MJ15011(NPN), MJ15012(PNP) Preferred Devices Complementary Silicon Power Transistors The MJ15011 and MJ15012 are PowerBase power transistors designed for high−power audio, disk head positioners, and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc−to−dc converters or inverters. • High Safe Operating Area (100% Tested) 1.2 A @ 100 V • Completely Characterized for Linear Operation • High DC Current Gain and Low Saturation Voltage • • http://onsemi.com 10 AMPERE COMPLEMENTARY POWER TRANSISTORS 250 VOLTS 200 WATTS hFE = 20 (Min) @ 2 A, 2 V VCE(sat) = 2.5 V (Max) @ IC = 4 A, IB = 0.4 A For Low Distortion Complementary Designs Pb−Free Packages are Available* TO−204AA (TO−3) CASE 1−07 STYLE 1 MAXIMUM RATINGS Rating Symbol Value Unit Collector−Emitter Voltage VCEO 250 Vdc Collector−Emitter Voltage VCEX 250 Vdc Emitter−Base Voltage VEB 5 Vdc Collector Current − Continuous − Peak (Note 1) IC ICM 10 15 Adc IB Adc Base Current − Continuous − Peak (Note 1) IBM 2 5 Emitter Current − Continuous − Peak (Note 1) IE IEM 12 20 Adc Total Power Dissipation @ TC = 25_C Derate above 25_C PD 200 1.14 Watts W/_C TJ, Tstg – 65 to + 200 _C Characteristic Symbol Max Unit Thermal Resistance, Junction to Case RθJC 0.875 _C/W TL 265 _C Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS Maximum Lead Temperature for Soldering Purposes Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 5 ms, Duty Cycle v 10%. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2005 December, 2005 − Rev. 3 1 MARKING DIAGRAM MJ1501xG AYYWW MEX MJ1501x = Device Code x = 1 or 2 G = Pb−Free Package A = Location Code YY = Year WW = Work Week MEX = Country of Orgin ORDERING INFORMATION Device Package Shipping MJ15011 TO−204AA 100 Units/Tray MJ15011G TO−204AA (Pb−Free) 100 Units/Tray MJ15012 TO−204AA 100 Units/Tray MJ15012G TO−204AA (Pb−Free) 100 Units/Tray Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MJ15011/D MJ15011 (NPN), MJ15012 (PNP) ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR)CEO 250 − Vdc Collector Cutoff Current (VCE = 200 Vdc) ICEO − 1 mAdc Collector Cutoff Current (VCE = 250 Vdc, VBE(off) = 15 Vdc) ICEX − 100 μAdc Emitter Cutoff Current (VBE = 5 Vdc) IEBO − 10 μAdc 20 15 120 − − − 0.6 1.0 OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage (Note 2) (IC = 100 mA) ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 2 Adc, VCE = 2 Vdc) (IC = 4 Adc, VCE = 2 Vdc) hFE − Collector−Emitter Saturation Voltage (IC = 2 Adc, IB = 0.2 Adc) (IC = 4 Adc, IB = 0.4 Adc) VCE(sat) Vdc Base−Emitter On Voltage (IC = 4 Adc, VCE = 2 Vdc) VBE(on) − 1.8 Vdc Cob − 750 pF 5 1.4 − − DYNAMIC CHARACTERISTICS Output Capacitance (VCB = 10 Vdc, f = 1 MHz) SECOND BREAKDOWN Second Breakdown Collector Current with Base Forward Biased (VCE = 40 Vdc, t = 0.5 s) (VCE = 100 Vdc, t = 0.5 s) IS/b Adc 2. Pulse Test: Pulse Width = 300 μs, Duty Cycle v 2%. 200 10 hFE , DC CURRENT GAIN 100 IC, COLLECTOR CURRENT (AMP) VCE = 2 Vdc 50 20 MJ15011 MJ15012 10 5 2 dc 1 0.5 5 BONDING WIRE LIMIT THERMAL LIMIT @ TC = 25°C (SINGLE PULSE) SECOND BREAKDOWN LIMIT 0.2 2 0.1 0.2 0.5 1 2 IC, COLLECTOR CURRENT 5 0.1 15 10 Figure 1. DC Current Gain 20 30 50 70 100 150 200 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 2. Active Region Safe Operating Area http://onsemi.com 2 300 MJ15011 (NPN), MJ15012 (PNP) PACKAGE DIMENSIONS TO−204 (TO−3) CASE 1−07 ISSUE Z NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO−204AA OUTLINE SHALL APPLY. A N C −T− E D K 2 PL 0.13 (0.005) U T Q M M Y DIM A B C D E G H K L N Q U V M −Y− L V SEATING PLANE 2 H G B M T Y 1 −Q− 0.13 (0.005) INCHES MIN MAX 1.550 REF −−− 1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC −−− 0.830 0.151 0.165 1.187 BSC 0.131 0.188 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR M http://onsemi.com 3 MILLIMETERS MIN MAX 39.37 REF −−− 26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC −−− 21.08 3.84 4.19 30.15 BSC 3.33 4.77 MJ15011 (NPN), MJ15012 (PNP) ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MJ15011/D