Aerospace Die Brochure PDF

AEROSPACE DIE
January 2016
For general information on Analog Devices Space Qualified products please visit the following address.
http://www.analog.com/aerospace
For technical inquiries on Class K Die please email us at [email protected]
For Sales and Distribution contacts please visit the following address.
http://www.analog.com/en/about-adi/corporate-information/sales-distribution.html
Analog Devices, Inc. 7910 Triad Center Drive, Greensboro, NC 27409
1
Aerospace Die
January 2016
Analog Devices Aerospace Group provides Space Qualified Chips (Die) manufactured in the same wafer fab sites as
packaged parts. Element Evaluation is performed per MIL-PRF-38534, TABLE C-II unless otherwise noted1. Die are
fully traceable to the wafer lot or if requested to the individual wafer.
Significant advantages of purchasing Analog Devices Space Qualified Die over Up-screened die from die vendors:

Die manufactured in ADI’s MIL-PRF-38535 Class V certified wafer fabrication sites conforms to Wafer Lot
Acceptance Test Method 5007 of MIL-STD-883.

Complete traceability provided to wafer lot and if requested to the individual wafer.

Direct contact with the manufacturer to clarify end product performance.

Individual die datasheets available with details of electrical parameters. See “Space Qualified Parts List” and
“Standard Space Level Products” Brochure for ordering information.

Selected die datasheets include radiation guarantee.

1
o
Group E, Subgroup 2 with lot charge plus samples at sample unit price. Certificate of Conformance and test
report included.
o
Standard Radiation Test Plan. Test in accordance with MIL-PRF-38535 with test points at 0K, 100Krad, and
post 24 hours biased anneal.
Direct manufacturer support in defining end point performance for Radiation Tolerance.
See individual Die Datasheets for all applicable exceptions.
Analog Devices, Inc. 7910 Triad Center Drive, Greensboro, NC 27409
2
January 2016
Aerospace Die
COMMITMENT TO THE SPACE MARKET
Analog Devices is committed to serving the needs of
the world space community by manufacturing the
highest quality data conversion and signal processing
products.
. Analog Devices’ certified facilities have been
supplying products for military and space applications
since 1972. Analog Devices now offers state-of-theart, data conversion and linear products to the space
market place which were previously only available as
commercial or military Class B products.
Analog Devices space level operations located in
Greensboro, North Carolina coordinates all space level
V (class S) activities, including business development,
manufacturing and engineering. The addition of new
products is derived from our customers’ needs and the
ability of these products to meet MIL-PRF-38535 QML
level V requirements.
Visit our web site (http://www.analog.com/aerospace)
or contact our factory for the latest Class S updates as
well as for radiation information on these and other
products.
Analog Devices, Inc. Aerospace Product Line standard
product is available in one or more of the following
processes:

MIL-PRF-38535, QMLV (level V)

MIL-PRF-38535, QMLR (level V
With Radiation Qualification)

MIL-PRF-38535, JAN S

Analog Devices, Inc.'s Standard Aerospace Level
Product
See http://www.analog.com/aerospace. (Standard
Space Level Products Program)
The table beginning on page 3 lists the standard
product offered by Analog Device's Aerospace Product
Line.
Product is also available in accordance with source
control drawings. Please call factory for further
information.
For further information see contact list on cover page.
ANALOG DEVICES SPACE LEVEL PRODUCTS
Manufacturing Locations
Space Level Compliance
Class K Die Qualification
(with full SEM Inspection per TM2018)
Class K Die Qualification
(without SEM Inspection)
Class K Die Qualification
(former Hittite Microwave Products)
Wafer Fab
Assembly
Screening and Quality
Conformance Inspection
QMLV Certified Fabs:
Wilmington, MA
Limerick, Ireland
Santa Clara, CA Die Bank
Cavite, Philippines
Cavite, Philippines
QMLQ Certified Fab
or non-QMLV products
TSMC, Taiwan1
(or any of the above.)
Cavite, Philippines
Cavite, Philippines
Various Foundries
Chelmsford, MA
Chelmsford, MA
Analog Devices, Inc. 7910 Triad Center Drive, Greensboro, NC 27409
3
January 2016
Aerospace Die
The following table lists the standard product available from Analog Devices, Inc. Aerospace Product Line. Product is
also available in accordance with source control drawings. Please contact factory for further information.
Product
Function
X1
Y1
Area
Product
Function
X1
Y1
Area
Notes
AD524S
Instr Amp
103
171
17613
OP12S
Op Amp
50
43
2150
3
AD534S
Multiplier
76
100
7600
3
OP15S
Op Amp
68
56
3808
AD561S
DAC
106
153
16218
3
OP16S
Op Amp
68
56
3808
AD565S
DAC
119
146
17374
3
OP22S
Op Amp
70
50
3500
AD571S
ADC
126
158
19908
3
OP27S
Op Amp
109
55
5995
AD574S
ADC
179
180
32220
3, 4
OP37S
Op Amp
98
56
5488
AD584S
REF
61
80
4880
OP42S
Op Amp
98
70
6860
AD585S
REF
96
124
11904
OP43S
Op Amp
103
74
7622
AD589S
REF
40
60
2400
OP77S
Op Amp
93
57
5301
AD590S
Temp
66
42
2772
OP200S
Dual Amp
120
106
12720
AD648S
Dual Amp
113
67
7571
OP215S
Dual Amp
110
75
8250
3, 4
AD667S
DAC
142
184
26128
3
OP270S
Dual Amp
94
92
8648
3, 4
AD670S
ADC
111
174
19314
3
OP400S
Quad Amp
181
123
22263
3
AD844S
Op Amp
76
95
7220
OP467S
Quad Amp
111
100
11100
AD847S
Op Amp
64
57
3648
OP470S
Quad Amp
163
106
17278
AD8001S
Op Amp
38
41
1558
OP471S
Quad Amp
163
106
17278
AD8041S
Op Amp
42
50
2100
OP484S
Quad Amp
80
110
8800
3, 4
AD8212
I Monitor
46
32
1472
PM108S
Op Amp
43
59
2537
3, 4
Comp
51
42
2142
PM111S
Comp
66
50
3300
Op Amp
47
57
2679
PM139S
Comp
51
48
2448
ADG201S
Switch
58
65
3770
2
PM155S
Op Amp
68
56
3808
ADH141S
Mixer
60
60
3600
3
PM156S
Op Amp
68
56
3808
ADH232S
SPDT SW
41
81
3321
3
REF01S
REF
74
48
3552
ADH346S
A Atten
33
33
1089
3
REF02S
REF
74
48
3552
ADH424S
Dig Atten
33
57
1881
3
REF05S
REF
74
48
3552
ADH463S
LNA
51
120
6120
3
REF10S
REF
74
48
3552
ADH1015S
Mixer
44
45
16539
3
SMP11S
S/H
88
83
7304
AMP01S
Instr Amp
111
149
16539
3
DAC08S
DAC
87
63
5481
3, 4
MAT02S
NPN Trans
61
57
3477
3
MAT03S
PNP Trans
70
60
4200
3
MUX08S
MUX
93
59
5487
OP07S
Op Amp
100
55
5500
3, 4
OP11S
Op Amp
86
72
6192
3
AD8561S
AD8629
Notes
3
3, 4
3, 4
3, 4
3, 4
Notes
1
All dimensions in mils.
2
Not available with wafer lot acceptance. Available as MIL-STD 883
Class B Die plus SEM and M2010 Condition A Visual only.
3
To be offered as Standard Die with class K element evaluation.
4
To be offered with total dose radiation guarantee.
Analog Devices, Inc. 7910 Triad Center Drive, Greensboro, NC 27409
4