Process displays
For standard signals
PA200
Features
–– Voltage input ±10 V, ±20 VDC, ±200 VDC
–– Voltage input ±100 mVDC for measurements by
external current shunt (precision resistor)
–– Current input ±20 mA
–– Display range can be linearised
–– LED display, 4 digits and programmable
–– DIN housing 48 x 24 mm
Technical data - mechanical design
Voltage supply
Ambient temperature
-10...+60 °C
Storage temperature
-20...+70 °C
Relative humidity
95 % non-condensing
Spring-loaded terminal
connector, detachable
21...53 VAC (50/60 Hz) or
10.5...70 VDC
85...265 VAC (50/60 Hz) or
100...300 VDC
Power consumption
1.8 W
Connection
Display
LED, 7-segment display
(with 60 unit stickers for front)
Core cross-section
Number of digits
4-digits
1 mm² (Grid 2.54)
2.5 mm² (Grid 7.62)
Digit height
10 mm
Protection DIN EN 60529
IP 65 (face)
Display range
-1999...9999 ("OuE" to signal
overflow)
Operation / keypad
3 softkeys below bezel
Housing type
Built-in housing
48 x 24 x 106 mm
Display refresh
250 ms
Dimensions W x H x L
Function
Digital display of 1 analog
measured value
Cutout dimensions
45 x 22.2 mm (+0.3)
Mounting depth
95 mm
A/D transformer
Principle ∑Δ
Resolution 16 bit
Measuring rate 20/s
Measuring accuracy
±(0.1 % +3-digit)
Temp. coeffic. 100 ppm/°C
Mounting
Front panel installation by clip
frame
Weight approx.
50 g
Material
Housing: Polycarbonate,
UL 94V-0
Analog input
Current or voltage input
Programmable
parameters
Measuring range
Display range can be linearised
Decimal point
Limits
Without
Data memory
>10 years in EEPROM
Standard
DIN EN 61010‑1
Protection class II
Overvoltage category II
Pollution degree 2
Emitted interference
DIN EN 61000-6-3
Interference immunity
DIN EN 61000-6-2
1
www.baumer.com/motion
14/5/2014
Technical data - electrical ratings
Subject to modification in technic and design. Errors and omissions excepted.
PA200 - Process display
Process displays
For standard signals
PA200
Part number
PA200.00
Inputs and outputs
Analog input
AX01
Voltage supply
4 85...265 VAC and 100...300 VDC
5 21...53 VAC and 10.5...70 VDC
Signal
Resolution
Input resistance
±200 V
±20 V
±10 V
±100 mV
±20 mA
0.1 V
0.01 V
1 mV
0.1 mV
0.01 mA
1 MΩ
1 MΩ
1 MΩ
100 MΩ
20 Ω
Connection diagram
6XSSO\YROWDJH
,QSXWFXUUHQWYROWDJH
,1&RPPRQ
,1P9'&
,1P$'&
,19'&
,19'&
Dimensions
PA200 - without clip frame
2
www.baumer.com/motion
14/5/2014
Subject to modification in technic and design. Errors and omissions excepted.
PA200 - clip frame mounting