Package Description Package Code Lead Finish J‐STD‐609 Category Assembly Location Atmel Corporation ‐ Package Material Declaration Datasheet 8‐Lead, 1.80 x 2.20 mm Body, Extra Thin DFN (XDFN) 8ME1 GPC Nickel‐Palladium‐Gold (Ni‐Pd‐Au) RoHS Compliant e4 Green Compliant UTAC Thailand REACH Compliant DTP Yes Yes Yes Package Material Declaration Material Integrated Circuit Sub‐Total Die Attach Sub‐Total Bond Wire Sub‐Total Encapsulation Sub‐Total Terminal Plating Substance Silicon (Si) CAS # 7440‐21‐3 Aluminum Oxide 1344‐28‐1 Diethylene Glycol Monoethyl Ether Acetate 112‐15‐2 Epoxy Resin ‐ 10114 Proprietary Epoxy Resin ‐ 10115 Proprietary Amine Proprietary Gold (Au) 7440‐57‐5 Silica Phenol Resin Epoxy Resin ‐ 1 Epoxy Resin ‐ 2 Carbon Black 60676‐86‐0 Proprietary Proprietary Proprietary 1333‐86‐4 Nickel (Ni) Palladium (Pd) Gold (Au) 7440‐02‐0 7440‐05‐3 7440‐57‐5 Sub‐Total Total Weight (mg) 0.692 0.692 0.007 0.007 0.004 0.002 0.001 0.020 0.020 0.020 2.217 0.115 0.088 0.080 0.005 2.506 0.013 0.001 0.000 0.014 3.252 Homogeneous Material Percentage ppm 100.0 1000000 100.0 1000000 33.5 335000 33.5 335000 19.0 190000 9.5 95000 4.5 45000 100.0 1000000 100.0 1000000 100.0 1000000 88.5 885000 4.6 46000 3.5 35000 3.2 32000 0.2 2000 100.0 1000000 92.7 927000 6.5 65000 0.8 8000 100.0 1000000 Package Percentage ppm 21.27 212720 21.27 212720 0.20 2030 0.20 2030 0.12 1151 0.06 576 0.03 273 0.61 6059 0.62 6165 0.62 6165 68.20 681979 3.54 35447 2.70 26971 2.47 24659 0.15 1541 77.06 770598 0.41 4133 0.03 290 0.00 36 0.45 4459 100.00 1000000 Package Material Declaration Certificate Atmel Corporation certifies that the material content information provided above is representative and accurate as of the date of this declaration. Atmel Corporation products designated as "RoHS Compliant" or "Green" (defined below) do not exceed the threshold limits of the European Union Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Name / Title: William B. Dupey III / Quality Engineer & Chemist Date: February 29, 2016 RoHS Compliant: Atmel Corporation defines "RoHS Compliant" to mean maximum concentration value of 0.1% (1000 ppm) for Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Polybrominated Biphenyl (PBB), Polybrominated Diphenyl Ether (PBDE) , Bis(2‐ethylhexyl) Phthalate (DEHP), Butyl Benzyl Phthalate (BBP), Dibutyl Phthalate (DBP), Diisobutyl Phthalate (DIBP) and maximum concentration value of 0.01% (100 ppm) for Cadmium (Cd) in any homogeneous material. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.