ARM-based Embedded MPU SAM9N12 SAM9CN11 SAM9CN12 SUMMARY DATASHEET Description Based on the ARM926EJ-S™ processor, the Atmel® SAM9N12/CN11/CN12 devices offer the frequently-requested combination of user interface functionality and high data rate connectivity, with LCD Controller, resistive touch-screen, multiple UARTs, SPI, I2C, full-speed USB Host and Device and SDIO. The SAM9N12/CN11/CN12 support the latest generation of LPDDR/DDR2 and NAND Flash memory interfaces for program and data storage. An internal 133 MHz multilayer bus architecture associated with eight DMA channels and distributed memory – including a 32-Kbyte SRAM – sustains the high bandwidth required by the processor and the high-speed peripherals. The SAM9CN12/CN11 offers on-chip hardware accelerators with DMA support that enable high-speed data encryption and authentication of transferred data or applications. Supported standards are up to 256-bit AES, and FIPS Publication 180-2 compliant SHA1 and SHA256. A True Random Number Generator is embedded for key generation and exchange protocols. The devices also feature fuse bits for crypto key (SAM9CN12), user configuration (SAM9N12 and SAM9CN11) and device configuration (all). The SAM9CN12 includes a secured Boot ROM; the SAM9N12 and SAM9CN11 include a standard Boot ROM. The I/Os support 1.8V or 3.3V operation and are independently configurable for the memory interface and peripheral I/Os. This feature eliminates the need for any external level shifters, while 0.8 ball pitch packages lower PCB cost and complexity. The SAM9N12/CN11/CN12 power management controllers feature efficient clock gating and a battery backup section that minimizes power consumption in active and standby modes. There are several devices. The table that follows presents the embedded features of each device. Device SAM9N12 SAM9CN11 SAM9CN12 Standard Boot with BSC X X – Secured Boot – – X TRNG X X X AES – X X SHA – X X This is a summary document. The complete document is available on the Atmel website at www.atmel.com. 11063HS–ATARM–27-Sep-13 1. Features Core ARM926EJ-S™ ARM® Thumb® Processor running up to 400 MHz 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories One 128-Kbyte internal ROM embedding standard or secure bootstrap routine. One 32-Kbyte internal SRAM, single-cycle access at system speed 32-bit External Bus Interface supporting 8-bank DDR2/LPDDR, SDR/LPSDR, Static Memories MLC/SLC NAND Controller, with up to 24-bit Programmable Multi-bit Error Correcting Code (PMECC) System running up to 133 MHz Power-on Reset, Reset Controller, Shut Down Controller, Periodic Interval Timer, Watchdog Timer and Real Time Clock Boot Mode Select Option, Remap Command Internal Low Power 32 kHz RC and Fast 12 MHz RC Oscillators Selectable 32768 Hz Low-power Oscillator, 16 MHz Oscillator, one PLL for the system and one PLL optimized for USB Six 32-bit-layer AHB Bus Matrix Dual Peripheral Bridge with dedicated programmable clock One dual port 8-channel DMA Controller Advanced Interrupt Controller and Debug Unit Two Programmable External Clock Signals Low-power Mode Shut Down Controller with four 32-bit battery backup registers Clock Generator and Power Management Controller Very Slow Clock Operating Mode, Software Programmable Power Optimization Capabilities Peripherals LCD Controller USB Device Full Speed with dedicated On-Chip Transceiver USB Host Full Speed with dedicated On-Chip Transceiver One High speed SD card and SDIO Host Controller Two Master/Slave Serial Peripheral Interfaces Two Three-channel 32-bit Timer/Counters One Synchronous Serial Controller One Four-channel 16-bit PWM Controller Two Two-wire Interfaces Four USARTs, two UARTs, one DBGU One 12-channel 10-bit Analog-to-Digital Converter with up to 5-wire resistive Touch screen support Safety Crystal Failure Detection Independent Watchdog Power-on Reset Cells Write Protection Registers SHA (SHA1 and SHA256) Compliant with FIPS Publication 180-2, see the device configuration table in “Description” SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 2 Cryptography TRNG True Random Number Generator compliant with NIST Special Publication 800-22 AES 256-, 192-, 128-bit Key Algorithm compliant with FIPS Publication 197 (except for SAM9N12) 256 Fuse bits for crypto key and 64 Fuse bits for device configuration, including JTAG disable and forced boot from the on-chip ROM I/O Four 32-bit Parallel Input/Output Controllers 105 Programmable I/O Lines Multiplexed with up to Three Peripheral I/Os Input Change Interrupt Capability on Each I/O Line, optional Schmitt Trigger input Individually Programmable Open-drain, Pull-up and Pull-down Resistor, Synchronous Output Packages 217-ball BGA, pitch 0.8 mm 247-ball BGA, pitch 0.5 mm SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 3 2. Block Diagram System Controller AIC D0-D15 A0/NBS0 A1/NBS2/NWR2/DQM2 A2-A15, A19 A16/BA0 A17/BA1 A18/BA2 NCS0 NCS1/SDCS NRD NWR0/NWE NWR1/NBS1 NWR3/NBS3/DQM3 SDCK, #SDCK, SDCKE RAS, CAS SDWE, SDA10 DQM[0..1] DQS[0..1] In-Circuit Emulator EBI PIO PLLB USB FS OHCI ARM926EJ-S DBGU PLLA MMU DCache 16 Kbytes I 8-CH DMA DDR2/LPDDR SDR/LPSDR Controller DMA DMA Bus Interface PMC LCD D OSC16M 12M RC PIT ROM 128 Kbytes Static Memory Controller WDT 4 GPBR Multi-Layer AHB Matrix RC SHDC RTC VDDBU NRST POR RSTC VDDCORE POR PIO OSC 32K * except SAM9N12 PIOA PIOD PIOB PIOC DMA AES * DMA SHA * Peripheral Bridge SRAM 32 Kbytes Peripheral Bridge NAND Flash Controller PMECC PMERRLOC TRNG NWAIT A20-A25 D16-D31 NCS2, NCS3, NCS4, NCS5 NANDOE, NANDWE NANDALE, NANDCLE NANDCS APB DMA SPI0 SPI1 DMA SSC FIFO DMA HSMCI0 SD/SDIO DMA TWI0 TWI1 DMA PWM USART0 USART1 USART2 USART3 DMA UART0 UART1 TC0 TC1 TC2 TC3 TC4 TC5 DMA 12-CH 10-bit ADC TouchScreen NP NPCS C 3 NP S2 NPCS C 1 SP S0 M CK O M SI IS O TK TF TD M CI RD 0_ DA RF 0M RK CI 0_ M CI DA3 0_ M CD CI A 0_ CK TW TW D CK 0-T 0- WD TW 1 CK PW 1 M 0PW M 3 CT S0 RT -3 S SC 03 RDK0X0 3 T XD -3 UR 0D 3 UT X0U XD R 0- DX TC UTX 1 D1 L TI K0 O TI A0 TCL O -T K B0 IO 5 - A TS TIO 5 AD B5 T AD RIG ADOU L AD1U R AD 2LL G PA 3 D5 AD LR TS -G 4P AD PA I V D1 VD RE 1 D F G AN F ND A AN A PIO DPRAM USB FS Device Transceiver DD DD M P XIN32 XOUT32 SHDN WKUP PIO Transceiver ICache 16 Kbytes XIN XOUT LC D LC DAT 0 D LC VSY -LCD D N LD PC C,L DAT D K C D 23 LC EN, HS DD LC YN IS D P C P W M JTAG / Boundary Scan Fuse Box PCK0-PCK1 FIQ IRQ DRXD DTXD HD P HD M NT RS T TD I TD TMO TCS K RT CK JT AG SE L BM S Figure 2-1. SAM9N12/CN11/CN12 Block Diagram SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 4 3. Signal Description Table 3-1 gives details on the signal names classified by peripheral. Table 3-1. Signal Description List Signal Name Function Type Active Level Clocks, Oscillators and PLLs XIN Main Oscillator Input Input XOUT Main Oscillator Output Output XIN32 Slow Clock Oscillator Input Input XOUT32 Slow Clock Oscillator Output Output PCK0 - PCK1 Programmable Clock Output Output Shutdown, Wakeup Logic SHDN Shut-Down Control Output WKUP Wake-Up Input Input ICE and JTAG TCK Test Clock Input TDI Test Data In Input TDO Test Data Out Output TMS Test Mode Select Input JTAGSEL JTAG Selection Input RTCK Return Test Clock Output Reset/Test NRST Microcontroller Reset I/O NTRST Test Reset Signal Input BMS Boot Mode Select Input Low Debug Unit - DBGU DRXD Debug Receive Data Input DTXD Debug Transmit Data Output Advanced Interrupt Controller - AIC IRQ External Interrupt Input Input FIQ Fast Interrupt Input Input PIO Controller - PIOA - PIOB - PIOC - PIOD PA0 - PA31 Parallel IO Controller A I/O PB0 - PB18 Parallel IO Controller B I/O PC0 - PC31 Parallel IO Controller C I/O PD0 - PD21 Parallel IO Controller D I/O SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 5 Table 3-1. Signal Description List (Continued) Signal Name Function Type Active Level External Bus Interface - EBI D0 -D15 Data Bus I/O D16 -D31 Data Bus I/O A0 - A25 Address Bus Output NWAIT External Wait Signal Input Low Static Memory Controller - SMC NCS0 - NCS5 Chip Select Lines Output Low NWR0 - NWR3 Write Signal Output Low NRD Read Signal Output Low NWE Write Enable Output Low NBS0 - NBS3 Byte Mask Signal Output Low NAND Flash Support NFD0-NFD15 NAND Flash I/O I/O NANDCS NAND Flash Chip Select Output Low NANDOE NAND Flash Output Enable Output Low NANDWE NAND Flash Write Enable Output Low DDR2/SDRAM/LPDDR Controller SDCK,#SDCK DDR2/SDRAM differential clock Output SDCKE DDR2/SDRAM Clock Enable Output High SDCS DDR2/SDRAM Controller Chip Select Output Low BA[0..2] Bank Select Output Low SDWE DDR2/SDRAM Write Enable Output Low RAS - CAS Row and Column Signal Output Low SDA10 SDRAM Address 10 Line Output DQS[0..1] Data Strobe I/O DQM[0..3] Write Data Mask Output High Speed Multimedia Card Interface - HSMCI MCI_CK Multimedia Card Clock I/O MCI_CDA Multimedia Card Slot Command I/O MCI_DA0 MCI_DA7 Multimedia Card Slot Data I/O Universal Synchronous Asynchronous Receiver Transmitter- USARTx SCKx USARTx Serial Clock I/O TXDx USARTx Transmit Data Output RXDx USARTx Receive Data Input RTSx USARTx Request To Send Output CTSx USARTx Clear To Send Input SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 6 Table 3-1. Signal Description List (Continued) Signal Name Function Type Active Level Universal Asynchronous Receiver Transmitter - UARTx UTXDx UARTx Transmit Data Output URXDx UARTx Receive Data Input Synchronous Serial Controller - SSC TD SSC Transmit Data Output RD SSC Receive Data Input TK SSC Transmit Clock I/O RK SSC Receive Clock I/O TF SSC Transmit Frame Sync I/O RF SSC Receive Frame Sync I/O Timer Counter - TCx x=0..5 TCLKx TC Channel x External Clock Input Input TIOAx TC Channel x I/O Line A I/O TIOBx TC Channel x I/O Line B I/O Serial Peripheral Interface - SPIx SPIx_MISO Master In Slave Out I/O SPIx_MOSI Master Out Slave In I/O SPIx_SPCK SPI Serial Clock I/O SPIx_NPCS0 SPI Peripheral Chip Select 0 I/O Low SPIx_NPCS1SPIx_NPCS3 SPI Peripheral Chip Select Output Low Two-wire Interface -TWIx TWDx Two-wire Serial Data I/O TWCKx Two-wire Serial Clock I/O Pulse Width Modulation Controller- PWM PWM0 - PWM3 Pulse Width Modulation Output Output USB Device Full Speed Port - UDP DDP USB Device Data + Analog DDM USB Device Data - Analog USB Host Full Speed Port - UHP HDP USB Host Data + Analog HDM USB Host Data - Analog LCD Controller - LCDC LCDDAT 0-23 LCD Data Bus Output LCDVSYNC LCD Vertical Synchronization Output LCDHSYNC LCD Horizontal Synchronization Output LCDPCK LCD Pixel Clock Output SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 7 Table 3-1. Signal Description List (Continued) Signal Name Function Type LCDDEN LCD Data Enable Output LCDPWM LCD Contrast Control Output LCDDISP LCD Display Enable Output Active Level Analog-to-Digital Converter - ADC AD0XP_UL Top/Upper Left Channel Analog AD1XM_UR Bottom/Upper Right Channel Analog AD2YP_LL Right/Lower Left Channel Analog AD3YM_SENSE Left/Sense Channel Analog AD4LR Lower Right Channel Analog AD5-AD11 7 Analog Inputs Analog ADTRG ADC Trigger Input ADVREF ADC Reference Analog When “Reset State” is stated, the configuration is defined by the “Reset State” column of the Pin Description table. SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 8 4. Package and Pinout The SAM9CN12 is available in 217-ball and 247-ball BGA packages. 4.1 Mechanical Overview of the 217-ball BGA Package Figure 4-1 shows the orientation of the 217-ball BGA Package Figure 4-1. Orientation of the 217-ball BGA Package TOP VIEW 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H J K L M N P R T U BALL A1 SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 9 4.2 Mechanical Overview of the 247-ball BGA Package Figure 4-2 shows the orientation of the 247-ball BGA Package Figure 4-2. Orientation of the 247-ball BGA Package BOTTOM VIEW BALL A1 SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 10 4.3 217-ball BGA Package Pinout Table 4-1. BGA217 Pin Description Primary Alternate Ball Power Rail I/O Type Signal Dir Signal Dir PIO Peripheral A PIO Peripheral B Signal Dir Signal PIO Peripheral C Dir Signal Dir Reset State Signal, Dir, PU, PD, ST T3 VDDIOP0 GPIO PA0 I/O TXD0 O SPI1_NPCS1 O PIO, I, PU, ST U2 VDDIOP0 GPIO PA1 I/O RXD0 I SPI0_NPCS2 O PIO, I, PU, ST U3 VDDIOP0 GPIO PA2 I/O RTS0 O PIO, I, PU, ST P4 VDDIOP0 GPIO PA3 I/O CTS0 I PIO, I, PU, ST T4 VDDIOP0 GPIO PA4 I/O SCK0 I/O PIO, I, PU, ST U4 VDDIOP0 GPIO PA5 I/O TXD1 O PIO, I, PU, ST P5 VDDIOP0 GPIO PA6 I/O RXD1 I PIO, I, PU, ST R4 VDDIOP0 GPIO PA7 I/O TXD2 O SPI0_NPCS1 O PIO, I, PU, ST U6 VDDIOP0 GPIO PA8 I/O RXD2 I SPI1_NPCS0 I/O PIO, I, PU, ST R5 VDDIOP0 GPIO PA9 I/O DRXD I PIO, I, PU, ST R6 VDDIOP0 GPIO PA10 I/O DTXD O PIO, I, PU, ST T5 VDDIOP0 GPIO PA11 I/O SPI0_MISO I/O MCDA4 I/O PIO, I, PU, ST T6 VDDIOP0 GPIO PA12 I/O SPI0_MOSI I/O MCDA5 I/O PIO, I, PU, ST U5 VDDIOP0 GPIO_CLK PA13 I/O SPI0_SPCK I/O MCDA6 I/O PIO, I, PU, ST U7 VDDIOP0 GPIO PA14 I/O SPI0_NPCS0 I/O MCDA7 I/O PIO, I, PU, ST T7 VDDIOP0 GPIO PA15 I/O MCDA0 I/O PIO, I, PU, ST R7 VDDIOP0 GPIO PA16 I/O MCCDA I/O PIO, I, PU, ST U8 VDDIOP0 GPIO_CLK PA17 I/O MCCK I/O PIO, I, PU, ST P8 VDDIOP0 GPIO PA18 I/O MCDA1 I/O PIO, I, PU, ST T8 VDDIOP0 GPIO PA19 I/O MCDA2 I/O PIO, I, PU, ST R8 VDDIOP0 GPIO PA20 I/O MCDA3 I/O U9 VDDIOP0 GPIO PA21 I/O TIOA0 I/O SPI1_MISO I/O PIO, I, PU, ST U10 VDDIOP0 GPIO PA22 I/O TIOA1 I/O SPI1_MOSI I/O PIO, I, PU, ST T9 VDDIOP0 GPIO_CLK PA23 I/O TIOA2 I/O SPI1_SPCK I/O PIO, I, PU, ST U11 VDDIOP0 GPIO PA24 I/O TCLK0 I TK I/O PIO, I, PU, ST T10 VDDIOP0 GPIO PA25 I/O TCLK1 I TF I/O PIO, I, PU, ST R9 VDDIOP0 GPIO PA26 I/O TCLK2 I TD O PIO, I, PU, ST U12 VDDIOP0 GPIO PA27 I/O TIOB0 I/O RD I PIO, I, PU, ST PIO, I, PU, ST T11 VDDIOP0 GPIO PA28 I/O TIOB1 I/O RK I/O PIO, I, PU, ST U13 VDDIOP0 GPIO PA29 I/O TIOB2 I/O RF I/O PIO, I, PU, ST R10 VDDIOP0 GPIO PA30 I/O TWD0 I/O SPI1_NPCS3 O PIO, I, PU, ST T12 VDDIOP0 GPIO PA31 I/O TWCK0 O SPI1_NPCS2 O PIO, I, PU, ST E4 VDDANA GPIO PB0 I/O RTS2 O PIO, I, PU, ST F3 VDDANA GPIO PB1 I/O CTS2 I PIO, I, PU, ST F4 VDDANA GPIO PB2 I/O SCK2 I/O PIO, I, PU, ST F2 VDDANA GPIO PB3 I/O SPI0_NPCS3 O PIO, I, PU, ST G4 VDDANA GPIO_CLK PB4 I/O PIO, I, PU, ST G3 VDDANA GPIO PB5 I/O PIO, I, PU, ST SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 11 Table 4-1. BGA217 Pin Description (Continued) Primary Alternate PIO Peripheral A Signal PIO Peripheral B Dir Signal PIO Peripheral C Dir Signal Dir Reset State Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir Signal Dir D2 VDDANA GPIO_ANA PB6 I/O AD7 I PIO, I, PU, ST E2 VDDANA GPIO_ANA PB7 I/O AD8 I PIO, I, PU, ST D1 VDDANA GPIO_ANA PB8 I/O AD9 I PIO, I, PU, ST F1 VDDANA GPIO_ANA PB9 I/O AD10 I PCK1 O PIO, I, PU, ST E1 VDDANA GPIO_ANA PB10 I/O AD11 I PCK0 O PIO, I, PU, ST A1 VDDANA GPIO_ANA PB11 I/O AD0 I PWM0 O PIO, I, PU, ST C3 VDDANA GPIO_ANA PB12 I/O AD1 I PWM1 O PIO, I, PU, ST B1 VDDANA GPIO_ANA PB13 I/O AD2 I PWM2 O PIO, I, PU, ST C2 VDDANA GPIO_ANA PB14 I/O AD3 I PWM3 O PIO, I, PU, ST D3 VDDANA GPIO_ANA PB15 I/O AD4 I C1 VDDANA GPIO_ANA PB16 I/O AD5 I AD6 I PIO, I, PU, ST I PIO, I, PU, ST I PIO, I, PU, ST I PIO, I, PU, ST E3 VDDANA GPIO_ANA PB17 I/O D4 VDDANA GPIO PB18 I/O IRQ I G2 VDDIOP1 GPIO PC0 I/O LCDDAT0 O TWD1 I/O PIO, I, PU, ST G1 VDDIOP1 GPIO PC1 I/O LCDDAT1 O TWCK1 O PIO, I, PU, ST H4 VDDIOP1 GPIO PC2 I/O LCDDAT2 O TIOA3 I/O PIO, I, PU, ST J1 VDDIOP1 GPIO PC3 I/O LCDDAT3 O TIOB3 I/O PIO, I, PU, ST H3 VDDIOP1 GPIO PC4 I/O LCDDAT4 O TCLK3 I PIO, I, PU, ST J3 VDDIOP1 GPIO PC5 I/O LCDDAT5 O TIOA4 I/O PIO, I, PU, ST H2 VDDIOP1 GPIO PC6 I/O LCDDAT6 O TIOB4 I/O PIO, I, PU, ST H1 VDDIOP1 GPIO PC7 I/O LCDDAT7 O TCLK4 I PIO, I, PU, ST K2 VDDIOP1 GPIO PC8 I/O LCDDAT8 O UTXD0 O PIO, I, PU, ST J2 VDDIOP1 GPIO PC9 I/O LCDDAT9 O URXD0 I PIO, I, PU, ST ADTRG L1 VDDIOP1 GPIO PC10 I/O LCDDAT10 O PWM0 O PIO, I, PU, ST K1 VDDIOP1 GPIO PC11 I/O LCDDAT11 O PWM1 O PIO, I, PU, ST L2 VDDIOP1 GPIO PC12 I/O LCDDAT12 O TIOA5 I/O PIO, I, PU, ST K3 VDDIOP1 GPIO PC13 I/O LCDDAT13 O TIOB5 I/O PIO, I, PU, ST M1 VDDIOP1 GPIO PC14 I/O LCDDAT14 O TCLK5 I PIO, I, PU, ST M2 VDDIOP1 GPIO_CLK PC15 I/O LCDDAT15 O PCK0 O PIO, I, PU, ST K4 VDDIOP1 GPIO PC16 I/O LCDDAT16 O UTXD1 O PIO, I, PU, ST M3 VDDIOP1 GPIO PC17 I/O LCDDAT17 O URXD1 I PIO, I, PU, ST N1 VDDIOP1 GPIO PC18 I/O LCDDAT18 O PWM0 O PIO, I, PU, ST N2 VDDIOP1 GPIO PC19 I/O LCDDAT19 O PWM1 O PIO, I, PU, ST N3 VDDIOP1 GPIO PC20 I/O LCDDAT20 O PWM2 O PIO, I, PU, ST P1 VDDIOP1 GPIO PC21 I/O LCDDAT21 O PWM3 O PIO, I, PU, ST P2 VDDIOP1 GPIO PC22 I/O LCDDAT22 O TXD3 O PIO, I, PU, ST P3 VDDIOP1 GPIO PC23 I/O LCDDAT23 O RXD3 I PIO, I, PU, ST R1 VDDIOP1 GPIO PC24 I/O LCDDISP O RTS3 O PIO, I, PU, ST R3 VDDIOP1 GPIO PC25 I/O CTS3 I PIO, I, PU, ST R2 VDDIOP1 GPIO PC26 I/O SCK3 I/O PIO, I, PU, ST LCDPWM O SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 12 Table 4-1. BGA217 Pin Description (Continued) Primary Alternate PIO Peripheral A PIO Peripheral B PIO Peripheral C Reset State Signal Dir Signal, Dir, PU, PD, ST O RTS1 O PIO, I, PU, ST LCDHSYNC O CTS1 I PIO, I, PU, ST I/O LCDDEN O SCK1 I/O PIO, I, PU, ST PCK1 O PIO, I, PU, ST Ball Power Rail I/O Type Signal Dir T1 VDDIOP1 GPIO PC27 M4 VDDIOP1 GPIO N4 VDDIOP1 Signal Dir Signal Dir I/O LCDVSYNC PC28 I/O GPIO_CLK PC29 Signal Dir T2 VDDIOP1 GPIO_CLK2 PC30 I/O LCDPCK O U1 VDDIOP1 GPIO PC31 I/O FIQ I PIO, I, PU, ST P15 VDDNF EBI PD0 I/O NANDOE O PIO, I, PU N14 VDDNF EBI PD1 I/O NANDWE O PIO, I, PU M15 VDDNF EBI PD2 I/O A21/NANDALE O A21,O, PD M14 VDDNF EBI PD3 I/O A22/NANDCLE O A22,O, PD P16 VDDNF EBI PD4 I/O NCS3 O PIO, I, PU M17 VDDNF EBI PD5 I/O NWAIT I PIO, I, PU L15 VDDNF EBI PD6 I/O D16 O PIO, I, PU L16 VDDNF EBI PD7 I/O D17 O PIO, I, PU L17 VDDNF EBI PD8 I/O D18 O PIO, I, PU K17 VDDNF EBI PD9 I/O D19 O PIO, I, PU K16 VDDNF EBI PD10 I/O D20 O PIO, I, PU K15 VDDNF EBI PD11 I/O D21 O PIO, I, PU J17 VDDNF EBI PD12 I/O D22 O PIO, I, PU J16 VDDNF EBI PD13 I/O D23 O PIO, I, PU H17 VDDNF EBI PD14 I/O D24 O J15 VDDNF EBI PD15 I/O D25 O A20 O A20, O, PD G17 VDDNF EBI PD16 I/O D26 O A23 O A23, O, PD H16 VDDNF EBI PD17 I/O D27 O A24 O A24, O, PD H15 VDDNF EBI PD18 I/O D28 O A25 O A25, O, PD F17 VDDNF EBI PD19 I/O D29 O NCS2 O PIO, I, PU G16 VDDNF EBI PD20 I/O D30 O NCS4 O PIO, I, PU E17 VDDNF EBI PD21 I/O D31 O NCS5 O PIO, I, PU H8 H9 H10 VDDIOM POWER VDDIOM I I J14 K14 L14 VDDNF POWER VDDNF I I J8 J9 J10 K9 K10 GNDIOM GND GNDIOM I I P9 P12 VDDIOP0 POWER VDDIOP0 I I L3 L4 VDDIOP1 POWER VDDIOP1 I I P6 P7 P13 GNDIOP GND GNDIOP I I PIO, I, PU SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 13 Table 4-1. BGA217 Pin Description (Continued) Primary Alternate Signal PIO Peripheral A Dir Signal Dir PIO Peripheral B Signal Dir PIO Peripheral C Signal Dir Reset State Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir D6 VDDBU POWER VDDBU I I D5 B3 GNDBU GND GNDBU I I C4 VDDANA POWER VDDANA I I B2 GNDANA GND GNDANA I I T16 VDDPLL POWER VDDPLL I I P14 GNDPLL GND GNDPLL I I R14 VDDOSC POWER VDDOSC I I R15 VDDUSB POWER VDDUSB I I I N16 VDDFUSE POWER VDDFUSE M16 GNDFUSE GND GNDFUSE I T17 GNDUSB GND GNDUSB I I C8 G15 J4 P10 VDDCORE POWER VDDCORE I I D8 H14 K8 P11 GNDCORE GND GNDCORE I I B14 VDDIOM EBI D0 I/O O, PD A14 VDDIOM EBI D1 I/O O, PD C14 VDDIOM EBI D2 I/O O, PD D13 VDDIOM EBI D3 I/O O, PD C13 VDDIOM EBI D4 I/O O, PD B13 VDDIOM EBI D5 I/O O, PD A13 VDDIOM EBI D6 I/O O, PD C12 VDDIOM EBI D7 I/O O, PD D12 VDDIOM EBI D8 I/O O, PD B12 VDDIOM EBI D9 I/O O, PD C11 VDDIOM EBI D10 I/O O, PD D11 VDDIOM EBI D11 I/O O, PD A12 VDDIOM EBI D12 I/O O, PD B11 VDDIOM EBI D13 I/O O, PD A11 VDDIOM EBI D14 I/O O, PD C10 VDDIOM EBI D15 I/O O, PD D17 VDDIOM EBI_O A0 O NBS0 O O, PD VDDIOM EBI_O A1 O NBS2/ DQM2/ NWR2 O O, PD F16 VDDIOM EBI_O A2 O O, PD B17 VDDIOM EBI_O A3 O O, PD A17 VDDIOM EBI_O A4 O O, PD F15 VDDIOM EBI_O A5 O O, PD I C17 SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 14 Table 4-1. BGA217 Pin Description (Continued) Primary Alternate Signal PIO Peripheral A Dir Signal Dir PIO Peripheral B Signal Dir PIO Peripheral C Signal Dir Reset State Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir E16 VDDIOM EBI_O A6 O O, PD D16 VDDIOM EBI_O A7 O O, PD E15 VDDIOM EBI_O A8 O O, PD G14 VDDIOM EBI_O A9 O O, PD C16 VDDIOM EBI_O A10 O O, PD F14 VDDIOM EBI_O A11 O O, PD B16 VDDIOM EBI_O A12 O O, PD A16 VDDIOM EBI_O A13 O O, PD C15 VDDIOM EBI_O A14 O O, PD D15 VDDIOM EBI_O A15 O O, PD B15 VDDIOM EBI_O A16 O BA0 O O, PD E14 VDDIOM EBI_O A17 O BA1 O O, PD A15 VDDIOM EBI_O A18 O BA2 O O, PD D14 VDDIOM EBI_O A19 O O, PD B7 VDDIOM EBI_O NCS0 O O, PU C5 VDDIOM EBI_O NCS1 O C7 VDDIOM EBI_O NRD O A6 VDDIOM EBI_O NWR0 O NWRE O O, PU C6 VDDIOM EBI_O NWR1 O NBS1 O O, PU VDDIOM EBI_O NWR3 O NBS3/ DQM3 O O, PU A10 VDDIOM EBI_CLK SDCK O O A9 VDDIOM EBI_CLK #SDCK O O D10 VDDIOM EBI_O SDCKE O O, PU B9 VDDIOM EBI_O RAS O O, PU D9 VDDIOM EBI_O CAS O O, PU B10 VDDIOM EBI_O SDWE O O, PU B6 VDDIOM EBI_O SDA10 O O, PU C9 VDDIOM EBI_O DQM0 O O, PU A8 VDDIOM EBI_O DQM1 O O, PU B8 VDDIOM EBI DQS0 I/O O, PD A7 VDDIOM EBI DQS1 I/O O, PD D7 SDCS O O, PU O, PU A2 VDDANA POWER ADVREF I I P17 VDDUSB USBFS HDP I/O O, PD N17 VDDUSB USBFS HDM I/O O, PD R17 VDDUSB USBFS DDP I/O O, PD R16 VDDUSB USBFS DDM I/O O, PD A5 VDDBU SYSC WKUP I I, ST B5 VDDBU SYSC SHDN O O, PU U15 VDDCORE RSTJTAG BMS I I, PD, ST B4 VDDBU SYSC JTAGSEL I I, PD SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 15 Table 4-1. BGA217 Pin Description (Continued) Primary Alternate Signal Dir PIO Peripheral A Signal Dir PIO Peripheral B Signal Dir PIO Peripheral C Signal Dir Reset State Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir R12 VDDIOP0 RSTJTAG TCK I I, ST R11 VDDIOP0 RSTJTAG TDI I I, ST U14 VDDIOP0 RSTJTAG TDO O O T13 VDDIOP0 RSTJTAG TMS I I, ST T14 VDDIOP0 RSTJTAG RTCK O O R13 VDDIOP0 RSTJTAG NRST I/O I, PU, ST T15 VDDIOP0 RSTJTAG NTRST I I, PU, ST A4 VDDBU CLOCK XIN32 I I A3 VDDBU CLOCK XOUT32 O O U17 VDDIOP0 CLOCK XIN I I U16 VDDIOP0 CLOCK XOUT O O N15 NC SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 16 4.4 247-ball BGA Package Pinout Table 4-2. BGA247 Pin Description Primary Alternate Ball Power Rail I/O Type Signal Dir Signal Dir PIO Peripheral A PIO Peripheral B Signal Dir Signal Dir PIO Peripheral C Reset State Signal Signal, Dir, PU, PD, ST Dir P3 VDDIOP0 GPIO PA0 I/O TXD0 O SPI1_NPCS1 O PIO, I, PU, ST R2 VDDIOP0 GPIO PA1 I/O RXD0 I SPI0_NPCS2 O PIO, I, PU, ST R9 VDDIOP0 GPIO PA2 I/O RTS0 O PIO, I, PU, ST N5 VDDIOP0 GPIO PA3 I/O CTS0 I PIO, I, PU, ST P10 VDDIOP0 GPIO PA4 I/O SCK0 I/O PIO, I, PU, ST R3 VDDIOP0 GPIO PA5 I/O TXD1 O PIO, I, PU, ST R10 VDDIOP0 GPIO PA6 I/O RXD1 I PIO, I, PU, ST T2 VDDIOP0 GPIO PA7 I/O TXD2 O SPI0_NPCS1 O PIO, I, PU, ST P6 VDDIOP0 GPIO PA8 I/O RXD2 I SPI1_NPCS0 I/O PIO, I, PU, ST T3 VDDIOP0 GPIO PA9 I/O DRXD I PIO, I, PU, ST U2 VDDIOP0 GPIO PA10 I/O DTXD O PIO, I, PU, ST P5 VDDIOP0 GPIO PA11 I/O SPI0_MISO I/O V2 VDDIOP0 GPIO PA12 I/O SPI0_MOSI I/O MCDA5 I/O PIO, I, PU, ST V1 VDDIOP0 GPIO_CLK PA13 I/O SPI0_SPCK I/O MCDA6 I/O PIO, I, PU, ST W2 VDDIOP0 GPIO PA14 I/O SPI0_NPCS0 I/O MCDA7 I/O PIO, I, PU, ST W1 VDDIOP0 GPIO PA15 I/O MCDA0 I/O MCDA4 I/O PIO, I, PU, ST PIO, I, PU, ST V3 VDDIOP0 GPIO PA16 I/O MCCDA I/O PIO, I, PU, ST R5 VDDIOP0 GPIO_CLK PA17 I/O MCCK I/O PIO, I, PU, ST U3 VDDIOP0 GPIO PA18 I/O MCDA1 I/O PIO, I, PU, ST V4 VDDIOP0 GPIO PA19 I/O MCDA2 I/O PIO, I, PU, ST U4 VDDIOP0 GPIO PA20 I/O MCDA3 I/O V5 VDDIOP0 GPIO PA21 I/O TIOA0 I/O SPI1_MISO I/O PIO, I, PU, ST U5 VDDIOP0 GPIO PA22 I/O TIOA1 I/O SPI1_MOSI I/O PIO, I, PU, ST R6 VDDIOP0 GPIO_CLK PA23 I/O TIOA2 I/O SPI1_SPCK I/O PIO, I, PU, ST R7 VDDIOP0 GPIO PA24 I/O TCLK0 I TK I/O PIO, I, PU, ST U6 VDDIOP0 GPIO PA25 I/O TCLK1 I TF I/O PIO, I, PU, ST V6 VDDIOP0 GPIO PA26 I/O TCLK2 I TD O PIO, I, PU, ST R8 VDDIOP0 GPIO PA27 I/O TIOB0 I/O RD I PIO, I, PU, ST PIO, I, PU, ST U7 VDDIOP0 GPIO PA28 I/O TIOB1 I/O RK I/O PIO, I, PU, ST P11 VDDIOP0 GPIO PA29 I/O TIOB2 I/O RF I/O PIO, I, PU, ST V7 VDDIOP0 GPIO PA30 I/O TWD0 I/O SPI1_NPCS3 O PIO, I, PU, ST N12 VDDIOP0 GPIO PA31 I/O TWCK0 O SPI1_NPCS2 O PIO, I, PU, ST G6 VDDANA GPIO PB0 I/O RTS2 O PIO, I, PU, ST E3 VDDANA GPIO PB1 I/O CTS2 I PIO, I, PU, ST G5 VDDANA GPIO PB2 I/O SCK2 I/O PIO, I, PU, ST F2 VDDANA GPIO PB3 I/O SPI0_NPCS3 O PIO, I, PU, ST E2 VDDANA GPIO_CLK PB4 I/O PIO, I, PU, ST E5 VDDANA GPIO PB5 I/O PIO, I, PU, ST SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 17 Table 4-2. BGA247 Pin Description (Continued) Primary Alternate PIO Peripheral A Signal PIO Peripheral B Dir Signal Dir PIO Peripheral C Reset State Signal Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir Signal Dir Dir C2 VDDANA GPIO_ANA PB6 I/O AD7 I PIO, I, PU, ST B2 VDDANA GPIO_ANA PB7 I/O AD8 I PIO, I, PU, ST A2 VDDANA GPIO_ANA PB8 I/O AD9 I PIO, I, PU, ST B1 VDDANA GPIO_ANA PB9 I/O AD10 I PCK1 O PIO, I, PU, ST A1 VDDANA GPIO_ANA PB10 I/O AD11 I PCK0 O PIO, I, PU, ST C7 VDDANA GPIO_ANA PB11 I/O AD0 I PWM0 O PIO, I, PU, ST C8 VDDANA GPIO_ANA PB12 I/O AD1 I PWM1 O PIO, I, PU, ST D3 VDDANA GPIO_ANA PB13 I/O AD2 I PWM2 O PIO, I, PU, ST F5 VDDANA GPIO_ANA PB14 I/O AD3 I PWM3 O PIO, I, PU, ST E6 VDDANA GPIO_ANA PB15 I/O AD4 I C9 VDDANA GPIO_ANA PB16 I/O AD5 I D2 VDDANA GPIO_ANA PB17 I/O AD6 I E7 VDDANA GPIO PB18 I/O IRQ I F3 VDDIOP1 GPIO PC0 I/O LCDDAT0 O TWD1 I/O PIO, I, PU, ST G2 VDDIOP1 GPIO PC1 I/O LCDDAT1 O TWCK1 O PIO, I, PU, ST PIO, I, PU, ST ADTRG I PIO, I, PU, ST I PIO, I, PU, ST I PIO, I, PU, ST L7 VDDIOP1 GPIO PC2 I/O LCDDAT2 O TIOA3 I/O PIO, I, PU, ST G3 VDDIOP1 GPIO PC3 I/O LCDDAT3 O TIOB3 I/O PIO, I, PU, ST H5 VDDIOP1 GPIO PC4 I/O LCDDAT4 O TCLK3 I PIO, I, PU, ST M7 VDDIOP1 GPIO PC5 I/O LCDDAT5 O TIOA4 I/O PIO, I, PU, ST H3 VDDIOP1 GPIO PC6 I/O LCDDAT6 O TIOB4 I/O PIO, I, PU, ST H2 VDDIOP1 GPIO PC7 I/O LCDDAT7 O TCLK4 I PIO, I, PU, ST J3 VDDIOP1 GPIO PC8 I/O LCDDAT8 O UTXD0 O PIO, I, PU, ST M8 VDDIOP1 GPIO PC9 I/O LCDDAT9 O URXD0 I PIO, I, PU, ST J5 VDDIOP1 GPIO PC10 I/O LCDDAT10 O PWM0 O PIO, I, PU, ST K6 VDDIOP1 GPIO PC11 I/O LCDDAT11 O PWM1 O PIO, I, PU, ST P9 VDDIOP1 GPIO PC12 I/O LCDDAT12 O TIOA5 I/O PIO, I, PU, ST L6 VDDIOP1 GPIO PC13 I/O LCDDAT13 O TIOB5 I/O PIO, I, PU, ST J2 VDDIOP1 GPIO PC14 I/O LCDDAT14 O TCLK5 I PIO, I, PU, ST K3 VDDIOP1 GPIO_CLK PC15 I/O LCDDAT15 O PCK0 O PIO, I, PU, ST K2 VDDIOP1 GPIO PC16 I/O LCDDAT16 O UTXD1 O PIO, I, PU, ST K5 VDDIOP1 GPIO PC17 I/O LCDDAT17 O URXD1 I PIO, I, PU, ST L3 VDDIOP1 GPIO PC18 I/O LCDDAT18 O PWM0 O PIO, I, PU, ST N8 VDDIOP1 GPIO PC19 I/O LCDDAT19 O PWM1 O PIO, I, PU, ST L2 VDDIOP1 GPIO PC20 I/O LCDDAT20 O PWM2 O PIO, I, PU, ST P8 VDDIOP1 GPIO PC21 I/O LCDDAT21 O PWM3 O PIO, I, PU, ST M3 VDDIOP1 GPIO PC22 I/O LCDDAT22 O TXD3 O PIO, I, PU, ST L5 VDDIOP1 GPIO PC23 I/O LCDDAT23 O RXD3 I PIO, I, PU, ST N6 VDDIOP1 GPIO PC24 I/O LCDDISP O RTS3 O PIO, I, PU, ST N2 VDDIOP1 GPIO PC25 I/O CTS3 I PIO, I, PU, ST P7 VDDIOP1 GPIO PC26 I/O SCK3 I/O PIO, I, PU, ST LCDPWM O SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 18 Table 4-2. BGA247 Pin Description (Continued) Primary Alternate Ball Power Rail I/O Type Signal Dir M2 VDDIOP1 GPIO PC27 M5 VDDIOP1 GPIO N3 VDDIOP1 GPIO_CLK M6 VDDIOP1 GPIO_CLK2 P2 VDDIOP1 GPIO R14 VDDNF EBI R15 VDDNF Signal Dir PIO Peripheral A PIO Peripheral B Signal Dir PIO Peripheral C Reset State Signal Dir Signal, Dir, PU, PD, ST Signal Dir I/O LCDVSYNC O RTS1 O PIO, I, PU, ST PC28 I/O LCDHSYNC O CTS1 I PIO, I, PU, ST PC29 I/O LCDDEN O SCK1 I/O PIO, I, PU, ST PC30 I/O LCDPCK O PC31 I/O FIQ I PCK1 O PIO, I, PU, ST PD0 I/O NANDOE O PIO, I, PU EBI PD1 I/O NANDWE O PIO, I, PU PIO, I, PU, ST T17 VDDNF EBI PD2 I/O A21/NANDALE O A21,O, PD P15 VDDNF EBI PD3 I/O A22/NANDCLE O A22,O, PD R17 VDDNF EBI PD4 I/O NCS3 O PIO, I, PU M15 VDDNF EBI PD5 I/O NWAIT I PIO, I, PU N15 VDDNF EBI PD6 I/O D16 O PIO, I, PU V13 VDDNF EBI PD7 I/O D17 O PIO, I, PU L14 VDDNF EBI PD8 I/O D18 O PIO, I, PU W18 VDDNF EBI PD9 I/O D19 O PIO, I, PU V18 VDDNF EBI PD10 I/O D20 O PIO, I, PU W19 VDDNF EBI PD11 I/O D21 O PIO, I, PU V19 VDDNF EBI PD12 I/O D22 O PIO, I, PU N18 VDDNF EBI PD13 I/O D23 O PIO, I, PU L15 VDDNF EBI PD14 I/O D24 O N17 VDDNF EBI PD15 I/O D25 O A20 O A20, O, PD PIO, I, PU M18 VDDNF EBI PD16 I/O D26 O A23 O A23, O, PD M17 VDDNF EBI PD17 I/O D27 O A24 O A24, O, PD P17 VDDNF EBI PD18 I/O D28 O A25 O A25, O, PD L18 VDDNF EBI PD19 I/O D29 O NCS2 O PIO, I, PU K15 VDDNF EBI PD20 I/O D30 O NCS4 O PIO, I, PU L17 VDDNF EBI PD21 I/O D31 O NCS5 O PIO, I, PU E8, E9, E13, F7, F8, F9, G14 VDDIOM POWER VDDIOM I I M14,P 13,U10 ,V9, V10, V11 VDDNF POWER VDDNF I I SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 19 Table 4-2. BGA247 Pin Description (Continued) Primary Alternate Signal Dir PIO Peripheral A Signal Dir PIO Peripheral B Signal Dir PIO Peripheral C Reset State Signal Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir Dir H6, H7, J6, J7, J8, F10, F11, F12, F13, F14, F15, F16 GNDIOM GND GNDIOM I I N11, M12, M13 VDDIOP0 POWER VDDIOP0 I I M9, M10, M11 VDDIOP1 POWER VDDIOP1 I I L10, L11, L12, L13, V14 GNDIOP GND GNDIOP I I B6 VDDBU POWER VDDBU I I B7 GNDBU GND GNDBU I I F6 VDDANA POWER VDDANA I I C3 GNDANA GND GNDANA I I V17 VDDPLL POWER VDDPLL I I U16 GNDPLL GND GNDPLL I I P14 VDDFUSE POWER VDDFUSE I I N14 GNDFUSE GND GNDFUSE I I R12 VDDOSC POWER VDDOSC I I U13 VDDUSB POWER VDDUSB I I U17 GNDUSB GND GNDUSB I I J12, J13, J14, K10, K11, K12, K13, K14, U15 VDDCORE POWER VDDCORE I I H9, J9, J10, J11, K7, K8 K9, L8, L9 GNDCORE GND GNDCORE I I A19 VDDIOM EBI D0 I/O I, PD E15 VDDIOM EBI D1 I/O I, PD C18 VDDIOM EBI D2 I/O I, PD SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 20 Table 4-2. BGA247 Pin Description (Continued) Primary Alternate Signal PIO Peripheral A Dir Signal Dir Reset State Signal Signal, Dir, PU, PD, ST Power Rail I/O Type Signal Dir D15 VDDIOM EBI D3 I/O I, PD B17 VDDIOM EBI D4 I/O I, PD E14 VDDIOM EBI D5 I/O I, PD C16 VDDIOM EBI D6 I/O I, PD A18 VDDIOM EBI D7 I/O I, PD B15 VDDIOM EBI D8 I/O I, PD G12 VDDIOM EBI D9 I/O I, PD C14 VDDIOM EBI D10 I/O I, PD D13 VDDIOM EBI D11 I/O I, PD A16 VDDIOM EBI D12 I/O I, PD A14 VDDIOM EBI D13 I/O I, PD B13 VDDIOM EBI D14 I/O I, PD H13 VDDIOM EBI D15 I/O I, PD J15 VDDIOM EBI_O A0 O NBS0 O O K18 VDDIOM EBI_O A1 O NBS2/ DQM2/ NWR2 O O K17 VDDIOM EBI_O A2 O O H15 VDDIOM EBI_O A3 O O J18 VDDIOM EBI_O A4 O O J17 VDDIOM EBI_O A5 O O G17 VDDIOM EBI_O A6 O O H17 VDDIOM EBI_O A7 O O H18 VDDIOM EBI_O A8 O O H14 VDDIOM EBI_O A9 O O G18 VDDIOM EBI_O A10 O O F18 VDDIOM EBI_O A11 O O F17 VDDIOM EBI_O A12 O O E19 VDDIOM EBI_O A13 O O D19 VDDIOM EBI_O A14 O O E18 VDDIOM EBI_O A15 O O G15 VDDIOM EBI_O A16 O BA0 O O E16 VDDIOM EBI_O A17 O BA1 O O B19 VDDIOM EBI_O A18 O BA2 O O D17 VDDIOM EBI_O A19 O O B9 VDDIOM EBI_O NCS0 O O, PU B8 VDDIOM EBI_O NCS1 O O Dir PIO Peripheral C Ball SDCS Signal PIO Peripheral B Dir O, PU E10 VDDIOM EBI_O NRD O G10 VDDIOM EBI_O NWR0 O NWRE O O, PU O, PU C10 VDDIOM EBI_O NWR1 O NBS1 O O, PU G9 VDDIOM EBI_O NWR3 O NBS3/ DQM3 O O, PU SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 21 Table 4-2. BGA247 Pin Description (Continued) Primary Alternate Signal Dir PIO Peripheral A Signal Dir PIO Peripheral B Signal Dir PIO Peripheral C Reset State Signal Signal, Dir, PU, PD, ST Ball Power Rail I/O Type Signal Dir Dir B10 VDDIOM EBI_CLK SDCK O O B11 VDDIOM EBI_CLK #SDCK O O C12 VDDIOM EBI_O SDCKE O O, PU G11 VDDIOM EBI_O RAS O O, PU E12 VDDIOM EBI_O CAS O O, PU H12 VDDIOM EBI_O SDWE O O, PU H10 VDDIOM EBI_O SDA10 O O, PU A12 VDDIOM EBI_O DQM0 O O, PU C11 VDDIOM EBI_O DQM1 O O, PU H11 VDDIOM EBI DQS0 I/O I, PD E11 VDDIOM EBI DQS1 I/O I, PD B3 VDDANA POWER ADVREF I I T18 VDDUSB USBFS HDP I/O O, PD U18 VDDUSB USBFS HDM I/O O, PD P18 VDDUSB USBFS DDP I/O O, PD R18 VDDUSB USBFS DDM I/O O, PD C6 VDDBU SYSC WKUP I I, ST G8 VDDBU SYSC SHDN O O, PU U14 VDDCORE RSTJTAG BMS I I, PU, ST C4 VDDBU SYSC JTAGSEL I I, PD, ST C5 VDDBU SYSC TST I I, PD, ST V8 VDDIOP0 RSTJTAG TCK I I, ST U8 VDDIOP0 RSTJTAG TDI I I, ST P12 VDDIOP0 RSTJTAG TDO O O, ST R11 VDDIOP0 RSTJTAG TMS I I, ST V12 VDDIOP0 RSTJTAG RTCK O O, ST U11 VDDIOP0 RSTJTAG NRST I/O O, PU, ST U9 VDDIOP0 RSTJTAG NTRST I I, PU, ST B4 VDDBU CLOCK XIN32 I I B5 VDDBU CLOCK XOUT32 O O V16 VDDIOP0 CLOCK XIN I I V15 VDDIOP0 CLOCK XOUT O O H8 NC U12 NC R13 NC SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 22 5. Mechanical Characteristics 5.1 217-ball BGA Package Figure 5-1. 217-ball BGA Package Drawing SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 23 5.2 247-ball BGA Package Figure 5-2. 247-ball BGA Package Drawing SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 24 6. AT91SAM9N12/CN11/CN12 Ordering Information Table 6-1. SAM9N12/CN11/CN12 Ordering Information Ordering Code MRL Package Carrier Type Package Type Temperature Operating Range AT91SAM9CN12-CU A BGA217 Tray Green Industrial -40°C to 85°C AT91SAM9CN11-CU A BGA217 Tray Green Industrial -40°C to 85°C AT91SAM9N12-CU A BGA217 Tray Green Industrial -40°C to 85°C AT91SAM9CN12-CFU A BGA247 Tray Green Industrial -40°C to 85°C AT91SAM9CN11-CFU A BGA247 Tray Green Industrial -40°C to 85°C AT91SAM9N12-CFU A BGA247 Tray Green Industrial -40°C to 85°C AT91SAM9CN12B-CU B BGA217 Tray Green Industrial -40°C to 85°C AT91SAM9CN12B-CUR B BGA217 Tape & Reel Green Industrial -40°C to 85°C AT91SAM9CN12B-CFU B BGA247 Tray Green Industrial -40°C to 85°C AT91SAM9CN12B-CFUR B BGA247 Tape & Reel Green Industrial -40°C to 85°C SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 25 Revision History In the table that follows, the most recent version of the document appears first. “rfo” indicates changes requested during the document review and approval loop. Doc. Rev Comments Change Request Ref. “Description”, revised content and presentation. rfo Section 1. “Features”: rfo - added a list on safety features - moved SHA references to “Safety” list 11063HS Section 3. “Signal Description”: 8531/rfo - removed references to VBG pins in Table 3-1, “Signal Description List” - removed Table 3-2 SAM9N12/CN11/CN12 I/O Type Description Table 6-1, “SAM9N12/CN11/CN12 Ordering Information”: rfo - added MRL and Carrier Type columns - added ordering codes for MRLB 11063GS Table 6-1, “SAM9N12/CN11/CN12 Ordering Information” updated with new ordering codes for BGA247 packages. 8804 Section “Description” put before Section 1. “Features”. rfo Sections 5 to 9 deleted (5 Power Considerations, 6 Memories, 7 System Controller, 8 Peripherals, 9 Embedded Peripherals). 11063FS Added “Write Protected Registers in Section 1. “Features”. 8213 Product name updated to SAM9N12/SAM9CN11/SAM9CN12. 8244 Section “Description” updated with the various devices configurations: device configuration table added. Bullets for SAM9CN11 and SAM9N12 added in Section 7.3 “Chip Identification”. Ordering codes added for SAM9N12 and SAM9CN11 in Table 6-1, “SAM9N12/CN11/CN12 Ordering Information”. Section 1. “Features”, Memories, “Boot on NANDFlash, SDCard, DataFlash or serial DataFlash. Programmable order” removed. Section “Description”, 125 MHz --> 133 MHz 7928 “FIPS PUB 46-3 compliant TDES” removed from 3rd paragraph 11063ES rfo rfo Table 3-1, “Signal Description List”, NFD0-NFD16 --> NFD0-NFD15 rfo Section 7.3 “Chip Identification”, Chip ID: 0x819A_05A0 --> 0x819A_05A1 Table 8-1, “SAM9N12/CN11/CN12 Peripheral Identifiers”, Replaced keyword ‘Reserved’ on 4th row with ‘FUSE’ Section 9.8 “Power Management Controller (PMC)”, 250MHz DDR --> 133 MHz DDR rfo 8039 7975 Section 1. “Features”, Updated...”Processor running up to 400 MHz...” 11063DS 7847 Updated...”System running up to 133 MHz...” Back page: Updated point of contact information. Marcom SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 26 Doc. Rev Comments Change Request Ref. Section 1. “Features”SLC NAND Flash is supported. rfo Section “Description”, 1st paragraph, the 2nd sentence was removed. 11063CS Table 4-1, “BGA217 Pin Description”, table updated with values in Ball column. 7395 Table 5-1, “SAM9N12/CN11/CN12 Power Supplies”, VDDFUSE Voltage Range updated, 3.0V3.6V. rfo Section 6.3.3 “DDR-SDRAM Controller”, revised. 7269 Section 7.3 “Chip Identification”, removed “two” lines. 7392 Section 8.4 “Peripheral Signal Multiplexing on I/O Lines”, removed irrelevant text. rfo Elsewhere, minor grammar revisions. Advance Information status removed. 11063BS Table 4-2, “BGA247 Pin Description”, updated. 11063AS First issue 7271 SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET] 11063HS–ATARM–27-Sep-13 27 Atmel Corporation 1600 Technology Drive Atmel Asia Limited Unit 01-5 & 16, 19F Atmel Munich GmbH Business Campus Atmel Japan G.K. 16F Shin-Osaki Kangyo Bldg San Jose, CA 95110 BEA Tower, Millennium City 5 Parkring 4 1-6-4 Osaki, Shinagawa-ku USA 418 Kwun Tong Road D-85748 Garching b. Munich Tokyo 141-0032 Tel: (+1) (408) 441-0311 Kwun Tong, Kowloon GERMANY JAPAN Fax: (+1) (408) 487-2600 HONG KONG Tel: (+49) 89-31970-0 Tel: (+81) (3) 6417-0300 www.atmel.com Tel: (+852) 2245-6100 Fax: (+49) 89-3194621 Fax: (+81) (3) 6417-0370 Fax: (+852) 2722-1369 © 2013 Atmel Corporation. All rights reserved. / Rev.: 11063HS–ATARM–27-Sep-13 Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®, SAM-BA® and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM®, ARM926EJ-S™, Thumb®, AMBA™ and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.