VF596E VCXO Low Jitter 9x14mm SMD, PECL/LVPECL Features RoHS Status 12.5MHz to 200MHz frequency range <0.5ps RMS jitter over 12kHz to 20MHz APR to ± 50ppm ECLinPSTM compatible Applications 3.3 or 5.0 Volt Applications Electrical Specifications Parameter Frequency Range Frequency Stability Operating Temperature Symbol Condition T -40 Supply Voltage VCC 4.75 3.15 Supply Current ICC Voltage Control VC F ∆F/F Vs. Operating Temperature APR Phase Noise 1σ Input Impedance fm<10kHz @50% Modulation BW fm Deviation @VC = 2.5V @VC = 1.65V VC = 0V to 3.3V, 25°C VC = 0V to 5.0V, 25°C VC0 @25C, FNOM Unit 200 MHz 25 ppm +85 C 5.25 3.45 65 5.0 3.3 50 45 See “How to Order” chart V mA V ps fj>1kHz kOhm 2 10 ms 50 55 % 10 1.25 2.0 Note ppm kHz 100 ppm 50 ppm/V Linearity Setability (VC for Center Frequency) Max 1 Monotonic, positive Deviation Slope 5.00 3.30 0 0 50 TS Duty Cycle Typ 12.5 50 Ohms Load VCC=5.0V VCC=3.3V Overall Start-up Time Min 1.65 2.5 20 % 2.05 3.0 V @-3dB Note 1 Note 1: Tighter linearity specification available. 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.ctsvalpey.com • RevB0513 Specifications are subject to change without notice 1 VF596E VCXO Low Jitter 9x14mm SMD, PECL/LVPECL Electrical Specifications Parameter Symbol Condition Min Typ Max Unit Note 50 Ohms to VCC-2V or Thevenin Equiv. Bias Required Load Output High Voltage Output Low Voltage Rise/Fall Time Enable/ Disable Time Enable/ Disable Function VOH Max Load 0.9VCC 0.81VCC V VOL Max Load 0.185VCC 0.165VCC V TR/TF 20% to 80% 0.6 ns 100 ns TE/TD Input HIGH (>2.5V) DISABLED Input LOW (<0.5V): or floating: ACTIVE Environmental and Mechanical Conditions Parameter Condition Mechanical Shock Per MIL-STD-202, Method 213, Cond. E Thermal Shock Per MIL-STD-883, Method 1011, Cond. A Vibration Per MIL-STD-883, Method 2007, Cond. A Soldering Conditions 60°C, for 10s, Max., or 230°C for 90s Max. Hermetic Seal Leak rate less than 5x10-8 atm.cc/s of helium 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.ctsvalpey.com • RevB0513 Specifications are subject to change without notice 2 VF596E VCXO Low Jitter 9x14mm SMD, PECL/LVPECL Package Pin Assignments Pin # 1 2 3 4 5 6 Connections VC Negative Enable (internal pull-down) Ground, Case Output Complementary Output VCC All dimensions are typical unless otherwise specified. How to Order VF596E Frequency Stability Code Specification S 20 ppm 25 ppm (std.) — — Supply Voltage Code Specification L — FREQUENCY, MHz Temperature Range Code Specification Code 1 0°C to 70°C -40°C to 85°C XXX 3.3V 5.0V — — APR (ppm) Specification 50 ppm MIN. (std.) TL PbSn (60/40) Tinned lead option Specify Deviation MIN. (up to 500 ppm MAX) 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.ctsvalpey.com • RevB0513 Specifications are subject to change without notice 3