Download

SAK-Series TS 32
Contents
SAK-Series TS 32
SAK-Series TS 32
Feed-through terminal
TS 32 / PA
B.2
TS 32 / KrG
B.6
B
Two-tier modular terminals
TS 32 / PA
B.10
Modular PE terminals
TS 32 / PA
B.12
TS 32
B.14
Disconnect terminals
TS 32 / PA
B.16
TS 32 / KrG
B.18
Fuse terminals
TS 32 / PA
B.20
TS 32 / KrG
B.22
Fuse inserts and gauge rings for Weidmüller fuse terminals
B.26
Terminals with spring-loaded cable clamps
TS 32
B.28
Test-disconnect terminals
TS 32 / KrG
B.30
Terminals for temperature measuring circuits
TS 32 / PA
B.34
Terminals with screw-less connections
With push-on connection TS 32 / PA
B.36
With Termi-Point / Wire-Wrap connection TS 32 / PA
B.38
With solder connection TS 32 / PA
B.39
With push-on connection TS 32 / KrG
B.42
With solder connection TS 32 / KrG
B.45
Special terminals – SAKG
TS 32 / KrG
B.46
Stud terminal – KST
TS 32 / PA
B.54
Terminals with electronic components
With indication
B.56
With diodes
B.58
With electronic components
B.61
Earth conductor isolating terminals
B.62
B.1
SAK-Series TS 32
Feed-through terminal
SAKD 2.5N
TS 32 / PA
2.5 mm²
SAK 2.5
2.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Note
5 x 32.5 x 43.5
30 / 4
0.08...4
6 x 36.5 x 46.5
41 / 6
0.13...6
IEC 60947-7-1
IEC 60947-7-1
IEC
500
24
2.5
UL
CSA
300
300
20
20
AWG 28...12 AWG 22...12
6/3
A2 / V2
Ex e II
IEC
800
24
2.5
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
20
25
21
AWG 22...12 AWG 26...10
2.5
8/3
A3 / V2
KEMA 97ATEX1798 U
?ru#ia
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...4
0.4...0.6 Nm (M 2.5)
10 / 0.6 x 3.5 mm
?ru#~a
Rated connection
0.5...4 / 0.5...2.5
0.5...4 / 0.5...2.5
0.4...0.6 Nm (M 2.5)
10 / 0.6 x 3.5 mm
0.5...0.75
0.5...0.75 / 0.5...0.75
0.5...1.5
0.5...1.5
With twin ferrules ZH 0.5 to ZH 1.5, rated voltage is 690 V.
With twin ferrules ZH 0.5 to ZH 1.5, rated voltage is 690 V.
Type
Qty.
Order No.
Type
Qty.
Order No.
SAKD 2.5N
100
0215560000
SAK 2.5
100
0279660000
SAKD 2.5N BL
100
0215580000
SAK 2.5 BL
100
0279680000
Ordering data
Version
beige
Blue
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 SAKD2.5N
24 A
50
0367800000
Q 2 SAK2.5
41 A
50
0337000000
Order No.
3-pole
Q 3 SAKD2.5N
24 A
50
0367900000
Q 3 SAK2.5
41 A
50
0337100000
4-pole
Q 4 SAKD2.5N
24 A
50
0368000000
Q 4 SAK2.5
41 A
50
0337200000
10-pole
Q 10 SAKD2.5N
24 A
20
0368100000
Q 10 SAK2.5
41 A
20
0368700000
20
0180400000
PS 2.3 RT
20
0180400000
50
0215700000
STB 8.5/5/2.3/M3 SAK2.5
50
0280600000
Connecting sleeve
Mounting screw
Lock washer
Switchable link
Switchable link
Connecting sleeve
Mounting screw
Width
Testing / Checking
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
Width
5.4 mm
End plate / Partition plate
beige
Blue
beige
Blue
AP SAKD2.5N
1.5 mm
20
0150960000
AP SAK2.5
1.5 mm
20
0279560000
AP SAKD2.5N BL
1.5 mm
20
0150980000
AP SAK2.5 BL
1.5 mm
20
0279580000
TW SAKD2.5N
1.5 mm
20
0191860000
TW SAK2.5
2.5 mm
20
0302860000
TW SAKD2.5N BL
1.5 mm
20
0191880000
TW SAK2.5 BL
1.5 mm
20
0302880000
5 mm
100
0366860000
TSCH 1
2 mm
100
0319160000
50
0297900000
100
0128900000
Small partition
Small partition
TSCH 3 SAKD2.5 N
Cover / warning label
AD 3 SAK2.5
Cover / warning label
BFSC M3X22 PA/RT
Mounting screw (plastic)
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.2
DEK 5/5 / SCHT 7
DEK 5/6 / SCHT 7
SAK 4
4 mm²
6.5 x 40 x 51.5
41 / 6
0.13...6
SAK 6 N
6 mm²
8 x 40 x 51.5
57 / 10
0.33...10
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
20
36
28
AWG 22...12 AWG 26...10
4
8/3
A4 / V2
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
SAK 10
10 mm²
B
10 x 40 x 51.5
76 / 16
1.5...16
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
40
47
36
AWG 22...8
AWG 20...8
6
8/3
A5 / V2
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
0.5...10 / 0.5...6
0.5...10 / 0.5...6
0.8...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
IEC 60947-7-1
Ex e II
IEC
800
57
10
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
60
65
50
AWG 14...6
AWG 16...6
10
8/3
B6 / V2
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
1.5...10 / 1.5...16
1.5...16 / 1.5...10
2.0...4.0 Nm (M 4)
12 / 1.0 x 5.5 mm
1.5...1.5
0.5...1.5
With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V.
For AWG 8-7 and AWG 8-19, tightening torque is 1.2­1.4 Nm
When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V.
Type
Qty.
Order No.
Type
Qty.
Order No.
Type
Qty.
Order No.
SAK 4
100
1716240000
SAK 6N
100
0193260000
SAK 10
100
0110060000
SAK 4 BL
100
0128380000
SAK 6N BL
100
0193280000
SAK 10 BL
100
0110080000
Type
With AWG 6 and H07V-R10 conductors, an increased MD torque of 1.4
to1.6 Nm should be used.
A higher torque of 2 to 2.4 Nm is necessary when using H07V-R16 and
AWG 6 conductors.
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
Q 2 SAK4
41 A
50
0336700000
Q 2 SAK6N
32 A
50
0456700000
Q 2 SAK10
57 A
50
0457100000
Q 3 SAK4
41 A
50
0336800000
Q 3 SAK6N
57 A
50
0456800000
Q 3 SAK10
57 A
50
0457200000
Q 4 SAK4
41 A
50
0336900000
Q 4 SAK6N
57 A
50
0456900000
Q 4 SAK10
57 A
50
0457300000
Q 10 SAK4
41 A
20
0368800000
Q 10 SAK6N
32 A
20
0457000000
Q 10 SAK10
57 A
20
0457400000
VL 2 SAK4
32 A
50
0197000000
VL 2 SAK6/10/SAKB
32 A
50
0135900000
VL 2 SAK6/10/SAKB
50
0135900000
50
0285100000
VH 19/5/3.5 SAK4-16
50
0285100000
VH 19/5/3.5 SAK4-16
50
0285100000
100
0292500000
BFSC M3X25
100
0292500000
BFSC M3X25
100
0292500000
20
0299600000
50
0169900000
VH 19/5/3.5 SAK4-16
BFSC M3X25
Width
PS 4 F.STB 4
7.6 mm
STB 14/D5/2.3/M3 SAK2.5
Width
20
0299600000
PS 4 F.STB 4
50
0168600000
STB 14/D6/4/M3 SAK10
7.6 mm
Order No.
Width
20
0299600000
PS 4 F.STB 4
50
0169900000
STB 14/D6/4/M3 SAK10
7.6 mm
AP SAK4-10
1.5 mm
20
0117960000
AP SAK4-10
1.5 mm
20
0117960000
AP SAK4-10
1.5 mm
20
0117960000
AP SAK4-10 BL
1.5 mm
20
0117980000
AP SAK4-10 BL
1.5 mm
20
0117980000
AP SAK4-10 BL
1.5 mm
20
0117980000
TW 4 SAK4-10
1.5 mm
20
0130160000
TW 4 SAK4-10
1.5 mm
20
0130160000
TW 4 SAK4-10
1.5 mm
20
0130160000
TW 4 SAK4-10 BL
1.5 mm
20
0130180000
TW 4 SAK4-10 BL
1.5 mm
20
0130180000
TW 4 SAK4-10 BL
1.5 mm
20
0130180000
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
50
0285300000
AD 4 SAK6N
50
0196600000
AD 4 SAK10
50
0178600000
100
0128900000
BFSC M3X22 PA/RT
100
0128900000
BFSC M3X22 PA/RT
100
0128900000
TSCH 1
AD 4 SAK4
BFSC M3X22 PA/RT
DEK 5/6,5
DEK 5/8 / SCHT 7
SAK-Series TS 32
Feed-through terminal
DEK 5/5
When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V.
B.3
SAK-Series TS 32
Feed-through terminal
SAK 16
TS 32 / PA
16 mm²
SAK 35
35 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
12 x 50 x 57.5
76 / 16
2.5...16
18 x 58 x 67.5
150 / 50
2.5...50
IEC 60947-7-1
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Note
Ex e II
IEC
1000
76
16
T
II 2 G D
UL
CSA
EN 60079-7
600
600
690
80
87
66
AWG 12...4
AWG 14...6
16
8/3
B6 / V2
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
2.5...10 / 4...16
4...16 / 4...16
2.0...4.0 Nm (M 4)
15 / 1.0 x 5.5 mm
IEC 60947-7-1
Ex e II
IEC
1000
125
35
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
105
145
109
AWG 12...2
AWG 12...2
35
8/3
B8 / V2
KEMA 97ATEX1798 U
?ru#~a
Rated connection
2.5...16 / 4...50
2.5...35 / 2.5...35
4.0...5.0 Nm (M 6)
18 / 6.5 x 1.2 mm
2.5...10 / 10...16
2.5...16 / 2.5...16
Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
Ordering data
Version
Type
beige
Blue
Note
Order No.
Type
SAK 16
Qty.
50
0271060000
SAK 35
Qty.
20
0303560000
Order No.
SAK 16 BL
50
0271080000
SAK 35 BL
20
0303580000
If QIs are aligned side by side, then a TW/AP must be used.
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
Type
Accessories
current
Qty.
Order No.
Type
current
Qty.
2-pole
Q 2 SAK16
76 A
50
0457500000
QL 2 SAK35
99 A
20
0123600000
3-pole
Q 3 SAK16
76 A
50
0457600000
QL 3 SAK35
99 A
20
0123700000
4-pole
Q 4 SAK16
76 A
50
0457700000
QL 4 SAK35
99 A
20
0123800000
10-pole
Q 10 SAK16
76 A
20
0457800000
QL 10 SAK35
99 A
20
0338600000
VH 17/8/5 SAK35
50
0267000000
BFSC M4X30
50
0267100000
100
0136400000
Screwable cross-connection
Connecting sleeve
Mounting screw
SS M4
Lock washer
D 128-A 4
Order No.
Switchable link
Switchable link
Connecting sleeve
Mounting screw
VL 2 SAK16/SAKA
50
0135800000
VL 2 SAK35
50
0124000000
VH 19/5/3.5 SAK4-16
50
0285100000
VH 24.5/8/5 SAK35
50
0298700000
100
0292500000
BFSC M4X35
50
0298900000
20
0299600000
50
0140200000
BFSC M3X25
Testing / Checking
Width
Test plug
Socket
PS 4 F.STB 4
7.6 mm
STB 14/D6/4/M3 SAK10
119 A
Width
20
0299600000
PS 4 F.STB 4
50
0169900000
STB 16/D7/4/M4 SAK35
7.6 mm
End plate / Partition plate
beige
Blue
AP SAK16
1.5 mm
20
0271160000
AP SAK35/TW SAK16
1.5 mm
10
0303660000
AP SAK16 BL
1.5 mm
20
0271180000
AP SAK35/TW SAK16 BL
1.5 mm
10
0303680000
TW SAK35
1.5 mm
20
0304360000
50
0273400000
100
0129100000
beige
Blue
Small partition
Small partition
TSCH 1
2 mm
100
0319160000
50
0297800000
AD 3 SAK35
100
0128900000
BFSC M4X32 PA/RT
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Marking systems
BFSC M3X22 PA/RT
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.4
AD 3 SAK16
DEK 5/5
DEK 5/5 / SCHT 7
If QIs are aligned side by side, then a TW/AP must be used.
SAK 35/IK
35 mm²
SAK 35 N
35 mm²
Hexagon socket head screw
35 mm²
Hexagon socket head screw
18 x 58 x 67.5
150 / 50
2.5...50
IEC 60947-7-1
SAK 35 N/IK
Ex e II
IEC
1000
125
35
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
105
145
109
AWG 12...2
AWG 12...2
35
8/3
B8 / V2
KEMA 97ATEX1798 U
r#a
Rated connection
2.5...16 / 4...50
2.5...35 / 2.5...35
4.0...5.0 Nm (M 6)
18 / S4 (DIN 6911)
16 x 58 x 67.5
150 / 50
2.5...50
16 x 58 x 67.5
150 / 50
2.5...50
IEC 60947-7-1
IEC 60947-7-1
IEC
1000
125
35
UL
CSA
600
600
105
120
AWG 12...2
AWG 12...2
8/3
B8 / V2
IEC
1000
125
35
ru#a
B
UL
CSA
600
600
105
120
AWG 12...2
AWG 12...2
8/3
B8 / V2
ru#a
Rated connection
2.5...16 / 4...50
2.5...35 / 1.5...35
4.0...5.0 Nm (M 6)
18 / 6.5 x 1.2 mm
Rated connection
2.5...16 / 4...50
2.5...35 / 1.5...35
4.0...6.0 Nm (M 6)
18 / S4 (DIN 6911)
2.5...10 / 10...16
2.5...16 / 2.5...16
2.5...10 / 10...16
2.5...16 / 2.5...16
2.5...10 / 10...16
2.5...16 / 2.5...16
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
Type
Order No.
Type
Order No.
Type
0476560000
SAK 35N
0550660000
SAK 35N/IK
Qty.
SAK 35/IK
20
Qty.
20
Qty.
20
Order No.
0555760000
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
Type
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAK35
99 A
20
0123600000
QL 2 SAK35N
99 A
50
0564900000
QL 2 SAK35N
99 A
50
0564900000
QL 3 SAK35
99 A
20
0123700000
QL 3 SAK35N
99 A
50
0565000000
QL 3 SAK35N
99 A
50
0565000000
QL 4 SAK35
99 A
20
0123800000
QL 4 SAK35N
99 A
50
0565100000
QL 4 SAK35N
99 A
50
0565100000
QL 10 SAK35
99 A
20
0338600000
QL 10 SAK35N
99 A
20
0565200000
QL 10 SAK35N
99 A
20
0565200000
VH 17/8/5 SAK35
50
0267000000
VH 17/8/5 SAK35
50
0267000000
VH 17/8/5 SAK35
50
0267000000
BFSC M4X30
50
0267100000
BFSC M4X30
50
0267100000
BFSC M4X30
50
0267100000
100
0136400000
SS M4
100
0136400000
SS M4
100
0136400000
20
0299600000
PS 4 F.STB 4
20
0299600000
50
0140200000
STB 16/D7/4/M4 SAK35
50
0140200000
AP SAK35/TW SAK16
1.5 mm
10
0303660000
1.5 mm
20
0304360000
50
0576700000
100
0129100000
SS M4
D 128-A 4
D 128-A 4
D 128-A 4
50
0124000000
VH 24.5/8/5 SAK35
50
0298700000
BFSC M4X35
50
0298900000
20
0299600000
PS 4 F.STB 4
50
0140200000
STB 16/D7/4/M4 SAK35
10
0303660000
AP SAK35/TW SAK16
1.5 mm
10
0303660000
AP SAK35/TW SAK16 BL
1.5 mm
10
0303680000
1.5 mm
20
0304360000
TW SAK35
50
0576700000
AD 4 SAK35N
100
0129100000
BFSC M4X32 PA/RT
VL 2 SAK35
119 A
Width
PS 4 F.STB 4
7.6 mm
STB 16/D7/4/M4 SAK35
AP SAK35/TW SAK16
TW SAK35
AD 4 SAK35
BFSC M4X32 PA/RT
1.5 mm
1.5 mm
Width
20
0304360000
TW SAK35
50
0178700000
AD 4 SAK35N
100
0129100000
BFSC M4X32 PA/RT
7.6 mm
SAK-Series TS 32
Feed-through terminal
Order No.
Width
7.6 mm
DEK 5/5
DEK 5/5
DEK 5/5
If QIs are aligned side by side, then a TW/AP must be used.
If QIs are aligned side by side, then a TW/AP must be used.
If QIs are aligned side by side, then a TW/AP must be used.
B.5
SAK-Series TS 32
Feed-through terminal
SAK 2.5
TS 32 / KrG
2.5 mm²
SAK 4
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 36.5 x 46.5
32 / 6
0.13...6
6.5 x 40 x 51.5
41 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Note
Ex e II
IEC
800
24
2.5
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
20
25
21
AWG 22...12 AWG 26...10
2.5
8/3
A3 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...2.5
0.4...0.6 Nm (M 2.5)
10 / 0.6 x 3.5 mm
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
20
36
28
AWG 22...12 AWG 26...10
4
8/3
A4 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
...1.5
0.5...1.5
0.5...1.5
0.5...1 / 0.5...1
With twin ferrules ZH 0.5 to ZH 1.5, rated voltage is 690 V.
With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V.
Type
Qty.
Order No.
Type
Qty.
Order No.
SAK 2.5 KRG
100
0279620000
SAK 4 KRG
100
0128320000
SAK 2.5 KRG/BL
100
0279670000
SAK 4 KRG BL
100
0128370000
Ordering data
Version
Medium yellow
Blue
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 SAK2.5
41 A
50
0337000000
Q 2 SAK4
41 A
50
0336700000
Order No.
3-pole
Q 3 SAK2.5
41 A
50
0337100000
Q 3 SAK4
41 A
50
0336800000
4-pole
Q 4 SAK2.5
41 A
50
0337200000
Q 4 SAK4
41 A
50
0336900000
10-pole
Q 10 SAK2.5
41 A
20
0368700000
Q 10 SAK4
41 A
20
0368800000
VL 2 SAK4
32 A
50
0197000000
50
0285100000
100
0292500000
20
0180400000
50
0168600000
Connecting sleeve
Mounting screw
Lock washer
Switchable link
Switchable link
VH 19/5/3.5 SAK4-16
Connecting sleeve
BFSC M3X25
Mounting screw
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 6/D3.9/2.3/M2.5 ZB
Width
20
0180400000
PS 2.3 RT
50
0130200000
STB 14/D5/2.3/M3 SAK2.5
5.4 mm
End plate / Partition plate
Medium yellow
Blue
Medium yellow
Blue
AP SAK2.5 KRG
1.5 mm
20
0279520000
AP SAK4-10 KRG
1.5 mm
20
0117920000
AP SAK2.5 KRG BL
1.5 mm
20
0279570000
AP SAK4-10 KRG/BL
1.5 mm
20
0117970000
TW SAK2.5 KRG
2.5 mm
20
0302820000
TW SAK4-10 KRG
2.5 mm
20
0130120000
TW SAK2.5 KRG/BL
2.5 mm
20
0302870000
TW SAK4-10 KRG/BL
2.5 mm
20
0130170000
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
50
0303400000
AD 4 SAK4
50
0285300000
100
0128900000
BFSC M3X22 PA/RT
100
0128900000
Small partition
Small partition
TSCH 1
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Marking systems
BFSC M3X22 PA/RT
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.6
AD 4 AKZ4
DEK 5/6 / SCHT 7
DEK 5/6,5 / SCHT 7
SAK 6 N
6 mm²
8 x 40 x 51.5
57 / 10
0.33...10
SAK 10
10 mm²
10 x 40 x 51.5
76 / 16
1.5...16
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
40
47
36
AWG 22...8
AWG 20...8
6
8/3
A5 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
0.5...10 / 0.5...6
0.5...10 / 0.5...6
0.8...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
SAK 16
16 mm²
B
12 x 50 x 57.5
76 / 16
2.5...16
IEC 60947-7-1
Ex e II
IEC
800
57
10
T
II 2 G D
UL
CSA
EN 60079-7
600
600
550
60
65
50
AWG 14...6
AWG 16...6
10
8/3
B6 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
1.5...10 / 1.5...16
1.5...16 / 1.5...10
2.0...4.0 Nm (M 4)
12 / 1.0 x 5.5 mm
IEC 60947-7-1
Ex e II
IEC
1000
76
16
T
II 2 G D
UL
CSA
EN 60079-7
600
600
690
80
87
66
AWG 12...4
AWG 14...6
16
8/3
B6 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
Rated connection
2.5...10 / 4...16
4...16 / 4...16
2.0...4.0 Nm (M 4)
15 / 1.0 x 5.5 mm
When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V.
When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V.
Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
Type
Qty.
Order No.
Type
Qty.
Order No.
Type
SAK 6N KRG
100
0193220000
SAK 10 KRG
100
0110020000
SAK 16 KRG
SAK 10 KRG/BL
100
0110070000
Qty.
50
Order No.
0271020000
With AWG 6 and H07V-R10 conductors, an increased MD torque of 1.4
to1.6 Nm should be used.
A higher torque of 2 to 2.4 Nm is necessary when using H07V-R16 and
AWG 6 conductors.
If QIs are aligned side by side, then a TW/AP must be used.
Type
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
Q 2 SAK6N
32 A
50
0456700000
Q 2 SAK10
57 A
50
0457100000
Q 2 SAK16
76 A
50
0457500000
Q 3 SAK6N
57 A
50
0456800000
Q 3 SAK10
57 A
50
0457200000
Q 3 SAK16
76 A
50
0457600000
Q 4 SAK6N
57 A
50
0456900000
Q 4 SAK10
57 A
50
0457300000
Q 4 SAK16
76 A
50
0457700000
Q 10 SAK6N
32 A
20
0457000000
Q 10 SAK10
57 A
20
0457400000
Q 10 SAK16
76 A
20
0457800000
VL 2 SAK6N/SAKT
32 A
50
0194700000
VL 2 SAK6/10/SAKB
32 A
50
0135900000
VL 2 SAK16/SAKA
57 A
50
0135800000
50
0285100000
VH 19/5/3.5 SAK4-16
50
0285100000
VH 19/5/3.5 SAK4-16
50
0285100000
100
0292500000
BFSC M3X25
100
0292500000
BFSC M3X25
100
0292500000
20
0299600000
50
0169900000
VH 19/5/3.5 SAK4-16
BFSC M3X25
Width
PS 4 F.STB 4
7.6 mm
Width
20
0299600000
PS 4 F.STB 4
7.6 mm
STB 14/D6/4/M3 SAK10
0299600000
PS 4 F.STB 4
50
0169900000
STB 14/D6/4/M3 SAK10
AP SAK4-10 KRG
1.5 mm
20
0117920000
AP SAK4-10 KRG
1.5 mm
20
0117920000
AP SAK16 KRG
AP SAK4-10 KRG/BL
1.5 mm
20
0117970000
AP SAK4-10 KRG/BL
1.5 mm
20
0117970000
AP SAK35/TW SAK16 BL
TW SAK4-10 KRG
2.5 mm
20
0130120000
TW SAK4-10 KRG
2.5 mm
20
0130120000
TW SAK4-10 KRG/BL
2.5 mm
20
0130170000
TW SAK4-10 KRG/BL
2.5 mm
20
0130170000
2 mm
100
0319160000
TSCH 1
2 mm
100
50
0196600000
AD 4 SAK10
100
0128900000
BFSC M3X22 PA/RT
TSCH 1
AD 4 SAK6N
BFSC M3X22 PA/RT
DEK 5/8 / SCHT 7
DEK 5/5
Order No.
Width
20
SAK-Series TS 32
Feed-through terminal
7.6 mm
3 mm
20
0271120000
1.5 mm
10
0303680000
TW SAK16 KRG
3 mm
20
0281120000
0319160000
TSCH 1
2 mm
100
0319160000
50
0178600000
AD 4 SAK16
50
0518200000
100
0128900000
BFSC M3X22 PA/RT
100
0128900000
DEK 5/5
B.7
SAK-Series TS 32
Feed-through terminal
SAK 35
TS 32 / KrG
35 mm²
SAK 35/IK
35 mm²
Hexagon socket head screw
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
18 x 58 x 67.5
125 / 50
6...50
18 x 58 x 67.5
125 / 50
6...50
IEC 60947-7-1
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Note
IEC
1000
125
35
Ex e II
UL
600
105
AWG 6...2
CSA
600
145
AWG 6...2
T
II 2 G D
EN 60079-7
550
109
35
IEC 60947-7-1
IEC
1000
125
35
Ex e II
UL
600
105
AWG 6...2
8/3
B9 / 5VA
T
II 2 G D
EN 60079-7
550
109
35
8/3
B9 / 5VA
KEMA 97ATEX1798 U
?ru#i~a
CSA
600
145
AWG 6...2
Rated connection
6...16 / 16...50
10...35 / 10...35
5,0 Nm (M 6)
20 / 6.5 x 1.2 mm
KEMA 97ATEX1798 U
r#a
Rated connection
6...16 / 16...50
10...35 / 10...35
5,0 Nm (M 6)
20 / S4 (DIN 6911)
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
Type
Order No.
Type
0303520000
SAK 35/IK KRG
Ordering data
Version
Medium yellow
Qty.
SAK 35 KRG
20
Qty.
20
Order No.
0476520000
Blue
Note
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
Type
Accessories
current
Qty.
Order No.
Type
current
Qty.
2-pole
QL 2 SAK35
99 A
20
0123600000
QL 2 SAK35
99 A
20
0123600000
3-pole
QL 3 SAK35
99 A
20
0123700000
QL 3 SAK35
99 A
20
0123700000
4-pole
QL 4 SAK35
99 A
20
0123800000
QL 4 SAK35
99 A
20
0123800000
10-pole
QL 10 SAK35
99 A
20
0338600000
QL 10 SAK35
99 A
20
0338600000
VH 17/8/5 SAK35
50
0267000000
VH 17/8/5 SAK35
50
0267000000
BFSC M4X30
50
0267100000
BFSC M4X30
50
0267100000
100
0136400000
SS M4
100
0136400000
Screwable cross-connection
Connecting sleeve
Mounting screw
Lock washer
SS M4
D 128-A 4
D 128-A 4
Order No.
Switchable link
Switchable link
Connecting sleeve
Mounting screw
50
0124000000
VL 2 SAK35
50
0124000000
VH 24.5/8/5 SAK35
50
0298700000
VH 24.5/8/5 SAK35
50
0298700000
BFSC M4X35
50
0298900000
BFSC M4X35
50
0298900000
20
0299600000
50
0140200000
VL 2 SAK35
119 A
Width
Testing / Checking
Test plug
Socket
PS 4 F.STB 4
7.6 mm
STB 16/D7/4/M4 SAK35
119 A
Width
20
0299600000
PS 4 F.STB 4
50
0140200000
STB 16/D7/4/M4 SAK35
AP SAK35 KRG
3 mm
10
0303620000
3 mm
20
0304320000
50
0178700000
100
0129100000
7.6 mm
End plate / Partition plate
Medium yellow
Blue
Medium yellow
AP SAK35 KRG
3 mm
10
0303620000
AP SAK35 KRG/BL
3 mm
10
0303670000
TW SAK35 KRG
3 mm
20
0304320000
TW SAK35 KRG
50
0178700000
AD 4 SAK35
100
0129100000
BFSC M4X32 PA/RT
Blue
Small partition
Small partition
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Marking systems
BFSC M4X32 PA/RT
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.8
AD 4 SAK35
DEK 5/5 / SCHT 7
DEK 5/5
If QIs are aligned side by side, then a TW/AP must be used.
If QIs are aligned side by side, then a TW/AP must be used.
SAK 35 N
35 mm²
SAK 70
70 mm²
SAK 95
95 mm²
16 x 58 x 67.5
125 / 50
2.5...50
22 x 75 x 79.5
192 / 70
16...70
28 x 87.9 x 100.5
232 / 120
16...120
IEC 60947-7-1
IEC 60947-7-1
IEC 60947-7-1
IEC
1000
125
35
UL
CSA
600
600
105
120
AWG 12...2
AWG 12...2
8/3
B8 / 5VA
IEC
1000
192
70
ru#a
UL
CSA
600
600
150
150
AWG 4...2/0 AWG 4...2/0
8/3
B11 / 5VA
IEC
1000
232
95
ru#~a
Rated connection
2.5...16 / 4...50
2.5...35 / 1.5...35
4.0...5.0 Nm (M 6)
18 / 6.5 x 1.2 mm
Connection torque H07V-R70 = 12 Nm
Type
Order No.
Type
Order No.
Type
0550620000
SAK 70 KRG
10
0340820000
SAK 95 KRG
SAK 70 KRG/BL
10
0340870000
Qty.
20
UL
CSA
600
600
190
200
AWG 6...4/0 AWG 6...4/0
8/3
B13 / 5VA
Rated connection
16...16 / 16...120
16...95 / 10...95
16...20 Nm (M 10)
30 / S8 (DIN 6911)
The tightening torque is 4.5 Nm for 16 - 50 mm² and AWG 6 - 2/7 stranded conductors. Twin wire end ferrules ZH 2.5 - ZH 16 can be used.
SAK 35N KRG
B
ra
Rated connection
16...16 / 16...70
16...70 / 16...35
6.0...12 Nm (M 8)
24 / S6 (DIN 6911)
Ribbon cable (segmented ribbon) can be connected ranging from 3 to 6 segments
of 0.8x9 mm, up to 6 segments of 0.8x16 mm and up to 6 segments of 0.5x13 mm.
Qty.
Qty.
Order No.
0550520000
10
It is possible to use twin ferrules with identical rated voltages (LAB 13090).
Type
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
QL 2 SAK35N
99 A
50
0564900000
QL 2 SAK70
192 A
20
0345300000
QL 2 SAKG28
10
0551200000
QL 3 SAK35N
99 A
50
0565000000
QL 3 SAK70
192 A
5
0167000000
QL 3 SAKG28
5
0407600000
QL 4 SAK35N
99 A
50
0565100000
QL 4 SAKG28
5
0407700000
QL 10 SAK35N
99 A
20
0565200000
VH 17/8/5 SAK35
50
0267000000
VH 30.5/11/5.5 SAK70
20
0345500000
VH 35/11/5.5 SAK95
10
0551100000
BFSC M4X30
50
0267100000
BFSC M5X45
20
0345600000
KISC M5X50/26 SAK95
20
0630200000
100
0136400000
SS M5
50
0346100000
20
0299600000
PS 4 F.STB 4
20
0299600000
PS 4 F.STB 4
20
0299600000
50
0140200000
STB 16/D7/4/M5 SAK70
50
0385400000
STB 16/D7/4/M5 SAK70
50
0385400000
AP 70 SAK70 KRG
10
0340920000
AP SAK95 KRG
10
0550920000
50
0344400000
SS M4
D 128-A 4
D 128-A 5
Width
PS 4 F.STB 4
7.6 mm
STB 16/D7/4/M4 SAK35
Width
7.6 mm
3 mm
10
0303620000
AP SAK35 KRG/BL
3 mm
10
0303670000
TW SAK35 KRG
3 mm
20
0304320000
50
0576700000
AD 3 SAK70
10
0344300000
100
0129100000
BFSC M5X45 PA/NA
50
0344400000
AD 4 SAK35N
BFSC M4X32 PA/RT
DEK 5/5
DEK 5/5
4 mm
current
Qty.
Order No.
Width
AP SAK35 KRG
BFSC M5X45 PA/NA
SAK-Series TS 32
Feed-through terminal
7.6 mm
3 mm
DEK 5/5
If QIs are aligned side by side, then a TW/AP must be used.
B.9
SAK-Series TS 32
Two-tier modular terminals
DK 4
TS 32 / PA
4 mm²
DK 4 Q
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 50 x 59.5
41 / 6
0.13...6
6 x 50 x 59.5
41 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Note
Ex e II
IEC
500
32
4
T
II 2 G D
UL
CSA
EN 60079-7
300
300
275
27
10
28
AWG 22...12 AWG 26...10
4
6/3
A3 / V2
SIRA 02ATEX3316U
ru#~a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...2.5
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
IEC 60947-7-1
Ex e II
IEC
500
32
4
T
II 2 G D
UL
CSA
EN 60079-7
300
300
275
27
10
28
AWG 22...12 AWG 26...10
4
6/3
A3 / V2
SIRA 02ATEX3316U
r#a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...2.5
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
0.5...1.5
0.5...1.5 / 0.5...1.5
0.5...1.5
0.5...1.5 / 0.5...1.5
With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V.
With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V.
Type
Qty.
Order No.
Type
Qty.
Order No.
DK 4
100
0355460000
DK 4Q/32
100
0590060000
DK 4 BL
100
0355480000
DK 4Q/32 BL
100
0590080000
Ordering data
Version
beige
Blue
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
3-pole
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
10-pole
Q 10 AKZ4
32 A
20
0368600000
Q 10 AKZ4
32 A
20
0368600000
20
0180400000
50
0215700000
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
Order No.
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
5.4 mm
End plate / Partition plate
beige
Blue
Dark beige Wemid
AP DK4
1.5 mm
20
0359260000
AP DK4Q
1.5 mm
20
1397160000
AP DK4 BL
1.5 mm
20
0359280000
AP DK4Q BL
1.5 mm
20
1397180000
WTW EN
3 mm
20
1058800000
WTW EN
3 mm
20
1058800000
TSCH 6 DKI S4
5 mm
100
0190260000
TSCH 6 DKI S4
5 mm
100
0190260000
Small partition
Small partition
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.10
DEK 5/6
DEK 5/6
DK 4 QV
SAK-Series TS 32
Two-tier modular terminals
4 mm²
B
6 x 54 x 59.5
41 / 6
0.13...6
IEC 60947-7-1
Ex e II
IEC
500
32
4
T
II 2 G D
UL
CSA
EN 60079-7
300
300
275
27
10
28
AWG 22...12 AWG 26...12
4
6/3
A3 / V2
SIRA 02ATEX3316U
r#a
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...2.5
0.5...0.8 Nm (M 3)
8 / 0.6 x 3.5 mm
0.5...1.5
0.5...1.5 / 0.5...1.5
With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V.
Type
Qty.
Order No.
DK 4QV/32
100
0590260000
DK 4QV/32 BL
100
0590280000
Type
current
Qty.
Q 2 AKZ4
32 A
50
0336400000
Order No.
Q 3 AKZ4
32 A
50
0336500000
Q 4 AKZ4
32 A
50
0336600000
Q 10 AKZ4
32 A
20
0368600000
20
0180400000
50
0215700000
Width
PS 2.3 RT
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
AP DK4Q
1.5 mm
20
1397160000
AP DK4Q BL
1.5 mm
20
1397180000
WTW EN
3 mm
20
1058800000
TSCH 6 DKI S4
5 mm
100
0190260000
50
0303400000
100
0303300000
AD 4 AKZ4
BFSC M2.5X18 PA/RT
DEK 5/6
B.11
SAK-Series TS 32
Modular PE terminals
EK 2.5N
TS 32 / PA
2.5 mm²
EK 4
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 36.5 x 46.5
/4
0.33...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjacent terminal
Rated impulse withstand voltage to adjacent terminal
Short-time withstand current
Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Tightening torque range (fixing screw)
Stripping length / Blade size
mm²
V
kV
8 x 40 x 51.5
/6
0.33...6
Ex e II
IEC
UL
2.5
AWG 22...12
800
8
300 A (2.5 mm²)
CSA
AWG 26...10
T
II 2 G D
IEC 60947-7-2
EN 60079-7
AWG 26...10
mm²
mm²
mm/-
Ex e II
IEC
UL
4
AWG 22...12
800
8
480 A (4 mm²)
3
A3 / V2
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
AWG 26...10
3
A4 / V2
KEMA 97ATEX1798 U
r#a
PE
Rated connection
0.5...4 / 0.5...2.5
0.5...4 / 0.5...2.5
0.4...0.8 Nm (M 2.5)
0.5...0.8 Nm
10 / 0.6 x 3.5 mm
KEMA 97ATEX1798 U
r#ia
Rated connection
0.5...6 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
0.5...1.0 Nm
12 / 0.6 x 3.5 mm
Note
Ordering data
Version
green/yellow
Type
Qty.
Order No.
Type
Qty.
Order No.
EK 2.5N
100
0474360000
EK 4
100
0354560000
Order No.
Type
Width
Qty.
0494920000
SH 2
40 mm
10
Note
Accessories
Rail support
Marking systems
Width
Qty.
SH 2
40 mm
10
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.12
Type
DEK 5/6
DEK 5/6,5
Order No.
0494920000
EK 10
10 mm²
10 x 40 x 51.5
/ 10
0.5...10
Ex e II
IEC
UL
10
AWG 14...6
800
8
720 A (6 mm²)
CSA
AWG 14...6
T
II 2 G D
EN 60079-7
AWG 14...6
PE
IEC 60947-7-2
EK 35
KEMA 97ATEX1798 U
B
16 x 58 x 67.5
/ 50
6...50
CSA
AWG 10...4
PE
Ex e II
IEC
UL
35
AWG 6...2
800
8
4200 A (35 mm²)
3
B6 / V2
Rated connection
0.5...10 / 1.5...6
0.5...10 / 0.5...10
1.2...1.6 Nm (M 4)
0.5...1.0 Nm
12 / 1.0 x 5.5 mm
35 mm²
IEC 60947-7-2
IEC
UL
16
AWG 10...6
800
8
1920 A (16 mm²)
3
B6 / V2
r#a
16 mm²
12 x 50 x 57.5
/ 16
2.5...16
PE
IEC 60947-7-2
EK 16
CSA
AWG 10...2
T
II 2 G D
EN 60079-7
AWG 10...2
3
B9 / V2
r#a
KEMA 97ATEX1798 U
r#a
Rated connection
2.5...16 / 2.5...16
2.5...16 / 4...16
2.0...4.0 Nm (M 4)
0.8...1.6 Nm
16 / 1.0 x 5.5 mm
Rated connection
6...16 / 16...50
10...35 / 10...35
4.0...6.0 Nm (M 6)
0.8...1.6 Nm
20 / 6.5 x 1.0 mm
Type
Qty.
Order No.
Type
EK 10
100
0354660000
EK 16
Qty.
Order No.
Type
Width
Qty.
0494920000
SH 2
40 mm
10
50
Order No.
Type
0374660000
EK 35
Qty.
Order No.
Type
Width
Qty.
0494920000
SH 2
40 mm
10
20
Order No.
0354760000
*UNDEFINED TEXT*
Type
Width
Qty.
SH 2
40 mm
10
DEK 5/5
DEK 5/5
SAK-Series TS 32
Modular PE terminals
Order No.
0494920000
DEK 5/5
The TS 35/15 Cu must be used when connecting conductors of 50 mm².
B.13
SAK-Series TS 32
Modular PE terminals
EK 2
TS 32
10 mm²
SAKE 35
35 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
10.2 x 52 x 38
/ 10
1.5...10
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjacent terminal
Rated impulse withstand voltage to adjacent terminal
Short-time withstand current
Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Tightening torque range (fixing screw)
Stripping length / Blade size
IEC
10
mm²
-
14 x 46 x 39
/ 35
6...35
PE
IEC 60947-7-2
UL
AWG 16...8
CSA
AWG 16...8
IEC
35
1200 A (10 mm²)
UL
AWG 8...2
4200 A (35 mm²)
B6 / ---
B8 / V-0
r#
mm²
mm²
mm/-
CSA
AWG 8...2
r#
Rated connection
1.5...10 / 1.5...10
1.5...10 / 1.5...10
1.2...1.6 Nm (M 4)
2.0...4.0 Nm
14 / 1.0 x 5.5 mm
Rated connection
6...35 / 6...35
6...35 / 10...35
4.0...5.0 Nm (M 6)
2.0...4.0 Nm
16 / 6.5 x 1.2 mm
Note
Ordering data
Version
Type
Qty.
EK 2
20
Order No.
Type
0323100000
SAKE 35
Qty.
Order No.
Type
Width
Qty.
0494920000
SH 2
40 mm
10
20
Order No.
0144400000
Note
Accessories
Rail support
(see assortment in catalogue 7)
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.14
Type
Width
Qty.
SH 2
40 mm
10
Order No.
0494920000
SAKE 70
SAK-Series TS 32
Modular PE terminals
70 mm²
B
18 x 94 x 59.5
/ 70
10...70
PE
IEC 60947-7-2
IEC
70
UL
CSA
AWG 1...2/0
8400 A (70 mm²)
B10 / V-0
r#
Rated connection
10...16 / 10...70
10...70 / 10...70
6.0...12 Nm (M 8)
2.0...4.0 Nm
25 /
When connecting with stranded conductors ≥ 50 mm² and 12 Nm tightening torque. Test current 8.4 kA to IK carried out via copper terminal rail
Type
Qty.
SAKE 70/32
10
Type
Width
Qty.
SH 2
40 mm
10
Order No.
0213200000
Order No.
0494920000
A copper TS 32 rail must be used for connecting conductors >= 50 mm².
B.15
SAK-Series TS 32
Disconnect terminals
SAKR
TS 32 / PA
4 mm²
SAKR StB
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Note
6.5 x 42 x 40.5
10 / 4
0.13...4
6.5 x 42 x 40.5
10 / 4
0.13...4
IEC 60947-7-1
IEC 60947-7-1
IEC
400
10
4
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
6/3
A3 / V2
IEC
400
10
4
?#a
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
6/3
A3 / V2
#a
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Torque for SAKR with socket: 0.5 - 0.7 Nm.
Tightening torque via the sockets is 0.5 - 0.7 Nm.
Ordering data
Version
beige
Blue
Type
Qty.
Order No.
Type
Qty.
Order No.
SAKR
100
0412160000
SAKR 2STB
100
0412260000
SAKR BL
100
0412180000
SAKR 2STB BL
100
0412280000
Note
Accessories
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
External cross-connection
Width
Testing / Checking
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 6/D3.7/2.3/M3 SAKR
Order No.
Width
20
0180400000
PS 2.3 RT
100
0379400000
STB 6/D3.7/2.3/M3 SAKR
5.4 mm
20
0180400000
100
0379400000
End plate / Partition plate
beige
AP SAKR BE
1.5 mm
20
0211360000
AP SAKR BE
1.5 mm
20
0211360000
Blue
AP SAKR BL
1.5 mm
20
0211380000
AP SAKR BL
1.5 mm
20
0211380000
1 mm
20
0297100000
TW SAK2.5 HP/TF/GE/1
1 mm
20
0297100000
beige
Tropical applications
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.16
TW SAK2.5 HP/TF/GE/1
DEK 5/6,5 / SCHT 7
DEK 5/6,5 / SCHT 7
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
DKT 4
4 mm²
DKT 4 V
6 x 65 x 56.5
10 / 4
0.13...4
6 x 65 x 56.5
10 / 4
0.13...4
IEC 60947-7-1
IEC 60947-7-1
IEC
400
10
4
UL
CSA
300
300
10
10
AWG 22...12 AWG 26...12
6/3
A3 / V2
IEC
400
10
4
4 mm²
B
UL
CSA
6/3
A3 / V2
r#a
#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
Type
Qty.
Order No.
Type
DKT 4
100
0687360000
DKT 4V 2STB
Type
Qty.
50
Order No.
1304860000
current
Qty.
Order No.
Type
current
Qty.
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
Width
Order No.
Width
PS 2.3 RT
5.4 mm
20
0180400000
PS 2.3 RT
5.4 mm
20
0180400000
AP DKT4 PA
1.5 mm
20
0687560000
AP DKT4 PA
1.5 mm
20
0687560000
2 mm
20
0607000000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TW SAKS2 HP/DBR/2
DEK 5/6
SAK-Series TS 32
Disconnect terminals
DEK 5/6
B.17
SAK-Series TS 32
Disconnect terminals
SAKR
TS 32 / KrG
4 mm²
SAKR StB
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Note
6.5 x 42 x 40.5
10 / 4
0.13...4
6.5 x 42 x 40.5
10 / 4
0.13...4
IEC 60947-7-1
IEC 60947-7-1
IEC
400
10
4
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
6/3
A3 / 5VA
IEC
400
10
4
#a
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
6/3
A3 / 5VA
r#a
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Torque for SAKR with socket: 0.5 - 0.7 Nm.
Tightening torque via the sockets is 0.5 - 0.7 Nm.
Ordering data
Version
Medium yellow
Type
Qty.
Order No.
Type
Qty.
Order No.
SAKR KRG
100
0412120000
SAKR 2STB KRG
100
0412220000
Order No.
Type
20
0180400000
PS 2.3 RT
100
0379400000
STB 6/D3.7/2.3/M3 SAKR
1.5 mm
20
0211320000
AP SAKR KRG
1 mm
20
0297100000
TW SAK2.5 HP/TF/GE/1
Note
Accessories
Screwable cross-connection
Type
Qty.
Qty.
Order No.
2-pole
3-pole
4-pole
10-pole
Connecting sleeve
Mounting screw
Lock washer
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 6/D3.7/2.3/M3 SAKR
Width
20
0180400000
100
0379400000
1.5 mm
20
0211320000
1 mm
20
0297100000
5.4 mm
End plate / Partition plate
Medium yellow
AP SAKR KRG
Blue
Medium yellow
Blue
Tropical applications
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.18
TW SAK2.5 HP/TF/GE/1
DEK 5/6,5 / SCHT 7
DEK 5/6,5 / SCHT 7
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
SAKC 4
4 mm²
SAKC 10
10 mm²
6.5 x 40 x 51.5
25 / 6
0.33...6
12 x 65 x 52.5
27 / 10
0.33...10
IEC 60947-7-1
IEC 60947-7-1
IEC
400
25
4
UL
CSA
300
300
25
25
AWG 22...12 AWG 22...10
6/3
A4 / 5VA
IEC
500
26
10
r#a
B
UL
CSA
600
600
25
25
AWG 22...8 AWG 20...10
6/3
B6 / 5VA
r#a
Rated connection
0.5...6 / 1.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
Rated connection
0.5...10 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Tightening torque via the sockets is 0.5 - 0.7 Nm.
Tightening torque for socket is 1.2 Nm. Tightening torque is 2 Nm when
connecting 10-mm² stranded conductor
Type
Qty.
Order No.
Type
SAKC 4 KRG
100
0340720000
SAKC 10 2STB
SAKC 4 2STB 7 order no. 0340620000
Type
Qty.
50
Qty.
Order No.
Type
current
Qty.
QL 2 SAKA10
36 A
50
0135500000
QL 3 SAKA10
36 A
50
0135600000
QL 4 SAKA10
36 A
50
0135700000
QL 10 SAKA10
36 A
20
0338500000
50
0299700000
BFSC M4X20
100
0362800000
SS M4
100
0136400000
20
0299600000
50
0147100000
D 128-A 4
Width
5.4 mm
STB 7/D4/2.3/M3 ZB/SAKC
Order No.
0324120000
Version with socket (right), Art.no.: 0324020000 SAKC 10 STB/RE
VH 13.6/7/4.2 SAKA10
PS 2.3 RT
SAK-Series TS 32
Disconnect terminals
Order No.
Width
20
0180400000
PS 4 F.STB 4
100
0358500000
STB 17/D6/4/M4 SAKC10
AP SAKB-C-T I
3 mm
20
0146710000
TW SAKB-C-T
3 mm
20
0242920000
AP SAK4-10 KRG
1.5 mm
20
0117920000
AP SAK4-10 KRG/BL
1.5 mm
20
0117970000
TW SAK4-10 KRG
2.5 mm
20
0130120000
TW SAK4-10 KRG/BL
2.5 mm
20
0130170000
7.6 mm
DEK 5/6,5
DEK 5/6,5
Dummy plug and pull out tool see chapter accessories
Pull out force look under Accessories.
B.19
SAK-Series TS 32
Fuse terminals
KSKM 1
TS 32 / PA
10 mm²
5 x 20
KSKM 2
10 mm²
1“ x 1/4“
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
13 x 69 x 63
6.3 / 16
0.13...16
13 x 69 x 63
13 / 16
0.13...16
Technical data
Rated data
Rated voltage
V
Rated current
A
Rated cross-section
mm²
Rated impulse voltage / Pollution severity
kV/Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
Tightening torque range (clamping screw)
Stripping length / Blade size
mm/2 conductors with same cross-section (H05V/H07V)
solid / stranded
mm²
flexible / Stranded wire with end ferrules
mm²
IEC
250
6.3
10
UL
600
10
AWG 26...8
CSA
IEC
250
13
10
UL
600
15
AWG 26...8
B6 / V-0
CSA
B6 / V-0
#a
#a
Rated connection
0.5...16
0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Rated connection
0.5...16
0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Note
Ordering data
Version
Type
Order No.
Type
KSKM 1/32 G20
Qty.
20
9509570000
KSKM 2/32 GZ 1X1/4
Qty.
20
9509580000
Order No.
Type
Qty.
Order No.
Type
Qty.
Order No.
Note
Accessories
Screwable cross-connection
2-pole
3-pole
4-pole
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
0,10 A
G 20/0.10A/F
10
0430300000
0,20 A
G 20/0.20A/F
10
0430400000
0,25 A fast
G 20/0.25A/F
10
0430500000
0,50 A fast
G 20/0.50A/F
10
0430600000
0,63 A
G 20/0.63A/F
10
0439000000
1,00 A fast
G 20/1.00A/F
10
0430700000
1,60 A
G 20/1.60A/F
10
0430800000
2,00 A fast
G 20/2.00A/F
10
0430900000
2,50 A
G 20/2.50A/F
10
0431000000
3,15 A
G 20/3.15A/F
10
0431100000
4,00 A
G 20/4.00A/F
10
0431200000
5,00 A
G 20/5.00A/F
10
0431300000
6,30 A
G 20/6.30A/F
10
0431400000
SBL/1912
10
0446100000
Contact sleeve
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.20
SBL/2111
DEK 5/5
DEK 5/5
Fuse 1“ x 1/4“ aren‘t available by Weidmüller.
10
0446200000
KDKS 1
SAK-Series TS 32
Fuse terminals
4 mm²
B
8 x 73.5 x 55.6
6.3 / 4
0.33...4
IEC 60947-7-3
IEC
500
6.3
4
UL
CSA
300
10
AWG 22...12
6/3
A3 / V2
#a
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
8 / 0.6 x 3.5 mm
0.5...1.5
0.5...1.5 / 0.5...1.5
Note: max. conductor size = 2.5 mm² when using the cross-connection.
Type
Qty.
KDKS 1/32
50
Order No.
9503300000
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Type
current
Qty.
QB 2 WI RA8 IS
27 A
50
0461100000
Order No.
QB 3 WI RA8 IS
27 A
50
0461200000
QB 4 WI RA8 IS
27 A
50
0461300000
G 20/0.10A/F
10
0430300000
G 20/0.20A/F
10
0430400000
G 20/0.25A/F
10
0430500000
G 20/0.50A/F
10
0430600000
G 20/1.00A/F
10
0430700000
G 20/1.60A/F
10
0430800000
G 20/2.00A/F
10
0430900000
G 20/2.50A/F
10
0431000000
G 20/3.15A/F
10
0431100000
G 20/4.00A/F
10
0431200000
G 20/5.00A/F
10
0431300000
G 20/6.30A/F
10
0431400000
DEK 5/8
B.21
SAK-Series TS 32
Fuse terminals
SAKS 1 5x20
TS 32 / KrG
10 mm²
SAKS 1 5x20
10 mm²
With LED or glow lamp
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
13 x 54 x 61
10 / 16
0.13...16
13 x 54 x 61
10 / 16
0.5...16
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
10
10
UL
CSA
600
600
6.3
10
AWG 22...10 AWG 26...10
6/3
B6 / 5VA
IEC
500
6.3
10
?ru#i~a
mm²
mm²
mm/-
Note
UL
CSA
AWG 22...8
AWG 26...10
4/
B6 / 5VA
#
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Connections for 10-mm² stranded conductors require a tightening torque
of 2 Nm.
Connections for 10-mm² stranded conductors require a tightening torque
of 2 Nm.
Type
Type
Ordering data
Version
500 V AC/DC
Qty.
SAKS 1/G20
20
Order No.
Qty.
Order No.
0191220000
With GL 230 V AC/DC
SAKS 1/32 G20 GL 230VAC
10
0306120000
With GL 115 V AC/DC
SAKS 1/32 G20 GL 115VAC
10
0385320000
With LED +- 24 V DC
SAKS 1/32 G20 LD 24VDC
10
0371420000
Type
Qty.
Order No.
500 V AC/DC
Note
Accessories
current
Qty.
2-pole
Type
QL 2 SAKS1
36 A
50
0191400000
3-pole
QL 3 SAKS1
36 A
50
0191500000
4-pole
QL 4 SAKS1
36 A
20
0191600000
20
0191320000
Screwable cross-connection
Order No.
10-pole
End plate / Partition plate
Width
Medium yellow
Marking systems
3 mm
Width
AP SAKS1+3 KRG
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.22
AP SAKS1+3 KRG
DEK 5/5
Refer to „Accessories“ Chapter for cross-connection accessories
DEK 5/5
3 mm
20
0191320000
SAKS 1 5x25
10 mm²
SAKS 1 5x25
10 mm²
SAKS 3
10 mm²
With glow lamp
13 x 54 x 61
10 / 16
0.13...16
IEC
500
10
10
13 x 54 x 61
6.3 / 16
0.5...16
UL
CSA
300
600
6.3
10
AWG 22...8 AWG 26...10
6/3
B6 / 5VA
IEC
500
6.3
10
?ru#i~a
CSA
IEC
500
10
10
AWG 22...8
AWG 26...10
4/
B6 / 5VA
#
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Connections for 10-mm² stranded conductors require a tightening torque
of 2 Nm.
Connections for 10-mm² stranded conductors require a tightening torque
of 2 Nm.
Type
Type
Qty.
20
Order No.
UL
CSA
300
600
10
10
AWG 22...8 AWG 22...10
6/3
B6 / 5VA
?#a
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
SAKS 1/G25
B
13 x 54 x 61
10 / 16
0.33...16
UL
Qty.
Order No.
0191120000
SAKS 1/32 G25 GL 230VAC
10
Type
Qty.
Order No.
SAKS 3 G/5X30 500V
20
0297520000
SAKS 3 GZ/6.3X32
20
0248920000
0309320000
SAKS 3 1‘‘x1/4‘‘ with a red cap available under 0211120000.
Type
Order No.
Type
current
Qty.
current
Qty.
QL 2 SAKS1
36 A
50
0191400000
QL 2 SAKS1
36 A
50
0191400000
QL 3 SAKS1
36 A
50
0191500000
QL 3 SAKS1
36 A
50
0191500000
QL 4 SAKS1
36 A
20
0191600000
QL 4 SAKS1
36 A
20
0191600000
QL 10 SAKS1
36 A
20
0338800000
QL 10 SAKS1
36 A
20
0338800000
20
0191320000
Width
AP SAKS1+3 KRG
3 mm
Qty.
Order No.
Type
Width
20
0191320000
AP SAKS1+3 KRG
3 mm
Order No.
Width
20
0191320000
DEK 5/5
DEK 5/5
Refer to „Accessories“ Chapter for cross-connection accessories
Refer to „Accessories“ Chapter for cross-connection accessories
SAK-Series TS 32
Fuse terminals
AP SAKS1+3 KRG
3 mm
DEK 5/5
B.23
SAK-Series TS 32
Fuse terminals
SAKS 2
TS 32 / KrG
10 mm²
SAKS 4
10 mm²
D 01-fuses
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
27.6 x 80 x 75
10 / 16
0.33...16
24 x 75 x 66
16 / 16
0.33...16
IEC 60947-7-3
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
10
10
IEC 60947-7-3
UL
CSA
600
25
AWG 22...8
6/3
B6 / 5VA
IEC
400
16
10
?ru#im
mm²
mm²
mm/-
Note
UL
CSA
600
30
AWG 22...8
6/3
B6 / 5VA
ru#~
Rated connection
0.5...16 / 0.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
14 / 1.0 x 5.5 mm
Connections for stranded conductors from 10 mm² and 7-wire AWG conductors require a tightening torque of 2 Nm.
Connections for stranded conductors from 10 mm² and 7-wire AWG conductors require a tightening torque of 2 Nm.
Type
Ordering data
Version
Without LED
Qty.
SAKS 2
20
Order No.
Type
0206820000
SAKS 4
Qty.
20
Order No.
0321320000
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QL 2 SAKS2
36 A
20
0207800000
QL 2 SAKS4
36 A
20
0328000000
3-pole
QL 3 SAKS2
36 A
20
0207900000
QL 3 SAKS4
36 A
20
0328100000
4-pole
QL 4 SAKS2
36 A
20
0208000000
QL 4 SAKS4
36 A
20
0328200000
10-pole
QL 10 SAKS2
36 A
20
0338900000
QL 10 SAKS4
36 A
20
0339000000
Mounting screw
BFSC M4X9T
100
0103300000
BFSC M4X9T
100
0103300000
SS M4
100
0136400000
SS M4
100
0136400000
Lock washer
D 128-A 4
D 128-A 4
Width
Screw cover cap
SK
Order No.
Width
25
0284110000
SK E14 SAKS4
20
0339410000
P 16/10 RT SAKS2
100
0208900000
P 14/2 D01 RS SAKS4
50
0138000000
P 16/16 GR SAKS2
100
0209000000
P 14/4 D01 BR SAKS4
50
0138100000
P 16/20 BL SAKS2
100
0209100000
P 14/10 D01 RT SAKS4
50
0328700000
P 14/6 D01 GN SAKS4
50
0328600000
SK E16/SAKS2
Gauge rings
Fuse cartridges
Marking systems
25
0208500000
E 14/2A RS
10
0137400000
E 16/16A GR TNDZ
25
0208600000
E 14/4A BR
10
0137500000
E 16/20A BL TNDZ
25
0208700000
E 14/6A GN
10
0328300000
E 16/25A GE TNDZ
25
0208800000
E 14/10A RT
10
0328400000
E 14/16A GR
10
0328500000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.24
E 16/10A RT TNDZ
DEK 5/5 / SCHT 7
DEK 5/5
SAKS 4 USA
10 mm²
1 1/4“ x 1/4“
SAKS 5
SAK-Series TS 32
Fuse terminals
16 mm²
D 02 - fuse
24 x 75 x 73
30 / 16
0.5...16
B
28 x 80 x 66
63 / 16
1.5...16
IEC 60947-7-3
IEC
400
16
10
UL
CSA
600
600
30
30
AWG 20...8
AWG 22...8
6/3
B6 / 5VA
IEC
400
63
16
r#a
UL
CSA
600
600
40
63
AWG 14...6
AWG 14...6
6/3
B7 / 5VA
ru#~a
Rated connection
0.5...16 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
14 / 1.0 x 5.5 mm
Rated connection
1.5...16 / 1.5...16
1.5...16 / 1.5...16
1.2...2.4 Nm (M 4)
13 / 1.0 x 5.5 mm
Connections for stranded conductors from 10 mm² and 7-wire AWG conductors require a tightening torque of 2 Nm.
Connections for stranded conductors from 10 mm² and 7-wire AWG conductors require a tightening torque of 2 Nm.
Type
Qty.
SAKS 4 USA
Type
20
Order No.
Type
0162220000
SAKS 5 380AC
Qty.
20
Order No.
0359420000
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAKS4
36 A
20
0328000000
QL 2 SAKS2
36 A
20
0207800000
QL 3 SAKS4
36 A
20
0328100000
QL 3 SAKS2
36 A
20
0207900000
QL 4 SAKS4
36 A
20
0328200000
QL 4 SAKS2
36 A
20
0208000000
QL 10 SAKS4
36 A
20
0339000000
QL 10 SAKS2
36 A
20
0338900000
BFSC M4X9T
100
0103300000
BFSC M4X9T
100
0103300000
SS M4
100
0136400000
SS M4
100
0136400000
SK E18 SAKS5
20
0359310000
P 18/20 D02 BL SAKS5
50
0361800000
P 18/25 D02 GE SAKS5
50
0361900000
P 18/35 D02 SW SAKS5
50
0362000000
P 18/50 D02 WS SAKS5
50
0362100000
E 18/20A BL
10
0361300000
E 18/25A GE
10
0361400000
E 18/50A WS
10
0361600000
E 18/63A KU
10
0361700000
D 128-A 4
D 128-A 4
Width
SK E14 SAKS4 USA
DEK 5/5
Order No.
Width
1
2012790000
DEK 5/5
Partition wall TW HP (2.0) order no. 0607000000 only for TS 32
B.25
SAK-Series TS 32
Fuse inserts and gauge rings for Weidmüller fuse terminals
Fuse inserts
Order data
Technical data
for terminal type
SAKS 1
SAKS 7
ASK 1
WSI 6
G fuse inserts 5 x 20 without indicator acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1)
Size (mm)
Rated voltage (V) Rated current (A) Type
0.1
(F) G 20/0.10A/F
5 x 20
Breaking capacity 1500 A
(at 250 V, 50 Hz, cos, cos : 0.7)
250
B
0.2
0.25
0.5
0.63
1.0
1.6
2.0
2.5
3.15
4.0
5.0
6.3
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
G 20/0.20A/F
G 20/0.25A/F
G 20/0.50A/F
G 20/0.63A/F
G 20/1.00A/F
G 20/1.60A/F
G 20/2.00A/F
G 20/2.50A/F
G 20/3.15A/F
G 20/4.00A/F
G 20/5.00A/F
G 20/6.30A/F
Qty.
Order No.
10
0430300000
10
10
10
10
10
10
10
10
10
10
10
10
0430400000
0430500000
0430600000
0439000000
0430700000
0430800000
0430900000
0431000000
0431100000
0431200000
0431300000
0431400000
(M) = medium-delayed action (F) = fast
SAKS 1
SAKS 7
WSI 6
G fuse inserts 5 x 25 with indicator acc. to DIN 41576 1)
0.25
5 x 25 m. K.1)
Breaking capacity 80 A
0.5
(at 250 V, 50 Hz, cos : = 1)
0.8
250
1
10
2
4
6.3
(M)
G 25/0.25A/M
10
0546900000
(M)
(M)
(M)
(M)5)
G 25/0.50A/M
G 25/0.80A/M
G 25/1.00A/M
G 25/10.0A/M
10
10
10
10
(F)
(F)
(F)
G 25/2.00A/F
G 25/4.00A/F
G 25/6.30A/F
10
10
10
0510300000
0646400000
0265800000
0193100000
0192700000
0192800000
0192900000
GZ 0.5A/F
10
0533800000
GZ 1.0A/F
GZ 2.0A
GZ 3.0A
GZ 5.0A
GZ 7.0A
GZ 10.0A
GZ 12.5A/FF
10
10
10
10
10
10
10
0525500000
0294500000
0295700000
0294600000
0295800000
0293900000
0245400000
E 16/10A RT
25
0208500000
E 16/16A GR
E 16/20A BL
E 16/25A GE
25
25
25
0208600000
0208700000
0208800000
10
0137400000
10
10
10
10
10
10
10
10
10
0137500000
0328300000
0328400000
0328500000
0361300000
0361400000
0361500000
0361600000
0361700000
M) = medium-delayed action (F) = fast
SAKS 32)
SAKS 6
Fuse inserts 1¼" x ¼" without indicator acc. to BS 88
0.5
33 kA Breaking capacity 33 kA fast
E 0.5A
1
E 1 A
440
2
E 2 A
3
E 3 A
5
E 5 A
7
E 7 A
10
E 10 A
12.5
(F) = fast
SAKS 2
D fuse inserts E 16 with indicator acc. to DIN 49360 (diazed)
10
E 10 A
E 16 A
16
E 20 A
500
20
E 25 A
25
F) = fast
SAKS 4 4)
SAKS 5
(M) = medium-delayed action
D fuse inserts E 14 Size D 01 and E 18 size D 02 with indicator acc. to DIN 49522 (neozed)3)
2
E 14/2A RS
E 14/2
E 14/4
4
E 14/4A BR
E 14/6
400
6
E 14/6A GN
E 14/10
10
E 14/10A RT
E 14/16
16
E 14/16A GR
20
E 18/20A BL
E 18/20
25
E 18/25A GE
E 18/25
400
35
E 18/35A SW
E 18/35
50
E 18/50A WS
E 18/50
E 18/63
63
E 18/63A KU
(F) = fast
Note:
B.26
(M) = miedium-delayed action
(M) = medium-delayed action
) The SIBA company also supplies 5 x 25 G fuse inserts with indicators in a shipbuilding model for 450 V AC.
) 5 x 30 (500 V AC) fuse inserts for SAKS 3 are available from the WICKMANN company
) The LINDNER company also supplies neozed fuse cartridges in an additional shipbuilding mode for 440 V AC.
4
)F
use cartridges with the dimensions 1“x1/4“ c 25.4x6.35 mm and 13/32“x11/2“ c 10.3x38.1 mm are not included in product line.
5
) Only for SAKS 1 and SAKS 7.
1
2
3
Gauge rings
Technical data
Order data
for terminal type
Gauge ring type
Amp.
Colour
Type
Qty.
SAKS 4 and 4/35
P 14/2
2
P 14/4
P 14/6
P 14/1
4
6
10
SAKS 5 and 5/35
P 18/20
P 18/25
P 18/35
P 18/50
SAKS 2 and 2/35
P 16/10
P 16/16
P 16/20
Order No.
pink
P 14/2D01 RS
50
0138000000
brown
green
red
P 14/4D01 BR
P 14/6D01 GN
P 14/10D01 RT
50
50
50
0138100000
0328600000
0328700000
20
25
35
50
blue
yellow
black
white
P 18/20D02 BL
P 18/25D02 GE
P 18/35D02 SW
P 18/50D02 WS
50
50
50
50
0361800000
0361900000
0362000000
0362100000
10
16
20
red
grey blue
P 16/10 RT
P 16/16 GR
P 16/20 BL
100
100
100
0208900000
0209000000
0209100000
B.27
SAK-Series TS 32
Fuse inserts and gauge rings for Weidmüller fuse terminals
B
SAK-Series TS 32
Terminals with spring-loaded cable clamps
RSF 3
TS 32
4 mm²
Material PA 6.6
RSF 1
10 mm²
Material KrG
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
8 x 50 x 60
32 / 4
0.33...4
11 x 50 x 60
57 / 10
0.5...10
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
630
32
4
V
A
mm²
kV/-
IEC 60947-7-1
UL
CSA
600
600
20
25
AWG 22...12 AWG 22...12
6/3
/ V2
IEC
500
57
10
#
mm²
mm²
mm/-
UL
CSA
300
50
AWG 14...8
6/3
A5 / 5VA
#
Rated connection
0.5...4 / 0.75...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
Rated connection
0.5...10 / 0.5...10
1.5...4 / 0.5...6
1.2...1.6 Nm (M 4)
15 / 1.0 x 5.5 mm
Note
When used with an AWG 8/7 conductor, the tightening torque is 1.6 Nm.
Ordering data
Version
Type
Qty.
RSF 3 PA
50
Order No.
Type
0497560000
RSF 1 KRG
Qty.
50
Order No.
0270320000
Note
Accessories
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QL 2 SAK6N
32 A
50
0194300000
QL 2 RSF1+2
57 A
50
0267400000
3-pole
QL 3 SAK6N
57 A
50
0194400000
QL 3 RSF1+2
57 A
50
0267500000
4-pole
QL 4 SAK6N
57 A
50
0194500000
QL 4 RSF1+2
41 A
50
0267600000
10-pole
QL 10 SAK6N
32 A
20
0338300000
QL 10 RSF1+2
41 A
20
0341700000
50
0164400000
Screwable cross-connection
Connecting sleeve
VH 13.5/4.9/3.3 SAK4
100
0248500000
Mounting screw
KISC M3X20.5/10 EK4
100
0303000000
50
0164400000
SS M3
Lock washer
SS M3
D 128-A 3
D 128-A 3
Order No.
Switchable link
Switchable link
Connecting sleeve
Mounting screw
50
0194700000
VL 2 RSF 1+2
50
0528400000
VH 21/5/3.5 SAK16-35
50
0309600000
VH 27/5/3.5 SAK10-35
50
0309400000
BFSC M3X30
50
0296200000
BFSC M3X35
50
0309800000
VL 2 SAK6N/SAKT
Testing / Checking
32 A
Width
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 14/D5/2.3/M3 SAK2.5
32 A
Width
20
0180400000
PS 4 F.STB 4
20
0299600000
50
0168600000
STB 14/D6/4/M3 SAK10
50
0169900000
TW AST1/PA HP/DBR/0.5 0.5 mm
20
0474700000
7.6 mm
End plate / Partition plate
beige
AP RSF3
3 mm
10
0270460000
beige
TW AST1/PA HP/DBR/0.5 0.5 mm
20
0474700000
100
0319160000
Small partition
Small partition
Marking systems
2 mm
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.28
TSCH 1
DEK 5/5
DEK 5/5
RSF 2
SAK-Series TS 32
Terminals with spring-loaded cable clamps
6 mm²
Material KrG
B
11 x 77 x 73
41 / 16
0.75...16
IEC 60947-7-1
IEC
500
41
6
UL
CSA
300
30
AWG 14...8
6/3
/ 5VA
#
Rated connection
0.75...16 / 0.5...10
1.5...10 / 0.5...4
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Type
Qty.
RSF 2
Type
20
Order No.
0623320000
current
Qty.
QL 2 RSF1+2
32 A
50
0267400000
Order No.
QL 3 RSF1+2
32 A
50
0267500000
QL 4 RSF1+2
32 A
50
0267600000
QL 10 RSF1+2
32 A
20
0341700000
20
0299600000
50
0147100000
Width
PS 4 F.STB 4
STB 17/D6/4/M4 SAKC10
7.6 mm
DEK 5/5
B.29
SAK-Series TS 32
Test-disconnect terminals
SAKA 10
TS 32 / KrG
10 mm²
SAKB 10
10 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
12 x 82 x 55.5
47 / 10
0.5...10
10 x 65 x 52.5
57 / 10
0.5...10
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
47
10
IEC 60947-7-1
UL
CSA
600
35
AWG 18...8
6/3
B6 / 5VA
IEC
500
57
10
r#
mm²
mm²
mm/-
Note
UL
CSA
600
45
AWG 18...8
6/3
B6 / 5VA
r#
Rated connection
0.5...10 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
Rated connection
0.5...10 / 1.5...10
0.5...10 / 0.5...10
1.2...2.4 Nm (M 4)
12 / 1.0 x 5.5 mm
10 mm² stranded can be connected with 2 Nm tightening torque.
10 mm² stranded can be connected with 2 Nm tightening torque.
Type
Ordering data
Version
Without socket
Qty.
SAKA 10
25
Order No.
Type
0134120000
SAKB 10
Qty.
50
Order No.
0134920000
With open rear wall for cross-connection
With 2 sockets
With 4 sockets
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
Order No.
2-pole
Type
QL 2 SAKA10
36 A
50
0135500000
QL 2 SAKB10
47 A
100
0114100000
3-pole
QL 3 SAKA10
36 A
50
0135600000
QL 3 SAKB10
47 A
50
0114300000
4-pole
QL 4 SAKA10
36 A
50
0135700000
QL 4 SAKB10
47 A
50
0114500000
10-pole
QL 10 SAKA10
36 A
20
0338500000
QL 10 SAKB10
47 A
20
0338400000
50
0348700000
50
0267100000
100
0103300000
Connecting sleeve
Mounting screw
VH 23/6/4.2 SAKA10
BFSC M4X30
End plate / Partition plate
BFSC M4X9T
Width
Medium yellow
Width
AP SAKA KRG
3 mm
20
0134220000
AP SAKB/C/T KRG
3 mm
20
0146720000
TW SAK2.5-35/32 KRG
3 mm
10
0257120000
TW SAKB-C-T
3 mm
20
0242920000
20
0299600000
PS 4 F.STB 4
7.6 mm
20
0299600000
50
0135200000
STB 16/D7/4/M4 SAK35
50
0140200000
beige
Medium yellow
Small partition
Small partition
Cross-connection slider
2-pole
3-pole
4-pole
Connecting sleeve for QVS
Mounting screw for QVS
Testing / Checking
Test plug
Socket
PS 4 F.STB 4
STB 13.5/D6/4/M4 SAKA10
7.6 mm
Miscellaneous accessories
Lockout device
Short-circuit plug, 2-pole
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.30
DEK 5/5
DEK 5/5
SAKT 1/LT
6 mm²
8 x 65 x 52.5
57 / 10
0.13...10
6 mm²
8 x 65 x 52.5
57 / 10
0.13...10
IEC 60947-7-1
IEC
400
41
6
SAKT 1/DU1
IEC
400
41
6
r#
B
IEC 60947-7-1
UL
CSA
300
300
25
25
AWG 22...8
AWG 26...8
6/3
A5 / 5VA
IEC
400
41
6
#
Rated connection
0.5...10 / 1.5...10
0.5...6 / 0.5...6
0.8...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
6 mm²
8 x 65 x 52.5
57 / 10
0.13...10
IEC 60947-7-1
UL
CSA
300
300
25
25
AWG 22...8
AWG 26...8
6/3
A5 / 5VA
SAKT 1/QT
UL
CSA
300
300
25
25
AWG 22...8
AWG 26...8
6/3
A5 / 5VA
r#
Rated connection
0.5...10 / 1.5...10
0.5...6 / 0.5...6
0.8...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
Rated connection
0.5...10 / 1.5...10
0.5...6 / 0.5...6
0.8...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm
tightening torque.
10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm
tightening torque.
10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm
tightening torque.
Type
Order No.
Type
Order No.
Type
SAKT 1/LT
50
0269120000
SAKT 1/DU2
50
0550420000
SAKT 1/QT2
50
0494820000
SAKT 1/DU1
50
0195620000
SAKT 1/QT1
50
0269320000
SAKT 1/LT STB14/4
50
0437920000
Type
Qty.
Qty.
Qty.
Order No.
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAK6N
57 A
50
0194300000
QL 2 SAK6N
57 A
50
0194300000
QL 2 SAK6N
32 A
50
0194300000
QL 3 SAK6N
57 A
50
0194400000
QL 3 SAK6N
57 A
50
0194400000
QL 3 SAK6N
57 A
50
0194400000
QL 4 SAK6N
57 A
50
0194500000
QL 4 SAK6N
57 A
50
0194500000
QL 4 SAK6N
57 A
50
0194500000
QL 10 SAK6N
57 A
20
0338300000
QL 10 SAK6N
57 A
20
0338300000
QL 10 SAK6N
32 A
20
0338300000
VH 12/4.9/3.3 SAK6N
100
0249000000
VH 12/4.9/3.3 SAK6N
100
0249000000
VH 12/4.9/3.3 SAK6N
100
0249000000
KISC M3X20 SAK10 CU5
100
0377100000
KISC M3X20 SAK10 CU5
100
0377100000
KISC M3X20 SAK10 CU5
100
0377100000
Width
AP SAKB/C/T KRG
TW SAKB/C/T1
TSCH 2
Width
3 mm
20
0146720000
AP SAKB/C/T KRG
1.5 mm
20
0242960000
TW SAKB/C/T1
0.6 mm
100
0353660000
TSCH 2
current
Order No.
Width
3 mm
20
0146720000
AP SAKB/C/T KRG
1.5 mm
20
0242960000
TW SAKB/C/T1
0.6 mm
100
0353660000
TSCH 2
current
3 mm
20
0146720000
1.5 mm
20
0242960000
0.6 mm
100
0353660000
current
QVS 2 SAKT1+2
20
0307300000
QVS 2 SAKT1+2
20
0307300000
QVS 2 SAKT1+2
41 A
20
0307300000
QVS 3 SAKT1+2
20
0329300000
QVS 3 SAKT1+2
20
0329300000
QVS 3 SAKT1+2
41 A
20
0329300000
QVS 4 SAKT1+2
20
0307400000
QVS 4 SAKT1+2
20
0307400000
QVS 4 SAKT1+2
41 A
20
0307400000
VH 19/6/4.2 SAKT1
50
0318000000
VH 19/6/4.2 SAKT1
50
0318000000
VH 19/6/4.2 SAKT1
50
0318000000
BS 25 O.IH SAKT1
50
0334700000
BS 25 O.IH SAKT1
50
0334700000
BS 25 O.IH SAKT1
50
0334700000
20
0299600000
50
0169900000
100
0531760000
20
0270960000
Width
PS 4 F.STB 4
STB 14/D6/4/M3 SAK10
SSP 3 SAKT1
QS 2/8/4
7.6 mm
Width
20
0299600000
PS 4 F.STB 4
50
0169900000
STB 14/D6/4/M3 SAK10
100
0531760000
SSP 3 SAKT1
20
0270960000
QS 2/8/4
7.6 mm
SAK-Series TS 32
Test-disconnect terminals
Width
20
0299600000
PS 4 F.STB 4
50
0169900000
STB 14/D6/4/M3 SAK10
100
0531760000
SSP 3 SAKT1
20
0270960000
QS 2/8/4
7.6 mm
DEK 5/6,5
DEK 5/6,5
DEK 5/6,5
To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits
with pilots!
To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits
with pilots!
To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits
with pilots!
B.31
SAK-Series TS 32
Test-disconnect terminals
SAKT 2/LT
TS 32 / KrG
6 mm²
SAKT 4/LT
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
8 x 82 x 52.5
46 / 10
0.5...10
8 x 57.2 x 42.5
41 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
125
41
6
IEC 60947-7-1
UL
CSA
300
25
AWG 22...8
6/3
A5 / 5VA
IEC
400
32
4
#a
mm²
mm²
mm/-
Note
UL
CSA
300
300
20
20
AWG 22...12 AWG 26...10
6/3
A3 / 5VA
r#a
Rated connection
0.5...10 / 1.5...10
0.5...6 / 0.5...6
1.2...1.6 Nm (M 3.5)
12 / 4.0 x 0.8 mm
Rated connection
0.5...6 / 1.5...4
0.5...4 / 0.5...4
0.4...0.7 Nm (M 2.5)
10 / 0.6 x 3.5 mm
10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm
tightening torque.
Two conductors with the same cross-section can be accommodated. 1.5
mm² solid and 0.5...1.5 mm² flexible
Type
Ordering data
Version
Order No.
Type
SAKT 2/LT O.STB
50
0445420000
SAKT 4/LT O.STB
50
0254120000
With 2 sockets
SAKT 2/LT STB
50
0330620000
SAKT 4/LT STB2.0
50
0310320000
With 4 sockets
SAKT 2/LT 4STB
50
0437720000
Without socket
Qty.
Qty.
Order No.
With open rear wall for cross-connection
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
Order No.
2-pole
Type
QL 2 SAK6N
32 A
50
0194300000
QL 2 SAK2.5
41 A
100
0155900000
3-pole
QL 3 SAK6N
57 A
50
0194400000
QL 3 SAK2.5
41 A
100
0156000000
4-pole
QL 4 SAK6N
57 A
50
0194500000
QL 4 SAK2.5
41 A
50
0156100000
10-pole
QL 10 SAK6N
32 A
20
0338300000
QL 10 SAK2.5
41 A
20
0338100000
VH 12/4.9/3.3 SAK6N
100
0249000000
VH 8/4.9/3.3 SAK2.5
100
0266700000
KISC M3X20 SAK10 CU5
100
0377100000
KISC M3X15/6 SAK2.5 CU5
100
0377200000
3 mm
20
0146720000
1.5 mm
20
0242960000
20
0474700000
0.6 mm
100
0353660000
20
1319260000
Connecting sleeve
Mounting screw
End plate / Partition plate
Width
Width
Medium yellow
beige
AP SAKB/C/T KRG
TW SAKB/C/T1
TW AST1/PA HP/DBR/0.5 0.5 mm
Medium yellow
Small partition
Small partition
TSCH 2
Cross-connection slider
current
current
2-pole
QVS 2 SAKT1+2
41 A
20
0307300000
3-pole
QVS 3 SAKT1+2
41 A
20
0329300000
4-pole
QVS 4 SAKT1+2
41 A
Connecting sleeve for QVS
Mounting screw for QVS
QVS 2/4 SAKT4
20
0307400000
VH 19/6/4.2 SAKT1
50
0318000000
VH 16/5/3.5 SAK10-35
50
0309700000
BS 25 O.IH SAKT1
50
0334700000
BFSC M3X22 SAKT4
50
1319900000
Testing / Checking
Width
Width
Test plug
Socket
32 A
PS 4 F.STB 4
STB 14/D6/4/M3 SAK10
7.6 mm
20
0299600000
PS 2.3 RT
20
0180400000
50
0169900000
STB 8.5/5/2.3/M3 SAK2.5
50
0280600000
100
0531760000
SSP 4 SAKT4
20
1319360000
20
0270960000
5.4 mm
Miscellaneous accessories
Lockout device
Short-circuit plug, 2-pole
Marking systems
QS 2/8/4
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.32
SSP 3 SAKT1
DEK 5/6,5
DEK 5/6,5
To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits
with pilots!
To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits
with pilots!
B
B.33
SAK-Series TS 32
SAK-Series TS 32
Terminals for temperature measuring circuits
SAK 2.5/TC
TS 32 / PA
2.5 mm²
DK 4 TC
4 mm²
Busbars from thermocouple materials, according
to DIN IEC 584.
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 36.5 x 46.5
/ 2.5
...2.5
6 x 54 x 59.5
/4
...4
IEC 60947-7-1 / IEC 60584
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
V
A
mm²
kV/-
IEC 60947-7-1 / IEC 60584
UL
CSA
IEC
2.5
mm/-
CSA
4
/3
/ V2
A3 / V2
#
mm²
mm²
UL
#
Rated connection
0.5...2.5
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
0.4...0.6 Nm (M 2.5)
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Type
Qty.
Order No.
NiCr
SAK 2.5/TC CH
100
0107260000
Type
Qty.
Order No.
Ni
SAK 2.5/TC AL
100
0107160000
CuNi
SAK 2.5/TC CO
100
0189860000
Fe
SAK 2.5/TC FE
100
0190060000
Cu
SAK 2.5/TC CU
100
(NiCr - Ni) type K
0189960000
DK 4Q/TC TYP K
100
1338260000
(Cu - CuNi) type T
DK 4Q/TC TYP T
100
1338160000
(Fe-CuNi) type J
DK 4Q/TC TYP J
100
1338060000
Note
Accessories
End plate / Partition plate
Width
Qty.
Order No.
Type
beige
Type
AP SAK2.5
1.5 mm
20
0279560000
AP DK4Q
beige
TW SAK2.5
2.5 mm
20
0302860000
Dark beige Wemid
Marking systems
Qty.
20
1397160000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
WTW EN
3 mm
20
1058800000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.34
Width
1.5 mm
DEK 5/6 / SCHT 7
DEK 5/6
Order No.
SAK-Series TS 32
Terminals for temperature measuring circuits
SAK 2.5/TC / DK 4 TC
B
Weidmüller thermocouple terminals are specially
designed for the transmission of very small
voltages in temperature measuring circuits. Special
current bars ensure that no false signals are
transmitted within the terminal when temperature
differences between the positive and negative
paths exist. This high measuring precision is
required, for example, in aircraft engine test rigs,
complicated chemical processes, controllers, etc.
• Material of current bar corresponds to thermal
and compensating conductors
• Clear thermocouple marking
• 2-pole blocks per thermocouple
• Modular width 10 mm
Configuration of a temperature measuring
circuit
1
2
3
4
5
6
CH
AL
1 Thermocouple (sensor)
2 Thermocouple terminals
3 Compensating conductor
4 Reference junction
5 Supply and return conductors
6 Measuring instrument
The thermocouple terminals shown in this
measuring circuit are used for the thermoelectrical
transmission of the thermoelectric voltage from
the thermocouple to the reference junction and
the indicator unit via the compensating conductor.
Thermocouple terminals are required for
constructing a temperature measuring circuit.
Technical data
Thermocouples to IEC 584 (DIN 43 710)
Terminal
a) Type J
Fe
(positive leg)
CuNi
(negative leg)
b) Type T
Cu
(positive leg)
CuNi
(negative leg)
c) Type K
NiCr
(positive leg)
Ni
(negative leg)
Busbar material
trade name
Iron
Constantan
Copper
Constantan
Chromel
Alumel
B.35
SAK-Series TS 32
Terminals with screw-less connections
with push-on connection
TS 32 / PA
AST 1
2.5 mm²
AST 3
2.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6.5 x 58 x 46
20 / 2.5
0.5...2.5
F6,3 F6,3
F2,8 F2,8
F6,3 F6,3
F2,8 F2,8
IEC 60947-7-1 / IEC 61210
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
20
2.5
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
600
13
CSA
300
16
IEC
500
20
2.5
UL
300
13
6/3
/ V2
CSA
300
16
6/3
/ 5VA
ru#a
#
Rated connection
mm²
mm²
6.5 x 40 x 46
20 / 2.5
0.5...2.5
Rated connection
0.5...2.5
0.5...2.5
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
The rated voltage is 800 V when using a cable-lug (flat) connector with IH
6.3 insulating sleeves.
Type
Type
Qty.
Order No.
AST 3 6.3
100
0236760000
mm/-
Note
Ordering data
Version
Qty.
Order No.
Slotted
AST 1 6.3/2.8
50
0478260000
Not slit
AST 1 6.3
50
0266360000
Note
Cable-lug connections should be connected with insulating sleeves. 20 A
with F 6.3 or 2 x F 2.8
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 SAK4
41 A
50
0336700000
Q 2 SAK4
41 A
50
0336700000
3-pole
Q 3 SAK4
41 A
50
0336800000
Q 3 SAK4
41 A
50
0336800000
4-pole
Q 4 SAK4
41 A
50
0336900000
Q 4 SAK4
41 A
50
0336900000
10-pole
Q 10 SAK4
41 A
20
0368800000
Q 10 SAK4
41 A
20
0368800000
Plug-in adapter
Width
Order No.
Width
2-pole
STA 2.5/2
100
0165860000
STA 2.5/2
100
0165860000
3-pole
STA 2.5/3
50
0165960000
STA 2.5/3
50
0165960000
4-pole
STA 2.5/4
50
0190360000
STA 2.5/4
50
0190360000
5-pole
STA 2.5/5
50
0166060000
STA 2.5/5
50
0166060000
8-pole
STA 2.5/8
50
0166160000
STA 2.5/8
50
0166160000
End plate / Partition plate
beige
AP AST1+5 DB
1.5 mm
20
0266400000
AP SAK2.5/35 + AST3+4
1.5 mm
20
0460560000
beige
TW AST1/PA HP/DBR/0.5 0.5 mm
20
0474700000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
5.4 mm
20
0180400000
PS 2.3 RT
5.4 mm
20
0180400000
50
0168600000
STB 14/D5/2.3/M3 SAK2.5
50
0168600000
Small partition
Small partition
TSCH 1
Testing / Checking
Test plug
Socket
PS 2.3 RT
STB 14/D5/2.3/M3 SAK2.5
Insulating sleeve
Marking systems
2,8
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
6,3
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.36
DEK 5/6,5
DEK 5/6
SAK 4 S
4 mm²
6.5 x 40 x 51.5
20 / 6
0.13...6
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
IEC
500
20
4
SAK 4 SS
2.5 mm²
6.5 x 40 x 51.5
20 / 2.5
0.5...2.5
6,3
2,8
6,3
2,8
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
CSA
300
300
13
13
AWG 26...12 AWG 26...12
6/3
A4 / V2
IEC
500
20
2.5
ru#a
4 mm²
6 x 54 x 59.5
20 / 4
0.33...4
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
CSA
600
300
13
13
AWG 18...14 AWG 18...14
6/3
/ V2
IEC
400
10
4
ru#a
Rated connection
0.33...6 / 1.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
DK 4 S
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
6/3
A3 / V2
ru#a
0.5...2.5
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...0.8 Nm (M 3)
8 / 0.6 x 3.5 mm
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
Cable-lug connections should be fitted with insulating sleeves. 20 A supplied via F 6.3 or 2 x F 2.8.
Type
Qty.
Order No.
Type
Qty.
Order No.
Type
Qty.
Order No.
SAK 4 S 6.3/2.8
100
0401260000
SAK 4 SS 6.3/2.8
100
0479660000
DK 4S SF 6.3/2.8
100
0631260000
Type
Rated connection
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAK4
32 A
100
0130600000
QL 2 SAK4
32 A
100
0130600000
Q 2 AKZ4
32 A
50
0336400000
QL 3 SAK4
32 A
100
0130700000
QL 3 SAK4
32 A
100
0130700000
Q 3 AKZ4
32 A
50
0336500000
QL 4 SAK4
32 A
50
0130800000
QL 4 SAK4
32 A
50
0130800000
Q 4 AKZ4
32 A
50
0336600000
QL 10 SAK4
32 A
20
0338200000
QL 10 SAK4
32 A
20
0338200000
Q 10 AKZ4
32 A
20
0368600000
AP SAK4-10
1.5 mm
20
0117960000
AP SAK4-10
1.5 mm
20
0117960000
AP DK4S
20
0631360000
TW 4 SAK4-10
1.5 mm
20
0130160000
TW 4 SAK4-10
1.5 mm
20
0130160000
5 mm
100
0190260000
5.4 mm
20
0180400000
50
0215700000
Width
Width
Order No.
Width
TSCH 6 DKI S4
PS 2.3 RT
STB 8.5/D4/2.3/M2.5 AKZ
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
DEK 5/6,5
DEK 5/6,5
DEK 5/6
B.37
SAK-Series TS 32
Terminals with screw-less connections
B
SAK-Series TS 32
Terminals with screw-less connections
with Termi-Point / Wire-Wrap connection TS 32 / PA
SAK 2.5 T 1x1
2.5 mm²
DK 4 T
4 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 36.5 x 67
8/6
0.33...6
6 x 50 x 77.5
10 / 6
0.5...6
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
250
8
2.5
V
A
mm²
kV/-
mm/-
1x1
IEC 60947-7-1 / IEC 61210
UL
CSA
300
10
AWG 22...12
4/3
A3 / V2
IEC
250
10
4
#
mm²
mm²
1x1
UL
CSA
300
300
10
10
AWG 22...12 AWG 22...12
4/3
A3 / V2
r#a
Rated connection
0.5...6 / 0.5...2.5
0.5...4 / 0.5...2.5
0.4...0.7 Nm (M 2.5)
10 / 0.6 x 3.5 mm
Rated connection
0.5...6 / 1.5...4
0.5...4 / 0.5...2.5
0.5...0.8 Nm (M 3)
8 / 0.6 x 3.5 mm
Note
Ordering data
Version
right
Type
Qty.
Order No.
Type
SAK 2.5 SW 1X1
100
0108560000
DK 4 SW 1X1
Qty.
50
Order No.
0536560000
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 SAK2.5
41 A
50
0337000000
Q 2 AKZ4
32 A
50
0336400000
3-pole
Q 3 SAK2.5
41 A
50
0337100000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 SAK2.5
41 A
50
0337200000
Q 4 AKZ4
32 A
50
0336600000
10-pole
Q 10 SAK2.5
41 A
20
0368700000
Q 10 AKZ4
32 A
20
0368600000
End plate / Partition plate
Width
beige
AP SAK2.5
1.5 mm
Width
20
0279560000
Blue
beige
TW SAK2.5
Order No.
AP DK4
1.5 mm
20
0359260000
AP DK4 BL
1.5 mm
20
0359280000
2 mm
20
0607000000
6 mm
100
0363360000
2.5 mm
20
0302860000
TW SAKS2 HP/DBR/2
2 mm
100
0319160000
TSCH 4 AKZ4
Small partition
Small partition
TSCH 1
External cross-connection
current
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
20
0180400000
50
0215700000
Testing / Checking
Width
Test plug
Socket
Marking systems
STB 8.5/5/2.3/M3 SAK2.5
5.4 mm
20
0180400000
PS 2.3 RT
50
0280600000
STB 8.5/D4/2.3/M2.5 AKZ
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.38
PS 2.3 RT
DEK 5/6
DEK 5/6
5.4 mm
with solder connection
TS 32 / PA
SAKRT
4 mm²
SAK 2.5 L
2.5 mm²
SAK-Series TS 32
Terminals with screw-less connections
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6.5 x 42 x 40.5
8/4
0.5...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
250
8
4
IEC 60947-7-1 / IEC 60068-2-20
UL
CSA
300
10
AWG 22...12
4/3
A3 / V2
IEC
250
17.5
2.5
r#
mm²
mm²
mm/-
Note
B
6 x 44.5 x 46.5
17.5 / 6
0.33...6
UL
CSA
300
10
AWG 22...12
4/3
A3 / V2
#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Rated connection
0.5...6 / 0.5...2.5
0.5...4 / 0.5...2.5
0.4...0.7 Nm (M 2.5)
10 / 0.6 x 3.5 mm
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
max 1.5 mm² conductor via solder connection
Type
Qty.
Order No.
Type
Qty.
Order No.
SAK 2.5 SL
100
0351460000
SAKR TS SE 1.6
100
0469360000
Ordering data
Version
beige
right
left
Note
Accessories
Screwable cross-connection
current
Qty.
2-pole
Type
Q 2 SAK2.5
41 A
50
0337000000
3-pole
Q 3 SAK2.5
41 A
50
0337100000
4-pole
Q 4 SAK2.5
41 A
50
0337200000
10-pole
Q 10 SAK2.5
41 A
20
0368700000
External cross-connection
Qty.
Order No.
Type
Order No.
current
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
20
0211360000
End plate / Partition plate
Width
beige
AP SAKR BE
1.5 mm
Width
Blue
beige
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
Blue
AP SAK2.5
1.5 mm
20
0279560000
AP SAK2.5 BL
1.5 mm
20
0279580000
TW SAK2.5
2.5 mm
20
0302860000
TW SAK2.5 BL
1.5 mm
20
0302880000
2 mm
100
0319160000
Small partition
Small partition
TSCH 1
Cover / warning label
Cover / warning label
AD 4 AKZ4
Mounting screw (plastic)
BFSC M3X22 PA/RT
50
0303400000
100
0128900000
20
0180400000
50
0280600000
Testing / Checking
Test plug
PS 2.3 RT
Socket
Marking systems
5.4 mm
20
0180400000
PS 2.3 RT
STB 8.5/5/2.3/M3 SAK2.5
5.4 mm
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
DEK 5/6,5
DEK 5/6
B.39
SAK-Series TS 32
Terminals with screw-less connections
with solder connection
TS 32 / PA
SAKR L STB 6
4 mm²
SAKR LL
1.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6.5 x 50 x 40.5
10 / 4
0.5...4
6.5 x 58 x 40.5
10 / 1.5
0.5...1.5
IEC 60947-7-1 / IEC 60068-2-20
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
250
10
4
V
A
mm²
kV/-
UL
IEC 60947-7-1 / IEC 60068-2-20
CSA
IEC
250
10
1.5
4/3
A3 / V2
#
mm²
mm²
mm/-
Note
UL
CSA
300
10
AWG 22...12
4/3
/ V2
r#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...2.5
0.5...1.0 Nm (M 3)
8 / 0.6 x 3.5 mm
Rated connection
0.5...1.5
0.5...1.5
When using disconnect terminals with sockets, the tightening torque is
0.5 -0.7 Nm.
Ordering data
Version
beige
Type
Qty.
Order No.
Type
Qty.
Order No.
SAKR LS 2STB
100
0518160000
SAKR LL
100
0464460000
Order No.
Type
right
left
Note
Accessories
Screwable cross-connection
Type
Qty.
Qty.
Order No.
2-pole
3-pole
4-pole
10-pole
External cross-connection
current
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
End plate / Partition plate
Width
Width
beige
AP SAKR BE
1.5 mm
20
0211360000
AP SAKR BE
1.5 mm
20
0211360000
Blue
AP SAKR BL
1.5 mm
20
0211380000
AP SAKR BL
1.5 mm
20
0211380000
2 mm
20
0607000000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
20
0180400000
100
0379400000
beige
TW SAKS2 HP/DBR/2
Blue
Small partition
Small partition
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Testing / Checking
Test plug
Socket
Marking systems
STB 6/D3.7/2.3/M3 SAKR
5.4 mm
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.40
PS 2.3 RT
DEK 5/6,5
QB 25 blank, refer to „Accessories“ section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used.
DEK 5/6,5
SAKR LL mit STB 6
SAK-Series TS 32
Terminals with screw-less connections
1.5 mm²
B
6.5 x 58 x 40.5
10 / 1.5
0.33...1.5
IEC 60947-7-1 / IEC 60068-2-20
IEC
250
10
1.5
UL
CSA
300
10
AWG 22...12
4/3
/ V2
r#
Rated connection
0.5...1.5
0.5...1.5
/ 0.6 x 3.5 mm
Tightening torque via the socket is 0.5 - 0.7 Nm.
Type
Qty.
Order No.
SAKR LL 2STB
100
0294260000
Type
Qty.
Order No.
Width
AP SAKR BE
1.5 mm
20
0211360000
AP SAKR BL
1.5 mm
20
0211380000
TW AST1/PA HP/DBR/0.5 0.5 mm
20
0474700000
PS 2.3 RT
20
0180400000
5.4 mm
DEK 5/6,5
B.41
SAK-Series TS 32
Terminals with screw-less connections
with push-on connection
TS 32 / KrG
AST 1
2.5 mm²
AST 3
2.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6.5 x 58 x 46
20 / 2.5
0.5...2.5
6,3 6,3
2,8 2,8
6,3 6,3
2,8 2,8
IEC 60947-7-1 / IEC 61210
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
20
2.5
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
600
13
CSA
300
16
IEC
500
20
2.5
UL
300
13
6/3
/ 5VA
CSA
300
16
6/3
/ 5VA
ru#a
r#a
Rated connection
mm²
mm²
6.5 x 40 x 46
20 / 2.5
0.5...2.5
Rated connection
0.5...2.5
0.5...2.5
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
The rated voltage is 800 V when using a cable-lug (flat) connector with IH
6.3 insulating sleeves.
Type
mm/-
Note
Ordering data
Version
Order No.
Type
Qty.
Order No.
Slotted
AST 1 6.3/2.8 KRG
Qty.
50
0478220000
AST 3 6.3/2.8 KRG
100
0442420000
Not slit
AST 1 6.3 KRG
50
0266320000
AST 3 6.3 KRG
100
0298020000
Note
Cable-lug connections should be connected with insulating sleeves. 20 A
with F 6.3 or 2 x F 2.8
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 SAK4
41 A
50
0336700000
Q 2 SAK4
41 A
50
0336700000
3-pole
Q 3 SAK4
41 A
50
0336800000
Q 3 SAK4
41 A
50
0336800000
4-pole
Q 4 SAK4
41 A
50
0336900000
Q 4 SAK4
41 A
50
0336900000
10-pole
Q 10 SAK4
41 A
20
0368800000
Q 10 SAK4
41 A
20
0368800000
Plug-in adapter
Order No.
Width
2-pole
STA 2.5/2
100
0165860000
3-pole
STA 2.5/3
50
0165960000
4-pole
STA 2.5/4
50
0190360000
5-pole
STA 2.5/5
50
0166060000
8-pole
STA 2.5/8
50
0166160000
End plate / Partition plate
Width
beige
Medium yellow
AP AST1+5 KRG
3 mm
20
0266420000
AP AST3+4 KRG
3 mm
20
0298120000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TSCH 1
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
5.4 mm
20
0180400000
PS 2.3 RT
5.4 mm
20
0180400000
50
0168600000
STB 14/D5/2.3/M3 SAK2.5
50
0168600000
Blue
beige
Medium yellow
Blue
Small partition
Small partition
Testing / Checking
Test plug
Socket
PS 2.3 RT
STB 14/D5/2.3/M3 SAK2.5
Insulating sleeve
Marking systems
2,8
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
6,3
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.42
DEK 5/6,5
DEK 5/6
AST 4
2.5 mm²
6.2 x 40 x 46
20 / 4
0.2...4
6,3
2,8
IEC 60947-7-1 / IEC 61210
IEC
500
20
2.5
AST 5
4 mm²
6.5 x 58 x 46
20 / 6
0.2...6
6,3
2,8
6,3
2,8
B
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
CSA
300
300
13
16
AWG 22...12 AWG 24...12
6/3
A3 / 5VA
IEC
500
20
4
r#a
UL
CSA
300
300
13
16
AWG 22...12 AWG 24...12
6/3
A4 / 5VA
ru#a
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...2.5
0.4...0.7 Nm (M 2.5)
9 / 0.6 x 3.5 mm
Rated connection
0.5...6 / 1.5...2.5
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
Cable-lug connections should be fitted with insulating sleeves. 20 A with F
6.3 or 2 x F 2.8 When used with F 2.8, the rated voltage is 500 V
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
Type
Qty.
Order No.
Type
AST 4 SF 6.3/2.8 KRG
100
0439120000
AST 5 SF 6.3/2.8 KRG
50
0479220000
AST 5 SF 6.3 KRG
50
0334520000
Type
SAK-Series TS 32
Terminals with screw-less connections
Qty.
Order No.
current
Qty.
Order No.
Type
current
Qty.
Q 2 SAK4
41 A
50
0336700000
Q 2 SAK4
41 A
50
0336700000
Order No.
Q 3 SAK4
41 A
50
0336800000
Q 3 SAK4
41 A
50
0336800000
Q 4 SAK4
41 A
50
0336900000
Q 4 SAK4
41 A
50
0336900000
Q 10 SAK4
41 A
20
0368800000
Q 10 SAK4
41 A
20
0368800000
STA 2.5/2
100
0165860000
STA 2.5/3
50
0165960000
STA 2.5/4
50
0190360000
STA 2.5/5
50
0166060000
STA 2.5/8
50
0166160000
Width
Width
AP AST3+4 KRG
3 mm
20
0298120000
AP AST1+5 KRG
3 mm
20
0266420000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TSCH 1
2 mm
100
0319160000
TSCH 1
2 mm
100
0319160000
5.4 mm
20
0180400000
PS 2.3 RT
5.4 mm
20
0180400000
50
0168600000
STB 14/D5/2.3/M3 SAK2.5
50
0168600000
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
PS 2.3 RT
STB 14/D5/2.3/M3 SAK2.5
DEK 5/6
DEK 5/6,5
B.43
SAK-Series TS 32
Terminals with screw-less connections
with push-on connection
TS 32 / KrG
SAK 4 S
4 mm²
SAK 4 SS
2.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6.5 x 40 x 51.5
20 / 6
0.13...6
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
500
20
4
mm/-
Note
6,3
2,8
6,3
2,8
6,3
2,8
6,3
2,8
IEC 60947-7-1 / IEC 61210
UL
CSA
300
300
13
13
AWG 26...12 AWG 26...12
6/3
A4 / 5VA
IEC
500
20
2.5
ru#a
mm²
mm²
6.5 x 40 x 51.5
20 / 2.5
0.5...2.5
UL
CSA
600
300
13
13
AWG 18...14 AWG 18...14
6/3
/ 5VA
?ru#a
Rated connection
0.33...6 / 1.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
12 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
Cable-lug connections should be fitted with insulating sleeves. 20 A with
F 6.3 or 2 x F 2.8
Type
Qty.
Order No.
Type
Qty.
Order No.
SAK 4 S 6.3/2.8/KRG
100
0401220000
SAK 4 SS 6.3/2.8 KRG
100
0479620000
SAK 4 SS 6.3/KRG
100
0352920000
Ordering data
Version
Slotted
Not slit
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
Order No.
2-pole
Type
QL 2 SAK4
32 A
100
0130600000
QL 2 SAK4
32 A
100
0130600000
3-pole
QL 3 SAK4
32 A
100
0130700000
QL 3 SAK4
32 A
100
0130700000
4-pole
QL 4 SAK4
32 A
50
0130800000
QL 4 SAK4
32 A
50
0130800000
10-pole
QL 10 SAK4
32 A
20
0338200000
QL 10 SAK4
32 A
20
0338200000
AP SAK4-10
1.5 mm
20
0117960000
TW 4 SAK4-10
1.5 mm
20
0130160000
Plug-in adapter
2-pole
3-pole
4-pole
5-pole
8-pole
End plate / Partition plate
Width
Width
beige
Medium yellow
Blue
AP SAK4-10 KRG
1.5 mm
20
0117920000
AP SAK4-10 KRG/BL
1.5 mm
20
0117970000
TW SAK4-10 KRG
2.5 mm
20
0130120000
TW SAK4-10 KRG/BL
2.5 mm
20
0130170000
beige
Medium yellow
Blue
Small partition
Small partition
Testing / Checking
Test plug
Socket
Insulating sleeve
Marking systems
2,8
IH 2.8 DB
100
0386060000
IH 2.8 DB
100
0386060000
6,3
IH 6.3 WEM GE
100
0386260000
IH 6.3 WEM GE
100
0386260000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.44
DEK 5/6,5
DEK 5/6,5
with solder connection
TS 32 / KrG
SAK 2.5 L
SAK-Series TS 32
Terminals with screw-less connections
2.5 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
B
6 x 44.5 x 46.5
17.5 / 6
0.33...6
IEC 60947-7-1 / IEC 60068-2-20
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
250
17.5
2.5
V
A
mm²
kV/-
UL
CSA
300
10
AWG 22...12
4/3
A3 / 5VA
r
mm²
mm²
mm/-
Note
Rated connection
0.5...6 / 0.5...2.5
0.5...4 / 0.5...2.5
0.4...0.7 Nm (M 2.5)
10 / 0.6 x 3.5 mm
max 1.5 mm² conductor via solder connection
Ordering data
Version
Medium yellow
Type
Qty.
Order No.
SAK 2.5 LS KRG
100
0544120000
Note
Accessories
Screwable cross-connection
current
Qty.
2-pole
Type
Q 2 SAK2.5
41 A
50
0337000000
3-pole
Q 3 SAK2.5
41 A
50
0337100000
4-pole
Q 4 SAK2.5
41 A
50
0337200000
10-pole
Q 10 SAK2.5
41 A
20
0368700000
20
0180400000
50
0280600000
Testing / Checking
Order No.
Width
Test plug
Socket
PS 2.3 RT
5.4 mm
STB 8.5/5/2.3/M3 SAK2.5
End plate
AP SAK2.5L KRG
1.5 mm
20
0309220000
Blue
AP SAK2.5L KRG BL
1.5 mm
20
0309270000
beige
TW SAKS2 HP/DBR/2
2 mm
20
0607000000
TSCH 1
2 mm
100
0319160000
50
0303400000
100
0128900000
Medium yellow
End plate / Partition plate
Small partition
Small partition
Cover / warning label
Cover / warning label
Mounting screw (plastic)
Marking systems
AD 4 AKZ4
BFSC M3X22 PA/RT
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
DEK 5/6
B.45
SAK-Series TS 32
Special terminals - SAKG
SAKG 28 I
TS 32 / KrG
35 mm²
The Weidmüller SAKG range offers the following
connection variants:
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
• Clamping yoke/flat lug as a combination,
Version I.
• Flat lug, Version II.
Two types of threading are provided here.
a) screw set with lock nut
b) with thread in busbar
28 x 70 x 63.5
150 / 50
6...50
• Clamping yoke connection, Version III.
The stripped conductor can be connected
without further preparation.
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
1000
125
35
UL
600
95
AWG 6...2
CSA
600
110
AWG 6...1
Versions
8/3
B9 / 5VA
?ru#a
mm²
mm²
mm/-
Note
Rated connection
6...16 / 6...50
10...35 / 6...35
4.0...6.0 Nm (M 6)
15 /
Version I
Version II
without thread
Version IIG
with thread
Version III
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 6 .. 50 mm²
Ordering data
Version
Type
Medium yellow
Qty.
SAKG 28 I
Order No.
0170020000
10
Note
Accessories
Screwable cross-connection
Type
current
Qty.
Order No.
2-pole
QL 2 SAKG28
10
0551200000
3-pole
QL 3 SAKG28
5
0407600000
4-pole
QL 4 SAKG28
5
0407700000
End plate
Width
dark brown
Tropical applications
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
26 mm
5
0326660000
End plate / Partition plate
dark brown
Tropical applications
Cables with cable lugs are connected to SAKG
terminals of Version I and to SS stud terminals.
Fitting instructions for SAKG terminals
When tightening the clamping screw, it is
recommended that the conductor be held against
the direction of tightening to prevent deformation
of the mounting rail and so as not to place the
terminal foot under undue torsional forces.
Cover / warning label
Cover / warning label
AH 28 SAKG28
Cover
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.46
To ensure shock protection following connections
of conductors, AH covers can be clipped onto
the terminal.
DEK 5/5
SAKG 28 II
TS 32 / KrG
35 mm²
SAKG 28 II G
35 mm²
SAK-Series TS 32
Special terminals - SAKG
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
28 x 70 x 53
150 / 50
6...50
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
1000
125
35
B
28 x 70 x 51.4
150 / 50
6...50
IEC 60947-7-1
UL
600
115
AWG 8...2
CSA
600
110
AWG 6...1
IEC
1000
125
35
UL
600
95
AWG 8...2
8/3
/ 5VA
CSA
600
110
AWG 6...1
8/
/ 5VA
?ru#a
?ru#
Rated connection
Rated connection
mm²
mm²
3.0...6.0 Nm (M 6)
3.0...6.0 Nm (M 6)
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 6 .. 50 mm²
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 6 .. 50 mm²
Type
mm/-
Note
Ordering data
Version
Medium yellow
Qty.
SAKG 28 II
10
Order No.
Type
0170320000
SAKG 28 II/GW
Qty.
Order No.
0185020000
10
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QL 2 SAKG28
125 A
10
0551200000
QL 2 SAKG28
125 A
10
0551200000
3-pole
QL 3 SAKG28
232 A
5
0407600000
QL 3 SAKG28
232 A
5
0407600000
4-pole
QL 4 SAKG28
125 A
5
0407700000
QL 4 SAKG28
125 A
5
0407700000
End plate
Width
dark brown
Tropical applications
Order No.
Width
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
26 mm
5
0326660000
AH 28 SAKG28
26 mm
5
0326660000
End plate / Partition plate
dark brown
Tropical applications
dark brown
Tropical applications
Cover / warning label
Cover / warning label
Marking systems
AH 28 SAKG28
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
DEK 5/5
DEK 5/5
B.47
SAK-Series TS 32
Special terminals - SAKG
SAKG 28 III
TS 32 / KrG
35 mm²
SAKG 32 I
50 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
28 x 70 x 63.5
150 / 50
6...50
32 x 87.3 x 84
192 / 70
10...70
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
1000
125
35
IEC 60947-7-1
UL
600
95
AWG 8...2
CSA
600
135
AWG 8...2
IEC
1000
150
50
8/3
B9 / 5VA
ru#a
mm²
mm²
mm/-
UL
CSA
600
600
165
170
AWG 6...3/0 AWG 1...2/0
8/3
B11 / 5VA
?ru#a
Rated connection
6...16 / 6...50
10...35 / 6...35
4.0...6.0 Nm (M 6)
15 /
Rated connection
10...16 / 10...70
10...70 / 10...70
6.0...12 Nm (M 8)
26 /
Note
Ordering data
Version
Type
Medium yellow
Order No.
Type
SAKG 28 III
Qty.
10
0170820000
SAKG 32 I
Type
Qty.
Order No.
Type
Qty.
Order No.
0286620000
10
Note
Accessories
Screwable cross-connection
current
Qty.
2-pole
QL 2 SAKG32+70
150 A
5
0194000000
3-pole
QL 3 SAKG32+70
150 A
5
0441500000
4-pole
QL 4 SAKG32+70
150 A
5
0441600000
End plate
Width
dark brown
Tropical applications
Order No.
Width
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
26 mm
5
0326660000
AH 32 SAKG32
30 mm
5
0326760000
End plate / Partition plate
dark brown
Tropical applications
dark brown
Tropical applications
Cover / warning label
Cover / warning label
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.48
AH 28 SAKG28
DEK 5/5
DEK 5/5
SAKG 32 II
50 mm²
32 x 80 x 53
192 / 70
10...70
50 mm²
32 x 80 x 53
192 / 70
10...70
IEC 60947-7-1
IEC
1000
150
50
SAKG 32 II G
IEC
1000
150
50
?ru#a
CSA
600
170
AWG 1...2/0
8/3
/ 5VA
IEC
1000
150
50
Rated connection
10...16 / 10...70
10...70 / 10...70
6.0...12 Nm (M 8)
26 /
6.0...12 Nm (M 8)
6.0...12 Nm (M 8)
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 10 .. 70 mm²
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 10 .. 70 mm²
Type
Qty.
Type
10
Order No.
Type
0170420000
SAKG 32 II/GW
UL
CSA
600
600
165
185
AWG 6...3/0 AWG 1...2/0
8/3
B11 / 5VA
ru#a
Rated connection
SAKG 32 II
B
IEC 60947-7-1
UL
?ru#
Rated connection
50 mm²
32 x 94 x 84.5
192 / 70
10...70
IEC 60947-7-1
UL
CSA
600
600
200
170
AWG 6...3/0 AWG 1...2/0
8/3
/ 5VA
SAKG 32 III
Qty.
10
Order No.
Type
0185120000
SAKG 32 III
10
0286720000
Order No.
Type
Qty.
Order No.
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAKG32+70
150 A
5
0194000000
QL 2 SAKG32+70
150 A
5
0194000000
QL 3 SAKG32+70
150 A
5
0441500000
QL 3 SAKG32+70
150 A
5
0441500000
QL 4 SAKG32+70
150 A
5
0441600000
QL 4 SAKG32+70
150 A
5
0441600000
Width
Qty.
Order No.
Width
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
Width
EP 1 SAKG32/35 HP/DBR
2 mm
10
0180500000
EP 1 SAKG32/35 HP/TF/GE
2 mm
10
0180600000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
30 mm
5
0326760000
AH 32 SAKG32
30 mm
5
0326760000
AH 32 SAKG32
30 mm
5
0326760000
AH 32 SAKG32
DEK 5/5
DEK 5/5
SAK-Series TS 32
Special terminals - SAKG
DEK 5/5
B.49
SAK-Series TS 32
Special terminals - SAKG
SAKG 70 II G
TS 32 / KrG
70 mm²
SAKG 40 I
95 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
32 x 84 x 51.4
192 / 95
10...95
40 x 94 x 84.5
232 / 95
10...95
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
1000
192
70
IEC 60947-7-1
UL
CSA
600
200
AWG 6...3/0 AWG 2/0...4/0
8/3
/ 5VA
IEC
1000
232
95
ru#
mm²
mm²
?ru#a
Rated connection
10...16
Rated connection
10...16 / 10...95
10...95 / 10...95
10...20 Nm (M 10)
25 /
6.0...12 Nm (M 8)
mm/-
Note
UL
CSA
600
600
195
250
AWG 2/0...4/0 AWG 2/0...4/0
8/3
B12 / 5VA
Conductor connection with cable lugs according to DIN 46234 with
16..95 mm² and DIN 46235 with 10 .. 50 mm²
Conductor connection with cable lugs acc. to DIN 46234 from 10 .. 95
mm²
Type
Ordering data
Version
Medium yellow
Qty.
SAKG 70 II/GW
10
Order No.
Type
0150420000
SAKG 40 I
Qty.
Order No.
0286820000
10
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QL 2 SAKG32+70
150 A
5
0194000000
QL 2 SAKG40
232 A
5
0194100000
3-pole
QL 3 SAKG32+70
150 A
5
0441500000
QL 3 SAKG40
232 A
5
0263500000
4-pole
QL 4 SAKG32+70
150 A
5
0441600000
QL 4 SAKG40
232 A
5
0409800000
End plate
Width
dark brown
Tropical applications
Order No.
Width
EP 1 SAKG28/32 HP/DBR
2 mm
10
0205100000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 1 SAKG28/32 HP/TF/GE
2 mm
10
0205200000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
TW SAKG28 HP/DBR/2
2 mm
10
0151400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG28 HP/TF/GE/2
2 mm
10
0164600000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
30 mm
5
0326760000
AH 40 SAKG40
38 mm
5
0326860000
End plate / Partition plate
dark brown
Tropical applications
dark brown
Tropical applications
Cover / warning label
Cover / warning label
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.50
AH 32 SAKG32
DEK 5/5
DEK 5/5
SAKG 40 II
95 mm²
40 x 90 x 53
232 / 95
10...95
95 mm²
40 x 90 x 53
232 / 95
10...95
IEC 60947-7-1
IEC
1000
232
95
SAKG 40 II GW
IEC
1000
232
95
?ru#a
IEC
1000
232
95
Rated connection
10...16 / 10...95
10...95 / 10...95
16...20 Nm (M 10)
25 /
10...20 Nm (M 10)
10...20 Nm (M 10)
Conductor connection with cable lugs according to DIN 46234, from 10
.. 95 mm²
Conductor connection with cable lugs according to DIN 46234, from 10
.. 95 mm²
Type
Qty.
Type
10
Order No.
Type
0170520000
SAKG 40 II/GW
Qty.
10
Order No.
Type
0185220000
SAKG 40 III
10
0286920000
Order No.
Type
Qty.
Order No.
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAKG40
232 A
5
0194100000
QL 2 SAKG40
232 A
5
0194100000
QL 3 SAKG40
232 A
5
0263500000
QL 3 SAKG40
232 A
5
0263500000
QL 4 SAKG40
232 A
5
0409800000
QL 4 SAKG40
232 A
5
0409800000
Width
UL
CSA
600
600
195
230
AWG 1...4/0 AWG 2/0...4/0
8/3
B12 / 5VA
ru#a
Rated connection
...16
SAKG 40 II
B
IEC 60947-7-1
UL
CSA
600
600
230
250
AWG 1...4/0 AWG 2/0...4/0
8/3
/ 5VA
?ru#
Rated connection
...16
95 mm²
40 x 98 x 84.5
232 / 95
10...95
IEC 60947-7-1
UL
CSA
600
600
230
250
AWG 1...4/0 AWG 2/0...4/0
8/3
/ 5VA
SAKG 40 III
Width
Qty.
Order No.
Width
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
38 mm
5
0326860000
AH 40 SAKG40
38 mm
5
0326860000
AH 40 SAKG40
38 mm
5
0326860000
AH 40 SAKG40
DEK 5/5
DEK 5/5
SAK-Series TS 32
Special terminals - SAKG
DEK 5/5
B.51
SAK-Series TS 32
Special terminals - SAKG
SAKG 46 II
TS 32 / KrG
150 mm²
SAKG 46 II GW
150 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
46 x 106 x 57
353 / 185
10...185
46 x 106 x 57
353 / 185
10...185
IEC 60947-7-1
IEC 60947-7-1
IEC
1000
309
150
UL
CSA
600
600
285
365
AWG 4/0...300 AWG 4...300
8/3
/ 5VA
IEC
1000
309
150
?ru#a
mm²
mm²
UL
CSA
600
600
285
365
AWG 4/0...kcmil 300 AWG 1...300
8/3
/ 5VA
?ru#
Rated connection
10...16
Rated connection
10...16
14...31 Nm M 12
14...31 Nm M 12
Conductor connection with cable lugs according to DIN 46234, from 10 ..
185 mm² and DIN 46235, from 25 .. 150 mm²
Conductor connection with cable lugs according to DIN 46234, from 10 ..
185 mm² and DIN 46235, from 25 .. 150 mm²
Type
mm/-
Note
Ordering data
Version
Medium yellow
Qty.
SAKG 46 II
5
Order No.
Type
0170620000
SAKG 46 II/GW
Qty.
Order No.
0185320000
5
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
QL 2 SAKG46
309 A
5
0247000000
QL 2 SAKG46
309 A
5
0247000000
3-pole
QL 3 SAKG46
309 A
5
0444400000
QL 3 SAKG46
309 A
5
0444400000
4-pole
QL 4 SAKG46
309 A
5
0444500000
QL 4 SAKG46
309 A
5
0444500000
End plate
Width
dark brown
Tropical applications
Order No.
Width
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
46 mm
5
0326960000
AH 46 SAKG46
46 mm
5
0326960000
End plate / Partition plate
dark brown
Tropical applications
dark brown
Tropical applications
Cover / warning label
Cover / warning label
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.52
AH 46 SAKG46
DEK 5/5
DEK 5/5
SAKG 54 II
240 mm²
SAKG 54 II GW
54 x 122 x 60.5
415 / 240
10...240
54 x 122 x 60.5
415 / 240
10...240
IEC 60947-7-1
IEC 60947-7-1
IEC
1000
415
240
UL
CSA
600
600
380
600
kcmil 300...kcmil 500 kcmil 300...kcmil 500
8/3
/ 5VA
IEC
1000
415
240
?ru#a
240 mm²
B
UL
CSA
600
600
380
600
kcmil 300...kcmil 500 kcmil 300...kcmil 500
8/3
/ 5VA
?ru#
Rated connection
Rated connection
25...60 Nm M 16
25...60 Nm M 16
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 70 .. 240 mm²
Conductor connection with cable lugs according to DIN 46234 and DIN
46235, from 70 .. 240 mm²
Type
Qty.
SAKG 54 II
Type
5
Order No.
Type
0170720000
SAKG 54 II/GW
Qty.
Order No.
0185420000
5
current
Qty.
Order No.
Type
current
Qty.
QL 2 SAKG54
415 A
5
0264400000
QL 2 SAKG54
415 A
5
0264400000
QL 3 SAKG54
415 A
5
0408000000
QL 3 SAKG54
415 A
5
0408000000
QL 4 SAKG54
415 A
5
0247400000
QL 4 SAKG54
415 A
5
0247400000
Width
Order No.
Width
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/DBR
2 mm
10
0205300000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
EP 2 SAKG46/32 HP/TF/GE
2 mm
10
0205400000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/DBR/2
2 mm
10
0177100000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
TW SAKG46 HP/TF/GE/2
2 mm
10
0179900000
DEK 5/5
SAK-Series TS 32
Special terminals - SAKG
DEK 5/5
B.53
SAK-Series TS 32
Stud terminal - KST
KST 5
TS 32 / PA
10 mm²
KST 6
16 mm²
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
24 x 60 x 55
57 /
22 x 60 x 60
76 /
...
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
V
A
mm²
kV/-
IEC
1000
57
10
UL
CSA
600
600
50
65
AWG 12...6
AWG 8...2
8/3
/ V2
IEC
1000
76
16
r#a
r#a
Rated connection
2.0...4.0 Nm
Tightening torque range (clamping screw)
UL
CSA
600
600
65
80
AWG 12...6
AWG 12...6
8/3
/ V2
Rated connection
3.0...6.0 Nm
Note
Ordering data
Version
Type
TS 35 x 7,5
Order No.
Type
KST 5
Qty.
25
9503370000
KST 6
Type
Qty.
Order No.
Type
Qty.
Order No.
9501310000
25
Note
Accessories
Screwable cross-connection
2-pole
Partition plate
Marking systems
Width
Qty.
Order No.
5
9501350000
Width
left
TW KST5-12 LI/NO 160/HM
10
1752800000
TW KST5-12 LI/NO 160/HM
10
1752800000
right
TW KST5-12 RE/NO 160/HM
10
1718530000
TW KST5-12 RE/NO 160/HM
10
1718530000
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.54
current
QL 2 KST6
DEK 5/5
DEK 5/5
KST 8
35 mm²
24 x 60 x 72
125 /
...
IEC
1000
125
35
KST 10
70 mm²
34 x 60 x 82
192 /
...
UL
CSA
600
600
115
130
AWG 12...2
AWG 12...2
8/3
/ V2
IEC
1000
192
70
r#a
Qty.
KST 8
Type
UL
CSA
600
600
175
200
AWG 12...2/0 AWG 12...2/0
8/3
/ V2
25
current
Qty.
Order No.
Type
9501320000
KST 10
Order No.
Type
5
9501360000
QL 2 KST10
TW KST5-12 LI/NO 160/HM
10
1752800000
TW KST5-12 RE/NO 160/HM
10
1718530000
QL 2 KST8
B
UL
CSA
600
600
200
250
AWG 12...3 AWG 12...3/0
8/3
/ V2
r#a
Rated connection
14...31 Nm
Qty.
20
current
Qty.
Order No.
Type
9501330000
KST 12
Order No.
Type
5
9501370000
QL 2 KST12
TW KST5-12 LI/NO 160/HM
10
1752800000
TW KST5-12 RE/NO 160/HM
10
1718530000
Width
DEK 5/5
IEC
1000
232
95
Rated connection
10...20 Nm
Type
95 mm²
34 x 60 x 82
232 /
...
r#a
Rated connection
6.0...12 Nm
KST 12
Qty.
Order No.
9501340000
20
current
Qty.
232 A
5
9501380000
TW KST5-12 LI/NO 160/HM
10
1752800000
TW KST5-12 RE/NO 160/HM
10
1718530000
Width
DEK 5/5
SAK-Series TS 32
Stud terminal - KST
Order No.
Width
DEK 5/5
B.55
SAK-Series TS 32
Terminals with electronic components
DK 4 LD/1
with indication
4 mm²
DC voltage indicator
DK 4 LD/2
4 mm²
DC voltage indicator
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Technical data
6 x 50 x 56.5
10 / 4
0.5...4
6 x 50 x 56.5
10 / 4
0.5...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Electronic fixtures
Diode reverse voltage / Diode current
Operating voltage for display, min. / Current
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
24
10
4
IEC 60947-7-1
UL
CSA
IEC
24
10
4
1/3
A3 / V2
mm²
mm²
mm/-
CSA
1/3
A3 / V2
r#
V/mA
UL
r#
24 / 5
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
24 / 5
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
Note
Ordering data
Version
Type
Red LED
Qty.
DK 4/32 LD ROT 24VDC A1
25
Order No.
Type
0495360000
DK 4/32 LD ROT 24VDC A2
25
0474460000
DK 4/32 LD GR 24VDC A2
25
0646560000
Green LED
Qty.
Order No.
Neon lamp
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Order No.
3-pole
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
External cross-connection
Switchable link
Mounting screw
Switchable link
Connecting sleeve
100
0266800000
BFSC M2.5X14 SAKD2.5N
100
0266800000
VL 2 AKZ4/DK4
50
0446700000
VL 2 AKZ4/DK4
50
0446700000
VH 10/4/2.8 AKZ4
50
0446600000
VH 10/4/2.8 AKZ4
50
0446600000
20
0180400000
50
0215700000
1.5 mm
20
0359260000
6 mm
100
0363360000
BFSC M2.5X14 SAKD2.5N
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
5.4 mm
End plate / Partition plate
beige
AP DK4
Small partition
Small partition
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.56
TSCH 4 AKZ4
DEK 5/6
DEK 5/6
DK 4 LD/3
4 mm²
DC voltage indicator
4 mm²
AC voltage indicator
6 x 50 x 56.5
10 / 4
0.5...4
B
6 x 50 x 56.5
10 / 4
0.33...4
IEC 60947-7-1
IEC
24
10
4
DK 4 GL
IEC 60947-7-1
UL
CSA
IEC
115
10
4
UL
1/3
A3 / V2
CSA
1/3
A3 / V2
#
r#
24 / 5
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
24 / 5
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...1.0 Nm (M 3)
9 / 0.6 x 3.5 mm
Type
Qty.
DK 4/32 LD ROT 24VDC
25
Order No.
Type
Qty.
Type
Order No.
0210160000
DK 4/32 GL 100K 115VAC
25
0569560000
current
Qty.
Order No.
Type
current
Qty.
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
100
0266800000
50
0446700000
50
0446600000
20
0180400000
50
0215700000
1.5 mm
20
0359260000
6 mm
100
0363360000
100
0266800000
BFSC M2.5X14 SAKD2.5N
VL 2 AKZ4/DK4
50
0446700000
VL 2 AKZ4/DK4
VH 10/4/2.8 AKZ4
50
0446600000
VH 10/4/2.8 AKZ4
BFSC M2.5X14 SAKD2.5N
Width
PS 2.3 RT
TSCH 4 AKZ4
DEK 5/6
32 A
Order No.
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
AP DK4
SAK-Series TS 32
Terminals with electronic components
5.4 mm
DEK 5/6
B.57
SAK-Series TS 32
Terminals with electronic components
DK 4 D/1
with diodes
4 mm²
Diode terminal, e.g. as reverse polarity protection
DK 4 D/2
4 mm²
Suppressor circuit for contactor and solenoid valve (DC voltage)
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
6 x 50 x 56.5
10 / 4
0.33...4
6 x 50 x 56.5
10 / 4
0.33...4
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Electronic fixtures
Diode reverse voltage / Diode current
Operating voltage for display, min. / Current
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
380
10
4
UL
CSA
300
10
AWG 22...12
/3
A3 / V2
IEC
380
10
4
r#
A
-/A
mm²
mm²
mm/-
Note
UL
CSA
300
10
AWG 22...12
/3
A3 / V2
r#
1000 / 1
1000 / 1
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Diode current: max 1A. (1 N 4007)
Diode current: max 1A. (1 N 4007)
Ordering data
Version
Type
Red LED
Qty.
DK 4/32 1D CSA GET.SCH.
25
Order No.
Type
0544660000
DK 4/32 1D CSA A1
Qty.
25
Order No.
0484060000
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Order No.
3-pole
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
100
0266800000
BFSC M2.5X14 SAKD2.5N
100
0266800000
50
0446700000
VL 2 AKZ4/DK4
50
0446700000
50
0446600000
VH 10/4/2.8 AKZ4
50
0446600000
20
0180400000
50
0215700000
1.5 mm
20
0359260000
6 mm
100
0363360000
External cross-connection
Switchable link
Mounting screw
Switchable link
Connecting sleeve
BFSC M2.5X14 SAKD2.5N
VL 2 AKZ4/DK4
32 A
VH 10/4/2.8 AKZ4
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
32 A
5.4 mm
End plate / Partition plate
beige
AP DK4
Small partition
Small partition
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.58
TSCH 4 AKZ4
DEK 5/6
DEK 5/6
DK 4 D/3
4 mm²
Suppressor circuit for contactor and solenoid valve (DC voltage)
6 x 50 x 56.5
10 / 4
0.33...4
IEC
380
10
4
DK 4 D/4
4 mm²
Diode terminal for lamp test circuits
6 x 50 x 56.5
10 / 4
0.33...4
UL
CSA
300
10
IEC
380
10
4
DK 4 D/5
4 mm²
Diode terminal for lamp test circuits
B
6 x 50 x 56.5
10 / 4
0.33...4
UL
/3
A3 / V2
CSA
300
10
IEC
380
10
4
UL
/3
A3 / V2
r#
CSA
300
10
/3
A3 / V2
r#
r#
1000 / 1
1000 / 1
1000 / 1
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Diode current: max 1A. (1 N 4007)
Diode current: max 1A. (1 N 4007)
Diode current: max 1A. (1 N 4007)
Type
Qty.
DK 4/32 1D CSA A2
Type
25
Order No.
Type
0467960000
DK 4/32 2D CSA GET.SCH.
Qty.
25
Order No.
Type
0642760000
DK 4/32 2D CSA A2
Qty.
25
Order No.
0523760000
current
Qty.
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
100
0266800000
50
0446700000
50
0446600000
20
0180400000
50
0215700000
1.5 mm
20
0359260000
6 mm
100
0363360000
100
0266800000
BFSC M2.5X14 SAKD2.5N
100
0266800000
BFSC M2.5X14 SAKD2.5N
VL 2 AKZ4/DK4
50
0446700000
VL 2 AKZ4/DK4
50
0446700000
VL 2 AKZ4/DK4
VH 10/4/2.8 AKZ4
50
0446600000
VH 10/4/2.8 AKZ4
50
0446600000
VH 10/4/2.8 AKZ4
BFSC M2.5X14 SAKD2.5N
Width
PS 2.3 RT
AP DK4
TSCH 4 AKZ4
DEK 5/6
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
DEK 5/6
32 A
Order No.
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
SAK-Series TS 32
Terminals with electronic components
5.4 mm
DEK 5/6
B.59
SAK-Series TS 32
Terminals with electronic components
DK 4 D/6
with diodes
4 mm²
Diode terminal for lamp test circuits
DK 4 D/7
4 mm²
Diode terminal for lamp test circuits, with
protective resistor
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
6 x 50 x 56.5
10 / 4
0.33...4
6 x 50 x 56.5
10 / 4
0.33...4
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Electronic fixtures
Diode reverse voltage / Diode current
Operating voltage for display, min. / Current
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
IEC
380
10
4
UL
CSA
300
10
IEC
24
10
4
/3
A3 / V2
mm²
mm²
mm/-
Note
CSA
300
10
/3
A3 / V2
r#
A
-/A
UL
r#
1000 / 1
/1
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Diode current: max 1A. (1 N 4007)
Diode current: max 1A. (1 N 4007)
Ordering data
Version
Type
Red LED
Qty.
DK 4/32 2D A1
25
Order No.
Type
0663960000
DK 4/32 1D 1K5
Qty.
25
Order No.
0685260000
Note
Accessories
Screwable cross-connection
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
Order No.
3-pole
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
External cross-connection
Switchable link
Mounting screw
Switchable link
Connecting sleeve
100
0266800000
BFSC M2.5X14 SAKD2.5N
100
0266800000
VL 2 AKZ4/DK4
50
0446700000
VL 2 AKZ4/DK4
50
0446700000
VH 10/4/2.8 AKZ4
50
0446600000
VH 10/4/2.8 AKZ4
50
0446600000
20
0180400000
50
0215700000
1.5 mm
20
0359260000
6 mm
100
0363360000
BFSC M2.5X14 SAKD2.5N
Testing / Checking
Width
Test plug
Socket
PS 2.3 RT
Width
20
0180400000
PS 2.3 RT
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
1.5 mm
20
0359260000
AP DK4
6 mm
100
0363360000
TSCH 4 AKZ4
5.4 mm
STB 8.5/D4/2.3/M2.5 AKZ
5.4 mm
End plate / Partition plate
beige
AP DK4
Small partition
Small partition
Marking systems
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.60
TSCH 4 AKZ4
DEK 5/6
DEK 5/6
DK 4 RC
with electronic components
4 mm²
DKT 4 PT 100
4 mm²
Diode terminal for central control and communication system
SAK-Series TS 32
Terminals with electronic components
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS32x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
18 x 50 x 56.5
10 / 4
0.33...4
B
6 x 65 x 56.5
10 / 4
0.33...4
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
IEC
230
10
4
V
A
mm²
kV/-
UL
CSA
IEC
250
10
4
/3
A3 / V2
mm/-
CSA
/3
A3 / V2
#
mm²
mm²
UL
#
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...4
0.5...0.8 Nm (M 3)
9 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...2.5
0.4...0.7 Nm (M 2.5)
6 / 0.6 x 3.5 mm
Note
Ordering data
Version
Type
Red LED
Qty.
DK 4/32 RC 220R/220NF
5
Order No.
Type
0692160000
DKT 4/32 PT100
Qty.
10
Order No.
8014730000
Note
Accessories
current
Qty.
Order No.
Type
current
Qty.
2-pole
Type
Q 2 AKZ4
32 A
50
0336400000
Q 2 AKZ4
32 A
50
0336400000
3-pole
Q 3 AKZ4
32 A
50
0336500000
Q 3 AKZ4
32 A
50
0336500000
4-pole
Q 4 AKZ4
32 A
50
0336600000
Q 4 AKZ4
32 A
50
0336600000
2-pole
QB 2 WI RA6 IS
27 A
50
0482700000
QB 2 WI RA6 IS
27 A
50
0482700000
3-pole
QB 3 WI RA6 IS
27 A
50
0482800000
QB 3 WI RA6 IS
27 A
50
0482800000
4-pole
QB 4 WI RA6 IS
27 A
50
0482900000
QB 4 WI RA6 IS
27 A
50
0482900000
Screwable cross-connection
Order No.
External cross-connection
End plate / Partition plate
Width
beige
Width
AP DK4
1.5 mm
20
0359260000
AP DKT4 PA
1.5 mm
20
0687560000
PS 2.3 RT
5.4 mm
20
0180400000
PS 2.3 RT
5.4 mm
20
0180400000
50
0215700000
STB 8.5/D4/2.3/M2.5 AKZ
50
0215700000
100
0363360000
TSCH 4 AKZ4
100
0363360000
Testing / Checking
Test plug
Socket
STB 8.5/D4/2.3/M2.5 AKZ
Small partition
Small partition
Marking systems
TSCH 4 AKZ4
6 mm
6 mm
(see assortment in catalogue 7)
Marking tags
For detailed information on other accessories and applications, refer to the „Accessories“ section
DEK 5/6
DEK 5/6
B.61
SAK-Series TS 32
Earth conductor isolating terminals
SAKT E
6 mm²
green LED
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
B
Width/Length/height with TS35x7.5
mm
max. current / max. cond. cross-section A/mm²
Max. clamping range
mm²
Operating mode
19 x 65 x 53.5
27 / 10
0.5...10
SAKT E
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage / Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Stranded wire with end ferrules
Tightening torque range (clamping screw)
Stripping length / Blade size
V
A
mm²
kV/-
mm²
mm²
mm/-
IEC
60
27
6
UL
CSA
/3
A5 / 5VA
• Slide link is closed
• Auxiliary circuit is earthed
Rated connection
0.5...10
0.5...6 / 0.5...6
0.8...1.6 Nm (M 3.5)
/ 4.0 x 0.8 mm
• Display is illuminated green
Test position
When measuring insulation resistance with voltages
greater than UNom, the earth connection must first
be disconnected.
Note
Ordering data
Version
Type
40...60V~
Qty.
SAKT E/32 2LD 60VAC
5
Order No.
SAKT E
0699020000
Note
Accessories
End bracket
Dark beige Wemid
Type
Width
Qty.
EWK 1
9 mm
50
Order No.
0206160000
• Slide link is opened
• Auxiliary circuit is not earthed
• No earth fault
• Display illuminated green and red with reduced
intensity
• Disconnected earth connection -> When
measuring insulation resistance with voltages
greater than UNom, the earth connection must
be disconnected.
Operational malfunction
SAKT E
• Slide link is opened
• Auxiliary circuit is not earthed
• Earth fault
• Display is illuminated red
(see assortment in catalogue 7)
For detailed information on other accessories and applications, refer to the „Accessories“ section
B.62
To safe the test sockets use the SD-blade or bits with pilots!