High-end RDS/EON car radio system CCR612 user manual

APPLICATION NOTE
User Manual of High-End
RDS/EON Car Radio System
CCR612 (V0.3)
AN96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Abstract
The CCR612 is a computer controlled car radio system based on a P83CE528 micro controller. It controls a
high-end AM/FM car radio with RD(B)S, EON and various I2C controlled peripherals. It can be interfaced to a
SCC600 CD-changer
The system contains functions such as PLL tuning, IF control, stereo decoding, RDS/RBDS+EON decoding, IAC,
sound switching, sound fader control, LCD display, cassette interface, external audio input jack and a detachable
front. An interface to control a CD-changer is also provided.
Radio control and RDS/RBDS+EON processing are combined in a single microcontroller.
"The purchase of Philips’ complete set of Integrated Circuits as specified in this User Manual for manufacture of
a radio system conforming the relevant specification as herein given, secures immunity from suit on
unauthorized use of those Philips’ patent rights, which specifically relate to automatic broadcast station storage
(AST) and/or radio data system (RDS) features."
Purchase of Philips I 2C components conveys
a license under the I 2C patent to use the components in the I 2C system, provided the
system conforms to the I 2C specifications
defined by Philips.
© Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial
or intellectual property rights.
2
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
APPLICATION NOTE
User Manual of High-End
RDS/EON Car Radio System
CCR612 (V0.3)
AN96029
Author(s):
A. Demmers
M. Verheijden
Product Concept & Application Laboratory Eindhoven,
The Netherlands
Keywords
Car Radio
RDS
RBDS
EON
CCR612
ICE (TEA6811 / TEA6822)
SOFAC (TEA6320, 6321, 6322 or 6323)
CD-changer
Number of pages: 94
Date: 1996-05-24
3
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Summary
CCR612 is a computer controlled car radio system based on a P83CE528 microcontroller. It controls a high-end
AM/FM car radio with R(B)DS (Radio Broadcasting Data System), EON (Enhanced Other Network) and various
I2C-bus controlled peripherals.
The system contains functions such as PLL tuning, IF control, stereo decoding, RDS/RBDS+EON decoding, IAC,
sound switching, sound fader control, LCD display, cassette interface, external audio input jack and a detachable
front. An interface to control a CD-changer is also provided.
Radio control and RDS/RBDS+EON processing are combined in a single microcontroller.
4
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
CONTENTS
1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.1
Definitions, Acronyms and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.2
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2
HARDWARE CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1
Block diagram CCR612 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.1
Main Board Part 1a (Basic AM/FM stereo Radio Part) . . . . . . . . . . . . . . . . . . .
2.1.2
Main Board Part 1b (Optional Power Amplifier, 2 x TDA8561Q) . . . . . . . . . . .
2.1.3
Main Board Part 1c (Optional Source Sel. & Audio Contr.
HEF4052B/TDA1526) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.4
Main Board Part 2a ( Micro-controller, EEPROM and RDS Demodulator) . . . .
2.1.5
Main Board Part 2b (Detachable Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.6
Main Board Part 3 (Cassette Interface including Dolby B*) . . . . . . . . . . . . . . .
2.1.7
Front Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.7.1
Front Panel Part FP-1a (Key and Display panel) . . . . . . . . . . . . . .
2.1.7.2
Front Panel Part FP-1b (Detachable Front Version). . . . . . . . . . .
2.1.8
Diagram ICE module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.9
Diagram PACS Sub Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.10
PCB LAY-OUTS of CCR612 sample Version D. . . . . . . . . . . . . . . . . . . . . . . . .
2.2
Performance of the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
13
15
15
16
16
16
17
17
17
17
18
18
19
3
SHORT SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4
CCR612S PINNING AND INTERFACING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
Pinning overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Factory options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.1
Diode options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2
Automatically detected options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
4.3
I C bus addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4
The keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.1
Fixed keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.2
Detachable keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.3
Keyboard options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5
Power stabilizer interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6
LCD display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.7
Non Volatile Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
KEY FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6
FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1
Switching on / off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2
Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.1
Band switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.2
Manual/search tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.3
Frequency scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
30
30
38
38
39
39
39
40
40
41
42
44
45
57
57
58
58
58
60
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.2.4
Selecting preset stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.5
Storing stations in preset memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.6
AST search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2.7
The LOCAL/DX key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-Changer, Cassette and external source interface . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.1
The MODE key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.2
CD-changer mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.3
Cassette functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.4
External audio source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.1
The SELECT key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.2
Changing a setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.3
The LOUD key / RESET function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.4
The MUTE key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.5
Phone mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.6
Power amplifier diagnostics control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.7
User programmable options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RDS / RBDS functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.1
AF follow mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.2
PTY functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.3
Traffic announcements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.4
PTY alarm broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60
60
61
61
61
62
62
63
63
63
64
64
64
65
65
65
65
66
66
67
68
68
RDS / RBDS FACILITIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1
Programme Identification code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2
Programme Service name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3
Programme TYpe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4
Traffic Announcements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5
Alternative Frequency following . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6
EON preset update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
69
69
69
70
70
71
6.3
6.4
6.5
7
Application Note
96029
APPENDIX I NVM layout and initialisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
APPENDIX II Segment addresses for 143 segment display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
APPENDIX III LCD Display Character Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
APPENDIX IV CIRCUIT DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
6
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Modification with respect to old documents:
This document replaces the following two documents:
User Manual of Computer Controlled Car Radio System CCR612 V0.2
AN95081
Diagrams and Performance of R(D)BS Car Radio CCR612 with Cassette Deck and CDC Changer
(V1.1)
AN95070
Change history of:
CCR612S
User Manual of High-End RDS/EON Car Radio System
Modifications with respect to the application note " User Manual of High-End RDS/EON Car Radio System
CCR612S (Version 0.2)", report number AN95081.
1.
2.
3.
Added use of more types of Sofac(TEA6320, TEA6321, TEA6322, TEA6323), adapted sound setting
Band selection diode 2 moved to other pin
Sleeptimer changed from 30 minutes to 1 hour
Modifications with respect to the application note " User Manual of High-End RDS/EON Car Radio System
CCR610S (Version 0.1)", report number AN94065.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
TEA6821 replaced by TEA6822.
Frequency counter resolution for FM changed from 5 kHz to 6.25 kHz.
Volume level during traffic announcements made adjustable by the user in the option programming
menu.
PTY search algorithm changed.
Functionality of PTY icon changed.
Manual tuning algorithm changed.
For MW band only tuning on grid is possible.
Manual tuning grid for USA option changed from 50 kHz to 100 kHz.
Search tuning grid for USA option changed from 100 kHz to 200 kHz.
Pin 9 of the microcontroller (SECUR) not used any more (security functionality stays the same).
Input added for "Phone mute".
Checking on not initialized EEPROM and preprogramming them with default values (listed in
appendix II) at radio switch on.
Polarity of pin EXSTAT changed.
Crystal frequency of microcontroller changed from 8.664 MHz to 12 MHz.
PTY code not longer stored in EEPROM.
When RDS regional mode is on, the radio is now also allowed to switch over to stations with the
same PI-code but its regional code set to "Supra regional".
Display message during AST search changed from "AST SCAN" to "STORE".
7
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Change history of: Diagrams and performance of R(B)DS Car Radio CCR612 with
Cassette Deck.
DIFFERENCES WITH PREVIOUS CCR612 (AN95070).
Mainboard part 1:
Two diodes were added to improve reset behaviour
In case a static on/off key is used, C144/C154/C151 must be 10µF i.s.o. 100nF.
Mainboard part 2:
Option diode D8 is removed. Option diode D2 is now connected to pin 21.
Option diode D4 and D6 are removed.
DIFFERENCES WITH PREVIOUS CCR612 (AN94067).
This note, Diagrams and Performance, valid for CCR612 radio sample (version D) controlled by CCR610S
or CCR612S software (the latter, also for CDC-changer control), differs mainly from the previous one
(Version 1.0) by the following modifications and corrections.
Modifications and Improvements.
General:
Component numbering CCR612 radio sample. Unlike previous note, the electricalcomponent numbers
of the PCB boards (Fig. 13b and Fig. 13d) do match with the electrical diagrams (Fig.4, Fig.7 and Fig.9),
which belong to the CCR612 radio sample (Version D).
Main Board part 1a, 1b and 1c (pages 14, 15 and 16).
- A CDC-changer interface circuit has been introduced, using an extra TDA8579T and intended for
CDC-changer SCC600, controlled by CCR612S software.
- Switched battery voltage circuit improved. Which delivers for external use a battery voltage only
when the radio is in the Power On mode for; supplying the illumination of the detachable front and
delivering a switched plus voltage for the line-out, motor antenna and CDC-changer.
- A telephone mute circuit between Connector Block and Micro Controller pins (AUMUTE and
OPTROW) has been introduced. For this feature the former security contact is used. In general this
is not a problem because the trend to use a security contact is decreasing by the use of detachable
fronts.
- For part 1c only, the bleep input is moved from the source selector (HEF4052B) input to the Audio
Pre Amplifier (TDA6320T) input.
Main Board part 2a and 2b (Page 17 and Page 18 ).
8
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
- Telephone mute circuit, between optrow (40) and Aumute (43) introduced.
- The use of one crystal (8.66 MHz) for both micro and RDS demodulator is not possible in this set.
Because for improved RDS behaviour more ’speed’ is needed which requires a crystal of 12 MHz
for the micro and 8.66 MHz or 4.33 MHz for the RDS demodulator.
- For part 2b only, in the lines ON/OFF, DATA and SCL between detachable front and micro ESD
protection circuits are introduced which consists of a few resistors, zener diode 5V6 (BZX79C) and
2 diodes (BAV99).
Key and Display panel SB1b (Page 21).
- Following a now a days trend the power switch, in the ON/OFF radio line,is moved to the detachable
front. That means two extra contacts on both detachable front and radio are needed.
Diagram ICE Module (page 22).
- The diagram of the ICE module (Euro 1, standard) is modified, the "second" IC TEA6821 is replaced
by the successor TEA6822.
- The diagram of the ICE module (Euro 1, standard) is modified, the "second" IC TEA6821 is replaced
by the successor TEA6822.
Improvements of the TEA6822 with respect to the 6821:
At AM.
- Sensitivity higher. Distortion and AM and AF output less fieldstrength dependent
At FM.
- Interference Absorbtion improved by double detection.
- Gain less temperature dependent
- AM to FM switching in less then 0.5 seconds
With respect to software control.
- Level ADC extended from 3 to 4 bits.
- Multipath sensitivity to be set.
- Level temperature coefficient to be chosen (1 bit) for CDSP applications.
- Counter pre-scaler setting added to reduce counter time.
9
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
10
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
1
Application Note
96029
INTRODUCTION
CCR612 is a computer controlled high-end AM/FM car radio system with R(B)DS (Radio Broadcasting
Data System), EON (Enhanced Other Network information) and I2C-bus controlled radio IC’s. CCR612S
is the controlling microprocessor. CD-changer control is also preformed by the CCR612S. It is based on
the 8051 family microcontroller P83CE528 and takes care of all radio control functions as well as R(B)DS
and EON decoding. With the following features:
Digital PLL tuning for FM, MW, LW and SW (49m) bands, (factory options: MW, LW and SW disable).
Factory option for application in different parts of the world (e.g. USA / Europe) concerning the band
limits and tuning grid.
Manual Tuning, Search Tuning and Local/Dx handling.
Frequency Scan (Continuous Search, pausing 6 seconds on every station).
Automatic Store Tuning (AST).
Search for Traffic Programmes (TP) or specific Program Types (PTY).
Presets: 6 in each of the bands: FM1, FM2, FM-AST, MW, MW-AST, LW and SW (49m).
R(B)DS functions:
- PS
Programme Service name.
- PI
Programme Identification code.
- AF
Alternative Frequency List / Automatic Following.
- TP / TA
Traffic Programme / Traffic Announcement.
- PTY
Programme TYpe selection and display. PTY Code table for both RDS and RBDS.
- EON
Enhanced Other Networks information.
Sound control: volume, bass, treble, balance, fader, loudness and mute via I2C-bus or potentiometers.
Non Volatile Memory for last sound control settings, last band, last frequency for each band, Presets,
PS names (RDS), AF lists (RDS), etc.
LCD display (I2C bus controlled) displaying:
- system status (band / frequency / preset number / modes).
- RDS Programme Service name (PS).
- RDS Programme Type (PTY).
- Sound control settings (Bass, Treble, Balance, Fader).
Power stabilizer control with diagnostic functions.
User control up to 27 keys with either a fixed keyboard, a keyboard on a detachable front or a
combination of both.
User programmable options.
Cassette Interface including MTL, Dolby, AMS (Automatic Music Search) and Solenoid control.
Input jack for external audio source.
Input for phone mute detection.
An interface for the SCC600 CD-changer.
11
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
1.1
Application Note
96029
Definitions, Acronyms and Abbreviations
AF
AMS
AST
EON
I2C
ICE
LCD
MTL
NVM
PI
PS
PTY
RDS
RBDS
TA
TP
Alternative Frequencies (R(B)DS-information) / Automatic Follow;
Automatic Music Search;
Automatic Store Tuning;
Enhanced Other Network (R(B)DS-information);
Inter-IC bus;
In Car Entertainment;
Liquid Crystal Display;
Metal (versus Chrome/Ferro) type of tape;
Non Volatile Memory (EEPROM);
Programme Identification (R(B)DS-information);
Programme Service name (R(B)DS-information);
Programme TYpe (R(B)DS-information);
Radio Data System;
Radio Broadcast Data System;
Traffic Announcement (R(B)DS-information);
Traffic Programme (R(B)DS-information).
AF follow
mode
Radio will always be tuned to the Alternative Frequency with the best signal quality.
Traffic
station
A station of which the TP (this station) or TA (linked via EON) bit is set to indicate that
traffic announcements will be transmitted via this station or linked EON stations.
NOTE: RBDS is an extension of the European RDS system. Every reference in this document to RDS is
also valid for the RBDS system unless, otherwise specified.
1.2
[1]
[2]
[3]
References
Outline specification of High-End RDS/EON Car Radio System (CCR612S)
(version 0.2)
PCALE, A. Demmers, M. Verheijden.
Specification of the radio data system RDS for VHF/FM sound broadcasting,
European Standard CENELEC
United States RBDS standard January 8, 1993
Specification of the radio broadcast data system,
AN96043
Ref.No. EN 50067
NRSC
[4]
TEA6811/TEA6822 Car Radio Receiver (V 1.2)
PCALE, W van Dooremolen.
AN95074
[5]
Improved Dynamic Radio Reception with PACS (TEA6850).
PCALE, H de Ruijter.
AN95052
12
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
2 HARDWARE CONFIGURATION
2.1
Block diagram CCR612
Figure 1 shows the block diagram of the high-end computer controlled RDS car radio system CCR612.
As can be seen in the block diagram, the system can either be equipped with a fixed keyboard or with a
detachable keyboard. The detachable keyboard version of the system still allows some keys to be realised
as fixed keyboard keys. Furthermore a choice exists with respect to the following system parts:
- Power amplifier ( 2 speaker / 4 speaker / output power)
- Sound control (Potentiometer control / I2C control)
This hardware description only describes the use of the sofac TEA6320.
2.1.1
Main Board Part 1a (Basic AM/FM stereo Radio Part)
Page 81 shows the circuit diagram of the basic radio part, which consist of the following parts: ICE receiver
module, audio pre-amplifier, power amplifier, power stabiliser, differential line receiver and PACS control
board.
AM/FM - ICE module (TEA6811V,TEA6822T)
The AM/FM - ICE module is a sub-board ( see paragraph 2.1.8)which comprises a two IC package (RF
IC TEA6811V and IF IC TEA6822T) and is designed especially for use in car radio’s. The module contains
the following functions;
AM receiver
FM receiver
- FM stereo decoder
- Interference Absorption Circuit (or Noise Blanker)
- Station detector and weak signal control
PLL tuning Synthesizer
I2C-Bus control
The complete circuit diagram of the ICE Module (version euro 1) is shown on page 89. For a detailed
description of functions and performance see Ref.4.
Audio Pre Amplifier (TEA6320)
I2C-Bus controlled audio pre-amplifier in SO package for car and home receivers, includes Source selector
(for four stereo inputs and one mono input), Loudness characteristic, Volume control, Bass control, Treble
control, Balance and Fader control.
Power Amplifier (TDA8561Q)
Car radio power amplifier with dynamic distortion detector and diagnostics in a 17 lead single in line (SIL)
plastic power package. It contains 4 x 12W (2 ohm) and 4 x 7W (4 ohm) single-ended or 2 x 24W (4 ohm)
bridge amplifiers.
Supply voltage Stabilizer (TDA3602)
Three output voltage regulator, in SIL 9 package, for use in car radios with a microprocessor. It contains
two computer controlled voltage regulators with foldback current protection (Regulators 1 and 2) and one
fixed voltage regulator (3) that also operates during load dump and thermal shutdown. This regulator is
used to supply the microprocessor.
13
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
FM / AM
AM/FM RECEIVER
Stereo decoder
Audio Amplifier
Power supply
CDC_R
ISOLATOR
TD A8579(T)
EX_L
ISOLATOR
TD A8579(T)
EX_R
E X T ER N A L
AUDIO
JACK
CDC_bus
MAIN BOARD PART 1
AM /F M- RF
PLL - SYN TH
TE A6 81 1V
CDC_L
CDC
INPUT
JACK
EX STATE
AM/FM-IF
MPX DEC.+IAC
TEA6822T
CASS(L)
CASS(R)
L
R
AU D I O C ON TR OL
TE A6 32 x T
OR
TD A1 52 6
MONO
LF
POWER
AM P
LR
TDA8562Q
or
TDA8561Q
(2x)
RF
RR
ICE MODULE
MAIN IIC -BU S
IF
MPX
MPX
VO LTAG E
STABILIZER
TDA3602
PACS
TEA6850
SUB-BOARD
DIAG.
In-lock
RDS
DEMODULA TOR
S A A 65 7 9 T
RDSCLK
RDSDAT
BLEEP
MAIN uP ,NVM
RDS DEMODULATOR
MAIN BOARD PART 2
5
CASSETTE
CO NT RO L
INTERFACE
MECR
DOLBY
CASS(L)
EEPR OM
P C F 8 5 94 E
-2(P/T)
MICRO CONTRO LLER
CCR612S
( P83CE528)
8
KEYBOARD SCAN LINES
L C D D R I VE R
PC F85 76
CASS(R)
AMS
HEAD AMPL DOLBY AMS PROC.
TEA0675(T)
or: TEA0677(T)(no dolby)
CASSETTE INTERFACE
MAIN BOARD PARTS
DISPLAY PANEL
FIXED KEYBOARD
FRONT-PANEL FP1A/B
OR
DISPLAY PANEL
DETACHABLE KEYBOARD
FRONT-PANEL FP1C
KEYBOARD SCAN LINES / DETACH. KEYB IIC-BUS
D E T A CH A B L E
KEYBOARD
SCAN NER
P C F8 5 7 4
LCD DRIVER
PC F8 57 6
LC D
DISPLAY
Figure 1 Block diagram CCR612
14
LC D
D I SP L A Y
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Isolator ( Differential Line Receiver, TDA8579T)
Dual common-mode rejection differential line receiver with 0 dB gain and low distortion. This device is
intended to be used to receive line inputs in audio applications that require a high level of common-mode
rejection. The device is encapsulated in an 8-pin SO or DIL package. In this set the isolator is used
between the external input and source selector input. Both the external input plug circuit and the
CD-changer input circuit are equipped with an isolator.
PACS - Sub Board (TEA6850)
PACS controls the I.F. Selectivity / Bandwidth to avoid receiving problems due to near adjacent channels
(especially for Europe, spacing of 100 kHz is not an exception). In order to show the improvements of the
selectivity and dynamic behaviour of the radio by the use of PACS an ON/OFF switch has been used on
the front panel.
A complete circuit diagram of the PACS board is shown on page 94 and for description of the functions,
alignment and performance see Ref.5.
2.1.2
Main Board Part 1b (Optional Power Amplifier, 2 x TDA8561Q)
Page 82 shows the previous circuit diagram (paragraph 2.1.1 Basic AM/FM stereo Radio Part) equipped
with circuits for 4 x 24W (4 ohm) audio output power.
Power Amplifier (2 x TDA8561Q)
Single circuit configuration 2 x 24W (4 ohm) bridge amplifiers, package SIL 17 pins Quil.
2.1.3
Main Board Part 1c
HEF4052B/TDA1526)
(Optional
Source
Sel.
&
Audio
Contr.
Page 83 shows the circuit diagram from paragraph 2.1.1 (Basic AM/FM stereo Radio Part) equipped with
the DC controlled audio pre-amplifier (TDA1526) and a source selector circuit (HEF4052B).This set-up
is used in case potentiometer control for volume and tone is desired.
Audio Pre-Amplifier and DC Control (TDA1526).
An active stereo,tone/volume control for car radios. It includes functions for bass and treble, control,
volume control with built in contour (can be switched off) and balance.All these functions can be controlled
direct by DC voltages or via single linear potentiometers.
Source selector circuit (HEF4052B).
The HEF4052B is a dual 4 channel analogue multiplexer/demultiplexer with common channel select logic.
In this case used for four stereo inputs: radio, cassette and external input.
15
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
2.1.4
Application Note
96029
Main Board Part 2a ( Micro-controller, EEPROM and RDS Demodulator)
Page 84 shows the circuit diagram of the RDS Demodulator, Micro controller (which combines all radio
control functions as well as RDS decoding) and EEPROM.
Microcontroller (P83CE528EFB)
Main microcontroller (CCR612S), a derivative of the 8051 micro-controller family with an 8-bit CPU, 32
Kbytes ROM, 512 bytes RAM and four 8-bits I/O ports in a 44-pins QFP package.
EEPROM (PCF8594E-2P/T)
The PCF8594E is a 512 byte, 5V Electrically Erasable Programmable Read Only Memory (EEPROM) that
can be 100,000 times re-written. I2C-bus controlled.
RDS Demodulator (SAA6579T)
RDS Demodulator IC, which includes the 57 kHz band-pass-filter, to generate the RDS data out of the
MPX signal.
2.1.5
Main Board Part 2b (Detachable Front)
Page 85 shows the previous circuit diagram (paragraph 2.1.4) of the micro controller board extended with
the possibility to use a detachable front panel.
2.1.6
Main Board Part 3 (Cassette Interface including Dolby B*)
Page 86 shows the circuit diagram of the cassette interface circuit for the Philips cassette deck P6-29/3.
The circuit is based on the TEA0675, Dual Dolby* B-type noise reduction circuit for playback applications.
The TEA0675 includes head and equalization amplifiers with electronically switchable time constants.
Furthermore the TEA0675 includes electronically switchable inputs for tape drives with reverse heads.
This device also detects pauses of music in the AMS (Automatic Music Search) scan mode.
16
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
2.1.7
2.1.7.1
Application Note
96029
Front Panels
Front Panel Part FP-1a (Key and Display panel)
Page 87 shows the circuit diagram of the key and display panel.
LCD Driver (PCT8576CT)
The PCF8576 is a peripheral device which interfaces to almost any liquid crystal display (LCD) having low
multiplex rates. It generates the drive signals for any static or multiplex LCD containing up to four back
planes and up to 40/24 segments and can easily be cascaded for larger LCD applications. I2C-bus
controlled.
2.1.7.2
Front Panel Part FP-1b (Detachable Front Version).
Page 88 shows the circuit diagram of the detachable keyboard front. The circuit includes an I/O expander
PCF8574, the keyboard and LCD display unit are placed on the detachable front controlled by a second
I2C bus. Eight contacts are required to connect the detachable front to the radio. Furthermore there is a
fixed key-board with a limited number of keys included. That means it is possible to use a combination of
detachable keys and fixed keys (for circuit example see page 85).
2.1.8
Diagram ICE module.
Standard Version EURO 1
Page 89 shows the complete circuit diagram of the ICE AM/FM tuner module version Euro 1.
The Standard Euro 1 module is intended for European frequency ranges.
FM
87.5
AM (MW) 531
AM (LW) 144
to
to
to
108.0 MHz
1629 kHz
288 kHz
The module contains the IC’s TEA6811V and TEA6822T with the following main functions;
TEA6811 - AM RF
- AM mixer
- FM mixer
- AM/FM oscillator
- Tuning synthesizer
- I2C-Bus
TEA6822
17
- 2nd AM mixer
- 2nd FM mixer
- AM/FM - IF amplifier
- AM and FM demodulator
- x-tal oscillator (61.5 MHz)
- Stereo Decoder and IAC
- Station (stop) detector
- Weak signal processing
- Multi Path Detector
- I2C-Bus
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
EURO 2, USA 1 and JAPAN 1 ICE MODULE VERSIONS.
By slight circuit modifications of the standard module (EURO 1), matched module versions with better
performance for e.g. USA an Japan can be derived. The needed modifications for the different modules
are:
Module Version
Modifications.
Euro 1
Non
Euro 2 (including S.W.)
A short wave transformer i.s.o. L8 and C29
USA 1
L15 short circuited
C2 10pF i.s.o. 5p6
C72 6p8 deleted
R18 1 Mohm i.s.o. 220 Kohm
R54, in parallel with C26 (1uF)
C61 10 nF i.s.o. 6n8
C62 10 nF i.s.o. 6n8
Z1 SFR450H i.s.o. SFP 450H
Z3 SFE 10.7 MS3 G-A 220 kHz i.s.o. SFE10.7 MS3 A 10k-A
Z2 & Z4 SFE 10.7 MS2 G-A 180 kHz i.s.o. SFE10.7 MS3 A 10k-A
R41 (pre-set adjust) replaced by resistor of 68 Kohm.
R44 120 Kohm i.s.o. 82 Kohm.
Japan 1
C7 47 pF i.s.o. 180pF
C9 deleted
D3 BB814 selection i.s.o. BB804
2.1.9
Diagram PACS Sub Board
Page 94 shows the diagram of the PACS Sub-Board using the TEA6850. For circuit description,
performance and PCB lay out see application note Ref.5.
2.1.10
PCB LAY-OUTS of CCR612 sample Version D.
CCR612/Mainboard PCB lay-out TOP side Copper (p. 90, fig. a) / Components (non SMD) (p. 90, fig. b)
CCR612/Mainboard PCB lay-out BOTTOM side Copper(p. 91, fig. c) / SMD Components (p. 91, fig.d)
ICE module board PCB lay-out TOP side Copper(p. 92, fig. a) /Components (non SMD) (p. 92, fig. b)
ICE module board PCB lay-out Bottom side Copper(p. 92, fig. c) / SMD Components (p. 92, fig. d)
Front panel PCB lay-out Top side Copper (p. 93, fig. a) / Components (non SMD) (p. 93, fig. b)
Front panel PCB lay-out Bottom side Copper (p. 93, fig. c) / SMD Components (p. 93, fig. d).
18
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
2.2
Application Note
96029
Performance of the radio
General
Supply voltage range
Quiescent current:
10.2
to
power off
power on
Operating ambient temperature
16
< 2
550
V
mA (typ.)
mA (typ.)
-30
to
80
°C
FM frequency range:
Europe
USA
87.5
87.9
to
to
108.0
107.9
MHz
MHz
AM frequency range:
Europe
144
531
5900
530
5900
to
to
to
to
to
288
1629
6200
1710
6200
kHz (LW)
kHz (MW)
kHz (SW)
kHz (MW)
kHz (SW)
USA
IF-frequency double conversion:
FM-IF1/IF2
AM-IF1/IF2
72.2 MHz / 10.7 MHz
10.7 MHz / 450 kHz
19
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
FM characteristics
Vsupply = 14.4 V, Tamb = 25 °C, fo = 98 MHz, fdev = ±22.5 kHz, fmod = 1 kHz unless otherwise specified. Dummy
aerial as shown in Figure 2.
4.3
12 0
Radio aerial
in put (15 0 Oh m)
50
55
Vin
Signal generator
Figure 2 Dummy aerial to test the FM mode
Aerial input voltage (Vin), for -3 dB limiting (adjustable)
for (S+N)/N = 26 dB
for 10 dB crosstalk (stereo)
3 - 20 µV
2.7 µV
70 µV
Signal-to-noise ratio over most of the signal range
RF signal handling capability for THD < 2% at 75kHz dev.
64
> 2
dB
V
MPX output (RMS value) at pin 47 of the TEA6822
200 mV
AM suppression over most of the signal range
> 55 dB
Total Harmonic Distortion over most of the signal range. 75 kHz dev. 0.5 % (typ.)
Adjacent signal selectivity (two signal method) S200
IF suppression:
IF1 (72.2 MHz)
IF2 (10.7 MHz)
Search sensitivity (adjustable)
Vin
RDS sensitivity:
Traffic Announcement
Vin
Programme Identification
Vin
IF counter resolution
Frequency grid (Europe): Search Tuning
Manual Tuning
Repetitive Manual tuning (after .5s)
Frequency grid (USA):
Search Tuning
Manual Tuning
Repetitive Manual tuning (after .5s)
20
>
>
>
>
>
>
45
70
90
4
12
15
6.25
100
50
100
200
100
200
dB
dB
dB
µV
µV
µV
kHz
kHz
kHz
kHz
kHz
kHz
kHz
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
AM characteristics
Vsupply = 14.4 V, Tamb = 25 °C, fo = 999 kHz, m = 0.3, fmod = 1 kHz unless otherwise specified. Dummy aerial
as shown in Figure 3.
60
15 p F
Radio aerial input
50
Vin
65 p F
50
Signal generator
Figure 3 Dummy aerial to test the AM mode
Aerial input voltage (Vin),
for (S+N)/N = 26 dB MW
LW
SW
55
80
t.b.f.
µV
µV
Signal-to-noise ratio for Vin = 1 mV
> 55
dB
AGC range 5 mV/Vin for 10 dB variation of AF output
> 60
dB
RF signal handling capability for THD < 10 % at m = 0.8
> 3
V
Total Harmonic Distortion over most of the
AGC range, m = 0.8, fmod = 1 kHz
< 2
%
Total bandwidth B 3dB
4.5
kHz
Fidelity ( -3 dB )
10 Hz - 2 kHz
IF suppression IF1 (10.7 MHz)
IF2 (450 KHz)
> 70 dB
> 100 dB
IF selectivity
> 55 dB
> 60 dB
250 Hz
S9
S18
IF counter resolution
21
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Frequency grid
Europe
LW (search and manual tuning)
MW (search and manual tuning)
SW (search and manual tuning)
1
9
1
kHz
kHz
kHz
USA
MW (search and manual tuning)
SW (search and manual tuning)
10
1
kHz
kHz
Search sensitivity (adjustable)
> 20
22
µV
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
3
Application Note
96029
SHORT SPECIFICATION
Tuning
Frequency bands:
Optionally the following frequency bands are used:
FM: 87.50 - 108.00 MHz (50 / 100 kHz steps)
MW: 531
- 1629 kHz (9 kHz steps)
LW: 144
- 288
kHz (1 kHz steps)
SW: 5.9
- 6.2
MHz (1 kHz steps)
FM: 87.90
MW: 530
SW: 5.9
- 107.90 MHz (100 / 200 kHz steps)
- 1710 kHz (10 kHz steps)
- 6.2
MHz (1 kHz steps)
}
} For application in Europe
}
}
}
} For application in USA
}
PLL tuning principle
Manual tuning up / down
First one step, next after 0.5 seconds. Fast repetition at 12.5 times per second.
Local/Dx switching
The Local/Dx feature controls the search sensitivity. Default after switching on is always Dx.
In the TEA6811 a tuner attenuator for the FM-band is incorporated.
Search tuning up / down
Sensitivity is controlled by Local/Dx. If after one complete band sweep in Local mode no station is
found, the radio switches automatically to Dx. During search tuning the running frequency is displayed
and the radio is muted.
Frequency Scan
Continuous automatic search tuning, pausing for 6 seconds on every station.
AST (Automatic Store Tuning) for FM and MW band
AST switches to FM-AST or MW-AST band, searches for the 6 strongest transmitters in the band and
stores them in the AST programme preset memory. In FM, duplication of PI codes will be avoided.
Programme preset memory
For each band (FM1, FM2, MW, LW, SW (49m), FM-AST and MW-AST) 6 programme presets and a
"manual" frequency are stored. In FM, additional RDS information is stored: PI code (Programme
Identification), PS name (Programme Service), AF list (Alternative Frequencies) and AF follow mode
on/off.
Whenever another band is selected, the radio reverts to the last frequency tuned to in the new band
(this can be either a preset frequency or a manually tuned frequency).
Programme preset up / down control
Programme presets can be stored and recalled by two key control (up and down) or by 6 separate
preset keys.
23
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
AF follow mode
When AF follow mode is on, the set will regularly measure the signal strength of alternative frequencies
and compare it with the current station. If an alternative frequency offers better quality, the radio will
switch over and update the alternative frequency list. The measuring scheme is designed to cause
minimum noticeable disturbance for the listener. The interval time between two measurements depends
on the signal quality.
Intelligent preset programme recall
If an FM programme preset with a known PI code is recalled, the primary frequency and all alternative
frequencies stored in the programme preset memory are examined. The frequency with the best signal
quality broadcasting the correct PI code will be selected. Only when the programme is not found on one
of the AFs, after 6 seconds a search is started for a station with a proper PI code.
TA mode
In TA mode the radio only searches for transmitters that transmit the RDS traffic programme on the
same station or on EON linked stations. The radio will automatically start a search when switching TA
mode on and the current station is not a traffic station.
PTY scan mode
In PTY scan mode the radio searches for transmitters that transmit the user-selected PTY code.
Dependent on the factory option USA/Europe the RBDS PTY-table or the RDS PTY-table is used. Only
English PTY messages are available.
Last status memory: band, frequency, PI code, AF follow mode on/off status and TA mode on/off status
are stored in memory. This status is recalled during switch on.
RDS
Bit, block and group synchronisation. (inclusive RBDS E-block detection).
Data collection and decoding of:
- PI,
Programme Identification code
- AF,
Alternative Frequencies
- TP,
Traffic Programme
- TA,
Traffic Announcement
- PS,
Programme Service name
- PTY,
Programme TYpe
- EON, Enhanced Other Network
AF follow mode using PI and AF (see also Tuning).
Display of the programme service name in 8 alpha-numeric characters (PS name).
Display of AF, TP, TA, PTY, EON and Regional mode status via icons.
Regional mode on/off switching. When Regional mode is on, the radio will, during AF switching, only
switch over to stations with exactly the same PI-code. When Regional mode is off, the radio will also
24
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
switch over to stations broadcasting regional variants of the original station. (so called "generic" or
"family" PI codes). For USA application (RBDS) the regional function will only work for PI codes above
B000hex. PI codes below B000hex do not have regional variants. Af switching is only allowed to stations
with exactly the same PI code.
Break-in of traffic announcements is possible if the TA option is switched on. The PTY alarm messages
break-in always. Break in is possible even when the radio is muted or in CD-changer / cassette /
external mode.
User Control
Up to 27 Local control keys on either a fixed, a detachable keyboard or a combination. Triangular matrix
using 7 lines.
Detachable front
Optionally, the keyboard and the LCD display unit can be placed on a detachable front controlled by
a 2nd I2C bus. Only 5 contacts are required to connect the detachable front (6 if it hosts also the power
key). No extra hardware is required to detect its presence.
EON
If the TA option is on, switch temporarily to an other station if EON information indicates a traffic
announcement on another network even when the radio is muted or in CD-changer / cassette / external
mode.
Maintain lists of alternative frequencies of other stations stored in preset memory with information
received via EON on the currently tuned station.
Display by means of an icon whether EON data is received and whether an EON traffic announcement
is broadcast.
Display
143 Segment LCD with Umlaut (ü) characters, 1:4 multiplexed divided into:
8 Alphanumeric characters + decimal point are used to display:
- Band and frequency (Example: "FM 103.50")
- Indication "BALANCE", "FADER", "TREBLE", "BASS" and their value.
- RDS programme service name (PS) in 8 alphanumeric characters.
- RDS programme type (PTY)
- "MUTE", in case the user mutes the radio, cassette or external
- Cassette mode function such as "PLAY >", "CAS WIND", etc.
- CD-changer messages such as "CD 01.23" , "CHANGER " etc.
7 Segment display for the current programme preset number.
25
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
15 Icons for display of:
- ST
On when stereo pilot signal is detected and the radio is not in forced mono mode.
- AST
On when AST band is selected.
- SCAN
On when in Frequency scan mode.
- AF
On when AF follow mode is enabled (see also Tuning), flashing if no RDS data
received.
- TA
On in TA mode and flashing during a traffic announcement in progress.
- TP
On when a traffic station is received, flashing when the station is not a traffic station
and TA mode is on.
- PTY
On when a PTY code is received, flashing during PTY search.
- DOLBY
On in cassette mode when dolby is on.
- MTL
On in cassette mode when metal/chrome is selected.
- AMS
On in cassette mode when AMS is on.
- REG
On when the radio is in regional mode (see also RDS)
- EON
On when EON data is received, flashing during an EON traffic announcement.
- LOC
On when the radio is in Local mode (see also Tuning)
- LOUD
On when Loudness is on.
- CLIP
On when clipping is detected and clipping control is active.
Non Volatile Memory
512 bytes EEPROM. The following information is stored in NVM:
System status e.g.: band, audio source (radio / CD-changer / cassette / external).
For each band FM1, FM2, FM-AST, MW, MW-AST, LW, SW(49m) : 6 preset frequencies, one nonpreset frequency and the last used preset number.
For each FM preset:
- PI-code
- PS Name
- AF List (9 AF’s)
- AF follow mode on/off.
Audio controls: volume, bass, treble, balance, fader and loudness.
Preprogramming EEPROM
At power-on the contents of the NVM is checked, when a non-initialized EEPROM is detected, the
EEPROM will be preprogrammed with default values.
Appendix II lists the default values written to NVM during initialization.
Sound
Volume, bass, treble, balance and fader control with VOL-UP / VOL-DOWN keys.
Analog control select key to cycle through bass, treble, balance and fader.
Mute function.
Automatic muting during tuning and AST search (silent tuning).
Break-in of traffic announcements and PTY-alarm messages (at increased volume level, which is user
programmable) when the radio is muted or in cassette / external mode.
Loudness function.
26
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Sound settings are stored at switch-off and recalled at switch-on.
"Bleep" tone to confirm user actions such as storing a programme preset, entering AST mode, etc.
Mono / stereo function.
Output pins for mute, loudness and traffic announcement, for use with conventional audio control
circuitry.
Automatic mute of radio during "Phone mute" detection.
Power-amplifier
Power-amplifiers with diagnostic facilities
* 1 × TDA8561Q amplifier for 4 × 12 W ( 2Ω load) or 4 × 7 W or 2 × 24 W bridged application. (both at
4Ω load)
* 1 × TDA8562Q amplifier for 4 × 12 W ( 2Ω load) or 4 × 7 W (4Ω load)
* 2 × TDA8561Q amplifier for 4 × 24 W bridged application. (4Ω load)
Diagnostic control:
* short-circuit or too high temperature detection, display an error message
* signal clipping, via an icon and stepwise decrease of bass and or volume
Optional conventional power-amplifiers (without diagnostics) can be used such as two TDA1552Q for
4 × 22 W, one TDA1554Q for 4 × 11 W (2Ω load) or 4 × 6 W (4Ω load) or one TDA1552Q 2 × 22 W in
a BTL stereo configuration.
Options
Diode programmable
- Detachable front
- Available frequency bands
- Static on/off switch
- Frequency band limits and tuning grid for different parts of the world. This option also selects
between RDS (Europe) and RBDS (USA).
User programmable
- 2 / 4 Loudspeakers
- Loudness on / off
- TA volume level
Automatically detected
- Digital sound control chip or conventional audio control circuitry
- Loudness
- AMS
}
- Dolby
} Cassette deck functions
- MTL
}
- Presence of the CD-changer (check during power-on)
- Availability of a power amplifier with diagnostics facilities
27
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Power connections
Continuous power supply input. Normally connected directly to the car battery. All supply power is
drawn from this supply.
Ignition key input. Normally connected to the accessory contact of the ignition switch. Used only for
switching the radio on/off. This input is also used when the static on/off switch option is chosen instead
of the momentary on/off key.
Switching on/off
Recall of last system status (e.g.: frequency, band, sound control settings, RDS status and last selected
audio source).
Switch on by:
- Power key, can be static or momentary.
- Ignition contact (after the set was switched off by turning the ignition contact off).
Switch off by:
- Power key, can be static or momentary.
- Ignition contact.
- Removal of detachable keyboard.
When switched on while the ignition contact is (and remains) off, the set will automatically switch off
after 60 minutes.
The radio will switch on again when switched off due to a power dip during engine start.
CD-changer
Radio/CD-changer/Cassette/External mode key.
Disc up/down keys for selecting the next/previous disc.
Track up/down keys for selecting the next/previous track.
Fast forward/reverse keys for jumping some grooves forward/backward.
Shuffle on/off key, for playing the tracks in random order. (The user can make a selection between
tracks on the current disc only or tracks on all discs.)
Repeat on/off key, for repetitive play of the current track or the current disc.
Intro-scan key. When Intro-scan mode is on, each track of the current disc or the first track of every disc
(user selectable) are played for 10 seconds in successive order.
28
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Cassette
Automatically switches to cassette mode after insertion of a tape
Interfaces with a mechanically controlled cassette deck
Play/wind mode detection
Play direction detection for auto-reverse cassette decks
Cassette solenoid control
AMS pause detection for full AMS control
Radio sound during cassette winding
MTL on/off key
DOLBY on/off key
AMS on/off key
CD-changer/Cassette/Radio/External mode key
Optional source switching to external mode (external plug is in) or always to radio mode (option diode
D6 is present) when the tape is ejected.
External audio input:
Automatically switches to external audio source when a connector is inserted.
CD-changer/External/radio/Cassette mode key.
Optional source switching to cassette mode (tape is in) or always to radio mode (option diode D6 is
present) when the external plug is removed.
29
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
4
Application Note
96029
CCR612S PINNING AND INTERFACING
CCR612S is accommodated in a P83CE528 microcontroller in a 44-pins Quad Flat Package. It is
manufactured in CMOS technology and is a derivative of the 80C51 microcontroller family. It contains 32
kbytes of ROM and 512 bytes of RAM.
For electrical characteristics of I/O pins, see the P83CE528 data sheet.
4.1
Pinning overview
P1.5
P1.6
P1.7
RST
P3.0
Vs s
P3.1
P3.2
P3.3
P3.4
P3.5
CC R61 2S
(P83CE528)
P0.4
P0.5
P0.6
P0.7
EA
Vs s
ALE
PSEN
P2.7
P2.6
P2.5
P3.6
P3.7
XTAL2
XTAL1
Vss
Vdd
P2.0
P2.1
P2.2
P2.3
P2.4
1
2
3
4
5
6
7
8
9
10
11
33
32
31
30
29
28
27
26
25
24
23
DIAG
SEL1_PAUSE
TA
ON
EA
Vs s
AL E
PSEN
HO LD
KEYB6_ F SC L
KEYB5 _FSDA
RDSDAT
SEL0_SOLND
XTAL2
XTAL1
Vss
Vdd
KEYB0
KEYB1
KEYB2
KEYB3
KEYB4
12
13
14
15
16
17
18
19
20
21
22
EXS TAT
SCL
SD A
RESET
CM TL
Vs s
CAMS
RDSCLK
CDC_ bus
BLPTST
CDOLBY
P1.4
P 1.3
P1.2
P 1.1
P1.0
Vss
Vdd
P0.0
P 0.1
P0.2
P 0.3
44
CENABL
43
AUMUTE
42
LOUD
41
PLL_LOCK
40 OPTROW
39
Vss
38
Vdd
37
CPLYWD
36
IGN
35
CINDRV
34
CDIR
When the radio is equipped with a detachable keyboard, pins KEYB5_FSDA & KEYB6_FSCL (pins 23 &
24) are used as I2C-bus lines to the detachable keyboard. Otherwise pin 23 and pin 24 are used as scan
lines for the fixed keyboard.
Figure 4 Pinning of CCR612S
In case of conventional audio sound control circuitry, pin SEL0_SOLND and SEL1_PAUSE are used to
select between the various audio sources (radio, CD-changer, cassette, external output) by means of a
dual 4 channel analogue multiplexer (e.g. HEF4052B). If a TEA632x is installed these pins can be used
for respectively solenoid control and AMS pause input control.
30
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
The next tables give a description of the function of all pins.
Legend for pin types: OD
IP
1
2
Open Drain
Internal Pull up resistor
Can sink 1 TTL load (or 4 LSTTL)
Can sink 2 TTL loads (or 8 LSTTL)
Pinning CCR612S
Pin
Name
I/O
Type
Description
1
EXSTAT
I
IP 1
Indicates whether external audio source is connected.
High:
Low:
external audio source is not connected
external audio source is connected
2
SCL
I/O
OD 2
Clock line of I2C bus
3
SDA
I/O
OD 2
Data line of I2C bus
4
RESET
I
Normally low. To start the microcontroller, a high pulse of
at least 20 milliseconds must be applied to this pin.
A reset pulse must be applied when:
- Power is applied to the radio
- The power key is pressed while the radio is off
- The ignition contact is switched on while the radio is off
The reset input is normally connected to the reset and hold
outputs of the power stabiliser TDA3602, via a capacitor
and a diode.
5
CMTL
O
IP 1
Cassette Metal (versus Chrome/Ferro) mode
High:
Low:
I
6
Vss
7
CAMS
Ferro/Chrome selected
Metal selected
If the cassette deck does not have this function, the pin
must be connected to Vdd.
Ground
O
IP 1
Automatic Music Search
High:
Low:
I
AMS is active
AMS is inactive
If the cassette deck does not have this function, the pin
must be connected to ground.
31
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pinning CCR612S
Pin
Name
I/O
Type
Description
8
RDSCLK
I
IP 1
RDS Clock line. Connected to clock output pin of RDS
demodulator SAA6579
9
CDC_bus
I
IP 1
CD-changer bus. The CDC_bus is a bi-directional bus
which allows the CD-changer and the radio to exchange
commands and status information.
10
BLPTST
O
IP 1
1. Bleep tone output signal. Normally high. This pin
outputs the bleep tones.
2. When pulled low externally, service mode is entered.
The microcontroller stops all I2C bus transfers after
completion of the last user action (within 0.5 sec.
except for search tuning). This feature can be used for
factory testing and programming the NVM before the
radio leaves the factory.
IP 1
Cassette Dolby mode
High: Dolby not selected
Low: Dolby selected
I
11
CDOLBY
O
I
If the cassette deck does not have this function, the pin
must be connected to Vdd.
12
RDSDAT
I
IP 1
RDS Data line. Connected to data output pin of RDS
demodulator SAA6579.
13
SEL0_
SOLENOID
O
IP 1
SEL0 (no TEA632x installed). Source selection
Sel1 Sel0
0
0 CD-changer source selected
0
1 Cassette source selected
1
0 External source selected
1
1 Radio source selected
O
SOLENOID (TEA632x installed). Cassette solenoid
High: Solenoid in standby position
Low: Solenoid is locked
I
If the cassette deck does not have this function, the pin
must be connected to ground.
O
I
A 12 MHz crystal is connected between these pins,
controlling the internal clock oscillator. When an external
clock is used, it must be applied to XTAL1.
14
15
XTAL2
XTAL1
16
Vss
Ground
17
Vdd
Power supply: + 5V
1824
IP 1
Keyboard scan lines. Pin assignments are different for
fixed front and detachable front. See relevant tables at the
end of this section.
32
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pinning CCR612S
Pin
Name
I/O
Type
Description
25
HOLD
I
IP 1
Connected to the hold output pin of the voltage stabilizer
TDA3602. This pin is used to check for power failures.
26
/PSEN
O
Program Store Enable output, used when the
microcontroller runs code from an external memory. Not
used by the CCR612S system. The pin will always be high.
27
ALE
O
Address Latch Enable output, used when the
microcontroller accesses external memory. Not used by
the CCR612S system. This pin should not be connected.
In the EMC improved microprocessors (P83CE528) this
pin is muted.
28
Vss
29
/EA
I
30
ON
O
Ground
External Access input. Should be held high (with a pull-up
resistor) to ensure that the microcontroller runs from
internal program memory (ROM).
OD 2
Controls the voltage stabiliser TDA3602
High:
Low:
31
TA
O
OD 2
Switch supply voltages off (TDA3602 in "coma"
state)
Switch supply voltages on (TDA3602 in "on"
state)
Traffic Announcement indication
High:
Low:
No traffic announcement
Traffic announcement or PTY alarm message in
progress
This pin can be used to raise the volume setting during
traffic announcements and PTY alarm messages in case
no digital sound control IC is used.
I
Option diode for static on/off switch detection.
33
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pinning CCR612S
Pin
Name
I/O
Type
Description
32
SEL1_
PAUSE
O
OD 2
SEL1 (no TEA632x installed). Source selection
Sel1 Sel0
0
0 CD-changer source selected
0
1 Cassette source selected
1
0 External source selected
1
1 Radio source selected
I
PAUSE (TEA632x installed). Cassette AMS pause
High: No pause detected
Low: Pause detected
If the cassette deck does not have this function, the pin
must be connected to ground.
33
DIAG
I
OD 2
Power amplifiers diagnostics input.
High:
Low:
I
34
CDIR
I
If no diagnostics facilities are available this pin should be
connect to Vdd.
OD 2
Indicates the play direction of the cassette deck. Used to
show the play direction on the display
High:
Low:
35
CINDRV
I
OD 2
IGN
I
OD 2
CPLYWD
I
OD 2
Vdd
Ignition contact / static switch on
Ignition contact / static switch off
Indicates play/wind status of cassette deck. Used to switch
to radio reception during winding.
High:
Low:
38
No tape in drive
Tape in drive
Indicates status of ignition contact or the static on/off
switch (when this option is chosen). Used to switch the set
on or off.
High:
Low:
37
Reverse ( <- arrow displayed)
Forward ( -> arrow displayed)
Indicates whether a tape is in the cassette drive. Used to
switch to cassette mode when a tape is inserted.
High:
Low:
36
Normal mode
Clipping, overheated or shortcircuit.
Wind
Play
Power supply: + 5V
34
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pinning CCR612S
Pin
Name
I/O
Type
Description
39
Vss
40
OPTROW
O
IP 1
Connected to the cathodes of all option diodes. During
switch on, this pin is pulled low by the microcontroller to
find out which option diodes are present.
41
PLL_LOCK
I
IP 1
PLL In Lock detection.
Ground
High:
Low:
42
LOUD
O
IP 1
Loudness control. This pin can be used to switch loudness
on/off in case no digital sound control IC is used.
High:
Low:
AUMUTE
O
IP 1
General mute control. This pin can be used to control
general audio muting in case no sound control IC is used.
High:
Low:
44
CENABL
Loudness off
Loudness on
loudness control is not available when this pin is
connected to ground.
I
43
Tuner is in lock.
Tuner is not in lock.
Not muted
Muted
I
Phone mute input
High:
No phone mute request
Low:
Phone mute request
I
Option diode available bands 1
O
IP 1
Cassette Enable. Controls the cassette deck motor.
High:
Low:
I
Cassette motor off
Cassette motor on
Option diode for detachable keyboard detection.
35
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pins 18 to 24 of CCR612 with fixed front.
Pin
Name
I/O
Type
Description
18
KEYB0
I/O
IP 1
Line of the triangular keyboard matrix
19
KEYB1
I/O
IP 1
Line of the triangular keyboard matrix
20
KEYB2
I/O
I
IP 1
Line of the triangular keyboard matrix
Option diode for tuning grid and band limits (USA / Europe
option)
21
KEYB3
I/O
I
IP 1
Line of the triangular keyboard matrix
Option diode for available bands.
22
KEYB4
I/O
IP 1
Line of the triangular keyboard matrix
23
KEYB5
I/O
IP 1
Line of the triangular keyboard matrix
24
KEYB6
I/O
IP 1
Line of the triangular keyboard matrix
The fixed keyboard (See Figure 6) is scanned every 10 milliseconds. To scan the keyboard, the lines are
made low - one at a time - and then the state of the other lines are read. For debouncing, a keypress must
be detected 3 times before it is accepted.
36
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Pins 18-24 of CCR612 with detachable front
Pin
Name
I/O
Type
Description
18
KEYB0
I/O
IP 1
Line of the triangular keyboard matrix
19
KEYB1
I/O
IP 1
Line of the triangular keyboard matrix
20
KEYB2
I/O
I
IP 1
Line of the triangular keyboard matrix
Option diode for tuning grid and band limits (USA / Europe
option)
21
KEYB3
I/O
I
IP 1
Line of the triangular keyboard matrix
Option diode for available bands.
22
KEYB4
I/O
IP 1
Line of the triangular keyboard matrix
These lines form a small extra triangular keyboard matrix.
(See Figure 7). This keyboard is scanned every 10
milliseconds. To scan the keyboard, the lines are made
low - one at a time - and then the state of the other lines
are read. For debouncing, a keypress must be detected 3
times before it is accepted.
This keyboard can be used optional together with the
detachable keyboard.
The power key should always be available in this
keyboard but not when the static on/off switch option is
used.
23
SDA_
FRONT
I/O
IP 1
Data line of front panel I2C bus.
The detachable front has a separate I2C bus, for which
measures may be taken to reduce interference and to
improve immunity for static charges. It also isolates radio
circuitry from the externally accessible contacts.
The front panel I2C bus controls the display driver and the
8-bit bi-directional I/O expander to which the keyboard
matrix is detected.
24
SCL_
FRONT
I/O
IP 1
Clock line of front panel I2C bus.
37
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
4.2
4.2.1
Application Note
96029
Factory options
Diode options
The following options can be selected by means of option diodes:
Diode
Pin
Description
D1
44
Detachable keyboard is available. (diode present)
D2/D3
21/43
Diode D2
Not present
Present
Not present
Present
D4
No used in CCR612S
31
Tuning grid and band limits for USA application are selected (diode present).
LW band is disabled and the RBDS PTY code table is selected.
D3
44 CENABLE
43 AUMUTE
42
41
40 OPTROW
39
38
37
36
35
34
1
2
3
4
5
6
7
8
9
10
11
D1
P1 .5
P1 .6
P1 .7
RS T
P3 .0
Vss
P3 .1
P3 .2
P3 .3
P3 .4
P3 .5
P0 .4
P0 .5
P0 .6
P0.7
EA
Vss
AL E
PSEN
P2 .7
P2 .6
P2 .5
CCR612S
(P83CE528)
33
32
31
30
29
28
27
26
25
24
23
D5
D2
D7
TA
KEYB2
KEYB3
20
P 1.4
P 1.3
P 1.2
P 1.1
P 1.0
Vss
V dd
P 0.0
P 0.1
P 0.2
P 0.3
D7
Not used in CCR612S
P 3.6
P 3.7
X TA L2
X TA L1
V ss
Vdd
P2 .0
P2 .1
P2.2
P 2.3
P 2.4
D6
Static on/off switch. (diode present)
12
13
14
15
16
17
18
19
20
21
22
D5
Diode D3
Available bands
Not Present
FM, MW, LW
Not Present
FM
Present
FM, MW
Present
FM, MW, LW, SW(49m)
Figure 5 Connection of Option Diodes
38
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
4.2.2
Application Note
96029
Automatically detected options
CCR612S will detect the following options automatically:
Digital sound control chip.
Presence / absence of a sound control chip (TEA632x) is detected by testing its I2C bus address.
NOTE: The output pins AUMUTE, LOUDN and TA are always operational, even when a digital sound
control chip is installed. Cassette solenoid and AMS pause control functions are not available in case
no TEA632x is installed.
AMS
DOLBY
MTL
LOUDNESS
DIAGNOSTICS
}
}
}
}
}
These functions are not available if the corresponding
output pin is connected to Vdd except for pins CAMS
and LOUD which must be connected to ground.
Presence of the CD-changer (check during power-on)
4.3
I2C bus addresses
CCR612 I2C bus peripherals will be accessed at the following addresses:
C4 h
C2 h
80 h
A0 h
PLL synthesizer TEA6811V
IF system TEA6822T
Sound control circuit TEA632x
NVM PCF8594
(The PCF8594 responds automatically to address A2 h for access to its upper half);
40 h I/O expander PCF8574
70 h Display driver PCF8576
4.4
The keyboard
Two different configurations are possible:
1.
A fixed keyboard, directly connected to the microcontroller.
2.
A detachable keyboard, using an I/O expander to connect to the microcontroller via a dedicated
I2C bus. A fixed keyboard with a limited number of keys still remains possible.
39
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
4.4.1
Application Note
96029
Fixed keyboard
The fixed keyboard is scanned every 10 milliseconds. For debouncing, the same situation must be
detected 3 times before it is accepted.
Freq down Previous track/ Fast reverse
Freq up
Next track / Fast forward
Preset down Disc down
Preset up Disc up
Scan
Intro scan/ Disc scan
P2
Disc down
P3
Disc up
P4
Shuffle disc/ Shuffle all
P5
Repeat track/ Repeat disc
P6
Intro scan/ Disc scan
18
P2 . 0 KE YB0
P1
19
P2 . 1 KEYB1
P4 /
AM S
P3
20
P2
P6 /
DOLBY
P2 . 2 KEYB2
P5 /
MT L
CCR612S
21
L O C AL /
DX
AF /
REG
P2 . 3 KEYB3
AU T O /
MAN
22
PRE D OWN /
DOLBY
LOUD/
R ESET
FREQ
DO WN
VO L
DOWN
P2 . 4 KE YB4
MODE
23
P2 . 5 KE YB5 _ F SC L
SEL . D I SP.
SCAN
ST EREO
PR E U P/
MTL
F R EQ . U P
VO L U P
24
P2 . 6 KE YB6 _ F S D A
PT Y
TA
AS T
M UTE
BAND
SEL EC T
POWER
Figure 6 Fixed keyboard
4.4.2
Detachable keyboard
The detachable keyboard is scanned every 20 milliseconds (10 msec. for the small fixed keyboard). For
debouncing, the same situation must be detected 2 times (3 times for the small fixed keyboard) before it
is accepted.
The microcontroller will automatically detect that the detachable front is removed, and will switch the radio
off. Placing the front on the radio does not cause the radio to switch on.
40
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
4
P1
5
P4 /
P3
AM S
P2
L O CAL /
DX
PR E D O WN /
LOUD/
RESET
DO LBY
6
P6 /
P5 /
DO LBY
MTL
AF /
REG
F REQ
VOL
DOWN
DOWN
7
AU T O /
MAN
DETACHABLE
KEYBOARD
SCANNER
9
PCF8574
MODE
10
15
SEL. D ISP.
SC AN
PR E U P/
ST EREO
TA
AS T
B AN D
11
MUTE
23
VO L U P
MT L
PT Y
SD A
P2. 5 KEYB5_F SDA
F R EQ . U P
14
SCL
24
P 2 .6 K E Y B 6 _ F S C L
SELECT
CCR612S
18
P2.0 KEYB0
SC AN
Freq down
Previous track/Fast reverse
Freq up
Next track / Fast forward
19
Pr ese t d own D isc do wn
Preset up
Disc up
Scan
Intro scan/ Disc scan
P2
Disc down
P3
Disc up
P4
Shuffle disc/ Shuffle all
F REQ
LOUD/
DOWN
R ES E T
20
PT Y
P5
Repeat track/ Repeat disc
AF /
P6
Intro scan/ Disc scan
REG
TA
SEL
LOCAL/
DI SP
DX
P 2 .1 K E Y B 1
P2.2 KEYB2
F R EQ .
UP
21
P 2 .3 K E Y B 3
BAND
22
P2. 4 KEYB4
VOL DOWN
VO L UP
AST
SEL ECT
POWER
Figure 7 Detachable keyboard
4.4.3
Keyboard options
Not all keys need to be installed. The following options are possible:
Preset select options
1.
P-1 through P-6 keys.
The function AMS is available in this case.
SHUFFLE DISC, REPEAT TRACK, SHUFFLE ALL and REPEAT DISC are available now.
2.
PRE-UP / PRE-DOWN keys.
The function AMS is not available in this case.
SHUFFLE DISC, REPEAT TRACK, SHUFFLE ALL and REPEAT DISC are not available now.
41
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
No digital sound control chip installed.
In this case, the keys VOL-UP, VOL-DOWN are not required.
The following keys are optional. If omitted, the related functionality is not available, but other functions
are not affected.
- AUTO/MANUAL
- LOUD
-
(Function also available by pressing FREQ-UP and FREQ-DOWN together)
(Loudness function also available in user programmable options; reset function
not available)
DISPLAY
PTY
MUTE
MODE
SCAN
LOCAL/DX
By means of an option diode, a selection can be made for a momentary power key (connected to port
KEYB0 and ground) or a static on/off key (connected between port IGN and ground).
4.5
Power stabilizer interface.
For switching the radio on and off, the microcontroller is linked with the voltage stabilizer circuit TDA3602.
The pins involved in this interface are RESET, ON and HOLD.
Figure 8 shows a circuit diagram of the reset circuitry and the voltage stabilizer interface.
The TDA3602 has a number of different states, which are selected by the voltage on the state control input
Vsc on pin 4. The following states are used:
State
Vsc
Description
OFF
-
No power
COMA
> 3.6 V
State when radio is off. Microcontroller supply is
in low current mode; other supply voltages are
off.
RESET
1.2V < Vsc < 2.0V
State during reset. Microcontroller supply is in
high current mode; other supply voltages are still
off.
ON
< 1.2 V
State when radio is on. All supply voltages are on.
To switch the radio on, the voltage stabilizer must be brought in reset state. It generates a reset pulse for
the microcontroller with its reset output pin. The microcontroller program starts, and decides whether the
radio must stay on or must switch off again. When it must stay on, output pin "ON" is pulled low, bringing
the TDA3602 in the "ON" state. Else, the stabilizer stays in reset state, or returns to coma state eventually.
42
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
The following events must bring the voltage stabilizer in reset state:
Main power supplied
Ignition or static on/off switch closed
Power key pressed
Power voltage is OK again after an engine start
The reset pulse for the microcontroller must be at least 20 msec. wide, measured at the threshold level
(max. 3.5 V).
After the end of the reset pulse the power key is sensed and the "KEYB0" output is pulled low to keep the
stabilizer into the reset mode.
When the radio should stay on, (see switching on and off, paragraph 6.1), the "ON" output is pulled low
after the check of the option diodes and when the power key is released.
After approximately 400 msec., the microcontroller tests the HOLD input. If it is low, something is wrong
and the set is switched off, but internally a reset will be generated and the set will try to switch on again.
Else it is continuously monitored for supply voltage failure e.g. starting the cars engine.
Ignition Cont ac t or
st at ic on/off
s w it c h
BATTERY
7.5A
160 µ H
2200µ
VS3 +5V
standby
HO LD
25
1
Vdd
5
18
KEYB0
D1
47µ
CCR612S
1k
30
Vs c
4
C1
47n
47n
10k
3
470n
47n
C2
1µ
47k
680µ
VS1 +8.5V
S ta te
C o ntr o l
Vre g 1
2
47µ
R ES ET
T1
Vre g 2
4k7
1 20 k
Vss
8
VS2 +5V
1 00 k
4
Vbu
TDA3602
Power
Stabilizer
33k
R ES ET
Vp
7 Vreg3
POWER
key
ON
HO LD
47k
9
47µ
GND
6
IG N
36
T2
22k
470n 1 2 0 k
100n/
for static
on/off swiitch 10µ
4V7
1 00 k
47k
Figure 8 Interface with TDA3602 Power stabilizer
Note,
The power key is a momentary push-button, closed only as long as it is pressed down.
43
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
4.6
Application Note
96029
LCD display.
The LCD display is a 143 segment display, with a character set that includes umlaut (ü) characters.
The display consists of the following fields:
- Text field for 8 alpha-numerical characters;
- Numerical digit for display of the preset number;
- 15 Icons for: REG, EON, AST, SCAN, LOC, AF, TP, ST, TA, PTY, LOUD, DOLBY, CLIP, MTL, AMS.
Figure 9 shows a possible layout of the LCD display
EON AST SCAN LOC AF TP
ST TA PTY
LOUD
CLIP
MTL
R EG
AMS
P2
Digit 1
2
3
4
5
6
7
8
9
P
A
F
K
G
I
A
L
F
B
B
G
J
E
E
M
H
N C
C
D
D
Figure 9 Liquid Crystal Display (LCD)
The 143 segment display is driven by one PCF8576 operating in 1:4 multiplex mode (4 backplanes BP0,
BP1, BP2 and BP3) and a 1/4 (4 levels) LCD bias configuration.
44
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Appendix II defines the connection of the segments of the display. Appendix III shows the character set.
Figure 10 shows a diagram of the LCD driver interface.
EON AST SCAN LOC AF TP
BP0
ST TA PTY
LOUD
CLIP
BP2
BP1
BP3
MTL
R EG
AMS
P2
2
Digit 1
3
4
5
6
7
8
S0
S39
Vdd
OSC
BP3
SA0
PCF8576
BP1
SCL SD A
A0
A1
A2
Vss
Vlcd
BP0
BP2
+5V
9
I²C-bus
Figure 10 Display module for 143 segments with PCF8576
4.7
Non Volatile Memory.
This device is a 512 byte static CMOS EEPROM with I2C-bus interface. It has low power consumption and
guarantee a minimum of 100,000 erase/write cycles per byte and 10 years of non volatile data retention.
+5V
1
2
3
4
WP
Vdd
A1
RC
A2
Vs s
PCF8594
SCL
SDA
8
7
6
5
Figure 11 Non-Volatile Memory
Appendix I shows the layout of data in the NVM.
45
I²C-Bus
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
5
Application Note
96029
KEY FUNCTIONS
In the following table External mode is: CD-changer mode, Cassette mode or External plug mode.
Key
Description
POWER
When the radio is off, this key generates a reset pulse to start the
microcontroller. The voltage stabilizer is switched on, but the radio will start
playing only after the key is released.
Pressed while the radio was on, the radio is switched off. It saves all
information about its current setting, and restores the information when
switched on again.
BAND
Step cyclically through the tuning bands (not accessible in Cassette & External
mode) in the order:
FM-1 -> FM-2 -> MW -> LW -> SW -> FM-1 -> ...
FM-AST -> FM-1 -> ...
MW-AST -> MW -> ...
Depending on the installed band option diodes, the LW, MW and or SW bands
may be skipped. Depending on the option concerning the band limits and
tuning grid the LW band will be disabled (option set to USA).
When a new band is selected, the radio is tuned to the preset or frequency that
was last used in that band.
In option programming mode, this key toggles the current option:
2 SPKRS
<-> 4 SPKRS
LOUD OFF <-> LOUD ON
TA LVL -2 <-> -1..0..+1..+2
46
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
AST
When pressed short (not in Cassette & External mode) :
- If the radio is in FM-1 or FM-2 band, it switches to FM-AST band.
- If the radio is in MW band, it switches to MW-AST band.
- In other bands, nothing happens.
In the new band, the radio selects the preset or frequency that was last used
in that band.
When pressed longer than 2 seconds (until the radio bleeps):
The radio switches to FM-AST or MW-AST band as described above, and
starts an AST search in that band. (Not in the LW, SW band). The TA mode
is ignored during the AST search.
In an AST search, the whole band is scanned, and the 6 strongest stations
are stored in the 6 preset memories, strongest station first.
When less than 6 stations are found, higher preset locations are not
changed. When the AST search is completed, the radio bleeps and selects
preset 1. The AST search can also be started if the radio is in cassette mode
or in external mode.
AUTO/MANUAL
This key is used to switch between automatic and manual tuning mode (not in
Cassette & External Mode). When in automatic tuning mode the FREQ-UP /
FREQ-DOWN keys are pressed, the radio increases or decreases the
frequency until a station is found. In manual tuning mode the frequency runs
as long as the FREQ-UP / FREQ-DOWN key is pressed, and stops as soon as
the key is released.
The display will show the new state as either "AUTO" or "MANUAL" for 4
seconds. After that period, the band and frequency will be displayed for at
least 2 seconds.
FREQ-UP
FREQ-DOWN
These keys are used for tuning. Operation depends on the auto/manual
switch. (FREQ-UP & FREQ-DOWN keys are not accessible in Cassette &
External mode)
The preset number is removed from the display when the radio was previously
in preset mode (a preset number was displayed).
The radio will be muted during tuning.
The display will show at any moment the band and current frequency.
When the two keys are pressed together, the radio switches between
search/manual tuning just as if the AUTO/MANUAL key is pressed. This can
be used as an alternative for the AUTO/MANUAL key.
47
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
(continued)
FREQ-UP
FREQ-DOWN
Automatic tuning mode:
The radio will increase/decrease the frequency until a new station is found.
At the end of the band it will wrap around and continue on the other side. If
after one bandsweep no stations are found and in Local mode the radio will
switch to Dx mode, the search then will stop after one complete sweep in Dx
mode.
Band
FM
MW
LW
SW
Frequency step size
USA
Europe
200 kHz
100 kHz
10 kHz
9 kHz
1 kHz
1 kHz
1 kHz
In FM:
- When TA mode is on, the search will only stop at traffic stations.
Manual tuning mode:
The radio will increase/decrease the frequency as long as the FREQ-UP /
FREQ-DOWN key is pressed. The radio will go back to automatic tuning
mode when the FREQ-UP / FREQ-DOWN keys are not pressed within 6
seconds.
Band Frequency step size
USA
Europe
First step
FM
100
50 kHz
de-mute when key released MW
10
9
kHz
LW
1
kHz
SW
1
1
kHz
After 0.5 seconds
FM
200
100 kHz
12.5 steps/second
MW
10
9
kHz
de-mute when key released LW
1
kHz
SW
1
1
kHz
In user option programming mode, the FREQ-UP / FREQ-DOWN keys are
used to step through the available options. Each option can be toggled by the
band key.
48
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
(continued)
FREQ-UP
FREQ-DOWN
CD-changer mode, short press.
In CD-changer mode a short push on the FREQ UP and FREQ DOWN keys is
used to respectively move one track up or one track down.
CD-changer mode, long press.
In CD-changer mode pushing FREQ UP or FREQ DOWN longer then two
seconds is used to respectively play the CD fast-forward or fast-backward.
SCAN
Frequency Scan. Continuous automatic search tuning, pausing for 6 seconds
on every station found.
The search direction is always search up and the algorithm is the same as for
the normal search, see keys FREQ-UP / FREQ-DOWN.
INTRO SCAN
CD-changer mode, short press.
In CD-changer mode a short push on the SCAN key will start the intro scan
mode of the CD-changer. The CD-changer will now play the first ten seconds
of each track on the current CD. The intro scan mode can be cancelled by a
second short push on the SCAN key, by pushing an other CD-changer control
key or by leaving CD mode.
DISC SCAN
CD-changer mode, long press.
In CD-changer mode a long push on the SCAN key will start the intro disc
mode of the CD-changer. The CD-changer will now play the first ten seconds
of each available disc. The disc scan mode can be cancelled by a short push
on the SCAN key, by pushing an other CD-changer control key or by leaving
CD mode.
P1 - P6
When pressed short, these keys select a preset programme directly. The AF
follow mode on/off state will be set according to the state stored in NVM.
When pressed longer than 2 seconds (until the radio bleeps), these keys serve
to store the current station in preset memory. In FM, the state of the AF follow
mode on/off switch is stored together with the frequency. Also the RDS PI
code, programme service name and AF list are stored.
AMS
MTL
DOLBY
In cassette mode, some of these keys have additional functions:
- P4 Switch the AMS function on/off. When on, the AMS icon is on.
- P5
Switch MTL mode on/off. When on, the MTL icon is on.
- P6
Switch DOLBY on/off. When on, the DOLBY icon is on.
49
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
(continued)
CD-changer mode, short press.
In CD-changer mode, the keys P2, P3, P4, P5, P6 have additional functions:
- P2 Move to the next available disc
- P3 Move to an eventual previous disc
- P4 Switch the CD-changer to shuffle mode. The CD-changer will now play
the tracks on the current disc in random order. Shuffle track mode is
cancelled by shortly pressing P4 once more or by selecting an other
CD-changer mode.
- P5 Switch the CD-changer to repeat mode. The CD-changer will now repeat
playing the current track. Repeat mode can be cancelled by shortly
pressing P5 once more or by selecting an other CD-changer mode.
- P6 In CD-changer mode a short push on the P6 key will start the intro scan
mode of the CD-changer. The CD-changer will now play the first ten
seconds of each track on the current CD. The intro scan mode can be
cancelled by a second short push on the P6 key, by pushing an other
CD-changer control key or by leaving CD mode.
DISC DOWN
DISC UP
SHUFFLE DISC
REPEAT TRACK
INTRO SCAN
SHUFFLE ALL
REPEAT DISC
DISC SCAN
CD-changer mode, long press
In CD-changer mode, a long press on the keys P4, P5, P6 provides additional
functions:
- P4 Switch the CD-changer to shuffle disc mode. The CD-changer will now
play the tracks on the all available disc in random order. Shuffle disc
mode is cancelled by shortly pressing P4 or by selecting an other
CD-changer mode.
- P5 Switch the CD-changer to repeat disc mode. The CD-changer will now
repeat playing the current disc. Repeat disc can be cancelled by shortly
pressing P5 or by selecting an other CD-changer mode.
- P6 In CD-changer mode a long push on the P6 key will start the intro disc
mode of the CD-changer. The CD-changer will now play the first ten
seconds of each track on the current CD. The intro scan mode can be
cancelled by a short push on the P6 key, by pushing an other CD-changer
control key or by leaving CD mode.
50
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
PRE-UP
PRE-DOWN
These keys are installed only if the keys P1 - P6 are not installed.
When pressed short, these keys are used to step to the next/previous preset
programme. The AF follow mode on/off state will be set according to the state
stored in NVM.
When pressed longer than 2 seconds (until the radio bleeps), the current
station is stored in the last selected preset number. In FM, the state of the AF
follow mode is stored together with the frequency. Also the RDS PI code,
programme service name and AF list are stored.
When PRE-UP and PRE-DOWN are pressed together, the current programme
can be stored in a preset number to be selected:
1. A blinking preset number will be displayed.
2. Press PRE-UP or PRE-DOWN to step to the desired preset number.
3. Press either PRE-UP or PRE-DOWN longer than 2 seconds (until the
radio bleeps). The station is now stored. The preset number on the
display becomes steady again.
MTL
DOLBY
In cassette mode, these keys have additional functions:
- PRE-UP
Switch MTL mode on/off
When on, the MTL icon is on.
- PRE-DOWN Switch DOLBY on/off.
When on, the DOLBY icon is on.
DISC UP
DISC DOWN
CD-changer mode:
In CD-changer mode, the keys PRE UP and PRE DOWN P6 have additional
functions:
- PRE UP
Move to the next available disc
- PRE DOWN Move to an eventual previous disc
PTY
This key is active only if the radio is in FM.
When pressed the current received PTY code is displayed. In case no PTY
code is received, "NO PTY" is displayed.
The user can now select a PTY code with FREQ-UP / FREQ-DOWN keys.
When no key was pressed for 6 seconds, the radio returns to normal mode.
The PTY scan is started by pressing the PTY key for 2 seconds (until the radio
bleeps). A search is started for the selected PTY code.
When a PTY code is received the PTY icon is on.
When a PTY search is busy, the PTY icon is blinking.
51
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Key
Description
TA
This key is active only if the radio is in FM.
Application Note
96029
It serves to switch TA mode on/off.
When TA mode is on, and a traffic announcement is transmitted:
- If the radio is muted, it will be de-muted for the duration of the traffic
announcement.
- If the radio was in cassette or external mode, it will switch temporarily to
radio mode.
- Temporary switch over to an EON linked station when EON detects a traffic
announcement on that other station.
- If the volume setting was very low, it will be raised temporarily. If the user
does not change the volume setting, it will return to the original value at the
end of the traffic announcement.
- The TA icon (and the EON icon in case of EON TA) will blink.
The current traffic announcement can be cancelled by pressing the TA key,
the TA mode will not be switched off. This can be useful to cancel for example
an unwanted EON traffic announcement.
The radio will automatically start a search when switching on TA mode and the
current station is not a traffic station.
52
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Key
Description
AF
When pressed short:
Switches AF follow mode on/off.
Application Note
96029
The state of the AF follow mode is displayed by the AF Icon:
Icon off:
AF follow mode off
Icon on:
AF follow mode on; RDS reception OK.
Icon blinking: AF follow mode selected, but no RDS data
received.
When AF follow mode is on, the radio will from time to time measure the
signal strength of the alternative frequencies that come with the RDS data.
The interval between measurements depends on the signal strength of the
current station, in the order of 1 minute for strong stations to a few seconds
for weak stations. When the radio finds an alternative frequency that is - in
several successive measurements - stronger than the current frequency, it
switches over to that frequency.
REGIONAL
When pressed longer than 2 seconds (until the radio bleeps):
Toggles the regional on/off status displayed via an icon.
To check whether an alternative frequency is a real alternative for the
current station, the radio compares PI codes.
- Regional mode is on:
The PI codes must be exactly identical or a SUPRA regional variant.
- Regional mode is off:
The region identification code in the PI code is ignored.
When regional mode is off, the radio may switch to any programme service
carrying a PI code equal to the current PI code. In this case the regional
identification is not taken into account. When regional mode is on, the radio
will only switch to a programme service carrying exactly the same
programme. In both cases the radio may switch to transmitters broadcasting
in Supra-regional mode. For USA application (RBDS) the regional function
will only work for PI codes above B000hex. PI codes below B000hex do not
have regional variants. AF switching is only allowed to stations with exactly
the same PI code.
53
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
DISPLAY
By default (in radio mode), the display will show the programme service name
of the current station, or - when not available - the band and frequency.
The display key serves to show available information:
- Programme TYpe name
- Band and frequency
- Programme Service name
Each time this key is pressed, the display changes to the next item in the list. If
an item is not available, it is skipped.
When the display key is not pressed within 6 seconds, or when any other key
is pressed, the display returns to the default state.
DISPLAY
CD-changer mode.
In CD-changer mode the key DISPLAY is used to show the time played from
the current track. The display mode will be cancelled automatically after ten
seconds.
VOL-UP,
VOL-DOWN
These keys are installed only if a digital sound control chip is installed.
The VOL-UP and VOL-DOWN keys increment/decrement the setting of the
current analogue function. The setting is changed with 4/8 steps per second,
as long as the key is held down, or until the end of the range has been
reached. For volume, balance and fader, each step is variable dB (8 steps per
second), for bass each step is 1.5 dB (TEA6320/6322) or 1.8 dB
(TEA6321/6323) and for treble each step is 1.5 dB (4 steps per second).
By default, volume is changed. No indication on the display is given in that
case.
With the select key, the function on which the VOL-UP and VOL-DOWN keys
operate can be changed to: bass, treble, balance or fader. (See select key
description). In these modes, the setting is shown on the display.
SELECT
When pressed short:
It changes the function on which the VOL-UP, VOL-DOWN keys operate to:
bass, treble, balance or fader. Each time the key is pressed, the next
function is selected.
The fader function is only available if the 2/4 loudspeakers option in the user
programmable options was set to "4 SPKRS".
By default, the VOL-UP and VOL-DOWN keys operate on volume. When
none of the keys select, VOL-UP or VOL-DOWN is pressed within 6
seconds, or when any other key is pressed, the default function volume is
restored. This key function is disabled if no digital sound control chip is
installed.
54
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
(continued)
SELECT
When pressed longer than 4 seconds (until the radio bleeps):
User option programming mode is entered.
In this mode the user can select the next options:
- 2-Loudspeakers / 4-Loudspeakers,
(in 2-speaker mode, the fader function is not available).
(This option is skipped when no digital sound control chip is
installed).
- Loudness on/off,
(alternative for the loudness key, if loudness option is available).
- TA volume (A selection can be made of 5 different sound levels for
traffic news and PTY alarm messages This option is skipped when no
digital sound control chip is installed).
The FREQ-UP / FREQ-DOWN keys must be used to step through the
functions that can be selected.
The band key must be used to toggle an option.
The user option programming mode is left when the select key is pressed
again, when none of the keys select, FREQ-UP / FREQ-DOWN or band is
pressed for 6 seconds, or when any other key is pressed.
LOUD
When pressed short:
Toggles the loudness on/off state. When loudness is on, bass and treble is
added to the analog settings when the volume setting is low.
RESET
When pressed longer than 4 seconds (until the radio bleeps):
Performs an analogue reset function: bass, treble, balance and fader are set
to mid-range, and loudness is switched off.
MUTE
This key serves to switch the "muted" state on/off.
When muted:
- All audio output is suppressed
- The text "MUTE" is displayed.
- In cassette mode the cassette player will be stopped.
- In CD-changer mode the CD-changer will be stopped.
The muted state is switched off, when the mute key is pressed again, or when
any other key is pressed. The muted state will be temporarily suspended when
the radio is in TA mode and a traffic announcement is received, or when a PTY
alarm message is received.
55
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key
Description
STEREO
This key is only active in FM. It is used to force mono reception if stereo
reception has too much noise. The mono/stereo state is reset to stereo by all
user tuning operations or preset selections.
After pressing the key, the current state is displayed in the LCD text window by
means of the text "STEREO" or "MONO" for 4 seconds. If - within that period the key is pressed again, the state is toggled (only possible when a stereo
transmitter is received), and the new state is displayed - again for 4 seconds.
The stereo icon on the display shows the state of the stereo decoder. The icon
is on in case of stereo reception. The icon is off in case of mono reception or in
case forced mono is selected.
LOCAL/DX
This key can be used to control an attenuator in the FM antenna circuit during
search. Attenuation may be inserted to reduce intermodulation caused by
strong adjacent stations.
By pressing the LOCAL/DX key, the current Local / Dx status is toggled. This
status is displayed via an icon.
For FM, the Local / Dx switch is incorporated in the TEA6811. Putting the radio
in Local mode results in an attenuation of the aerial signal with 15 dB. For AM,
the signal levels read back from the TEA6822 are used to create the Local /Dx
functionality. In AM mode, the search stop level for Local is set 22 dB higher
than when the radio is in Dx-mode.
MODE
This key is used to overrule the default selection of the audio source: radio,
CD-changer, cassette or external.
Each time the key is pressed, the next input source is selected in the order:
radio -> CD-changer -> cassette -> external
with the restrictions:
- CD-changer is selected only if the CD-changer was connected during
power-on.
- Cassette is selected only if a tape is present in the cassette deck.
- External is selected only if a connector is inserted in the external input
jack.
56
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
6 FUNCTIONAL DESCRIPTION
6.1
Switching on / off
To switch the radio on, a reset pulse must be applied to the microcontroller. The software will then perform
a number of checks, and may either turn on all voltages, or switch the radio off again.
With a bad battery, the voltage may drop so far that the "HOLD" output of the voltage stabilizer goes low,
e.g. during starting of the cars engine, and the radio switches off. The radio will switch on immediately
when the voltage returns to a normal value.
If the radio was previously switched off by turning the ignition off, it will switch on when the ignition key is
turned on again.
The radio can also be switched on with the power key while ignition is off. In that case a sleep timer is
started that turns the radio off after 60 minutes unless ignition is switched on in the mean time.
The table below shows the differences between the static on/off switch and the momentary power key.
Option
Pin or key
Switch on
Switch off
Momentary
on/off key
Power key
Power key pressed.
Power key pressed.
IGN pin
When previous switched off
by IGN.
When IGN pin goes low.
After 60 minutes when
switched on by power key
while IGN pin was low.
Static on/off
switch
Static
switch
When switch is closed.
When switch is open.
Valid for
both
Power
supply
When power supply is OK
again.
When a power failure is
detected.
Detachable
keyboard
When keyboard is removed.
57
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.2
6.2.1
Application Note
96029
Tuning
Band switching
Band switching can be done with the AST and BAND keys (see Figure 12). In the AST bands, the AST
icon is on. Band switching is only accessible in Radio Mode.
BAND
FM-1
AST
FM-2
FM-AST
BAND
BAND
BAND
BAND
SW
MW-AST
MW
BAND
AST
LW
B AN D
Figure 12 Band selection
6.2.2
Manual/search tuning
Figure 13 shows how to switch between the tuning modes. In preset mode, a preset number is shown on
the display. In other modes, no preset number is shown. When leaving preset mode, any update of preset
data (current frequency, PS name, AF list, AF follow mode bit) is stored in NVM. Switching of tuning mode
may be done either by pressing FREQ-UP and FREQ-DOWN keys together, or by pressing the AUTO /
MANUAL key. When pressing AUTO / MANUAL or FREQ-UP / FREQ-DOWN, a message "AUTO" or
"MANUAL" is shown on the display to indicate the new state.
When key FREQ-UP or FREQ-DOWN is pressed, the radio will make one frequency step. When the key
is pressed longer than 0.5 seconds, the frequency will start to run with a repetition rate of 12.5 steps per
second.
First tuning step
- De-mute at key release
- Frequency step size:
SW LW MW FM
USA
1
10 100 kHz
Europe
1
1
9
50 kHz
58
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Repetitive steps (after 0.5 sec)
- 12.5 steps/sec
- De-mute at key release
- Frequency step size:
SW LW MW FM
USA
1
10 200 kHz
Europe
1
1
9
100 kHz
PRE UP PRE DOWN
1
2
3
4
5
6
PRESET
MODE
1
FREQ UP FREQ DOWN
AUT OMAT IC
SEARCH
MODE
PRE UP PRE DOWN
2
3
4
5
6
A UT O / M A N
AUTO /M AN
A UT O / M A N
MANUAL
T UNING
MODE
6 se c
ti m eo ut
Figure 13 Tuning modes
In search tuning mode, after pressing the FREQ-UP / FREQ-DOWN key, the frequency starts running and
will stop on either a new frequency or at the frequency from which the search was started. For this search
action two criteria are taken into account:
- search sensitivity Local (high signal level) or Dx (low signal level).
- Ta mode on, the search will only stop at traffic programmes.
When the radio is in Local mode and after one band sweep no station was found, the search sensitivity
is switched to Dx. If still no valid station can be found, the radio returns to the frequency from which the
search was started.
Depending on these criteria a maximum of two band sweeps will be made, trying to offer a frequency
fulfilling the search criteria.
For FM, a Local / Dx switch is incorporated in the TEA6811. Putting the radio in Local mode results in an
attenuation of the aerial signal with 15 dB. For AM, the signal levels read back from the TEA6822 are used
to create the Local /Dx functionality. In AM mode, the search stop level for Local is set 22 dB higher than
when the radio is in Dx-mode.
During a tuning action - manual or automatic - the display will show the running frequency at any time.
59
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.2.3
Application Note
96029
Frequency scan
The frequency scan mode enables the user to listen to all stations transmitted in the selected band (FM,
MW, LW or SW). The radio pauses for 6 seconds on every station found before search is started again.
During frequency scan, TA mode is included in the stop criteria in the same way as during normal search.
EON traffic announcements are skipped during frequency scan mode.
Frequency scan is cancelled by every other tuning function. The radio will switch to the last valid station
when the cancelling takes place during search. Frequency scan mode is only accessible when the radio
is in Radio Mode.
6.2.4
Selecting preset stations
In each band, there are 6 presets. To select a preset station:
If the radio is equipped with 6 preset selection keys (P1 - P6)
- Press short on the key of the desired station.
If the radio is equipped only with PRE-UP / PRE-DOWN keys
- Press either PRE-UP or PRE-DOWN repeatedly until the desired station is selected.
(Do not hold down the key, because then the preset store function will be executed).
If initially no preset number was displayed, the first preset selected will be the last preset number
used in the band.
Selecting preset stations is only accessible in Radio Mode.
6.2.5
Storing stations in preset memory
If the radio is equipped with 6 preset selection keys (P1 - P6)
- Press key of the preset number to be stored until the radio bleeps (2 seconds).
The station is now stored.
If the radio is equipped only with PRE-UP / PRE-DOWN keys
- If the current preset number is the desired preset number:
- Press either the PRE-UP or PRE-DOWN key until the radio bleeps (2 seconds).
The station is now stored.
- If the current preset number is not the desired preset number:
- Press keys PRE-UP and PRE-DOWN at the same time.
The preset number will start to blink.
- Press either PRE-UP or PRE-DOWN repeatedly until the desired preset number is displayed.
(The tuned frequency does not change).
- Press either the PRE-UP or PRE-DOWN key until the radio bleeps (2 seconds).
The station is now stored. The preset number stops blinking.
The preset store mode is cancelled when the PRE-UP and PRE-DOWN are pressed again
together, when an other key is pressed or when no key is pressed for 6 seconds.
Storing stations in preset memory is only accessible in Radio Mode.
60
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.2.6
Application Note
96029
AST search
To start an AST (Automatic Store Tuning) search, press the AST key until the radio bleeps (2 seconds).
Now, the following actions are taken:
1. If the radio is not in an AST band, it switches to the relevant AST band
FM-1, FM-2 -> FM-AST
MW
-> MW-AST
AST is not available in the LW and SW bands.
2. The 6 strongest stations will be stored in the NVM, ignoring TA mode. The whole band is scanned
for transmitters, a maximum of two sweeps will be made, one in Local mode and if necessary one
in Dx mode). If less than 6 stations were found, the last preset memory locations are not replaced.
3. Preset-1 is selected.
During the whole process, the radio is muted and the message "STORE" is shown on the display unless
the radio is in CD-changer / External / Cassette Mode.
6.2.7
The LOCAL/DX key
The user can control the search sensitivity of the radio via the so called Local/Dx feature. In Local mode,
the radio will only stop at strong stations. In Dx mode, a search action will also stop at weaker stations. The
Local/Dx status is displayed via an icon. After power on, the radio will always go in Dx mode.
When the radio is in search tuning mode the tuner Local/Dx status depends on the Local/Dx setting. As
soon as the radio is in stable tuning condition the tuner attenuator status will be Dx.
6.3
CD-Changer, Cassette and external source interface
CCR612 is equipped with five different audio sources (radio, CD-changer, cassette, external plug and
bleep) each source is associated with a corresponding mode. Only one source can be selected at a time.
Source selection is accomplished by the sofac or by source select pins in case no sofac is installed.
Source switching can be invoked in two ways. The first way is pushing the MODE key, this will result in
toggling through all available sources(Radio, CD-changer, Cassette, External plug, Radio). Furthermore
an external event can invoke the source switching ( see Figure 14). The following external events are
possible: insert cassette, eject cassette, insert external plug and remove external plug.
Automatic selections can be overruled by the MODE key.
When the radio is switched off, the source select state is stored in NVM. The same state is selected again
when the radio is switched on.
61
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Radio
mode
connector out
t ape ou t
tape in
co nne ctor in
Ext ernal
m ode
CD-changer
mo de
Ca ssette
mode
Figure 14 Source selection by external event.
6.3.1
The MODE key
Automatic source selection can be overruled by using the MODE key. Each time the MODE key is
pressed, the next source is selected in the order:
Radio -> CD-changer -> Cassette -> External.
Cassette mode can be selected only if a tape is present in the cassette deck.
External mode can be selected only if a connector is present in the external audio jack.
6.3.2
CD-changer mode
The presence of a CD-changer is asserted during the power-on phase of the radio. The CD-changer can
only be selected if the CD-changer was present during power-on. The CD-changer mode can only be
selected with the MODE key.
While in CD-changer mode the following key mapping applies:
TABLE Key mapping in CD-changer mode
Key
short press
long press
FREQ-UP
NEXT TRACK
FAST FORWARD
FREQ-DOWN
PREVIOUS TRACK
FAST REVERS
PRE-UP
DISC UP
PRE-DOWN
DISC DOWN
P2
DISC DOWN
P3
DISC UP
P4
SHUFFLE DISC
SHUFFLE ALL
P5
REPEAT TRACK
REPEAT DISC
P6
INTRO SCAN
DISC SCAN
SCAN
INTRO SCAN
DISC SCAN
62
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.3.3
Application Note
96029
Cassette functions
The cassette interface is based on a mechanical tape deck. When a cassette is playing, the display will
show the text "PLAY >" or "PLAY <" indicating the play direction. During fast winding, no direction
information is available. The display will show "CAS WIND". When fast winding for more than 4 seconds,
the set will temporarily switch to radio mode.
While in cassette mode, the keys P-4, P-5/PRE-UP and P-6/PRE-DOWN control the functions AMS
(Automatic Music Search), MTL (Metal/Chromium) and Dolby respectively. The keys toggle the
corresponding output pins, the function itself is executed by the cassette deck circuitry. When a function
is not available in the cassette deck, the corresponding pin must be connected to ground.
The state of the AMS, ME/CR and Dolby functions is displayed by icons. If a TEA632x is installed the
cassette solenoid and AMS pause function are available. The solenoid function takes care of playing in
the correct direction after switching to cassette mode and together with the AMS pause function, it takes
care of controlling the AMS function. Search (in both directions) for the next music piece by detecting a
blank area on the tape. If no TEA632x is installed (potentiometer sound control) the AMS function and the
solenoid function are not available. If the cassette drive does not have the AMS function the CAMS pin
must be connected to ground.
6.3.4
External audio source
An external audio input is available to connect e.g. a CD player. The external input jack has a switch to
sense whether a connector is inserted. While the radio is in external mode, the text "EXTERNAL" is shown
on the display. When no external audio selection is available the EXSTAT pin must be connected to
Ground.
6.4
Audio control
Most of the audio control facilities are available only if a digital sound and fader control chip (Sofac) is
installed. If no digital sound control chip is used, the following signals should be used in combination with
potentiometer control:
- pin AUMUTE
Mute status;
- pin LOUDN
Loudness status;
- pin TA
Traffic announcement or PTY alarm message in progress;
- pin SEL0 / SEL1 Source selection.
The volume at power on is limited to -10 dB when digital sound control is available.
63
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.4.1
Application Note
96029
The SELECT key
By default, the VOL-UP and VOL-DOWN keys control the volume. To select other functions, press the
select key short until the desired function is shown on the display. Figure 15 shows how control functions
are selected using the select key. If the 2-speaker option is selected in the user programmable options,
the fader function is not available and the fader setting is always mid-range. This function is disabled if no
digital sound control chip is installed.
VOLUME
SELECT
BAS S
SELECT
TREBLE
SELECT
BALANCE
S E LE C T
FADE R
SELECT
6 sec
6 sec
6 sec
6 sec
ti m e o u t
ti m e o u t
ti m e o u t
ti m e o u t
Figure 15 Selection of sound control functions
6.4.2
Changing a setting
To change a setting, press the VOL-UP or VOL-DOWN key until the desired level is reached. As long as
a key is pressed, the bass and treble function changes with 4 steps per second and the volume, balance
and fader function will change with 8 steps per second. The table below shows the control range and step
size for the audio control functions.
Function
Step size
TEA6320,6322/
TEA6321,6323
Range
Volume
variable
mute, -61 dB, -53 dB, -47 dB, -43 dB, -39 dB, -37 dB
-35 dB, -33 dB, -31 dB, -30 dB, -29 dB, .. +19dB, +20 dB
Bass
1.5 dB/
1.8 dB
-15 dB to +15 dB /
-18 dB to +18 dB
Treble
1.5 dB
-12 dB to +12 dB
Balance
variable
rigth: mute, -30 dB, -22, -16, -12, -8, -6, -4, -2, 0 dB
left: 0 dB, -2, -4, -6, -8, -12, -16, -22, -30 dB, mute
Fader
variable
front: mute, -30 dB, -22, -16, -12, -8, -6, -4, -2, 0 dB
rear: 0 dB, -2, -4, -6, -8, -12, -16, -20, -30 dB, mute
The volume setting is not shown on the display. Other functions are shown on the display(e.g. BASS +6).
6.4.3
The LOUD key / RESET function
Loudness is switched on/off by pressing the LOUD key short. When loudness is on, bass and treble are
added to the audio signal, depending on the volume level. The loudness function is carried out by the
TEA632x. If no TEA632x is installed the loudness function is carried out by external loudness circuitry
controlled by the LOUDN pin. The loudness on off status is displayed via an icon. When the loudness key
is pressed for 4 seconds (until the radio bleeps), the reset function is executed. This function sets bass,
64
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
treble, balance and fader to mid-range and will switch loudness off. The display shows the text "RESET"
for 2 seconds.
6.4.4
The MUTE key
When the mute key is pressed, all audio output is suppressed, and the display will show the text
"MUTE". Any keypress will cancel the mute state. The audio control settings are not altered. When TA
mode is on and a traffic announcement or a PTY alarm message is broadcast, the mute state is
temporarily suspended.
6.4.5
Phone mute
When pin Aumute is pulled to ground externally by a connected car phone, the car radio sound is muted
and the display will show "PHONE".
6.4.6
Power amplifier diagnostics control
CCR612 can be equipped with power amplifiers with a diagnostics interface. This interface consists of one
pin which is low at erroneous situations. CCR612S will continuously monitor this pin and can detect one
of the following situations:
Clipping
- The bass and or volume level will be decreased depending on the amount of clipping.
- While clipping is detected and clipping control is active the clipping icon is on.
Too high temperature / short circuit
- CCR612 will display the error message "ERROR" on the LCD.
6.4.7
User programmable options
Some options can be programmed by the user. The options are stored in NVM, and remain in effect until
reprogrammed by the user. The options are:
2 SPKRS / 4 SPKRS
Indicates how many loudspeakers are connected to the radio. If "2 speakers" is selected, the fader
function is not available, and fader setting is always mid-range.
LOUD ON / LOUD OFF
If no loudness key is installed, loudness can be switched on/off using this option in case the loudness
function is available.
TA LVL -2 / -1 / 0 / + 1 / + 2
The volume level during a Traffic Announcement or PTY Alarm can be set to one of 5 fixed values
varying from -12 dB to -4 dB in steps of 2 dB. When this function is selected during Traffic
Announcement or PTY Alarm the volume level will change to the level selected.
65
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Figure 16 explains how user options can be programmed.
S ELECT
> 4 s e c on d s
BA ND
2 SPKRS / 4 SPKRS
LOUD ON / LOUD OFF
TA LVL
F R EQ U P F R E Q D O W N
S E LE CT
6 sec
timeout
EXIT
Figure 16 Programming user options
6.5
RDS / RBDS functions
The RDS / RBDS functions are available only if the radio is tuned to an FM band.
6.5.1
AF follow mode
The AF follow mode mechanism is switched on/off by pressing the AF key short. When AF follow mode
is on, the AF icon is switched on. If no RDS data is received, the AF icon blinks.
In AF follow mode, the radio measures at regular intervals, (interval time depends on the signal quality),
the signal level at frequencies that are mentioned in the list of alternative frequencies (AF’s) for the current
station. For these measurements, the reception of the current station is interrupted for a very short period
(appr. 7 milliseconds), and it is hardly noticeable. If an alternative frequency is stronger than the current
station for a few seconds (depending on the signal quality), the radio switches to that alternative frequency.
It switches also if the quality of the current station becomes suddenly very poor, or if its RDS data cannot
be received. The quality of a station is a function of signal level as well as multipath condition.
The AF follow mechanism is always active when AF follow mode is on, even when the radio is muted or
is in CD-changer or cassette or external mode.
When the user starts a tuning action (band, preset, FREQ-UP / FREQ-DOWN), or when the radio is
switched off, the new frequency and the AF list are stored in NVM. These will be used later on when
selecting the preset again.
66
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
6.5.2
Application Note
96029
PTY functions
CCR612 offers the user the possibility to search for a station with a certain user selected PTY code. When
key PTY is pressed, the currently received PTY code is displayed. If no PTY code is received the display
will show "NO PTY" . By pressing the key FREQ-UP or FREQ-DOWN, the user can select the PTY code
of his choice. When key PTY is pressed for 2 seconds (while the radio is in the PTY selecting mode), the
radio will start a PTY search for the selected PTY code. Figure 17 shows how to select a programme type.
Only one programme type can be selected.
PTY
RDS RBDS
FREQ UP FREQ DOWN
PTY > 2 sec.
St art PTY S can in u p direc t ion
NEWS
AFF AIRS
INFO
SPORT
EDUCATE
DRAMA
CULT URE
SCIENCE
VARIED
POP M
ROCK M
M. O. R . M
L IGHT M
CL AS S I C
OTHER M
ALARM
6 S ec t im eo ut o r
o t h er k ey ,
c an ce l PTY s el ec t
mode
NEW S
I N F OR M
SPORTS
TALK
R OC K
C LS R OC K
A DL T HI T
S OF T RC K
T OP 4 0
C OU N T R Y
OL DI E S
SOFT
N OS TA L GA
JAZZ
C LA S S IC L
R & B
S OF T R& B
L A N GU A GE
R EL MU SI C
R EL T AL K
P E R SN L T Y
P U BL I C
TE ST
A LE RT !
Figure 17 Selecting the PTY code
PTY codes "ALARM" / "TEST" / "ALERT!" can not be selected. The radio will respond to a PTY alarm
message in the same way as a TA traffic announcement, independent of TA mode. For the USA
application the RBDS PTY table is used.
During a PTY search the PTY icon blinks. When the radio receives a PTY code, the PTY icon is on.
When TA mode is on during a PTY search, the radio will first try to find a station which is a traffic station
with the correct PTY code. When no such station can be found (even not in Dx mode), the radio will drop
67
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
the TA requirement and search only for a station with the correct PTY code. If still no station can be found,
the radio will return to its original tuned frequency.
6.5.3
Traffic announcements
Traffic announcements have a special meaning only when TA mode is on.
To switch TA mode on/off, press the TA key. When TA mode is on, the TA icon is on. If the current station
is not a traffic station, the TP icon blinks, and a warning bleep is generated every 30 seconds.
If TA mode is on, the next happens when a traffic announcement is broadcast:
1. If the traffic announcement is detected via EON, the radio will switch to the linked programme service
transmitting the traffic announcement. The radio will stay at least 4 seconds on this programme
before switching back to the original programme to give the broadcaster time to synchronise the RDS
TP and TA data over its network.
AF follow mode is disabled during an EON traffic announcement.
2. If the radio is in CD-changer, cassette mode or in external mode, it switches temporarily to radio
mode, and the display will show the programme service name of the received station.
3. If the radio is muted, it is temporarily de-muted, and the "MUTE" message is removed from the
display.
4. If the volume was low, it is raised to the TA volume level as installed under the user options (see:
user programmable options). Also, the TA output pin is made low.
5. The TA icon blinks. In case of a traffic announcement on an EON linked station, the EON icon will
also blink.
At the end of the traffic announcement, the old situation is restored again (after an EON traffic
announcement the radio will switch back to the original station). If the user has not changed the volume
setting, it is restored to the value before the traffic announcement. If the volume level was changed, the
new value will be retained.
The current traffic announcement can be cancelled by pressing the TA key, the TA mode remains on.
6.5.4
PTY alarm broadcasts
A PTY alarm message is treated the same way as a traffic announcement. A PTY alarm message will
break-in, even when TA mode is off.
68
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
7
Application Note
96029
RDS / RBDS FACILITIES.
As soon as the radio is steadily tuned to an FM station, it will start collecting RDS information. The next
items are extracted from the stream of RDS data:
-
PI
PS
PTY
TP
TA
AF
EON
Programme Identification code;
Programme Service name;
Programme TYpe code;
Traffic Programme bit;
Traffic Announcement bit;
Alternative Frequency list;
Enhanced Other Network information.
Most data is validated, e.g. the same data must be received twice before it is accepted as a new value.
7.1
Programme Identification code
The PI code is invisible for the user. It is used to check whether the correct station is received after a
preset is selected, or when the AF follow mechanism switches to an alternative frequency.
When a station is stored in NVM, also its PI code is stored. When the same preset is selected again, the
radio verifies the PI code. If the PI code is not correct, and AF follow mode is on, the radio will search for
a station with the right PI code, first by scanning all available alternative frequencies, then if after a timeout
of 6 seconds the PI code is still not correct, a search tuning operation is started.
During AST Search, the PI code is used to avoid that the same programme is stored at different presets,
when it can be received on more than one frequency. For USA application (RBDS) the regional function
will only work for PI codes above B000hex. PI codes below B000hex do not have regional variants. AF
switching is only allowed to stations with exactly the same PI code.
7.2
Programme Service name
By default, the radio will display the received Programme Service name as soon as it is available. The PS
name is stored in the preset memory locations. The name is then immediately displayed when a preset
station is selected.
Tuning frequency instead of PS name is displayed when the radio is in manual tuning mode. Also, by
means of the display key, the radio can be forced to display PTY code, frequency and PS name
respectively.
7.3
Programme TYpe
PTY is a code for the kind of programme that is broadcast. Figure 17 shows the names of PTY codes that
are defined for RDS. CCR612 can display the PTY currently received, and it can search for a station with
a specific PTY code. The user can select a PTY code and start a scan for a station transmitting this PTY
code.
69
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
7.4
Application Note
96029
Traffic Announcements
RDS data contains two bits called TP (Traffic Programme) and TA (Traffic Announcement), see the table
below for the meaning of these bits.
TP
TA
Meaning
0
0
No announcements, no traffic station
0
1
Traffic announcements indirect via at least one EON
referenced station, (traffic station)
1
0
Traffic announcements on this station, (traffic
station)
1
1
Traffic announcement on this station now
The radio will start a search for a traffic station when the TA mode is switched on when the current station
is not a traffic station.
If TA mode is on, and the current station is not a traffic station, the TP icon will blink, and a warning bleep
is generated every 30 seconds.
If a traffic announcement is received while TA mode is on, and the radio is in CD-changer, cassette mode,
external mode or muted, this mode is temporarily overruled and the traffic announcement is passed on.
If the volume setting was very low, it is temporarily raised to get the user’s attention.
If a traffic announcement is received via EON (RDS group 14B is received indicating the PI code of the
other station transmitting the traffic announcement), the radio will check its internal pool store and will try
to switch over to the other station transmitting the traffic announcement. The radio will stay on this other
station for at least 4 seconds to give the broadcaster time to synchronise the RDS TP and TA data over
its network.
By pressing the TA key the current traffic announcement will be cancelled but the radio remains in TA
mode.
If during a traffic announcement the signal quality becomes too weak resulting in the fact that RDS
reception is lost, CCR612 will cancel the traffic announcement after a timeout of 2 minutes.
7.5
Alternative Frequency following
The radio will always assemble a list of alternative frequencies from the received RDS data, even when
AF follow mode is off. When the current frequency is left (by tuning, band switching or by turning the radio
off), the alternative frequency list is stored in NVM if it is different from the previous stored list.
70
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
When AF follow mode is on, the next actions are taken:
1. When selecting a preset, the radio will load the AF list from NVM, and measure the signal strength
of the primary frequency and all alternative frequencies. It will then select the strongest station with
the correct PI code, before the radio is de-muted.
(PI codes are compared with the value stored in the preset data in NVM.)
If no station with the correct PI code is found, after 6 seconds the radio will start a search tuning for
a station with the correct PI code. If still not found, it will accept the new station, but it will not update
the PI code stored in NVM.
Search tuning can be cancelled by switching AF follow mode off or by pressing the AUTO / MANUAL
key. The radio will then return to the original frequency.
2. At regular intervals - depending on the signal strength of the current station - the signal strength of
alternative frequencies is measured. The interval varies from appr. 80 seconds when the signal level
of the current station is very strong to appr. 3 seconds when it is very weak.
3. When for a certain time an AF is stronger than the current frequency, or when the current frequency
becomes suddenly unacceptable e.g. due to multipath, the radio switches to the best alternative
frequency.
When the programme service is left (by tuning, band switching or by turning the radio off), the new
frequency is stored in NVM as the primary frequency for that preset.
The AF follow algorithm has provisions for special circumstances such as:
- Mountains and buildings. All signal strengths vary rapidly due to multipath distortion. Switch when
the multipath distortion level becomes unacceptable.
- Loss of RDS data or station changes PI code. Select an alternative frequency with correct PI
code.
The "quality" of a station is a value that is based on signal level as well as multipath level read from
the TEA6822 by means of the I2C-bus.
7.6
EON preset update
When the tuned station transmits EON information, the alternative frequencies stored for the station
presets are updated via EON. Only those alternative frequency lists of station presets can be updated
whose PI codes match one of the PI codes transmitted via EON. Whether or not regional variants of the
PI code are taken into account depends on the status of the regional selection. If the regional selection
is switched on, the transmitted PI code must exactly match the PI code to update.
If after travelling any distance while tuned to a programme service, a user selects a preset for another
station which is cross-referenced by EON-information, CCR612 has to find an acceptable frequency for
the new selected station in the new area, without resorting to a PI search. This should occur regardless
of the distance travelled, assuming of course that the station is transmitted in the new area.
71
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
APPENDIX I NVM layout and initialisation
Words (16 bits) are stored with the most significant byte first (in lowest address).
Ordering of the bits in a byte or word:
Bit 0 is the least significant (rightmost) bit
Bit 7 is the most significant (leftmost) bit of a byte
Bit 15 is the most significant (leftmost) bit of a word
Layout of NVM
sub
address
function
meaning / encoding
00
Checksum
Checksum of two NVM check code bytes:
NVM check code byte(0) + NVM check code byte(1) + 2
01
Volume
00H = mute, 01H = -61 dB
02
Bass
00H = -15 dB
00H = -18 dB
03
Treble
00H = -12 dB
08H = mid-range
10H = +12 dB
04
Balance
00H = right muted
01H = right -30 dB
09H = mid range
11H = left -30 dB
12h = left muted
05
Fader
00H = front muted
01H = front -30 dB
09H = mid range
11H = rear -30 dB
12H = rear muted
06
system status
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
0 = radio mode
0 = not cassette mode
0 = external plug in
0 = tape in drive
0 = Dolby off
0 = AMS off
0 = Me/Cr off
0 , not used
1 = external mode
1 = cassette mode
1 = external plug not in
1 = tape not in drive
1 = Dolby on
1 = AMS on
1 = Me/Cr on
07
system status
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
0 = loudness off
0 = 2-speakers
0, not used
0 = TA mode off
0 = Regional mode off
0 = PTY mode off
0 = no CD-changer
0 = no External source
1 = loudness on
1 = 4-speakers
3CH = +20 dB
0AH = mid-range
0AH = mid-range
72
14H = +15 dB(6320/2)
14H = +18 dB(6321/3)
1 = TA mode on
1 = Regional mode on
1 = PTY mode on
1 = CD-changer mode
1 = External source mode
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Layout of NVM
sub
address
08
function
meaning / encoding
system status
bit 0/1/2
Band
000 = FM1
001 = FM2
010 = FM-AST
011 = MW
100 = MW-AST
101 = LW
110 = SW
bit 3
0 = NV PS name is not ok 1 = NV PS name is ok
bit 4,5,6 TA volume level 6 5 4
- 8 dB 0 0 0
- 6 dB 0 0 1
- 4 dB 0 1 0
-12 dB 0 1 1
-10 dB 1 0 0
7 Unused
09 - 0A
NVM check code
BCD encoded (1 nibble per digit). Most significant digit in leftmost
position
0B - 0E
presets
0B
0C
0D
0E
high nibble FM1
high nibble FM-AST
high nibble MW-AST
SW
low nibble FM2
low nibble MW
low nibble LW
Each nibble: 1-6 last used preset
0
not in preset mode
0F - 38
PI codes
0F - 1C FM-1
1D - 2A FM-2
2B - 38
FM-AST
For each band: 00,01
02,03
........
0C,0D
73
PI code for manual/search tuned
frequency
PI code for preset-1
PI code for preset-6
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Layout of NVM
sub
address
function
meaning / encoding
39 - F5
AF lists
39 - 77 FM-1
78 - B6 FM-2
B7 - F5 FM-AST
For each band: 00 - 08
09 - 11
.........
36 - 3E
F6 - 157
Preset
Frequencies
0F6 - 103 FM-1
104 - 111 FM-2
112 - 11F FM-AST
120 - 12D MW
12E - 13B MW-AST
13C - 149 LW
14A - 157 SW
For each band: 00,01
02,03
........
0C,0D
AF list for manual/search tuned
frequency
AF list for preset-1
AF list for preset-6
manual/search tuned frequency
frequency for preset-1
frequency for preset-6
Encoding of frequency:
FM:
freq = (<value> * 50 kHz) + 87.5 MHz
bit 15 of each frequency word contains follow mode bit
MW: freq = (<value> * 1 kHz) + 522 kHz
LW:
freq = (<value> * 1 kHz) + 144 kHz
SW:
freq = (<value> * 1 kHz) + 5.9 MHz
158 - 1FF
PS names
158 - 18F FM-1
190 - 1C7 FM-2
1C8 - 1FF FM-AST
For each band: 00..07
08..0F
.......
30..37
74
PS name for manual/search tuned
frequency
PS name for preset-1
PS name for preset-6
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
NVM initialisation values
sub address
function
meaning / encoding
00
Checksum
02H, Checksum ( 0 + 0 + 2 )
01
Volume
1DH, Maximal switch on volume
02
Bass
0AH = mid-range
03
Treble
08H = mid-range
04
Balance
09H = mid-range
05
Fader
09H = mid-range
06
system status
0CH
bit 0,1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
0 = radio mode
1 = external plug not in
1 = tape not in drive
0 = Dolby off
0 = AMS off
0 = Me/Cr off
0 ,not used
00H
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
0 = loudness off
0 = 2-speakers
0 , not used
0 = TA mode off
0 = Regional mode off
0 = PTY mode off
0 = no CD-changer mode
0 = no external plug mode
07
08
system status
system status
00H
bit 0/1/2
bit 3
bit 4/5/6
Band
000 = FM1
1 = NV PS name is ok
TA level -8dB = 000
09 - 0A
security code
00H, 00H, Set to ’0000’
0B - 0E
presets
00H, for each band and preset nr 0 is selected
0F - 38
PI codes
00H, for each band and preset PI code is 0000
39 - F5
AF lists
00H, for each band and preset AF list is filled with 00
75
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
NVM initialisation values
sub address
function
meaning / encoding
F6 - 157
Preset
Frequencies
00H
for each band and preset Frequency is 0000
FM = 87.5 MHz
MW = 522 KHz
LW = 144 KHz
SW = 5.9 MHz
158 - 1FF
PS names
00H, for each band and preset PS Name is 00 (No PS Name)
76
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
APPENDIX II Segment addresses for 143 segment display
Segment addresses for the used (143) segments. Note that BP0 and BP3 are swapped.
PCF8576 pin
Segment line
BP3
BP1
BP2
BP0
LCD pin
Segment line
BP0
BP1
BP2
BP3
1
S0
.
.
REG
EON
2
S1
1E
1I
1F
1P
3
S2
1C
1B
1L
AST
4
S3
.
2E
2F
SCAN
5
S4
2N
2J
2L
LOC
6
S5
.
2C
2B
AF
7
S6
3E
3I
3F
3P
8
S7
3C
3B
3L
TP
9
S8
.
4E
4F
.
10
S9
4N
4J
4L
ST
11
S10
.
4C
4B
.
12
S11
5E
5I
5F
5P
13
S12
5C
5B
5L
TA
14
S13
.
6E
6F
PTY
15
S14
6N
6J
6L
.
16
S15
6C
DP(= P2)
6B
.
17
S16
7N
7J
7B
.
18
S17
.
7C
8F
.
19
S18
8E
8I
8K
8P
20
S19
.
8C
8B
.
21
S20
9C
9G
9B
LOUD
22
S21
CLIP
AMS
MTL
[)(]
23
S22
9D
9E
9F
9A
24
S23
8D
8N
8J
8L
25
S24
8M
8H
8G
8A
26
S25
7D
7H
7L
7G
27
S26
7M
7I
7K
7A
77
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
PCF8576 pin
Segment line
BP3
BP1
BP2
BP0
LCD pin
Segment line
BP0
BP1
BP2
BP3
28
S27
7E
7F
.
7P
29
S28
6D
6H
6G
6A
30
S29
6M
6I
6K
6P
31
S30
5D
5N
5J
5G
32
S31
5M
5H
5K
5A
33
S32
4D
4H
4G
4A
34
S33
4M
4I
4K
4P
35
S34
3D
3N
3J
3G
36
S35
3M
3H
3K
3A
37
S36
2D
2H
2G
2A
38
S37
2M
2I
2K
2P
39
S38
1D
1N
1J
1G
40
S39
1M
1H
1K
1A
41
BP0
42
BP1
43
BP2
44
BP3
78
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
APPENDIX III LCD Display Character Set.
20
21
22
23
24
25
26
27
90
91
92
93
94
95
96
97
28
29
2A
2B
2C
2D
2E
2F
98
99
9A
9B
9C
9D
9E
9F
30
31
32
33
34
35
36
37
A0
A1
A2
A3
A4
A5
A6
A7
38
39
3A
3B
3C
3D
3E
3F
A8
A9
AA
AB
AC
AD
AE
AF
40
41
42
43
44
45
46
47
B0
B1
B2
B3
B4
B5
B6
B7
48
49
4A
4B
4C
4D
4E
4F
B8
B9
BA
BB
BC
BD
BE
BF
50
51
52
53
54
55
56
57
C0
C1
C2
C3
C4
C5
C6
C7
58
59
5A
5B
5C
5D
5E
5F
C8
C9
CA
CB
CC
CD
CE
CF
60
61
62
63
64
65
66
67
D0
D1
D2
D3
D4
D5
D6
D7
68
69
6A
6B
6C
6D
6E
6F
D8
D9
DA
DB
DC
DD
DE
DF
70
71
72
73
74
75
76
77
E0
E1
E2
E3
E4
E5
E6
E7
78
79
7A
7B
7C
7D
7E
7F
E8
E9
EA
EB
EC
ED
EE
EF
80
81
82
83
84
85
86
87
F0
F1
F2
F3
F4
F5
F6
F7
88
89
8A
8B
8C
8D
8E
8F
F8
F9
FA
FB
FC
FD
FE
FF
Figure 18 LCD Character Set
79
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
APPENDIX IV CIRCUIT DIAGRAMS
80
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 1A
81
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 1B
82
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 1C
83
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 2A
84
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 2B
85
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for MAIN BOARD PART 3
86
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for FRONT BOARD PART FP-1A
87
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for FRONT BOARD PART FP-1B
88
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for ICE MODULE EURO 1
89
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for CCR612 mainboard pcb top
90
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for CCR612 mainboard pcb bottom
91
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for ICE module pcb
92
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for front panel top
93
Application Note
96029
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
dummy page for SUB BOARD PACS
94
Application Note
96029