Atmel | SMART ARM® Core-based Embedded Microprocessors High Performance, Power Efficient, Easy to Use Atmel | SMART SAMA5 ARM Cortex-A5 MPUs Memory Connectivity L1 Cache Memory(KB) (Instruction/ Data) L2 Cache (KB) LPSDR / SDRAM QSPI Interface DDR2 / LPDDR / LPDDR2 DDR3 / DDR3L / LPDDR3 SLC ECC (bit) MLC ECC (bit) UART SPI TWI (I2C) SSC & l2S CAN Device Only Device and Host 1/1/1 600 1.8V 128 2x32 128 -- -- 1/1/1 -- 24 24 7 8 4 2 -- -- 1 HS SAMA5D43 Cortex-A5 1/1/1 600 1.8V 128 2x32 128 -- -- 1/1/1 -- 24 24 7 8 4 2 -- -- 1 HS SAMA5D42 Cortex-A5 1/1/1 600 1.8V 128 2x32 128 -- -- 1/1/1 -- 24 24 7 8 4 2 -- -- 1 HS SAMA5D41 Cortex-A5 1/1/1 600 1.8V 128 2x32 128 -- -- 1/1/1 -- 24 24 7 8 4 2 -- -- 1 HS SAMA5D36 Cortex-A5 1/1/1 536 1.2V 128 2x32 -- -- -- 1/1/1 -- 24 24 7 6 3 2 2 -- 1 HS SAMA5D35 Cortex-A5 1/-/- 536 1.2V 128 2x32 -- -- -- 1/1/1 -- 24 24 7 6 3 2 2 -- 1 HS SAMA5D34 Cortex-A5 1/-/- 536 1.2V 128 2x32 -- -- -- 1/1/1 -- 24 24 5 6 3 2 2 -- 1 HS SAMA5D33 Cortex-A5 1/-/- 536 1.2V 128 2x32 -- -- -- 1/1/1 -- 24 24 5 6 3 2 -- -- 1 HS SAMA5D31 Cortex-A5 1/-/- 536 1.2V 128 2x32 -- -- -- 1/1/1 -- 24 24 7 6 3 2 -- -- 1 HS SAMA5D28 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 10 7 7 4 2 -- 1 HS SAMA5D27 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 10 7 7 4 2 -- 1 HS SAMA5D26 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 10 7 7 4 -- -- 1 HS SAMA5D24 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 10 7 7 4 -- -- 1 HS SAMA5D23 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 9 6 6 4 1 -- 1 HS SAMA5D22 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 9 6 6 4 1 -- 1 HS SAMA5D21 New! Cortex-A5 1/1/1 500 1.2V 128 2x32 128 -- 2 1/1/1 1/1/1 32 32 9 6 6 4 -- -- 1 HS SRAM (KB) Cortex-A5 Core Operating Voltage SAMA5D44 Device Name Clock Speed (MHz)* USB VFPU / NEON / Trustzone NAND Core Core Sub-System * Clock Speed: Max clock speed @ +85°C. Temperature Range: UART: TWI: SSC: -40°C to +85°C (Ambient) Support for RS485, ISO7816, IrDA, LIN, modem control lines and SPI on selected UARTs. Two Wire Interface, interconnects components on a two-wire bus. Serial Synchronous Controller, supports many serial synchronous communications protocols used in audio and telecom applications such as I2S, short or long frame sync. 16-bit and 32-bit Timers: Capture/Compare, Waveform generation and PWM modes. ECC: Error Corrected Code controller. Security level: Adv.= HW Encryption engine + on the fly DDR encryption / decryption + Secure Storage + Tamper Pin Med. = HW Encryption engine Y= Yes 2 © 2015 / www.atmel.com Atmel | SMART ARM Core-based Embedded Microprocessors High Performance, Power Efficient, Easy to Use IEEE1588 support SD / eMMC ClassD / PDM / Audio PLL Max I/O Pins Graphic LCD LCD Overlay Resistive Touchscreen HW Video Decoder Camera Interface Security Level Secure Boot Tamper Pins Environmental Monitors 32-bit Timers PWM Channels 10-bit ADC Channels 12-bit ADC Channels Extended Temperature Range (-40°C / +105°C Ambient) 2 HS 2 -- Y 2 -- 152 1 Y Y 30fps, 720p 1 Adv. Y -- N 3 4 5 -- -- BGA 361, 16x16, 0.8mm pitch 2 HS 2 -- Y 2 -- 152 1 Y Y 30fps, 720p 1 Adv. Y -- N 3 4 5 -- -- BGA 289, 14x14, 0.8mm pitch 2 HS 2 -- Y 2 -- 152 1 Y Y 30fps, 720p 1 Adv. Y -- -- 3 4 5 -- -- BGA 361, 16x16, 0.8mm pitch 2 HS 2 -- Y 2 -- 152 1 Y Y 30fps, 720p 1 Adv. Y -- -- 3 4 5 -- -- BGA 289, 14x14, 0.8mm pitch 2 HS 1 1 Y 3 -- 160 1 Y Y -- 1 Med. Y -- -- 6 4 -- 12 Y BGA 324, 15x15, 0.8mm pitch 2 HS 1 1 Y 3 -- 160 -- -- Y -- 1 Med. Y -- -- 6 4 -- 12 Y BGA 324, 15x15, 0.8mm pitch 2 HS -- 1 Y 3 -- 160 1 Y Y -- 1 Med. Y -- -- 5 4 -- 12 -- BGA 324, 15x15, 0.8mm pitch 2 HS -- 1 Y 2 -- 160 1 Y Y -- 1 Med. Y -- -- 5 4 -- 12 -- BGA 324, 15x15, 0.8mm pitch 2 HS 1 -- -- 3 -- 160 1 Y Y -- 1 Med. Y -- -- 5 4 -- 12 -- BGA 324, 15x15, 0.8mm pitch BGA 324, 12x12, 0.5mm pitch 1 HS, 1 HSIC 1 -- Y 2 1/1/1 128 1 Y Y -- 1 PCI Precertified Y 8 Y 3 4 -- 12 Y BGA 289, 14x14, 0.8mm pitch 1 HS, 1 HSIC 1 -- Y 2 1/1/1 128 1 Y Y -- 1 Adv. Y 8 Y 3 4 -- 12 Y BGA 289, 14x14, 0.8mm pitch 1 HS 1 -- Y 2 1/1/1 128 1 Y Y -- 1 Med. Y 8 Y 3 4 -- 12 Y BGA 289, 14x14, 0.8mm pitch 1 HS, 1 HSIC 1 -- Y 2 1/1/1 105 1 Y Y -- 1 Adv. Y 2 Y 3 4 -- 12 -- BGA 256, 8x8, 0.4mm pitch 1 HS 1 -- Y 1 1/1/1 72 1 Y Y -- 1 PCI Precertified Y 6 Y 3 4 -- 12 Y BGA 196, 11x11, 0.75mm pitch 1 HS 1 -- Y 1 1/1/1 72 1 Y Y -- 1 Adv. Y 6 Y 3 4 -- 12 Y BGA 196, 11x11, 0.75mm pitch 1 HS 1 -- Y 1 1/1/1 72 1 Y Y -- 1 Med. Y 6 Y 3 4 -- 12 -- BGA 196, 11x11, 0.75mm pitch Ethernet Packages 10 /100 /1000 EMAC Control 10 /100 Ethernet MAC Security Host Only User Interface Peripheral implementation may vary among products, please consult individual product datasheet for detailed description Camera Interface: For CMOS-type image sensor, ITU-R BT. 601/656 external interface, programmable frame capture rate, up to 12-bit data interface, SAV and EAV synchronization, preview path with scaler, YCbCr format ; Raw Bayer support with SAMA5D2 Series Graphics LCD: 24-bit parallel interface; supports STN & TFT displays, up to 16-bits per pixel in STN color mode, up to 16M colors in TFT mode. Video Decoder: Hardware video decoding & image post processing : H.264, MPEG4, H.263, MPEG2, JPEG, VP8. eMMC™: V4.3 - MLC NandFlash supported through MMC interface; V4.5 support for SAMA5D2 Series. USB: High speed (HS) or Full Speed (FS). Atmel | SMART ARM Core-based Embedded Microprocessors 3 Atmel | SMART SAM9 ARM9-based MPUs Memory Connectivity SRAM (KB) L1 Cache Memory(KB) (Instruction / Data) LPSDR / SDRAM External Bus Interface DDR2 / LPDDR / LPDDR2 SLC ECC (bit) MLC ECC (bit) UART SPI TWI (I2C) SSC (I2S) CAN Device Only Device and Host SAM9M10/M11 ARM926EJ-S 400 1.0V 64 2x32 1/1 2 1/1/- 1 -- 5 6 2 2 -- -- 1 HS SAM9G45/G46 ARM926EJ-S 400 1.0V 64 2x32 1/1 2 1/1/- 1 -- 5 6 2 2 -- -- 1 HS SAM9X35 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 5 3 1 2 -- 1 HS SAM9X25 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 6 3 1 2 -- 1 HS SAM9G35 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 6 5 3 1 -- -- 1 HS SAM9G25 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 6 3 1 -- -- 1 HS SAM9G15 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 5 5 3 1 -- -- 1 HS SAM9CN12 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 6 2 1 -- 1 FS -- SAM9CN11 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 6 2 1 -- 1 FS -- SAM9N12 ARM926EJ-S 400 1.0V 32 2x16 1/1 1 1/1/- 24 24 7 6 2 1 -- 1 FS -- SAM9G20 ARM926EJ-S 400 1.0V 32 2x16 -/1 1 -- 1 -- 7 6 1 1 -- 1 FS -- SAM9G10 ARM926EJ-S 266 1.2V 16 2x16 -/1 1 -- 1 -- 4 5 1 3 -- 1 FS -- SAM9263 ARM926EJ-S 240 1.3V 96 2x16 -/1 2 -- 1 -- 4 5 1 2 1 1 FS -- SAM9261 ARM926EJ-S 190 1.2V 160 2x16 -/1 1 -- 1 -- 4 5 1 3 -- 1 FS -- SAM9260 ARM926EJ-S 190 1.2V 8 2x8 -/1 1 -- 1 -- 7 6 1 1 -- 1 FS -- Device Name Core Operating Voltage USB Clock Speed (MHz)* NAND Core Core Sub-System * Clock Speed: Max clock speed @ +85°C. Temperature Range: UART: TWI: SSC: -40°C to +85°C (Ambient) Support for RS485, ISO7816, IrDA, LIN, modem control lines and SPI on selected UARTs. Two Wire Interface, interconnects components on a two-wire bus. Serial Synchronous Controller, supports many serial synchronous communications protocols used in audio and telecom applications such as I2S, short or long frame sync. 16-bit and 32-bit Timers: Capture/Compare, Waveform generation and PWM modes. ECC: Error Corrected Code controller. Security level: Adv.= HW Encryption engine + on the fly DDR encryption / decryption + Secure Storage + Tamper Pin Med. = HW Encryption engine Y= Yes 4 © 2015 / www.atmel.com Atmel | SMART ARM Core-based Embedded Microprocessors High Performance, Power Efficient, Easy to Use User Interface Security Control 10/100 Ethernet MAC SD / eMMC Soft Modem Max I/O Pins Graphic LCD LCD Overlay Resistive Touchscreen HW Video Decoder Camera Interface Security Level Secure Boot 16-bit Timers 32-bit Timers PWM Channels 10-bit ADC Channels 2 HS 1 2 -- 160 1 Y Y 30fps, D1 1 Med. (M11) -- 6 -- 4 8 BGA 324, 15x15, 0.8mm pitch 2 HS 1 2 -- 160 1 -- Y -- 1 Med. (G46) -- 6 -- 4 8 BGA 324, 15x15, 0.8mm pitch 1 HS,1 FS 1 2 Y 105 1 Y Y -- -- -- -- -- 6 4 12 BGA 217, 15x15, 0.8mm pitch 1 HS,1 FS 2 2 Y 105 -- -- -- -- -- -- -- -- 6 4 12 BGA 217, 15x15, 0.8mm pitch 1 HS,1 FS 1 2 Y 105 1 Y Y -- -- -- -- -- 6 4 12 BGA 217, 15x15, 0.8mm pitch 1 HS,1 FS 1 2 Y 105 -- -- -- -- 1 -- -- -- 6 4 12 BGA 217, 15x15, 0.8mm pitch BGA 247, 10X10, 0.5mm pitch 1 HS,1 FS -- 2 Y 105 1 Y Y -- -- -- -- -- 6 4 12 BGA 217, 15x15, 0.8mm pitch 1 FS -- 1 -- 105 1 -- Y -- -- Med. Y 6 -- 4 12 BGA 217, 15x15, 0.8mm pitch BGA 247, 10X10, 0.5mm pitch 1 FS -- 1 -- 105 1 -- Y -- -- -- -- 6 -- 4 12 BGA 217, 15x15, 0.8mm pitch BGA 247, 10X10, 0.5mm pitch 1 FS -- 1 -- 105 1 -- Y -- -- -- -- 6 -- 4 12 BGA 217, 15x15, 0.8mm pitch BGA 247, 10X10, 0.5mm pitch 2 FS 1 1 -- 96 -- -- -- -- Y -- -- 6 -- -- 4 BGA 217, 15x15, 0.8mm pitch 2 FS -- 1 -- 96 1 -- -- -- -- -- -- 3 -- -- -- BGA 217, 15x15, 0.8mm pitch 2 FS 1 2 -- 160 1 -- -- -- Y -- -- 3 -- 4 -- BGA 324, 15x15, 0.8mm pitch 2 FS -- 1 -- 96 1 -- -- -- -- -- -- 3 -- -- -- BGA 217, 15x15, 0.8mm pitch 2 FS 1 1 -- 96 -- -- -- -- Y -- -- 6 -- -- 4 BGA 217, 15x15, 0.8mm pitch QFP 208, 28x28, 0.5mm pitch Packages Host Only Ethernet Peripheral implementation may vary among products, please consult individual product datasheet for detailed description Camera Interface: For CMOS-type image sensor, ITU-R BT. 601/656 external interface, programmable frame capture rate, up to 12-bit data interface, SAV and EAV synchronization, preview path with scaler, YCbCr format ; Raw Bayer support with SAMA5D2 Series Graphics LCD: 24-bit parallel interface; supports STN & TFT displays, up to 16-bits per pixel in STN color mode, up to 16M colors in TFT mode. Video Decoder: Hardware video decoding & image post processing : H.264, MPEG4, H.263, MPEG2, JPEG, VP8. eMMC™: V4.3 - MLC NandFlash supported through MMC interface; V4.5 support for SAMA5D2 Series. USB: High speed (HS) or Full Speed (FS). Atmel | SMART ARM Core-based Embedded Microprocessors 5 Evaluation Kits 6 Ordering Code Supported Devices ATSAMA5D2-XULT - NEW! SAMA5D28/D27/D26/D24/D23/D22/D21 ATSAMA5D4-XULT SAMA5D44/D43/D42/D41 ATSAMA5D3-XPLD SAMA5D36/D35/D34/D33/D31 AT91SAM9M10-G45-EK SAM9M10, SAM9G45 AT91SAM9X35-EK SAM9X35 AT91SAM9X25-EK SAM9X25 AT91SAM9G35-EK SAM9G35 AT91SAM9G25-EK SAM9G25 AT91SAM9G15-EK SAM9G15 AT91SAM9CN11-EK SAM9CN11, SAM9CN12 AT91SAM9N12-EK SAM9N12 © 2015 / www.atmel.com Atmel | SMART ARM Core-based Embedded Microprocessors High Performance, Power Efficient, Easy to Use Ordering Code Supported Devices AT91SAM9G20-EK SAM9G20 AT91SAM9260-EK SAM9260 AT91SAM9G10-EK2 SAM9G10 AT91SAM9263-EK SAM9263 AT91SAM-ICE All products Atmel | SMART SAM9 and SAMA5 evaluation kits are delivered with free Board Support Packages (BSP) for Linux®, Android™ and Microsoft® Windows®. For more details: Linux4SAM www.at91.com/linux4sam/ bin/view/Linux4SAM/ Android4SAM www.at91.com/android4sam/ bin/view/Android4SAM/ Atmel | SMART ARM Core-based Embedded Microprocessors Windows4SAM www.at91.com/windows4sam/ bin/view/Windows4SAM/ 7 Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com © 2015 Atmel Corporation. / Rev.: Atmel-6280S-ARM-Corebased-Embedded-MPU_E_US_092015 Atmel,® Atmel logo and combinations thereof, Enabling Unlimited Possibilities,® and others are registered trademarks or trademarks of Atmel Corporation in U. S. and other countries. ARM,® ARM Connected® logo and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.