M3628PCF Portable Portable Capacitor Capacitor Former Former Accessories for AC Drives The Bonitron M3628PCF can be used for maintenance of stored capacitors or as a bench top power supply. When variable frequency drives are stored for more than 8 months, the internal chemistry of their capacitor banks may change and need reforming. If these drives are used before the capacitor bank is reformed, the bus capacitors may fail, destroying the drive. Bonitron has a solution to this problem with its M3628PCF Portable Capacitor Former. The Bonitron M3628PCF is ideal for: • Reforming capacitors • Providing a portable, variable voltage DC power supply capable of quickly charging capacitor banks • Holding capacitor voltage for any length of time desired The Bonitron M3628PCF is a portable DC power supply with a manually variable output voltage. Digital displays indicate the setpoint voltage, output voltage, and current. This product may be used for many purposes, including: • Charging • Discharging • Forming capacitors • General DC power needs Features Advantages • Charges, discharges, and forms capacitors • Manually variable output voltage: 0 - 900 VDC • Digital voltage and current displays • Overcurrent and overtemperature protection • Tough impact and weather resistant case • Portability - case on wheels • Easily reforms stored capacitors • Operates from standard 110 VAC supply • Easily customizable output connections • Can serve general DC supply needs Benefits • Reforming caps can prevent catastrophic failure • Quick verification of stored drives • Reforming saves cost of purging old stock capacitors • Decreases maintenance time and cost Phone: 615-244-2825 | WWW.BONITRON.COM | Email: [email protected] Dimensions Length is 18.0” Height is 10.5” (With top closed) Width is 22.0” Ratings Chart Specifications Input Voltage...... 110-120VAC Output Voltage.... 0-900 VDC Output Current.... 1 ADC Maximum Load Capacitance........ 100,000 uF Maximum Charging Time.... 180 seconds Switch................ Charging, Off, or Discharging Displays............. Charging voltage (0-900 ± 3 VDC) and Current (0-2000 ± 3mA) Setpoint voltage (0-900 ±3 VDC) Output voltage (0-900 ±3 VDC) and Current (0-2000 ± 3mA) Size (HxWxD)..... 10.5 x 22.0 x 18.0” Weight.............. 65 lbs. Storage Temp.... -20°C to +65°C Humidity........... Below 90% non-condensing Atmosphere...... Free of corrosive gas and conductive dust - Industry Applications • VFD Capacitor Maintenance • Capacitor Charging • Portable Power Supply • Calibration • Instrumentation 521 Fairground Court | Nashville, TN 37211-2008 | U.S.A. Monday - Friday 8:00 - 5:00pm CST | Phone 615-244-2825 Email - [email protected] | Fax 615-244-2833 | www.bonitron.com 081038-20090511