SPACE PRODUCTS SELECTION GUIDE 40+ Year History of Supplying High Reliability Space Level Components Analog Devices has an extensive 40 year history of supplying high reliability space components for a wide range of satellite and planetary missions. Our high performance linear, mixed-signal data conversion, and RF devices address a wide range of real-world signal processing applications that range from dc to the far reaches of the RF frequency spectrum. With knowledge, expertise, and access to technologies such as silicon on insulator, bipolar, CMOS, GaAs, SiGe, and InP, Analog Devices provides a unique blend of world-class devices and leading edge capabilities. To address the most challenging applications, our space portfolio is offered in die form with Class K die qualifications as monolithic hermetic devices or as a fully integrated solutions in the form of a system in a package. We support MIL-PRF-38535 for QMLV space grade devices, source controlled drawings for specific customer requirements, and can perform radiation testing for total dose, ELDRS, and single event effects to guarantee product performance in the harsh environment of space. The Analog Devices Space Products Group is dedicated to supporting space flight and satellite applications and is committed to the long-term support of the space market. Our purpose is to provide leading edge, space qualified products and services to customers who require innovative solutions to achieve a competitive position in their markets. Visit analog.com/adef Please visit our website at www.analog.com/adef. 2 Space Products Selection Guide Radiation Testing The Space Products Group understands the requirement for radiation tolerant devices and continues to offer products with total ionizing dose (TID) guaranteed levels. Generic test reports for products with a TID guarantee can be found at www.analog.com/adef. Moving forward with the space community, Analog Devices will offer a number of products that are low dose rate tested. Furthermore, future product offerings will include SEE test data for customer review. Please contact us at [email protected] for the latest radiation information updates. Processing Flows The Space Products Group is committed to releasing state-of-the-art products to meet the rigorous demands of the space market. Products offered are processed and manufactured to meet the space environment needs. Furthermore, all of our space qualified products are assembled and tested at our captive QML Class V qualified facilities. Product offerings include QML Class V devices with radiation qualification and continued support on JAN S products. These products are screened to the guidelines of the MIL-PRF-38535 QML Class V processing flow. Analog Devices also offers products processed through our internal standard space level products program, a lower cost, shorter lead time alternative to source control drawings, if the device is not offered as an SMD or JAN S. The processing of these products is based on the current issue of MIL-PRF-38535 QML Class V. Electrical parameters and screening exceptions (if any) are described in the current revision of the Analog Devices space level data sheet for each part offered. Features of the Analog Devices standard space level products program include the following: XX MIL-PRF-38535 QML Class V certified facilities (fab, assembly, and test) unless otherwise noted on the product data sheet XX Parallel processing that mirrors the QML Class V flow, unless otherwise noted XX Wafer lot acceptance and SEM available on most products XX Wafer lot traceability XX Hot solder dip lead finish as described in MIL-PRF-38535 XX Marking with standard part number, lot seal date code, and Analog Devices logo XX Technology conformance inspection • Group C and Group D generic data may be available • Group C and Group D can be performed at customer’s request XX Product change notification Analog Devices will continue to support devices to specific source control drawings. However, in most cases, the standard Analog Devices space level products should satisfy most customer requirements for full process control, traceability, and reliability through certified manufacturing, assembly, and test lines. Space Grade Dice Offering The Analog Devices Space Products Group provides Class K space qualified chips (dice) on most products, which include die qualification as described in MIL-PRF-38534, Appendix C, Table C-II. Dice are fully traceable to the wafer lot or, if requested, to the individual wafer. All space level die/chips are available only through the Analog Devices Space Products Group located in Greensboro, NC, and franchised distributors. Multichip Modules and Assemblies: Analog Devices is an innovative designer and manufacturer of analog, digital, RF, microwave, and mixed-signal assemblies for instrumentation, space, defense, aerospace, medical, and wireless applications covering dc to 110 GHz. Our unique composite of semiconductor technologies, world class products, and leading edge capabilities allow us to support the most demanding military and space transmitter and receiver modules and assemblies. ADI is a one stop solution provider with the ability to provide custom, high reliability assemblies designed, developed, and manufactured in house from IC level to complex subsystems. ADI’s in-house capability and facilities also include the ability to qualify products to MIL-PRF-38534 as applicable. In doing so, ADI provides unparalleled value and service to our customers through our ability to control cost, performance, schedule, obsolescence, and reliability. Visit analog.com/adef Analog-to-Digital Converters Description Bits Speed (MSPS) Supply (V) Differential Nonlinearity (25°C) Power Dissipation (mW) Interface Package AD670S 8-bit signal conditioning 8 0.1 ±15, ±5 No missing codes 225 Parallel DIP AD9058S 8-bit, dual 50 MSPS 8 50 ±5 ±0.5 LSB 770 Parallel DIP AD9283S 8-bit, 100 MSPS 8 100 3 ±1.25 LSB 115 Parallel LCC AD9054AS 8-bit, 200 MSPS 8 200 5 ±1.5 LSB 700 Parallel LCC AD571S 10-bit complete ADC 10 0.025 +4.5 to +5.5, –13.5 to –16 ±3 LSB 275 Parallel Flatpack, DIP AD574S 12-bit with processor interface 12 0.029 ±12, ±5 No missing codes 725 Byte, parallel Flatpack, DIP AD1671S 12-bit, 1.25 MSPS 12 1.25 ±5 ±1 LSB 750 Parallel Flatpack AD1672S 12-bit, 3 MSPS 12 3 5 ±1.5 LSB 240 Parallel Flatpack AD9042S 12-bit, 41 MSPS 12 41 5 ±2 LSB 595 Parallel Flatpack, DIP AD6645S 14-bit, 80 MSPS 14 80 3.3, 5 ±1.5 LSB 1750 Parallel Flatpack AD9254S 14-bit, 150 MSPS, 1.8 V 14 150 1.8 to 3.3 ±1 LSB 408 Parallel Flatpack AD9246S* 14-bit, 125 MSPS, 1.8 V 14 125 1.8 to 3.3 ±1 LSB 395 Parallel Flatpack Part Number *In development. Digital-to-Analog Converters Description Single or Dual Supply Supply (V) Input Settling Time Integral Nonlinearity (25°C) Power Dissipation (mW) Package DAC08S 8-bit high speed multiplying DAC Dual ±4.5 to ±18 Parallel 135 ns ±0.19% FS 48 Flatpack, DIP, LCC DAC100S 10-bit current output DAC Dual ±6 to ±18 Parallel 375 ns ±0.1% FS 500 DIP AD561S 10-bit current output DAC Dual +5 VCC, –15 VEE Parallel 250 ns ±1 LSB 500 DIP AD9731S 10-bit, 170 MSPS DAC Single ±5 (logic), –5 Parallel 3.8 ns ±1 LSB 439 Flatpack, DIP AD565AS 12-bit current output complete Dual ±15 Parallel 250 ns ±13/4 LSB 345 Flatpack, DIP AD667S 12-bit microprocessor compatible Dual ±12, ±15 Byte, parallel 3 µs ±1/2 LSB 555 Flatpack, DIP AD768S 16-bit, 30 MSPS DAC Dual ±5 Parallel 25 ns ±9 LSB 600 Flatpack, DIP Part Number Clock and Timing Part Number Description Supply (V) Output Frequency (GHz) No. of Inputs No. of Outputs Random Jitter (ps rms) Clock Function Output Logic ADCLK925S Ultrafast SiGe ECL clock/data buffers 3.3 6 1 2 60 fs Clock fanout buffer ECL Interface and Isolation Part Number Description No. of Inputs Side 1 No. of Inputs Side 2 Insulation Rating (V rms) Max Data Rate (Mbps) Propagation Delay (ns) Supply (V) Operating Temperature (°C) ADuM7442S* Quad-channel digital isolator 2 2 1000 25 56 5.5 –55°C to +125°C *In development. 3 4 Space Products Selection Guide Low Offset Operational Amplifiers Description No. of Amps Supply (V) VOS (µV) VOS Drift Input Noise (nV/√Hz ) GBW (MHz) CMRR (dB) Supply (mA) Package Dual, low offset, precision op amp 2 2.7 to 5 ±10 0.06 22 2.5 120 2.2 Flatpack OP27S Low noise, precision op amp 1 ±15 ±25 0.6 4 5 114 4.67 OP07S Ultralow offset voltage op amp 1 ±5, ±20 ±25 0.6 12 0.6 110 4 OP77S Low offset op amp 1 ±3, ±18 ±25 0.6 11 0.4 120 2 OP200S Dual, low offset, low power op amp 2 ±15 ±75 0.5 11 0.5 120 1.45 OP270S Dual, very low noise, precision op amp 2 ±15 ±75 1 11 5 106 6.5 OP400S Quad, low offset, low power op amp 4 ±15 ±150 1.2 22 0.5 120 2.9 OP484S Precision rail-to-rail op amp 4 ±15 ±200 2 3.9 4.5 86 5.8 Flatpack, DIP OP207S Dual, ultralow VOS matched op amp 2 ±15 ±100 1.3 24 0.6 106 8 DIP OP227S Dual, low noise, low offset instrumentation op amp 2 ±15 ±80 1 3.9 5 114 6 Flatpack, DIP OP11S Quad, matched, 741 type op amp 4 ±15 ±500 1 12 3 100 12 Flatpack, DIP OP22S Programmable micropower op amp 1 ±15 ±300 0.75 22 10 100 12.5 Can 1 ±15 ±25 0.6 3 68 114 4.67 Flatpack, can, DIP, LCC 1 ±5, ±15 ±75 0.5 3.8 10 100 3.5 Flatpack 2 ±1.5, ±15 ±300 1.75 3.9 12 64 0.625 Flatpack 2 ±2.5, ±15 ±65 0.25 13 3.6 120 0.650 Flatpack 4 ±1.5, ±15 ±300 1.25 3.9 12 64 0.625 Flatpack Description No. of Amps Supply (V) VOS (µV) Input Bias (nA) Slew (V/µs) CMRR (dB) Supply (mA) Package PM156S Monolithic, JFET input op amp 1 ±5, ±20 ±2000 3.5 10 85 7 Can, DIP PM155S Monolithic, JFET input op amp 1 ±5, ±20 ±2000 3.5 3 85 4 Can, DIP AD648S Dual, precision, low power, BiFET op amp 2 ±18 ±2000 0.02 1 76 0.4 Can, DIP PM108S Low input current op amp 1 ±5, ±20 ±500 2 0.05 96 0.6 Flatpack, can, DIP OP12S Precision, low input current op amp 1 ±15 ±150 2 0.12 104 0.6 Can OP15S Precision, JFET input op amp 1 ±15 ±500 0.05 10 86 4 OP16S Precision, JFET input op amp 1 ±20 ±500 0.05 18 86 7 OP42S High speed, fast settling, precision, JFET input op amp 1 ±15 ±1000 0.2 45 86 6 Can, DIP OP215S Dual, precision, JFET input op amp 2 ±15 ±1000 0.1 10 86 8.5 Can, DIP, LCC Low noise, precision RRO, JFET dual op amp 2 ±15 ±400 0.02 17 100 1.85 Flatpack Part Number AD8629S OP37S AD8671S ADA4084-2S ADA4077-2S ADA4084-4S* Low noise, precision, high speed op amp Low noise, low input bias current op amp Low noise, low power, RRIO dual op amp Low offset and drift, high precision amp Low noise, low power, RRIO quad op amp Flatpack, can, DIP, LCC Flatpack, can, DIP Flatpack, can, DIP, LCC DIP, LCC Flatpack, DIP, LCC Flatpack, DIP, LCC *In development. Low Bias Operational Amplifiers Part Number ADA4610-2S Flatpack, can, DIP Flatpack, can, DIP Visit analog.com/adef High Speed, Low Noise Operational Amplifiers Description No. of Amps Supply (V) VOS (µV) Input Noise (nV/√Hz ) –3 dB (MHz) Slew (V/µs) CMRR (dB) Supply (mA) Package OP471S High speed, low noise quad op amp 4 ±15 ±800 6.5 6.5 6.5 105 11 Flatpack, DIP OP467S Quad, high precision op amp 4 ±15 ±500 6 28 85 76 5.8 Flatpack, DIP OP470S Very low noise quad op amp 4 ±15 ±400 3.2 6 1.4 110 11 Flatpack, DIP No. of Amps Supply (V) VOS (µV) GBW (MHz) Input Noise (nV/√Hz ) Input Bias (nA) Slew (V/µs) CMRR (dB) Supply (mA) 1 ±5 ±5500 350 2 6000 800 50 5.5 1 3, 5, ±5 ±9500 160 16 3400 160 70 6.1 Part Number Wide Bandwidth Operational Amplifiers Part Number Description 800 MHz, 50 mW current feedback op amp 160 MHz rail-to-rail amplifier with disable op amp AD8001S AD8041S Package Flatpack, DIP Flatpack, DIP AD847S High speed, low power op amp 1 ±5, ±15 ±1000 25 15 5000 300 80 5.7 DIP AD844S 60 MHz, 2000 V/µs current feedback op amp 1 ±5, ±15 ±300 60 2 400 2000 70 7.5 DIP, LCC No. of Amps Supply (V) VOS (µV) Slew (V/µs) High Speed/Differential Amplifiers Part Number Description Input Noise (nV/√Hz ) –3 dB (MHz) CMRR (dB) Supply (mA) Package AD8138S Low distortion differential amp 1 ±5 ±2500 1500 17 320 64 21 Flatpack AD8351S Low distortion fully differential amp 1 5 10,000 13,000 2.9 450 35 33 LCC Low Power Amplifiers Part Number Description 30 V, micropower, overvoltage protection, RRIO, dual op amp 30 V, low noise, low power, RRIO, ADA4084-2S dual op amp 30 V, low noise, low power, RRIO, ADA4084-4S* dual op amp ADA4096-2S No. of Amps I/Q Amp (µA) Supply (V) VOS (µV) Input Noise (nV/√Hz ) Input Offset Current (nA) Input Bias Current (nA) Slew Rate (V/µs) 2 60 ±1.5, ±15 ±300 27 1.5 10 0.25 2 650 ±1.5, ±15 ±300 3.9 25 300 2.4 4 650 ±1.5, ±15 ±300 3.9 25 300 2.4 *In development. Comparators Part Number Description Channels Supply (V) Response Time (ns) VOS (mV) Input Offset Current (µA) CMRR (dB) Package Flatpack, DIP AD8561S 7 ns single comparator 1 ±5 9.8 7 ±4 60 PM111S Precision voltage comparator 1 ±15 180 4 ±0.01 90 Can, DIP 70 Flatpack, DIP, LCC PM139S Quad, low power voltage comparator 4 5 to 30, ±18 500 4 ±0.025 Instrumentation Amplifiers Part Number AD524S AMP01S AD8229S Description Precision, monolithic instrumentation amplifier Low noise, precision instrumentation amplifier Low noise instrumentation amplifier Channels Single or Dual Supply Supply (V) Gain Range VOS (µV) Noise (µV p-p) Input Bias Current (nA) Package 1 Dual ±18 1000 250 0.3 ±50 DIP, LCC 1 Dual ±18 10,000 100 13 ±4 Flatpack, DIP, LCC 1 Dual ±15 1000 100 5 ±150 Flatpack 5 6 Space Products Selection Guide Sample-and-Hold Amplifiers Part Number AD585S SMP11S Description Channels Supply (V) Supply Current (mA) PSRR (dB) Acquisition Time (µs) Droop Rate (V/ms) Slew Rate (V/µs) Package 1 ±12, ±15 10 70 3 0.001 10 Flatpack, DIP 1 ±18 7 77 3.5 0.0024 10 DIP High speed, precision sampleand-hold amp Low droop rate, accurate sampleand-hold amp Shunt Monitor Part Number AD8212S AD8210S Description QML High voltage current shunt monitor High voltage current shunt monitor Minimum Common- Maximum Common- Bandwidth Typ (kHz) VCC – VEE (V) Mode Input (V) Mode Input (V) G = 10 Voltage Offset (mV) Supply Current Package R 7 65 1000 7 to 65 ±2 720 µA Flatpack R –2 65 450 5 ±1.8 2 mA Flatpack Voltage References Description VOUT (V) Accuracy (%) Supply (V) TC (ppm/°C) Noise (µV p-p) Package Precision, 1.2 V IC reference 1.2 1.2 Shunt type reference 50 5 Can Part Number AD589S 2.5 V, low power, precision voltage reference Pin-programmable, precision voltage reference 5 V, precision, voltage reference/ temperature transducer 2.5 0.02 4.5 to 40 15 4 Flatpack, can, DIP, LCC 2.5, 5, 7.5, 10 programmable 0.05 4.5 to 30 15 50 Can 5 0.15 7 to 40 8.5 10 Flatpack, can, DIP, LCC REF05S 5 V, precision voltage reference 5 0.15 15 8.5 15 Flatpack, can, DIP, LCC REF01S 10 V, precision voltage reference 10 0.3 12 to 40 8.5 30 Flatpack, can, DIP, LCC REF10S 10 V, precision voltage reference 10 0.15 15 8.5 30 Flatpack, can, DIP, LCC AD780S 2.5 V/3 V, precision voltage reference 2.5/3 0.04 4 to 36 3 4 Flatpack REF43S AD584S REF02S Analog Switches Description Channels Supply (V) RON Total Switching Time (ns) Power Dissipation (mW) Switch Type Package ADG201S LCMOS high speed quad SPST switch 4 ±15 300 100 240 SPST DIP SW201S Quad, SPST, JFET analog switch 4 ±15 75 100 470 SPST DIP Part Number Muxes Part Number MUX08S AD8182S Description 8-channel/dual 4-channel, JFET analog multiplexer Dual 2:1 buffered 10 ns switching multiplexer Channels Supply (V) RON Break-Before-Make Delay (ns) Power Dissipation (mW) Mux Type Package 8 ±15 300 0.8 500 Single ended DIP, LCC 2 ±5 N/A N/A 40 Single ended Flatpack Visit analog.com/adef Matched Pair Transistors Part Number Description Offset Voltage (µV) Offset Voltage Tempco (µV/°C) Noise Voltage Density (nV/√Hz ) Breakdown Voltage Package 50 0.3 2 0.1 Can 100 0.5 2 0.1 Flatpack, can Low noise, matched dual NPN transistor Low noise, matched dual PNP transistor MAT02S MAT03S Multiplier Part Number AD534S Description BW Output Offset Voltage Drift Multiplier Drift Input Offset Current Output Voltage Swing (V) Package Internally trimmed precision IC multiplier 1 MHz ±300 µV/°C ±0.01%/°C ±2 µA ±11 Can, DIP Analog Front End Part Number AD9814S Description Resolution (Bits) Sample Rate (MSPS) Power Dissipation (mW) INL (LSB) DNL (LSB) Package 14-bit, 3-channel CCD signal processor 14 10 450 11 1.25 Flatpack Temperature Transducer Part Number AD590S Description 25°C Temperature Error (°C) Sensor Output Supply Voltage Range (V) Package 2-terminal IC temperature transducer ±2.5 1 µA/K 4 to 30 Flatpack, can, DIP Resolver-to-Digital Converter Part Number AD2S80S Description Resolution (Bits) Accuracy (Arcmin) Reference Frequency Interface Power Dissipation (mW) Supply (V) Package Variable resolver-todigital converter 16 ±8 50 Hz to 20 kHz Parallel 300 ±12 DIP Voltage-to-Frequency Converter Part Number AD537S AD652S Description Voltage-to-frequency converter Voltage-to-frequency converter Architecture No. of Channels Input Voltage Range Full-Scale fOUT (kHz) Reference Voltage Gain Drift (ppm/°C) Supply (V) Package Nonsynchronous 1 ±11 150 5 ±250 ±5 to ±18 DIP Synchronous 1 ±10 2500 5 ±50 ±6 to ±18 DIP Variable Gain Amplifiers Part Number AD8367S Description QML RF Frequency (MHz) Gain Range (dB) Gain Scaling Factor (mV/dB) Gain Conformance (dB) Supply Voltage (V) Supply Current (mA) Package 500 MHz variable gain amplifier with on-chip square law detector R703 10 to 500 –2.5 to +42.5 20 ±0.5 2.7 to 5 30 Flatpack 7 8 Space Products Selection Guide RF and Microwave Space Qualified Class S and Class K Solutions Logarithmic Amplifiers Part Number AD8306S ADL5513S Description RF Frequency (MHz) Dynamic Range (dB) Temperature Stability (dB) Response Time (ns typ) Voltage Supply (V) Supply Current (mA) Package 5 to 400 100 ±1 73 2.7 to 5.5 16 Flatpack 1 to 4000 80 ±0.5 20 2.7 to 5.5 31 Flatpack 5 MHz to 400 MHz, 100 dB, high precision limiting-logarithmic amplifier 1 MHz to 4 GHz, 80 dB logarithmic detector/controller RF Power Detectors Part Number ADL6010S* ADL5513S AD8306S ADL5501 RF Frequency (MHz) Description Response Time Dynamic Range Voltage Supply (ns) (dB) (V) Temperature Stability Supply (mA) Package Fast responding, 45 dB range, envelope detector Logarithmic detector/controller High precision, limiting logarithmic amplifier 500 MHz to 40 GHz 10 40 4.75 to 5.25 0.25 3 Flatpack 1 to 4000 20 80 2.7 to 5.5 0.5 31 Flatpack 5 to 400 73 100 2.7 to 6.5 1 16 Flatpack RMS power detector 6000 6 µs 30 3 to 5 — 1.5 Flatpack Description Function RF Frequency (MHz) I/Q Frequency (MHz) Voltage Supply (V) Max Supply Current (mA) Standby Supply Current (µA) Package 2.5 GHz direct conversion quadrature modulator Mod 800 to 2500 70 2.7 to 5.5 55 20 Flatpack *In development. Modulator Part Number AD8346S PLL Part Number ADF4108S Description QML RF Frequency (GHz) Normalized Phase Noise (dBc/Hz) Max REFIN Frequency (MHz) RF Prescaler PLL frequency synthesizer L703 7 –223 250 16/17, 32/33, 64/65, 8/9 Supply Voltage Supply Current (V) (mA) 3.2 to 3.6 15 Package Flatpack Amplifiers Part Number Frequency Range (GHz) Product Description Gain (dB) OIP3 (dBm) NF (dB) P1dB (dBm) Package ECCN Code ADH395S* DC to 4 Gain block 15+ 28 4.5 15 G8 EAR99 ADH313S* DC to 6 Gain block 17 27 6.5 14 G8 EAR99 ADH463S* 2 to 20 Wideband LNA with AGC 14 28 2.5 16 Chip EAR99 ADH499S* 21 to 32 Medium PA 16 33 5 24 Chip 3A001.b.2.d *Contact factory for the space version. Visit analog.com/adef Attenuators Part Number Frequency Range (GHz) Product Description Insertion Loss (dB) Attenuation Range (dB) Control Input (VDC) IIP3 (dBm) Package ECCN Code ADH429S* DC to 3 6-bit digital 3 0.5 to 31.5 32 0/–5 G16 EAR99 ADH792S* DC to 6 6-bit digital 1.8 0.25 to 15.75 55 TTL/CMOS Chip EAR99 ADH346S* DC to 8 Analog VVA 2 0 to 30 10 0 to –3 G8 EAR99 ADH424S* DC to 13 6-bit digital 4 0.5 to 31.5 32 0/–5 Die EAR99 ADH346S* DC to 20 Analog VVA 2.2 0 to 25 10 0 to –3 Die EAR99 *Contact factory for the space version. Mixers Part Number RF Frequency (GHz) ADH207S* 0.7 to 2 ADH128S* 1.8 to 5 ADH1048S* 2 to 18 ADH141S* 6 to 18 ADH329S* 25 to 40 ADH1015S* 26 to 32 Product Description IF Frequency (GHz) Conversion Gain (dB) LO/RF Isolation (dB) IIP3 (dBm) Package ECCN Code DC to 0.3 –9 45 17 G8 EAR99 DC to 2 –10 40 18 G8 EAR99 DC to 4 –10 35 19 Chip EAR99 DC to 6 –10 25 21 Die EAR99 DC to 8 –9.5 42 19 Chip EAR99 16 to 22 –10 45 22 Die EAR99 10 LO, double balanced 15 LO, double balanced Double balanced 15 dBm LO, double balanced 13 LO, double balanced 13 dBm LO, triple balanced *Contact factory for the space version. Frequency Multiplier Part Number RF Frequency (GHz) Product Description Output Frequency (GHz) Input Power (dBm) Output Power (dBm) 100 kHz SSB Phase Noise (dBc/Hz) Package ECCN Code ADH561S* 4.0 to 10.5 ×2 Active 8 to 21 5 17 –139 Chip EAR99 *Contact factory for the space version. Phase Shifter Part Number SRF Frequency (GHz) Product Description Insertion Loss (dB) Phase Range (°) 2nd Harmonic Pin = –10 dBm (dBc) Control Voltage Range (VDC) Package ECCN Code ADH936S* 1.2 to 1.4 6-bit digital 4 5.625 to 360 45 0/5 G24 EAR99 *Contact factory for the space version. Switches Part Number Frequency Range (GHz) Product Description Insertion Loss (dB) Isolation (dB) Input P1dB (dBm) Control Input (VDC) Package ECCN Code EAR99 ADH344S* DC to 4 SP4T 2 40 21 0/–5 G16 ADH244S* DC to 4 SP4T 0.7 40 25 TTL/CMOS G16 EAR99 ADH232S* DC to 6 SPDT, high isolation 1.4 43 26 0/–5 G8 EAR99 DC to 6 SPST, high isolation 1.4 52 27 0/–5 G7 EAR99 SP4T 1.8 42 27 0/–5 LH5 EAR99 ADH231S* ADH344S* DC to 12 ADH232S* DC to 15 SPDT, high isolation 1.4 50 26 0/–5 Die EAR99 ADH347S* DC to 20 SPDT, high isolation 1.7 45 23 0/–5 Chip EAR99 *Contact factory for the space version. 9 10 Space Products Selection Guide Space Level Heritage We have custom upscreened many RF and microwave solutions to MIL-PRF-38535 Class S, NASA EEE-INST-002, and customer specific requirements. Parts have been provided as die, chip-in-a-package, and complex hybrid designs. Below is an extensive list of generic parts that we have provided to our customers for space flight. Technology Products GaAs HBT GaAs MESFET Amplifiers HMC313, HMC395, HMC397, HMC431 Amplifiers HMC392 Frequency Dividers HMC361, HMC363, HMC365, HMC437, HMC438, HMC439 Attenuators (Digital) HMC290, HMC306, HMC335, HMC424, HMC425, HMC470, HMC473 Frequency Detectors HMC440 Attenuators (VVA) HMC346, HMC712 Frequency Multipliers HMC443 Frequency Multipliers HMC205 PLOs HMC698 Mixers HMC128, HMC129, HMC130, HMC141, HMC142,* HMC143, HMC207A, HMC213A, HMC220, HMC258, HMC260, HMC292, HMC329, HMC422, HMC423, HMC553, HMC557, HMC773, HMC774, HMC1015 VCOs HMC358, HMC384, HMC386, HMC391, HMC416, HMC430, HMC431, HMC508, HMC510, HMC511, HMC512, HMC530, HMC531, HMC586 *Contact factory for the space version. Products SiGe BiCMOS SiGe HBT Amplifiers HMC471, HMC476, HMC479, HMC482 Comparators HMC675 Frequency Dividers HMC862 Fanout Buffers HMC987 Modulators HMC495 PLL HMC703 Amplifiers HMC263, HMC441, HMC442, HMC451, HMC462, HMC463, HMC465, HMC498, HMC499, HMC516, HMC517, HMC519, HMC566, HMC605, HMC616,* HMC715, HMC870, HMC871, HMC903, HMC-ALH216, HMC-ALH376, HMC-ALH444 Attenuators HMC941 Frequency Multipliers HMC448 Mixers HMC264 Phase Shifters HMC936 Switches HMC849A Modulators HMC135 Switches HMC183, HMC231, HMC232, HMC244, HMC252, HMC276, HMC322, HMC344, HMC347, HMC427, HMC607 Technology GaAs PHEMT Visit analog.com/adef Space Assemblies Our family of space qualified synthesizers is based upon the successful HMC-C070 MicroSynth.® This module uses a number of our frequency generation devices including the HMC700 series integer-N/fractional-N PLLs. The module can be designed to accommodate different frequency ranges and digital control protocols. Analog Devices microwave products can meet stringent size, weight, and performance requirements of any synthesizer over any frequency range up to Ku-band. State-of-the-art, ultraminiature upconverter or downconverter modules can be designed with our extensive line of mixers, frequency multipliers, and amplifiers. Suitable filters are integrated to achieve the overall frequency response and spurious rejection. These assemblies can be provided from S band to Ka-band depending on the customer’s requirements. Space qualified MicroSynth.® Converter assembly. 11 Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Japan Headquarters Analog Devices, Inc. Asia Pacific Headquarters Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6 80807 Munich Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China 201203 Tel: 86.21.2320.8000 Fax: 86.21.2320.8222 ©2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Ahead of What’s Possible is a trademark of Analog Devices. G09366-0-9/15(E) analog.com/adef