CONSTITUTION MATERIALS LIST Datasheet The RoHS directive, REACH regulation, and other laws and regulations related to the management of environmentally hazardous substances come into effect. When developing products, the global environmental load must be considered. ROHM pursues green procurement and endeavors to increase the detection accuracy of chemicals contained in parts and procured materials while at the same time placing great importance on the internal chemical management system that was built to ensure that no prohibited substances are procured, used, or shipped in order to provide a steady supply of worry-free products. TR-EMT3FM-HF-JE_Rev.5 Type Transistor № Part Name 1 Mold compound Package JEDEC (JEITA) Mass (mg) EMT3F (Halogen free) - (SC-89) 2.3694 Part No. Weight (mg) 1.3424 CAS № Weight (mg) Portion vs. Products Portion vs. Part Name 60676-86-0 0.9189 38.78% 68.45% Epoxy resin Ⅰ - 0.1261 5.32% 9.39% Epoxy resin Ⅱ - 0.0396 1.67% 2.95% Metal hydroxide 21645-51-2 0.1759 7.42% 13.10% - 0.0779 3.29% 5.80% 1333-86-4 0.0040 0.17% 0.30% Substance Name Silica (amorphous) Stiffening Carbon black Subtotal 2 Lead frame (Base material) 0.7950 Iron (Fe) Nickel (Ni) 1.3424 0.1061 Copper (Cu) 4 External plating 0.0650 Tin (Sn) 0.4611 19.46% 58.00% 7440-02-0 0.3339 14.09% 42.00% 0.7950 7440-50-8 0.1061 7440-31-5 0.0650 Subtotal 0.1061 Subtotal 5 Die 0.0529 Silicon (Si) Gold (Au) 0.0650 0.0080 4.48% 100% 100.00% 4.48% 2.74% 100% 100.00% 2.74% 100% 0.0481 2.03% 90.93% 7440-57-5 0.0048 0.20% 9.07% 0.0529 7440-57-5 Gold (Au) 33.55% 7440-21-3 Subtotal 6 Bonding wire 100% 7439-89-6 Subtotal 3 Lead frame (Surface treatment) 56.66% Subtotal Total - 0.0080 2.23% 0.34% 0.0080 0.34% 2.3694 100% 100% 100.00% 100% - Note Disclaimer ・All information in this document is furnished for exploratory or indicative purposes only. ・This information provides estimates of the average weights and content of component materials. and does not include impurities or metals diffused in the silicon. ・ROHM strives for the accuracy of the information, however, ROHM does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. ・ROHM may make changes to information published in this document at any time and without notice. www.rohm.com ©2014 ROHM Co., Ltd. All rights reserved 2014.4 - Rev.A