PHOTOSENSOR MODULES H10720/H10721 SERIES OVERVIEW The H10720 and H10721 series are photosensor modules containing a metal package PMT and a high-voltage power supply circuit. The built-in PMT uses a metal package with the same diameter as a TO-8 metal package used for semiconductor photodetectors. Despite the small size nearly equal to photodiodes, this PMT delivers high gain, wide dynamic range, and high-speed response. Six types of products are available with different sensitivity characteristics such as spectral response ranges. Hamamatsu also provides "P" type with low dark count selected for photon counting measurement. The H10720 series are pin output type, while the H10721 are flexible cable output type. PRODUCT VARIATIONS ●Pin output type (On-board type) Type No. H10720-110 / H10720P-110 H10720-113 / H10720P-113 H10720-210 / H10720P-210 H10720-01 / H10720P-01 H10720-04 / H10720P-04 H10720-20 Spectral response 230 nm to 700 nm 185 nm to 700 nm 230 nm to 700 nm 230 nm to 870 nm 185 nm to 870 nm 230 nm to 920 nm Photocathode Super bialkali Super bialkali Ultra bialkali Multialkali Multialkali Exteded red multialkali Window material Borosilicate glass UV glass Borosilicate glass Borosilicate glass UV glass Borosilicate glass Spectral response 230 nm to 700 nm 185 nm to 700 nm 230 nm to 700 nm 230 nm to 870 nm 185 nm to 870 nm 230 nm to 920 nm Photocathode Super bialkali Super bialkali Ultra bialkali Multialkali Multialkali Exteded red multialkali Window material Borosilicate glass UV glass Borosilicate glass Borosilicate glass UV glass Borosilicate glass Notes P Type: For photon counting ●Cable output type Type No. H10721-110 / H10721P-110 H10721-113 / H10721P-113 H10721-210 / H10721P-210 H10721-01 / H10721P-01 H10721-04 / H10721P-04 H10721-20 Notes P Type: For photon counting This product can't be used at vacuum environment or reduced pressure environment. Figure 1: Typical spectral response TPMOB0224EC 1000 -210 -113 100 -110 10 1 0.1 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) CATHODE RADIANT SENSITIVITY (mA/W) CATHODE RADIANT SENSITIVITY (mA/W) 1000 TPMOB0225EB -20 100 -04 10 -01 1 0.1 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K. PHOTOSENSOR MODULES H10720/H10721 SERIES Figure 2: Schematic diagram PMT LIGHT SIGNAL OUTPUT (CURRENT OUTPUT) HIGH VOLTAGE POWER SUPPLY CIRCUIT LOW VOLTAGE INPUT (+3 V to +5 V) GND Vref OUTPUT (+1.2 V) Vcont INPUT (+0.5 V to +1.1 V) (INPUT IMPEDANCE: 1 MΩ) TPMOC0261EA SPECIFICATIONS Parameter Anode Standard Type Cathode Suffix Input Voltage Max. Input Voltage Max. Input Current *1 Max. Output Signal Current *2 Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Typ. Typ. Red / White Ratio Typ. Radiant Sensitivity *3 Min. 2 Luminous Sensitivity * Typ. Typ. Radiant Sensitivity *2 *3 Typ. Dark Current *2 *4 Max. Typ. 2 4 P Type Dark Count * * Max. Rise Time *2 Max. Ripple Noise *2 *5 (peak to peak) Max. Settling Time *6 Operating Ambient Temperature *7 Storage Temperature *7 Typ. Weight -110, -113 400 80 105 13.5 — 110 80 210 2.2 × 105 1 10 50 100 H10720 / H10721 Series -01, -04 -210 +2.8 to +5.5 +5.5 2.7 100 +1.1 (Input Impedance 1 MΩ) +0.5 to +1.1 (Input Impedance 1 MΩ) 8 400 400 100 100 200 135 — 15.5 0.2 — 77 130 100 100 400 270 1.5 × 105 2.6 × 105 1 1 10 10 50 600 100 1000 0.57 0.3 10 +5 to +50 -20 to +50 45 (H10720 Series), 80 (H10721 Series) -20 630 350 500 — 0.45 78 350 1000 1.5 × 105 10 100 — — *1: At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current *2: Control voltage = +1.0 V *3: Measured at the peak sensitivity wavelength *4: After 30 minutes storage in darkness. *5: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF *6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7: No condensation Figure 3: Sensitivity adjustment method VOLTAGE PROGRAMMING SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) • Adjust the control voltage to adjust the sensitivity. • Electrically insulate the reference voltage output. POWER SUPPLY +5 V GND +0.5 V to +1.1 V GND POWER SUPPLY PHOTOSENSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) +5 V GND CW PHOTOSENSOR MODULE RESISTANCE PROGRAMMING MONITOR POTENTIOMETER (10 kΩ) * When using a potentiometer, adjust sensitivity while monitoring the control voltage so it does not exceed +1.1 V. TPMOC0231EB (at +25 °C) Unit — V V mA µA V V mm nm µA/lm — — mA/W A/lm A/W nA s-1 ns mV s °C °C g Figure 4: Typical gain 107 Figure 5: Output current v.s. input current TPMOB0226EB 10 TPMOB0273EA INPUT VOLTAGE: +5 V CONTROL VOLTAGE: +1.0 V INPUT CURRENT (mA) 8 GAIN 106 105 6 4 2 104 0 0 20 40 60 80 100 OUTPUT CURRENT (µA) 103 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 CONTROL VOLTAGE (V) Figure 6: Ripple noise TPMOB0274EA RIPPLE NOISE (1 mV/div.) LOAD RESISTANCE: 1 MΩ LOAD CAPACITANCE: 22 pF CONTROL VOLTAGE: +1.0 V 2 (µs/div.) Figure 7: DC linearity ●H1072x-110/H1072x-210/H1072x-113 ●H1072x-01/H1072x-20/H1072x-04 TPMOB0275EA TPMOB0276EA 20 20 10 Vcont = +1.0 V Vcont = +1.0 V 0 LINEARITY (%) LINEARITY (%) 10 -10 -20 0 -10 -20 Vcont = +0.5 V Vcont = +0.5 V -30 -30 -40 0.1 1 10 100 1000 OUTPUT CURRENT (µA) TPMOB0277EA 20 WIDTH: 500 ns REPETITION RATE: 1 kHz 10 LINEARITY (%) Vcont=+1.0 V 0 -10 Vcont=+0.5 V -30 -40 0.1 1 10 OUTPUT CURRENT (mA) 1 10 OUTPUT CURRENT (µA) Figure 8: Pulse linearity -20 -40 0.1 100 1000 100 1000 PHOTOSENSOR MODULES H10720/H10721 SERIES Figure 10: Dimensional outlines (Unit: mm) H10720 Series H10721 Series 50.0 ± 0.5 12 ± 1 18.0 ± 0.5 1.5 ± 0.2 11 15.24 50.0 ± 0.5 14.0 ± 0.2 23 76 54 THREADED HOLE for OPTION * (4 × M2 DEPTH 3) BOTTOM VIEW TOP VIEW 1NO CONNECTION 10 2Vref OUTPUT (+1.2 V) 3Vcont INPUT (+0.5 V to +1.1 V) 4LOW VOLTAGE INPUT (+5 V) WINDOW 5GND 6SIGNAL GND 7SIGNAL OUTPUT 8NO CONNECTION 1 Weight: 45 g WINDOW EFFECTIVE AREA ( 8 MIN.) THREADED HOLE for OPTION * (4 × M2 DEPTH 4) FRONT VIEW SIDE VIEW LOW VOLTAGE INPUT (+5 V) : AWG26 (RED) GND : AWG26 (BLACK) Vref OUTPUT (+1.2 V) : AWG26 (BLUE) Vcont INPUT (+0.5 V to +1.1 V) : AWG26 (WHITE) SIGNAL OUTPUT : RG-174/U Weight: 80 g *Option: E5776, E5776-51, A9865, A10030-01 *Option: E5776, E5776-51, A9865, A10030-01 SIDE VIEW 450 ± 20 1.5 ± 0.2 10 1 8 14.0 ± 0.2 15.24 EFFECTIVE AREA ( 8 MIN.) 22.0 ± 0.5 12.7 5.08 17.78 5.08 14.0 ± 0.2 25.0 ± 0.5 14.0 ± 0.2 TPMOA0062EA TPMOA0061EB OPTION OPTICAL FIBER ADAPTER E5776 / E5776-51 E5776 (FC Type) E5776-51 (SMA Type) 22.0 ± 0.5 22.0 ± 0.5 14.0 ± 0.2 12.0 ± 0.2 14.0 ± 0.2 0.5 4 × 2.2 SMA 4 × 2.2 FC-R FRONT VIEW 3.18 FRONT VIEW SIDE VIEW * Supplied with M2 screws(4pcs) for fixing to module TACCA0055EB 0.5 GASKET (Supplied) 14.0 ± 0.2 14.0 ± 0.2 GASKET (Supplied) 16.2 ± 0.2 SIDE VIEW * Supplied with M2 screws(4pcs) for fixing to module TACCA0239EB C-MOUNT RING A9865 GASKET (Supplied) C-MOUNT 14 9 30 4 × 2.1 14 4 × 3.2 * Supplied with M2 screws(4pcs) for fixing to module 5.0 7.0 0.5 TPMOA0056EB RELATED PRODUCT POWER SUPPLY FOR PHOTOMULTIPLIER TUBE MODULES C10709 The C10709 is the power supply for photomultiplier tube modules which has 5 V input voltage. This unit can provide both the driving voltage and the control voltage. This feature enables users to operate the modules easily. Parameter Output Voltage Output Current Max. Control Voltage A (variable voltage range) Input Voltage Description / Value ±5 2.0 (+5 V), 0.2 (-5 V) +0.25 to +1.8 AC100 to AC240 Unit V A V V NOTE: AAdjust within the recommended control voltage range for the photomultiplier tube module being used. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TPMO1062E01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] DEC. 2015. IP China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]