LL103A, LL103B, LL103C www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • Integrated discharge protection ring against static • Low capacitance • Low leakage current • Low forward voltage drop • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: MiniMELF SOD-80 Weight: approx. 31 mg APPLICATIONS Cathode band color: black • HF-detector Packaging codes/options: • Protection circuit GS18/10K per 13" reel (8 mm tape), 10K/box • Small battery charger GS08/2.5K per 7" reel (8 mm tape), 12.5K/box • AC-DC/DC-DC converters PARTS TABLE PART TYPE DIFFERENTATION ORDERING CODE INTERNAL CONSTRUCTION REMARKS LL103A VR = 40 V LL103A-GS08 or LL103A-GS18 Single diode Tape and reel LL103B VR = 30 V LL103B-GS08 or LL103B-GS18 Single diode Tape and reel LL103C VR = 20 V LL103C-GS08 or LL103C-GS18 Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage PART SYMBOL VALUE UNIT LL103A VR 40 V LL103B VR 30 V LL103C VR 20 V IFAV 200 mA Forward continuous current Peak forward surge current tp = 300 μs, square pulse Power dissipation IFSM 15 A Ptot 400 mW THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range Rev. 1.7, 18-Dec-13 TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 250 K/W Tj 125 °C Tstg - 65 to + 150 °C Document Number: 85630 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL103A, LL103B, LL103C www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse breakdown voltage IR = 50 μA VR = 30 V Leakage current PART SYMBOL MIN. LL103A V(BR) 40 V Diode capacitance Reverse recovery time MAX. UNIT V LL103B V(BR) 30 LL103C V(BR) 20 LL103A IR 5 μA μA V VR = 20 V LL103B IR 5 VR =10 V LL103C IR 5 μA VF 370 mV 600 mV IF = 20 mA Forward voltage drop TYP. IF = 200 mA VF VR = 0 V, f = 1 MHz CD 50 pF IF = IR = 50 mA to 200 mA, recover to 0.1 IR trr 10 ns TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 10 000 I R - Reverse Current (µA) IF - Forward Current (mA) 100 10 1 0.1 0.01 1000 100 Reverse voltage LL103A VR = 30 V LL103B VR = 20 V LL103C VR = 10 V 10 1 0.001 0 0 100 200 300 400 500 600 700 800 900 1000 20 16767_1 VF - Forward Voltage (mV) 16765 Fig. 1 - Forward Current vs. Forward Voltage 40 60 80 100 120 140 160 T j - Junction Temperature (°C) Fig. 3 - Reverse Current vs. Junction Temperature 30 5 CD - Diode Capacitance (pF) IF - Forward Current (A) f = 1 MHz 4 3 2 1 25 20 15 10 5 0 0 0.0 16766 0.5 1.0 1.5 VF - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Rev. 1.7, 18-Dec-13 0 2.0 16768 5 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Document Number: 85630 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL103A, LL103B, LL103C www.vishay.com Vishay Semiconductors Itot - Typ. Non Repetitve Forward Surge Current (A) 25 20 15 10 5 0 0.1 16769 1.0 10.0 tP - Pulse width (ms) Fig. 5 - Typical Non-Repetitive Forward Surge Current vs. Pulse Width PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.7, 18-Dec-13 Document Number: 85630 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000