m
1
IC Collector Current (A)
10
VBE(SAT) v IC
VCE=2V
-55°C
25°C
0.6
100°C
0.4
1m
10m
100m
1
IC Collector Current (A)
10
VBE(ON) v IC
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
5 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A
D
D2
A2
b2
L
E
E2
E1
W
L1
e
b1
b1
A2
POWERDI5
Dim
Min
Max
A
1.05
1.15
A2
0.33
0.43
b1
0.80
0.99
b2
1.70
1.88
D
3.90
4.05
D2
3.054 Typ
E
6.40
6.60
e
1.84 Typ
E1
5.30
5.45
E2
3.549 Typ
L
0.75
0.95
L1
0.50
0.65
W
1.10
1.41
All Dimensions in mm
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X
Y
X1
(2x)
G
Dimensions
C
G
X
X1
Y
Y1
Value (in mm)
1.840
0.852
3.360
1.390
4.860
1.400
Y1
(2x)
C
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
6 of 7
www.diodes.com
February 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT690BP5
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
7 of 7
www.diodes.com
February 2014
© Diodes Incorporated