15.0 A Single-Phase Bridge Rectifier

DBA150G
15.0A Single-Phase Bridge Rectifier
Features
 Plastic molded structure
 Glass passivation for high reliability
 Peak reverse voltage: VRM=600V
 Average rectified current: IO=15A
www.onsemi.com
ELECTRICAL CONNECTION
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1)
Parameter
Symbol
Peak Reverse Voltage
Average Rectified Current
Ta = 40°C
Average Rectified Current
Ta = 40°C
with a 270  270  3.0mm3 Cu fin
Surge Forward Current
50Hz sine wave, 1cycle
Junction Temperature
VRM
Storage Temperature
Tstg
Value
Unit
600
V
4.5
A
15.0
A
200
A
150
C
40 to 150
C
IO
IFSM
Tj
VIS
Insulation Voltage
2
kV
Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage
the device. If any of these limits are exceeded, device functionality should not
be assumed, damage may occur and reliability may be affected.
MARKING
1 : Lot No.
ORDERING INFORMATION
See detailed ordering and shipping
information on page 4 of this data sheet
© Semiconductor Components Industries, LLC, 2016
February 2016 - Rev. 0
1
Publication Order Number :
DBA150G/D
DBA150G
ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 2)
Parameter
Symbol
Conditions
Forward Voltage
VF
IF = 7.5A (Note 4)
Reverse Current
IR
VR : At each VRM (Note 4)
Value
min
typ
max
Unit
1.05
V
10
µA
Thermal Resistance
Rth(j-c)
Junction-Case
2.3
C / W
Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
Note 3 : Tightening torque : 0.98N·m max.
Note 4 : Per constituent element of bridge.
www.onsemi.com
2
DBA150G
PACKAGE DIMENSIONS
unit : mm
GBPC 26.5x26.5 / DBA150
CASE 160AA
ISSUE O
1 : Lot No.
2 : G
www.onsemi.com
3
DBA150G
ORDERING INFORMATION
Device
DBA150G
Marking
Package
Shipping
BA150G
GBPC 26.6x26.5 / DBA150
Pb-Free)
100pcs / Tray
500pcs / Box
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
4