Preset counters electronic 1 or 2 presets, impulses 12-260 VAC/VDC Display LCD, 6-digits, programmable NE131 Features –– Preset counter with one or two presets –– Totalizer additional –– Display 6-digits –– Operating mode, scaling factor programmable –– Connection: Voltage pulses 12...260 VAC/VDC –– Parallel display of current value, preset and output circuit status –– Keylock input for keypad –– Programmable as a time counter Technical data - mechanical design Voltage supply Ambient temperature 0...+50 °C Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Connection Plug-in screw terminal connector Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 (face with seal) Operation / keypad Membrane with softkeys Housing type Built-in housing Dimensions W x H x L 48 x 48 x 100 mm Mounting depth 108 mm Mounting Clip frame for built-in housing Cutout dimensions 45 x 45 mm (+0.6) Weight approx. 140 g Materials Housing: Makrolon 6485 (PC) Keypad: Polyester 10...30 VAC (50/60 Hz) 85...265 VAC (50/60 Hz) 10...30 VDC Power consumption 1.5 VA, 2 W Display LCD, 7-segment display, 2-lines, backlit Number of digits 6-digits Digit height 7 mm (postion value) 4 mm (preset) Function Preset counter Scaling factor 0.0001...9999.99 Count mode Adding or subtracting Counting frequency 25 Hz (DC trigger: 1 kHz) Presets 1 preset, 2 presets Data memory >10 years in EEPROM Reset Button, electric or automatic Keylock Yes, electric (keylock) Outputs relay Change-over contact, floating Output holding time 0.01...99.99 s Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Programmable parameters Measuring units, sensor logic Decimal point Scaling factor Count mode Approval UL approval / E63076 1 www.baumer.com/motion 14/5/2014 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. NE131 - LCD Preset counter Preset counters electronic 1 or 2 presets, impulses 12-260 VAC/VDC Display LCD, 6-digits, programmable NE131 Part number Block circuit diagram AX01 ± &RXQW 5HVHW ± .H\ORFN 7RWDOL]HU 6FDOLQJIDFWRU &RXQWHUZLWK SUHVHW &RXQWHUZLWK SUHVHWV (QGFRQWDFW 9 a « Preset 1 With one preset 2 With two presets ± 3UHFRQWDFW 9ROWDJH VXSSO\ Voltage supply 2 85...265 VAC 3 10...30 VAC/VDC 2SWRNRSSOHU NE131.0 Accessories Adaptor plates Trigger level Adaptor plate for screw mount, face 60 x 75 mm Z 118.034 Adaptor plate for clip mount, face 53.2 x 53.2 mm Z 118.035 Adaptor plate for clip mount, face 60 x 75 mm Connection diagram 0D[9 a« 9ROWDJH VXSSO\ ± 9a +] .H\ORFN Input level High 12...260 VAC / VDC Relay outputs Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms ± 9 a« +] Subject to modification in technic and design. Errors and omissions excepted. 9 a« 0...2 VAC / VDC P$0 P$0 9ROWDJH VXSSO\ )LQDOFRQWDFW Input circuit WHUPLQDO &RXQW 5HVHW WHUPLQDOWHUPLQDO Optocoupler inputs Input level Low 6XSSOHPHQWIRUSUHVHWV 3UHFRQWDFW Dimensions 2 www.baumer.com/motion 14/5/2014 Z 118.033