Tools and ferrules Contents Tools and ferrules Tools and ferrules Tools and ferrules Cutting, stripping and crimping tools J.2 Rechargeable and electric torque screwdriver J.10 Screwdrivers J.12 Wire end ferrules / Insulated cable lugs J.21 Wire end ferrules with plastic collar J.22 Twin-wire end ferrules with plastic collar J.28 Wire end ferrules for short-circuit and earth-fault-proof cables J.31 Wire end ferrules with plastic collar, spezial sizes J.32 Wire end ferrules without plastik collar J.33 Tools for insulated cable lugs and ferrules J.35 J J.1 Tools and ferrules Tools J Cutter KT 8 KT 12 • C utting formation for different cable sizes increases the quality of the cuts for smaller cross-sections. Notching tool Notching tool Cutting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 8 mm. • Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Cutting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 12 mm. • Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Technical data Max. cutting performance copper cable Solid (max. conductor cross-section) mm2 / AWG Stranded (max. conductor cross-section) mm2 / AWG Flexible (max. conductor cross-section) mm2 / AWG Flexible, Stranded (max. diameter) mm Sector line Max. cutting performance aluminium cable KT8 16 / 6 KT12 16 / 6 16 / 6 16 / 6 8 25 / 3 35 / 2 12 Stranded (max. conductor cross-section) Stranded (max. diameter) Solid Data-/ telephone-/ control cable 16 / 6 25 / 6 8 8 16 25 mm2 / AWG mm mm2 O.D. max. Tool data mm 8 12 Length / width / height Weight mm g 165 / 65 / 25 215 / 66 / 28 180 300 Tool closed Tool closed Information Ordering data Version Type KT 8 Qty. 1 Order No. 9002650000 Type KT 12 Qty. 1 Order No. 9002660000 Information Accessories Type Qty. Information J.2 Order No. Type Qty. Order No. Tools and ferrules Tools WAW 1 WAW 2 KT ZQV Notching tool Notching tool Cutter Tool for trimming poles from WQV 2.5 to WQV 35 cross connections used in Weidmueller W-Series terminals. Tool for punching out the cross-connection windows of the Weidmüller W-Series, Test-disconnect terminal WTR 2.5, Fuse terminal WSI 6. Cutter for non-pinch cutting of Weidmüller Z-series cross-connections. Technical data Technical data Technical data Length Weight 167 mm 227 g Ordering data Type WAW 1 Length Weight 205 mm 338 g Ordering data Qty. 1 Order No. 9004500000 Type WAW 2 Length Weight 215 mm 300 g Ordering data Qty. 1 Order No. 9004510000 Type KT ZQV Qty. 1 Order No. 9002170000 J.3 J Tools and ferrules Tools Stripping and cutting tools stripax® stripax® 16 Stripping and cutting tool for flexible conductors with PVC-insulation of 0.08...6 mm2 (~AWG 28...10) • No damaging of the conductor due to special, self-adjustable stripping blades • Processing of multi-conductors, with thin flat ribbon cables even multiple conductors in one operation Stripping and cutting tool for flexible and massive conductors with PVC-insulation of 6...16 mm2 (~AWG 10... 6) • Cutting of flexible and massive conductors up to 6 mm2 (AWG 10) • No damaging of the conductor due to special blade forms • F or flexible and massive conductors with PVCinsulation • Stripping length adjustable with shoulder • automatic opening of the clamping jaws after stripping • no splicing of the single conductor • adjustable to different insulation thicknesses • cable with double insulation in two processing steps without special adjustment • Blade-device free from float and self-adjustable • long durability • optimised ergonomically design J Technical data Max. stripping performance Cable model Conductor cross-section Conductor diameter Max. stripping length Adjustable depth of cut Cutting performance Max. cutting performance stripax® flexible & solid conductors with PVC insulation stripax® 16 flexible & solid conductors with PVC insulation mm2 mm mm mm 0.08 … 6 6 … 16 20 20 mm2 6 6 190 190 155 155 Tool data Length Weight mm g Information Ordering data Version Type STRIPAX Qty. 1 Order No. 9005000000 Type STRIPAX 16 Qty. 1 Order No. 9005610000 Information Accessories Information J.4 Type Cleaning brush Qty. 5 Order No. 9005450000 Type Cleaning brush Qty. 5 Order No. 9005450000 Spare stripping blades 9054030000 Spare stripping blades 9054080000 1 1 Crimping and cutting tool for wire end ferrules • • • • • • • Cutting Stripping Crimping Conductor entry sideways Wire end ferrules acoording to DIN 46228-4 Ratchet for precise crimping Efficient operation: Change of tools not necessary, therefore significant saving of time • automatic transport of wire end ferrules • O nly wire end ferrules in strips of 50 pieces may be used with this tool. The use of wire end ferrules on reels can lead to damage. Tools and ferrules Tools stripax® plus 2.5 Cutting, stripping and crimping tool for wire end ferrules Cutting, stripping and crimping tool for linked wire end ferrules on strip with 0.5...2.5 mm2 (~AWG 20...14) from Weidmüller • Easy handling of wire end ferrules • Automatic feeding of wire end ferrules J Technical data Description of contact Type of contact Crimping range Crimping range 1 (with multiple crimping positions) Crimping range 2 (with multiple crimping positions) Crimping range 3 (with multiple crimping positions) Plug width stripax® plus 2.5 Strip of wire end ferrules mm2 mm2 mm2 mm2 mm 0.5 ... 2.5 0.5 ... 0.75 1 ... 1.5 2.5 Tool data Length Weight Information mm g 210 260 Only Weidmüller wire end ferrules on strips à 50 pieces may be used. Ordering data Version Type stripax plus 2,5 Information Spare cutter (order no.: 9050340000) Qty. 1 Order No. 9020000000 Accessories Information J.5 Tools and ferrules Tools Crimping tools for wire end ferrules PZ 4 PZ 6/5 • Ratchet for precise crimping • Release mechanism in case of incorrect operation • Entry for wire end ferrule on the side Crimping tool for wire end ferrules from 0.5...4 mm2 Crimping tool for wire end ferrules from 0.25...6 mm2 Crimping tool for wire end ferrules (to DIN 46228 part 1 and 4) with and without plastic collar and twin wire end ferrules of 0.5...2.5 mm2 • Only one crimping station for the whole crosssection Crimping tool for wire end ferrules (to DIN 46228 pt. 1 and 4) with and without plastic collar of 0.25...6 mm2 (~ AWG 24...10) and twin wire end ferrules of 0.5...4.0 mm2 • Crimp according to Euro-Norm EN 60947-1 • Five crimping stations corresponding to the conductor cross-section • Approval according to VG 95211 (military designation VG 95 236 T 14 B 002) J Technical data Description of contact Type of contact Crimping range Crimping range 1 (with multiple crimping positions) Crimping range 2 (with multiple crimping positions) Crimping range 3 (with multiple crimping positions) Crimping range 4 (with multiple crimping positions) Crimping range 5 (with multiple crimping positions) mm2 mm2 mm2 mm2 mm2 mm2 PZ 4 Wire end ferrules with/without plastic collar PZ 6/5 Wire end ferrules with/without plastic collar 0.5 ... 4 0.25 ... 6 0.25 ... 0.5 0.75 ... 1.5 2.5 4 6 Tool data Length Weight mm g 200 200 448 423 Information Ordering data Version Information Accessories Information J.6 Type PZ 4 Qty. 1 Order No. 9012500000 Type PZ 6/5 Qty. 1 Order No. 9011460000 Tools and ferrules Tools Crimping tools for wire end ferrules PZ 3 PZ 6 roto • Ratchet for precise crimping • Release mechanism in case of incorrect operation Crimping tool for wire end ferrules from 0.5...6 mm2 Crimping tool for wire end ferrules from 0.14...6 mm2 Crimping tool for wire end ferrules of 0.5...6 mm2 with and without plastic collar according to DIN 46228 part 1 and 4 (~ AWG 20...10) and twin-wire end ferrules of 0.5...4 mm2 • Only one die for the whole cross-section • Wire end ferrule insertion from the front Crimping tool for wire end ferrules of 0.14...6 mm2 with and without plastic collar to DIN 46228 part 1 and 4 (~ AWG 26...10) and twin-wire end ferrules of 0,5...4 mm2 • Only one die for the whole cross-section • Pivoted die for wire end ferrule-insertion • Wire end ferrule insertion from the front or from the side J Technical data Description of contact Type of contact Crimping range Crimping range 1 (with multiple crimping positions) Crimping range 2 (with multiple crimping positions) Crimping range 3 (with multiple crimping positions) Plug width mm2 mm2 mm2 mm2 mm PZ 3 Wire end ferrules with/without plastic collar PZ 6 roto Wire end ferrules with/without plastic collar 0.5 ... 6 0.14 ... 6 200 200 426 428 Tool data Length Weight mm g Information Ordering data Version Type PZ 3 Qty. 1 Order No. 0567300000 Type PZ 6 roto Qty. 1 Order No. 9014350000 Information Accessories Information J.7 Tools and ferrules Tools Crimping tools for wire end ferrules PZ 16 PZ ZH 16 • Ratchet for precise crimping • Release mechanism in case of incorrect operation • Entry for wire end ferrule on the side Crimping tool for wire end ferrules from 6...16 mm2 Crimping tool for twin wire end ferrules, 6...16 mm2 Crimping tool for wire end ferrules (to DIN 46228 part 1 and 4) with and without plastic collar from 6...16 mm2 (~ AWG 10...6) • Three crimping stations corresponding to the conductor cross-sections • Crimp according to Euro-Norm EN 60947-1 • Approval according to VG 95211 (military designation VG 95 236 T 14 B 002) Crimping tool for twin wire end ferrules (to DIN 46228 pt.4) with plastic collar from 6...16 mm2 (~AWG 10...6) • Three crimping stations corresponding to the conductor cross-sections J Technical data Description of contact Type of contact Crimping range Crimping range 1 (with multiple crimping positions) Crimping range 2 (with multiple crimping positions) Crimping range 3 (with multiple crimping positions) Plug width mm2 mm2 mm2 mm2 mm PZ 16 Wire end ferrules with/without plastic collar PZ ZH 16 Twin wire end ferrules 6 ... 16 6 10 16 6 ... 16 6 10 16 200 260 418 700 Tool data Length Weight mm g Information Ordering data Version Information Accessories Information J.8 Type PZ 16 Qty. 1 Order No. 9012600000 Type PZ ZH 16 Qty. 1 Order No. 9013600000 Crimping tools for wire end ferrules PZ 50 • Ratchet for precise crimping • Release mechanism in case of incorrect operation Crimping tool for wire end ferrules with 25, 35 and 50 mm2 Tools and ferrules Tools Crimping tool for wire end ferrules of 25, 35 and 50 mm2 with and without plastic collar to DIN 46228 part 1 and 4(~ AWG 3...1) • Three crimping stations corresponding to the conductor cross-sections • Crimp according to Euro-Norm EN 60947-1 • Approval according to VG 95211 (military designation VG 95 236 T 14 B 002) J Technical data Description of contact Type of contact Crimping range Crimping range 1 (with multiple crimping positions) Crimping range 2 (with multiple crimping positions) Crimping range 3 (with multiple crimping positions) Plug width PZ 50 Wire end ferrules with/without plastic collar mm2 mm2 mm2 mm2 mm 25 ... 50 25 35 50 Tool data Length Weight mm g 260 700 Information Ordering data Version Type PZ 50 Qty. 1 Order No. 9006450000 Information Accessories Information J.9 Tools and ferrules Tools Rechargeable torque screwdriver DMS 3 DMS 3 Set DMS 3 rechargeable torque screwdriver • O ne-hand operation under all working conditions • Switchable forward and reverse • Two speeds: 200 and 400 rpm • Precise torque settings from approx. 0.2 ... 3 Nm in 6 steps • Consistent performance during battery discharge • Grip swings easily from rod to pistol form • Takes 1/4" bits held ball-bearing clamping mechanism (form E6.3) • Safety lock prevents inadvertent operation • Easy changeover from battery drive to manual operation up to 15 Nm J Technical data Screwdriver Motor Idling speed Max. torque Chuck Length Weight Battery 2.4 V DC 200/400 min-1 3.0 Nm 1/4" E 6.3 DIN 3126 239 mm 400 g Type Weight Charger 2 Ni-Cd batteries each 1.2 V Input Output Charging time Weight 230 V AC, 50 Hz, 50 mA 122 g 2.9 V AC, 1.4 A, 4.1 VA 1 hour 700 g Ordering data Type DMS 3 Screwdriver incl. battery Qty. 1 Order No. 9007440000 Order No. 9007470000 DMS 3 set 2 (as set1 with 1 additional battery) 9007480000 *) refer to figure Accessories J.10 Type Qty. DMS 3 set 1 (screwdriver incl. battery, 1 charger, bits, plastic carrying case)* Type Spare battery Qty. 1 Order No. 9007450000 Charger 9007460000 1 1 Electric torque screwdriver Tools and ferrules Tools DMS 2 Set • T orque adjustable in four steps for standard screws M2.5 to M4 • Selectable electric power cut-off upon reaching a preselected torque • High repetition accuracy • Start-up in low gear and switchover to operating rpm is controlled via the pressure on the screw head • Switchable forward and reverse • Fatigue-free working due to ergonomic design and low weight • Ideal design for one-hand operation under all working conditions and at different working locations • Low noise • Low energy consumption Technical data Rated voltage Frequency Rated power Current consumption rpm of spindle in search gear in working mode Torques 230 V Level 1 (M 2.5) Level 2 (M 3) Level 3 (M 3.5) Level 4 (M4) 0.5 ± 0.1 Nm Weight incl. supply cable Weight Noise level to DIN 45 634 0.990 kg 60 Hz 45 W 0.2 A 350 min-1 J 700 min-1 0.7 ± 0.15 Nm 1.2 ± 0.2 Nm 1.7 ± 0.25 Nm 0.820 kg 58 db (A) Protection class II to DIN 57 740 DIN/VDE 0740 T.1 and T.2 EMC to EC directive 89/336/EWG CE mark Ordering data Standard equipment Type DMS 2 with 1/4" drive Form E 6.3 DIN 3126 with hang-up clip and 4 bits for slotted screws (Length: 50 mm) Blade dimensions 0.5 x 3 / 0.6 x 3.5 / 0.8 x 4 / 1.0 x 5.5 Qty. 1 Order No. 0664600000 Type BAL 2 (balancer for hanging up the DMS 2) Qty. 1 Order No. 0181800000 Accessories Balancer for hanging up the DMS 2 J.11 Tools and ferrules Tools Screwdrivers Screwdrivers Weidmüller screwdrivers come in four different grip sizes, and are the result of a consistent grip concept which takes into account both the human hand and the different requirements when working • Perfect handling with all grip sizes • Maximum torques • Optimum transmission of axial force • Complete range including all commercial dimensions J SoftFinish-grip SoftFinish electric With the SoftFinish zone for use in dry conditions and for general applications, Weidmüller offers a complete range of screwdrivers that enables far higher torques and at the same time substantially more comfort due to the soft material of the grip. VDE-insulated screwdriver according to DIN EN 60900, IEC 900 for work on live equipment Product benefits: • Made of special soft material which is kind to the skin, the SoftFinish zone enables maximum torques • Perfect ergonomic grip design for comfortable screw driving and optimum handling • Version with solid steel tip can be used for chiselling • You can choose from long-life extremely stressable blades in standard sizes • ChromTop blade tip offers maximum corrosion protection and greatest possible dimensional accuracy of the blade geometry in the screw head over many years J.12 Product benefits: • The protective insulation directly injected onto the screwdriver blade ensures electrical safety, even in critical applications • Safe for working at up to 1500 volts DC and 1000 volts AC • Each screwdriver is individually tested in a water bath at 10,000 volts according to DIN EN 60900 • Perfect ergonomic grip design for comfortable screw driving and optimum handling • Made of special soft material which is kind to the skin, the SoftFinish zone prevents slipping in critical situations and at the same time enables maximum torques Combined cutting and screw driving tool swifty® Tools and ferrules Tools swifty®set that does not damage the edge; for cutting of copper cables with a diameter of up to 1.5 mm2 solid and 2.5 mm2 flexible. swifty® • C able cutting tool to mount on non-insulated screw drivers with a blade diameter of 3.5 mm • Minimum manual force required • Automatic opening of the cutter • Ergonomically designed grip swifty®set • Efficient operation: • Only one tool for cable-processing in IDC-technology • Suitable for screw and tension clamps • Readily available pocket size • For right-handed and left-handed use • One-hand operation J Technical data Maximum cutting capacity Copper cable: Solid cable (conductor cross-section) Flexible cable (conductor cross-section) Tool data Length x width x height Weight mm2 mm2 mm g 1.5 2.5 35 / 18 / 40 20 Ordering data Type swifty® (without screwdriver) Qty. 1 Order No. 9006020000 Type swifty®set (with screwdriver) Qty. 1 Order No. 9006060000 Screwdriver (SD 0.6 3.5x100) 9008330000 1 J.13 Tools and ferrules Tools VDE insulated screwdriver VDE insulated screwdriver sets, for working on live parts up to 1000 V AC and 1500 V DC, DIN EN 60900, IEC 900. safety tested GS, every one tested. Blade made from fully hardend, high-alloy chromium-vanadiummolybdenum steel, gunmetal finish. Type Size / SW A B C Order No. 0.4 0.5 0.6 0.8 1.0 1.0 1.2 1.6 0.4 1.0 1.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 8.0 2.0 4.5 5.5 80 100 100 100 125 125 125 175 60 175 175 9008370000 9008380000 9008390000 9008400000 9008910000 9008410000 9025870000 9008430000 9205690000 9205700000 9205710000 SDI S VDE insulated slot-head screwdriver, SDI DIN 7437, ISO 2380/2, output to DIN 5264, ISO 2380/1, SoftFinish grip SDI 0.4 x 2.5 x 75 SDI 0.5 x 3.0 x 100 SDI 0.6 x 3.5 x 100 0.8 x 4.0 x 100 SDI 1.0 x 4.5 x 125 SDI 1.0 x 5.5 x 125 SDI 1.2 x 6.5 x 150 SDI 1.6 x 8.0 x 175 SDI 0.4 x 2.0 x 60 SDI 1.0 x 4.5 x 175 SDI 1.0 x 5.5 x 175 SDIK PH VDE insulated crosshead screwdriver, for Phillips screws, SDIK PH DIN 7438, ISO 8764/2-PH, output to ISO 8764-PH, SoftFinish grip SDIK PH0 SDIK PH1 0 1 60 80 9008560000 9008570000 SDIK PH2 SDIK PH3 2 3 100 150 9008580000 9008590000 SDIK PZ1 SDIK PZ2 1 2 80 100 9008900000 9008890000 SDI T8 SDI T10 SDI T15 SDI T20 SDI T25 SDI T30 SDI T35 8 10 15 20 25 30 40 60 80 80 80 80 100 150 9201940000 9009640000 9009650000 9009660000 9009670000 9009680000 9009690000 SKI 5.0 x 125 SKI 5.5 x 125 SKI 6.0 x 125 SKI 7.0 x 125 SKI 8.0 x 125 SKI 9.0 x 125 SKI 10.0 x 125 SKI 11.0 x 125 SKI 13.0 x 125 5 5.5 6 7 8 9 10 11 13 125 125 125 125 125 125 125 125 125 9009000000 9008990000 9008980000 9008970000 9008960000 9008950000 SDIK PZ VDE insulated crosshead screwdriver type Pozidriv SDIK PZ DIN 7438, ISO 8764/2-PZ, output to ISO 8764-PZ, SoftFinish grip J SDIT VDE insulated Torx®-screwdriver, SDIT SoftFinish grip SKI VDE insulated hexagon socket wrench, SKI SoftFinish grip Information J.14 9008940000 9008930000 9008920000 Tools and ferrules Tools Uninsulated screwdriver Weidmüller SoftFinish screwdriver for general uses, blade made from fully hardened, high-alloy chromium-vanadium-molybdenum steel, matt chrome finish. Type Size / SW A B C Order No. 0.4 0.4 0.5 0.6 0.6 0.8 1.2 0.8 1.0 2.0 2.5 3.0 3.5 3.5 4.0 6.5 4.5 5.5 60 75 80 100 200 100 150 125 150 9037160000 9009030000 9008320000 9008330000 9010110000 9008340000 9009010000 9009020000 9008350000 SDI S Slotted screwdriver with round blade SD DIN 5265, ISO 2380/2, output to DIN 5264, ISO 2380/1, ChromTop tip, SoftFinish grip SD 0.4 x 2.0 x 60 SD 0.4 x 2.5 x 75 SD 0.5 x 3.0 x 80 SD 0.6 x 3.5 x 100 SD 0.6 x 3.5 x 200 SD 0.8 x 4.0 x 100 SD 1.2 x 6.5 x 150 SD 0.8 x 4.5 x 125 SD 1.0 x 5.5 x 150 SDK PH Crosshead screwdriver, Phillips, SDK PH DIN 5262, ISO 8764/2-PH, ouput to ISO 8764-PH, ChromTop tip, SoftFinish grip SDK PH0 SDK PH1 0 1 60 80 9008470000 9008480000 SDK PH2 SDK PH3 2 3 100 150 9008490000 9008500000 SDK PZ0 SDK PZ1 SDK PZ2 SDK PZ3 0 1 2 3 60 80 100 150 9008520000 9008530000 9008540000 9008550000 SDK PZ Crosshead screwdriver, Pozidriv, SDK PZ DIN 5262, ISO 8764/2-PZ, ouput to ISO 8764/1-PZ, ChromTop tip, SoftFinish grip J SD TH Torx® TH screwdriver with hole in tip of blade (tamper-tesistant), SD TH for screwing Torx® and Torx®-TH security screws (pin in centre of Torx recess), ChromTop tip, SoftFinish grip SD TH8 SD TH10 SD TH15 SD TH20 SD TH25 SD TH30 8 10 15 20 25 30 60 80 80 100 100 115 9009190000 9009180000 9009170000 9009160000 9009150000 9009140000 5.5 6 7 8 9 10 11 12 13 125 125 125 125 125 125 125 125 125 9009120000 9009110000 9009100000 9009090000 9009080000 9009070000 . SK Hexagon socket wrench SK DIN 3125, ouput to DIN 3125, SoftFinish grip SK 5.5 x 125 SK 6.0 x 125 SK 7.0 x 125 SK 8.0 x 125 SK 9.0 x 125 SK 10.0 x 125 SK 11.0 x 125 SK 12.0 x 125 SK 13.0 x 125 9009060000 9009050000 9009040000 Information J.15 Tools and ferrules Tools Wrench set Weidmüller Allen key made from fully hardened, high-alloy chromium-vanadiumsteel, to DIN ISO 2936 L (DIN 911), surface high-quality refined. Type Size / SW A B C Order No. SK WSD S 1.5 2 2.5 3 4 5 6 8 10 9-piece offset screwdriver set in Prostar holder, with MagicRing: holds standard screws (size 3 and larger) in any position thanks to spring steel ring, with ball point: for working at angles up to 25°. 9008850000 SK WSD-S 1.5-10.0 SK S 2 2.5 7-piece Allen key set 3 4 5 8 6 9008860000 SKS 2.0-8.0 SK S 2 2.5 3 4 5 6 8 7-piece Allen key set with MagicRing and ball point: holds standard screws (size 3 and larger) in any position thanks to spring steel ring, with ball point: for working at angles up to 25°. J 9008870000 SKS 2.0-8.0 MR TH S 9 10 15 20 25 27 30 40 8-piece Torx®-TH screwdriver set with hole in the blade point (tamper-proof), for screwing Torx® and Torx®-TH tamper-proof screws (centre pin in profile) TH-S 9-40 Information J.16 9008880000 Tools and ferrules Tools DMS manual / DMSI manual Torque screwdrivers with insulation up to 1000 V (VDE) • DMSI manual The “DMSI manual” with integral window torque scale combined with a Weidmüller 1000 V insulated (VDE) interchangeable blade ensures controlled tightening of screws plus reliability in electrical applications. Every 1000 V insulated handle (VDE) and blade (VDE) is tested and provides the necessary safety up to 1000 V AC/1500 V DC. Torque screwdrivers • DMS manual Scale This is a versatile tool suitable for a variety of jobs, with integral scale for easy reading of the torque value plus a Weidmüller interchangeable blade. J Each model is available with two torque ranges: • 0.5 to 1.7 Nm • 2.0 to 8.0 Nm • setting tool included Advantages: • Compact and especially lightweight design • Torque set with special tool (included) to ensure the right setting • Ergonomic handle size to match the torque range • Every tool checked and given an ID No., 100% quality control with verification and product reference • Audible, unmistakable click upon reaching the torque, no unnecessary effort • Interchangeable blade made from high-quality wear-resistant tool steel • All tools comply with the accuracy stipulations of: EN ISO 6798, BS EN 26789, ASME B107.14M • Operating accuracy: ±6% of set scale value Setting tool J.17 Tools and ferrules Tools Uninsulated torque screwdriver Type Size / SW A B C Order No. DMS manual Torque-screwdriver EN ISO 6798, BS EN 26789, ASME B107.14M 9918370000 9918380000 DMS MANUELL 0.5-1.7 DMS MANUELL 2.0-8.0 0.5 - 1.7 Nm 2.0 - 8.0 Nm WK S 0.4 x 2.5 WK S 0.5 x 3.0 max. 0.6 Nm max. 0.6 Nm 0.4 0.5 2.5 3.0 175 175 9918520000 9918530000 WK S 0.6 x 3.5 WK S 0.8 x 4.0 WK S 1.0 x 5.5 max. 1.1 Nm max. 2.5 Nm max. 3.8 Nm 0.6 0.8 1.0 3.5 4.0 5.5 175 175 175 9918540000 9918550000 9918560000 WK K PZ0 WK K PZ1 WK K PZ2 max. 0.9 Nm max. 3.8 Nm max. 5.5 Nm 175 175 175 9918600000 9918610000 9918620000 WK K PH0 WK K PH1 WK K PH2 max. 0.9 Nm max. 3.8 Nm max. 5.5 Nm 175 175 175 9918570000 9918580000 9918590000 WK K S Interchangeable blades for torque-screwdriver output according to DIN 5264, ISO 2380/1 WK K PZ Interchangeable blades for torque-screwdriver output according to DIN 5260-PZ, ISO 8764/1-PZ J WK K PH Interchangeable blades for torque-screwdriver output according to DIN 5260-PH, ISO 8764/1-PH Information J.18 Tools and ferrules Tools VDE insulated torque screwdriver VDE insulated torque screwdriver Weidmüller SoftFinish electric for work on live parts up to 1000 Vac and 1500 Vdc, DIN EN 60900, IEC 900. GS symbol, every one tested. Type Size / SW A B C Order No. DMSI manual VDE insulated torque-screwdriver EN ISO 6798, BS EN 26789, ASME B107.14M 9918390000 9918400000 DMSI MANUELL 0.5-1.7 DMSI MANUELL 2.0-8.0 0.5 - 1.7 Nm 2.0 - 8.0 Nm WK SI 0.4 x 2.5 WK SI 0.5 x 3.0 max. 0.6 Nm max. 0.6 Nm 0.4 0.5 2.5 3.0 175 175 9918410000 9918420000 WK SI 0.6 x 3.5 WK SI 0.8 x 4.0 WK SI 1.0 x 5.5 max. 1.1 Nm max. 2.5 Nm max. 3.8 Nm 0.6 0.8 1.0 3.5 4.0 5.5 175 175 175 9918430000 9918440000 9918450000 WK IK PH0 WK IK PH1 WK IK PH2 max. 0.9 Nm max. 3.8 Nm max. 5.5 Nm 175 175 175 9918460000 9918470000 9918480000 WK SI VDE insulated interchangeable blades for VDE insulated torquescrewdriver output according to DIN 5264, ISO 2380/1 WK IK PH VDE insulated interchangeable blades for VDE insulated torquescrewdriver output according to DIN 5260-PH, ISO 8764/1-PH J WK IK PZ VDE insulated interchangeable blades for VDE insulated torquescrewdriver output according to DIN 5260-PZ, ISO 8764/1-PZ WK IK PZ0 WK IK PZ1 WK IK PZ2 max. 0.9 Nm max. 3.8 Nm max. 5.5 Nm 175 175 175 9918490000 9918500000 9918510000 Information J.19 Tools and ferrules Tools J IS 4, IS 6, IS 8 IS 2 KG; IS 3 KG; IS 4 KG BIT E6.3Z, SDIZ Allen key Hexagon screwdriver for fixing sockets Allen key, with spigot • Surface nickel-plated • Made from hardened chromium-vanadium steel • According to DIN 6911 • Designed for screws to DIN 6912 Hexagon screwdriver with cross-grip made from high-quality plastics • Surface nickel-plated • Made from hardened chromium-vanadium steel • According to DIN 6911 • Designed for screws to DIN 6912 Bits and screwdrivers with shouldered blades for fixing sockets to the Weidmüller range of modular terminals. • No damage to walls around contacts • Made from hardened chrome-vanadium steel • Suitable for all Weidmüller sockets • Bit holders available for E6.3 • DIN 3126 for bits and DIN EN 60900, IEC 900 for screwdrivers Technical data Technical data Technical data Ordering data Ordering data Ordering data Type IS 4 Qty. 1 Order No. 0485100000 Type IS 2 KG Qty. 1 Order No. 1806630000 Type BIT E6.3Z Blade 0.8 x 4.0 x 39 Order No. 9025590000 IS 6 IS 8 0407900000 0235000000 IS 3 KG IS 4 KG 1806650000 1806660000 BIT E6.3Z 0.6 x 3.5 x 39 9025570000 SDIZ SDIZ 9008460000 9008450000 J.20 1 1 1 1 0.8 x 4.0 0.3 x 3.5 Tools and ferrules Wire end ferrules / Insulated cable lugs Wire end ferrules / Insulated cable lugs Weidmüller stocks a comprehensive range of wire end ferrules and insulated cable lugs for immediate supply. Wire end ferrules Wire end ferrules ensure the long-term quality of electrical connections. Another advantage is their usefulness during installation. The wide range of products embraces wire end ferrules with or without plastic collars and twin wire end ferrules in all the colours normally required by users. J Insulated cable lugs Insulated cable lugs ensure the long-term quality of electrical connections. Most of the products in the range (apart from the butt connectors) have a conical inlet. This guarantees optimum entry of the conductor as the strands are automatically centred. J.21 ø D2 ø D1 L2 L1 Weidmüller colour code packed loose J Weidmüller colour code in multipack bag J.22 S2 S1 Tools and ferrules Wire end ferrules with plastic collar • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request For conductors from 0.14 to 150 mm2 (AWG 26-300MCM) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.25/10 ø mm2 0.25 AWG 24 L1 10.0 L2 6.0 D1 0.8 D2 1.8 S1 0.15 H0.25/12 H0.34/10 H0.34/12 H0.5/12 H0.5/14 H0.5/16 H0.75/12 H0.75/14 H0.75/16 H0.75/18 H1.0/12 H1.0/14 H1.0/16 H1.0/18 H1.5/14 H1.5/16 H1.5/24 H2.5/14D H2.5/18D H2.5/24D H4.0/17D H4.0/20D H4.0/26D H6.0/20 H6.0/26 H10.0/22 H10.0/28 H16.0/24 H16.0/28 H25.0/30 H25.0/36 H35.0/30 H35.0/39 H50.0/36 H70.0/40 H95.0/44 H120.0/50 0.25 0.34 0.34 0.50 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 4.00 6.00 6.00 10.00 10.00 16.00 16.00 25.00 25.00 35.00 35.00 50.00 70.00 95.00 120.00 24 22 22 20 20 20 18 18 18 18 17 17 17 17 16 16 16 14 14 14 12 12 12 10 10 7 7 6 6 3 3 2 2 1 2/0 3/0 4/0 12.0 10.0 12.0 12.0 14.0 16.0 12.0 14.0 16.0 18.0 12.0 14.0 16.0 18.0 14.0 16.0 24.0 14.0 18.0 24.0 17.0 20.0 26.0 20.0 26.0 22.0 28.0 24.0 28.0 30.0 36.0 30.0 39.0 36.0 37.0 44.0 50.0 8.0 6.0 8.0 6.0 8.0 10.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 8.0 10.0 18.0 8.0 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 18.0 16.0 22.0 16.0 25.0 20.0 20.0 25.0 30.0 0.8 0.8 0.8 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.7 1.7 1.7 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 5.8 5.8 7.3 7.3 8.3 8.3 10.3 12.7 14.7 16.5 1.8 2.0 2.0 2.6 2.6 2.6 2.8 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.5 3.5 3.5 4.2 4.2 4.2 4.8 4.8 4.8 6.3 6.3 7.6 7.6 8.8 8.8 11.2 11.2 12.7 12.7 15.0 16.0 18.0 21.0 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.35 0.35 0.5 S2 Stripping length Colour 0.25 8.0 l light blue 0.25 10.0 l light blue 0.25 8.0 l turquoise 0.25 10.0 l turquoise 0.25 8.0 l orange 0.25 10.0 l orange 0.25 12.0 l orange 0.25 8.0 m white 0.25 10.0 m white 0.25 12.0 m white 0.25 14.0 m white 0.25 8.0 l yellow 0.25 10.0 l yellow 0.25 12.0 l yellow 0.25 15.0 l yellow 0.25 10.0 l red 0.25 12.0 l red 0.25 20.0 l red 0.25 10.0 l blue 0.25 14.0 l blue 0.25 20.0 l blue 0.3 12.0 l grey 0.3 14.0 l grey 0.3 20.0 l grey 0.3 14.0 l black 0.3 20.0 l black 0.4 15.0 l ivory 0.4 21.0 l ivory 0.4 15.0 l green 0.4 21.0 l green 0.4 18.0 l brown 0.4 24.0 l brown 0.4 19.0 l beige 0.4 28.0 l beige 0.5 26.0 l olive green 0.6 26.0 l yellow 0.6 31.0 l red 0.7 36.0 l blue H150.0/54 150.00 300 MCM 54.0 32.0 18.5 23.5 0.5 0.75 38.0 l yellow Qty. 500 Order No. 9025740000 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 100 100 100 100 100 100 100 50 50 50 50 50 25 25 25 9025760000 9025750000 9025770000 0409500000 0690700000 9025870000 0409600000 0462900000 9025860000 9025910000 0409700000 0463000000 9025950000 9025930000 0463100000 0635100000 0565600000 9019160000 9019170000 9019180000 9019190000 9019200000 9019210000 0533500000 0565700000 0534200000 0565800000 0565900000 0566000000 0317000000 0317100000 0317200000 0317300000 0444200000 9028200000 9028210000 9028220000 25 9028230000 Qty. 500 Order No. 9005180000 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 9028240000 250 9026010000 Ordering data Type H0.14/10 ø mm2 0.14 AWG 26 L1 10.0 L2 6.0 D1 0.6 D2 1.5 S1 0.15 H0.14/12 H0.25/10 H0.25/12 H0.34/10 H0.34/12 H0.5/10 H0.5/14 H0.5/16 H0.75/12 H0.75/14 H0.75/16 H0.75/18 H1.0/12 H1.0/14 H1.0/16 H1.0/18 H1.5/14 H1.5/16 H2.5/14 0.14 0.25 0.25 0.34 0.34 0.50 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.50 1.50 2.50 26 24 24 22 22 20 20 20 18 18 18 18 17 17 17 17 16 16 14 12.0 10.0 12.0 10.0 12.0 10.0 14.0 16.0 12.0 14.0 16.0 18.0 12.0 14.0 16.0 18.0 14.0 16.0 14.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 10.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 8.0 10.0 8.0 0.6 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.7 1.7 2.2 1.5 1.8 1.8 2.0 2.0 2.6 2.6 2.6 2.8 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.5 3.5 4.2 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length Colour 0.25 8.0 l grey 0.25 10.0 l grey 0.25 8.0 ● light blue 0.25 10.0 ● light blue 0.25 8.0 l turquoise 0.25 10.0 l turquoise 0.25 8.0 l orange 0.25 10.0 l orange 0.25 12.0 l orange 0.25 8.0 m white 0.25 10.0 m white 0.25 12.0 m white 0.25 14.0 m white 0.25 8.0 l yellow 0.25 10.0 l yellow 0.25 12.0 l yellow 0.25 15.0 l yellow 0.25 10.0 l red 0.25 12.0 l red 0.25 10.0 l blue H4.0/17 4.00 12 17.0 10.0 2.8 4.8 0.2 0.3 12.0 l grey 9026050000 9025780000 9026030000 9025790000 9028260000 9026060000 9028270000 9028280000 9026070000 9028290000 9028300000 9028310000 9026080000 9028320000 9028340000 9026090000 9028350000 9026100000 Weidmüller colour code Strip of wire end ferrules Weidmüller colour code Reel of wire end ferrules S2 S1 L1 • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request Tools and ferrules L2 ø D2 ø D1 Wire end ferrules with plastic collar For conductors from 0.5 to 2.5 mm2 (AWG 22-14) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/14 ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 Qty. 500 Order No. 9004270000 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 l orange 0.25 10.0 m white 0.25 10.0 l yellow 0.25 10.0 l red H0.75/14 H1.0/14 H1.5/14 0.75 1.00 1.50 18 17 16 14.0 14.0 14.0 8.0 8.0 8.0 1.2 1.4 1.7 2.8 3.0 3.2 500 500 500 9004290000 9004320000 9004340000 H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 500 9004360000 Qty. 5000 Order No. 9004390000 5000 5000 5000 5000 9005810000 9005820000 9005830000 9005840000 3000 9005850000 11.0 l blue Ordering data Type H0.34/12 ø mm2 0.34 AWG 22 L1 12.0 L2 8.0 D1 0.8 D2 2.0 S1 0.15 H0.5/14 H0.75/14 H1.0/14 H1.5/14 0.50 0.75 1.00 1.50 20 18 17 16 14.0 14.0 14.0 14.0 8.0 8.0 8.0 8.0 1.0 1.2 1.4 1.7 2.6 2.8 3.0 3.2 0.15 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 l turquoise 0.25 10.0 l orange 0.25 10.0 m white 0.25 11.0 l yellow 0.25 10.0 l red H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue J J.23 ø D2 ø D1 L2 L1 DIN colour code packed loose J DIN colour code in multipack bag DIN colour code Strip of wire end ferrules J.24 S2 S1 Tools and ferrules Wire end ferrules with plastic collar • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request For conductors from 0.5 to 50 mm2 (AWG 20-1) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/12D ø mm2 0.50 AWG 20 L1 12.0 L2 6.0 D1 1.0 D2 2.6 S1 0.15 VG* Qty. T 20A 001 A 500 Order No. 9019000000 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 S2 Stripping length Colour 0.25 8.0 m white 0.25 10.0 m white 0.25 12.0 m white 0.25 8.0 l grey 0.25 10.0 l grey 0.25 12.0 l grey 0.25 14.0 l grey 0.25 8.0 l red 0.25 10.0 l red 0.25 12.0 l red 0.25 15.0 l red 0.25 10.0 l black 0.25 12.0 l black 0.25 15.0 l black 0.25 20.0 l black 0.25 10.0 l blue 0.25 14.0 l blue 0.25 20.0 l blue 0.3 12.0 l grey 0.3 14.0 l grey 0.3 20.0 l grey 0.3 14.0 l yellow 0.3 20.0 l yellow 0.4 15.0 l red 0.4 21.0 l red 0.4 15.0 l blue 0.4 21.0 l blue 0.4 18.0 l yellow 0.4 24.0 l yellow 0.4 21.0 l red 0.4 19.0 l red 0.4 28.0 l red 0.5 26.0 l blue H0.5/14D H0.5/16D H0.75/12D H0.75/14D H0.75/16D H0.75/18D H1.0/12D H1.0/14D H1.0/16D H1.0/18D H1.5/14D H1.5/16D H1.5/18D H1.5/24D H2.5/14D H2.5/18D H2.5/24D H4.0/17D H4.0/20D H4.0/26D H6.0/20D H6.0/26D H10.0/22D H10.0/28D H16.0/24D H16.0/28D H25.0/30D H25.0/36D H35.0/30D H35.0/30D H35.0/39D H50.0/36D 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 4.00 6.00 6.00 10.00 10.00 16.00 16.00 25.00 25.00 35.00 35.00 35.00 50.00 20 20 18 18 18 18 17 17 17 17 16 16 16 16 14 14 14 12 12 12 10 10 7 7 6 6 3 3 2 2 2 1 14.0 16.0 12.0 14.0 16.0 18.0 12.0 14.0 16.0 18.0 14.0 16.0 18.0 24.0 14.0 18.0 24.0 17.0 20.0 26.0 20.0 26.0 22.0 28.0 24.0 28.0 30.0 36.0 30.0 30.0 39.0 36.0 8.0 10.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 8.0 10.0 12.0 18.0 8.0 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 18.0 16.0 22.0 18.0 16.0 25.0 20.0 1.0 1.0 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.7 1.7 1.7 1.7 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 5.8 5.8 7.3 7.3 8.3 8.3 8.3 10.3 2.6 2.6 2.8 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.5 3.5 3.5 3.5 4.2 4.2 4.2 4.8 4.8 4.8 6.3 6.3 7.6 7.6 8.8 8.8 11.2 11.2 12.7 12.7 12.7 15.0 T 20A 002 A T 20A 003 A T 20A 004 A T 20A 005 A T 20A 006 A T 20A 007 A T 20A 008 A T 20A 009 A T 20A 010 A T 20A 011 A T 20A 012 A T 20A 013 A T 20A 014 A T 20A 015 A T 20A 016 A T 20A 017 A T 20A 018 A T 20A 019 A T 20A 020 A T 20A 021 A T 20A 022 A T 20A 023 A T 20A 024 A T 20A 025 A T 20A 026 A T 20A 027 A T 20A 028 A T 20A 030 A T 20A 032 A T 20A 031 A T 20A 033 A T 20A 034 A 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 100 100 100 100 100 100 100 50 50 50 50 50 50 9019010000 9019020000 9019030000 9019040000 9019050000 9019060000 9019070000 9019080000 9019100000 9019110000 9019120000 9019130000 9019140000 9019150000 9019160000 9019170000 9019180000 9019190000 9019200000 9019210000 9019220000 9019230000 9019240000 9019250000 9019260000 9019270000 9019280000 9019300000 9019320000 9019310000 9019330000 9019340000 H50.0/40D 50.00 1 40.0 25.0 10.3 15.0 0.3 0.5 T 20A 035 A 50 9019350000 ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 VG* Qty. T 20A 002 A 500 Order No. 9019400000 8.0 8.0 8.0 18.0 8.0 1.2 1.4 1.7 1.7 2.2 2.8 3.0 3.5 3.5 4.2 0.15 0.15 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l grey 0.25 10.0 l red 0.25 10.0 l black 0.25 20.0 l black 0.25 10.0 l blue H0.75/14D H1.0/14D H1.5/14D H1.5/24D H2.5/14 0.75 1.00 1.50 1.50 2.50 18 17 16 16 14 14.0 14.0 14.0 24.0 14.0 T 20A 005 A T 20A 009 A T 20A 012 A T 20A 015 A 500 500 500 500 500 9019410000 9019420000 9019430000 9004140000 9026100000 H4.0/17 4.00 12 17.0 10.0 2.8 4.8 0.2 0.3 250 9026010000 ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 Qty. T 20A 002 A 500 Order No. 9004280000 0.75 1.00 1.50 18 17 16 14.0 14.0 14.0 8.0 8.0 8.0 1.2 1.4 1.7 2.8 3.0 3.2 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l grey 0.25 10.0 l red 0.25 10.0 l black H0.75/14D H1.0/14D H1.5/14D T 20A 005 A 500 T 20A 009 A 500 T 20A 012 A 500 9004300000 9004330000 9004350000 H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 T 20A 016 A 500 9004360000 31.0 l blue Ordering data Type H0.5/14D 12.0 l grey Ordering data Type H0.5/14D 11.0 l blue DIN colour code Reel of wire end ferrules S2 S1 L1 • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request Tools and ferrules L2 ø D2 ø D1 Wire end ferrules with plastic collar For conductors from 0.5 to 2.5 mm2 (AWG 20-14) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/14D ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 H0.75/14 H1.0/14D H1.5/14D 0.75 1.00 1.50 18 17 16 14.0 14.0 14.0 8.0 8.0 8.0 1.2 1.4 1.7 2.8 3.0 3.2 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l grey 0.25 11.0 l red 0.25 10.0 l black H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue VG* Qty. 5000 Order No. 9005860000 5000 5000 5000 9005870000 9005880000 9005890000 3000 9005850000 J J.25 ø D2 ø D1 L2 L1 other colour code packed loose J other colour code in multipack bag other colour code Strip of wire end ferrules J.26 S2 S1 Tools and ferrules Wire end ferrules with plastic collar • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request For conductors from 0.14 to 25 mm2 (AWG 26-3) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.25/10T ø mm2 0.25 AWG 24 L1 10.0 L2 6.0 D1 0.8 D2 1.8 S1 0.15 H0.25/12T H0.5/12D H0.5/14D H0.5/16D H0.75/12T H0.75/14 H0.75/16T H0.75/18T H1.0/12D H1.0/14D H1.0/16D H1.0/18D H1.5/14D H1.5/16D H1.5/18D H1.5/24D H2.5/14T H2.5/18T H2.5/24T H4.0/17T H4.0/20T H4.0/26T H6.0/20T H6.0/26T H10.0/22T H10.0/28T H16.0/24T H16.0/28T H25.0/30T 0.25 0.50 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 4.00 6.00 6.00 10.00 10.00 16.00 16.00 25.00 24 20 20 20 18 18 18 18 17 17 17 17 16 16 16 16 14 14 14 12 12 12 10 10 7 7 6 6 3 12.0 12.0 14.0 16.0 12.0 14.0 16.0 18.0 12.0 14.0 16.0 18.0 14.0 16.0 18.0 24.0 14.0 18.0 24.0 17.0 20.0 26.0 20.0 26.0 22.0 28.0 24.0 28.0 30.0 8.0 6.0 8.0 10.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 8.0 10.0 12.0 18.0 8.0 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 18.0 16.0 0.8 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.7 1.7 1.7 1.7 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 5.8 5.8 7.3 1.8 2.6 2.6 2.6 2.8 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.5 3.5 3.5 3.5 4.2 4.2 4.2 4.8 4.8 4.8 6.3 6.3 7.6 7.6 8.8 8.8 11.2 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 S2 Stripping length Colour 0.25 8.0 l yellow 0.25 10.0 l yellow 0.25 8.0 m white 0.25 10.0 m white 0.25 12.0 m white 0.25 8.0 l light blue 0.25 10.0 l light blue 0.25 12.0 l light blue 0.25 14.0 l light blue 0.25 8.0 l red 0.25 10.0 l red 0.25 12.0 l red 0.25 15.0 l red 0.25 10.0 l black 0.25 12.0 l black 0.25 15.0 l black 0.25 20.0 l black 0.25 10.0 l grey 0.25 14.0 l grey 0.25 20.0 l grey 0.3 12.0 l orange 0.3 14.0 l orange 0.3 20.0 l orange 0.3 14.0 l green 0.3 20.0 l green 0.4 15.0 l brown 0.4 21.0 l brown 0.4 15.0 m white 0.4 21.0 m white 0.4 18.0 l black H25.0/36T 25.00 3 36.0 22.0 7.3 11.2 0.2 0.4 24.0 l black Qty. 500 Order No. 9021010000 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 100 100 100 100 100 100 100 50 9021020000 9019000000 9019010000 9019020000 9021030000 9021040000 9021050000 9021060000 9019070000 9019080000 9019100000 9019110000 9019120000 9019130000 9019140000 9019150000 9021070000 9021080000 9021090000 9021100000 9021110000 9021120000 9021130000 9021140000 9021150000 9021160000 9021170000 9021180000 9021190000 50 9021200000 Qty. 500 Order No. 9028250000 500 500 500 500 500 500 500 500 9021210000 9021220000 9019400000 9021230000 9019420000 9019430000 9004140000 9021240000 250 9021250000 Ordering data Type H0.14/10T ø mm2 0.14 AWG 26 L1 10.0 L2 6.0 D1 0.6 D2 1.5 S1 0.15 H0.25/10T H0.25/12T H0.5/14D H0.75/14T H1.0/14D H1.5/14D H1.5/24D H2.5/14T 0.25 0.25 0.50 0.75 1.00 1.50 1.50 2.50 24 24 20 18 17 16 16 14 10.0 12.0 14.0 14.0 14.0 14.0 24.0 14.0 6.0 8.0 8.0 8.0 8.0 8.0 18.0 8.0 0.8 0.8 1.0 1.2 1.4 1.7 1.7 2.2 1.8 1.8 2.6 2.8 3.0 3.5 3.5 4.2 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length Colour 0.25 8.0 l brown 0.25 8.0 l yellow 0.25 10.0 l yellow 0.25 10.0 m white 0.25 10.0 l light blue 0.25 10.0 l red 0.25 10.0 l black 0.25 20.0 l black 0.25 10.0 l grey H4.0/17T 4.00 12 17.0 10.0 2.8 4.8 0.2 0.3 ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 Qty. 500 Order No. 9004280000 H0.75/14T H1.0/14D H1.5/14D 0.75 1.00 1.50 18 17 16 14.0 14.0 14.0 8.0 8.0 8.0 1.2 1.4 1.7 2.8 3.0 3.2 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l light blue 0.25 10.0 l red 0.25 10.0 l black 500 500 500 9004310000 9004330000 9004350000 H2.5/14T 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 500 9004370000 12.0 l orange Ordering data Type H0.5/14D 11.0 l grey other colour code Reel of wire end ferrules S2 S1 L1 • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request Tools and ferrules L2 ø D2 ø D1 Wire end ferrules with plastic collar For conductors from 0.5 to 2.5 mm2 (AWG 20-14) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/14D ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.6 S1 0.15 Qty. 5000 Order No. 9005860000 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l light blue 0.25 11.0 l red 0.25 10.0 l black H0.75/14T H1.0/14D H1.5/14D 0.75 1.00 1.50 18 17 16 14.0 14.0 14.0 8.0 8.0 8.0 1.2 1.4 1.7 2.8 3.0 3.2 5000 5000 5000 9005900000 9005880000 9005890000 H2.5/14T 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 3000 9005910000 11.0 l grey J J.27 Twin-wire end ferrules with plastic collar Tools and ferrules • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request L1 B L2 A D1 S1 S2 Weidmüller colour code packed loose Weidmüller colour code in multipack bag For conductors from 2 x 0,5-2 x 16 mm2 (2 x AWG 20-2 x AWG 6) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/15 ø mm2 0.50 AWG 20 L1 15.0 L2 8.0 D1 1.4 H0.5/16.5 H0.5/18.5 H0.75/15 H0.75/17 H0.75/19S H0.75/24.5 H1.0/15 H1.0/15S H1.0/20 H1.0/25.6 H1.5/16 H1.5/20 H1.5/25.6 H2.5/18.5D H2.5/20.5D H2.5/26.5D H4.0/22D H4.0/28D H6.0/25 H6.0/29 H10.0/24S H10.0/26 H10.0/30 H10.0/30S H16.0/29 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 6.00 6.00 10.00 10.00 10.00 10.00 16.00 20 20 18 18 18 18 17 17 17 17 16 16 16 14 14 14 12 12 10 10 7 7 7 7 6 16.0 19.0 15.0 17.0 19.0 24.0 15.0 16.0 19.0 25.0 16.0 20.0 26.0 19.0 21.0 27.0 22.0 28.0 25.0 29.0 24.0 24.0 30.0 30.0 29.0 10.0 12.0 8.0 10.0 12.0 18.0 8.0 8.0 12.0 18.0 8.2 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 12.0 18.0 18.0 16.0 1.4 1.4 1.7 1.7 1.4 1.7 2.0 2.2 2.0 2.0 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 6.5 5.8 5.8 6.5 8.3 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 S2 Stripping length Colour 0.3 11.0 l orange 0.3 13.0 l orange 0.3 15.0 l orange 0.3 11.0 m white 0.3 13.0 m white 0.3 21.0 m white 0.3 21.0 m white 0.3 12.0 l yellow 0.3 12.0 l yellow 0.3 16.0 l yellow 0.3 22.0 l yellow 0.3 11.0 l red 0.3 15.0 l red 0.3 21.0 l red 0.4 13.0 l blue 0.4 15.0 l blue 0.4 21.0 l blue 0.5 15.0 l grey 0.5 21.0 l grey 0.5 20.0 l black 0.5 24.0 l black 0.5 17.0 l ivory 0.5 17.0 l ivory 0.5 23.0 l ivory 0.5 23.0 l ivory 0.6 20.0 l green H16.0/38 16.00 6 38.0 25.0 8.3 0.3 0.6 ø mm2 0.50 AWG 20 L1 15.0 L2 8.0 D1 1.4 S1 0.15 0.75 0.75 1.00 1.00 1.00 1.50 1.50 2.50 2.50 4.00 6.00 18 18 17 17 17 16 16 14 14 12 10 15.0 17.0 15.0 16.0 19.0 16.0 20.0 19.0 21.0 22.0 25.0 8.0 10.0 8.0 8.0 12.0 8.2 12.0 10.0 12.0 12.0 12.0 1.7 1.7 2.0 2.2 2.0 2.2 2.2 2.8 2.8 3.5 4.5 10.00 7 24.0 12.0 5.8 Type H0.5/15 H10.0/26 J.28 S1 0.15 Qty. 500 Order No. 9037200000 500 500 500 500 500 500 500 500 500 500 500 500 100 500 100 100 100 100 100 100 100 100 100 100 50 9037210000 9037220000 9037230000 9037240000 9202820000 9037250000 9037260000 9018690000 9037270000 9037280000 9037290000 9037300000 9037310000 9037500000 9037510000 9037520000 9037530000 9037540000 9037320000 9037330000 9018860000 9037340000 9037350000 9018870000 9037360000 50 9037370000 Qty. 500 Order No. 9004440000 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 S2 Stripping length Colour 0.3 11.0 l orange 0.3 11.0 m white 0.3 13.0 m white 0.3 12.0 l yellow 0.3 12.0 l yellow 0.3 16.0 l yellow 0.3 11.0 l red 0.3 15.0 l red 0.4 13.0 l blue 0.4 15.0 l blue 0.5 15.0 l grey 0.5 20.0 l black 500 500 500 500 500 500 500 250 250 100 100 9018510000 9004900000 9018530000 9018650000 9004910000 9004410000 9004920000 9004430000 9004740000 9004730000 9004930000 0.2 0.5 100 9004940000 29.0 l green Ordering data H0.75/15 H0.75/17 H1.0/15 H1.0/15S H1.0/20 H1.5/16 H1.5/20 H2.5/18.5D H2.5/20.5D H4.0/22D H6.0/25 J D2 D2 17.0 l ivory Twin-wire end ferrules with plastic collar L2 A D1 S1 S2 DIN colour code packed loose DIN colour code in multipack bag Tools and ferrules • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request L1 B For conductors from 2 x 0,5-2 x 16 mm2 (2 x AWG 20-2 x AWG 6) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/15D ø mm2 0.50 AWG 20 L1 15.0 L2 8.0 D1 1.4 D2 S1 0.15 H0.5/16.5D H0.5/18.4D H0.75/15D H0.75/17D H0.75/19DS H0.75/24.5D H1.0/15D H1.0/20D H1.0/25.6D H1.5/16D H1.5/20D H1.5/25.6D H2.5/18.5D H2.5/20.5D H2.5/26.5D H4.0/22D H4.0/28D H6.0/25D H6.0/29D H10.0/24DS H10.0/26D H10.0/30D H10.0/30DS H16.0/29D 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 6.00 6.00 10.00 10.00 10.00 10.00 16.00 20 20 18 18 18 18 17 17 17 16 16 16 14 14 14 12 12 10 10 7 7 7 7 6 16.0 19.0 15.0 17.0 19.0 24.0 16.0 19.0 25.0 16.0 20.0 26.0 19.0 21.0 27.0 22.0 28.0 25.0 29.0 24.0 24.0 30.0 30.0 29.0 10.0 12.0 8.0 10.0 12.0 18.0 8.0 12.0 18.0 8.0 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 12.0 18.0 18.0 16.0 1.4 1.4 1.7 1.7 1.4 1.7 2.2 2.0 2.0 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 6.5 5.8 5.8 6.5 8.3 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 S2 Stripping length Colour 0.3 11.0 m white 0.3 13.0 m white 0.3 15.0 m white 0.3 11.0 l grey 0.3 13.0 l grey 0.3 21.0 l grey 0.3 21.0 l grey 0.3 12.0 l red 0.3 16.0 l red 0.3 22.0 l red 0.3 11.0 l black 0.3 15.0 l black 0.3 21.0 l black 0.4 13.0 l blue 0.4 15.0 l blue 0.4 21.0 l blue 0.5 15.0 l grey 0.5 21.0 l grey 0.5 20.0 l yellow 0.5 24.0 l yellow 0.5 17.0 l red 0.5 17.0 l red 0.5 23.0 l red 0.5 23.0 l red 0.6 20.0 l blue Qty. 500 Order No. 9037380000 500 500 500 500 500 500 500 500 500 500 500 100 500 100 100 100 100 100 100 100 100 100 100 50 9037390000 9037400000 9037410000 9037420000 9202830000 9037430000 9037440000 9037450000 9037460000 9037470000 9037480000 9037490000 9037500000 9037510000 9037520000 9037530000 9037540000 9037550000 9037560000 9018880000 9037570000 9037580000 9018890000 9037590000 H16.0/38D 16.00 6 38.0 25.0 8.3 0.3 0.6 50 9037600000 ø mm2 0.50 AWG 20 L1 15.0 L2 8.0 D1 1.4 S1 0.15 Qty. 500 Order No. 9004780000 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 S2 Stripping length Colour 0.3 11.0 m white 0.3 11.0 l grey 0.3 13.0 l grey 0.3 12.0 l red 0.3 16.0 l red 0.3 11.0 l black 0.3 15.0 l black 0.4 13.0 l blue 0.4 15.0 l blue 0.5 15.0 l grey 0.5 20.0 l yellow H0.75/15D H0.75/17D H1.0/15D H1.0/20D H1.5/16D H1.5/20D H2.5/18.5D H2.5/20.5D H4.0/22D H6.0/25D 0.75 0.75 1.00 1.00 1.50 1.50 2.50 2.50 4.00 6.00 18 18 17 17 16 16 14 14 12 10 15.0 17.0 16.0 19.0 16.0 20.0 19.0 21.0 22.0 25.0 8.0 10.0 8.0 12.0 8.0 12.0 10.0 12.0 12.0 12.0 1.7 1.7 2.2 2.0 2.2 2.2 2.8 2.8 3.5 4.5 500 500 500 500 500 500 250 250 100 100 9018520000 9004770000 9018540000 9004760000 9004420000 9004750000 9004430000 9004740000 9004730000 9004720000 H10.0/26D 10.00 7 24.0 12.0 5.8 0.2 0.5 100 9004710000 29.0 l blue Ordering data Type H0.5/15D D2 17.0 l red J.29 J Twin-wire end ferrules with plastic collar Tools and ferrules • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request L1 B L2 A D1 S1 S2 other colour code packed loose other colour code in multipack bag J J.30 For conductors from 2 x 0,5-2 x 16 mm2 (2 x AWG 20-2 x AWG 6) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/15 ø mm2 0.50 AWG 20 L1 15.0 L2 8.0 D1 1.4 D2 S1 0.15 H0.5/16.5 H0.5/18.5 H0.75/15T H0.75/17T H0.75/19TS H0.75/24.5T H1.0/15D H1.0/20D H1.0/25.6D H1.5/16D H1.5/20D H1.5/25.6D H2.5/18.5T H2.5/20.5T H2.5/26.5T H4.0/22T H4.0/28T H6.0/25T H6.0/29T H10.0/26T H10.0/30T H16.0/19T 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.50 1.50 1.50 2.50 2.50 2.50 4.00 4.00 6.00 6.00 10.00 10.00 16.00 20 20 18 18 18 18 17 17 17 16 16 16 14 14 14 12 12 10 10 7 7 6 16.0 19.0 15.0 17.0 19.0 24.0 16.0 19.0 25.0 16.0 20.0 26.0 19.0 21.0 27.0 22.0 28.0 25.0 29.0 24.0 30.0 29.0 10.0 12.0 8.0 10.0 12.0 18.0 8.0 12.0 18.0 8.0 12.0 18.0 10.0 12.0 18.0 12.0 18.0 12.0 18.0 12.0 18.0 16.0 1.4 1.4 1.7 1.7 1.4 1.7 2.2 2.0 2.0 2.2 2.2 2.2 2.8 2.8 2.8 3.5 3.5 4.5 4.5 5.8 5.8 8.3 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.3 S2 Stripping length Colour 0.3 11.0 l orange 0.3 13.0 l orange 0.3 15.0 l orange 0.3 11.0 l light blue 0.3 13.0 l light blue 0.3 21.0 l light blue 0.3 21.0 l light blue 0.3 12.0 l red 0.3 16.0 l red 0.3 22.0 l red 0.3 11.0 l black 0.3 15.0 l black 0.3 21.0 l black 0.4 13.0 l grey 0.4 15.0 l grey 0.4 21.0 l grey 0.5 15.0 l orange 0.5 21.0 l orange 0.5 20.0 l green 0.5 24.0 l green 0.5 17.0 l brown 0.5 23.0 l brown 0.6 20.0 m white H16.0/38T 16.00 6 38.0 25.0 8.3 0.3 0.6 S1 0.15 29.0 m white Qty. 500 Order No. 9037200000 500 500 500 500 500 500 500 500 500 500 500 100 500 100 100 100 100 100 100 100 100 50 9037210000 9037220000 9037610000 9037620000 9202840000 9037630000 9037440000 9037450000 9037460000 9037470000 9037480000 9037490000 9037640000 9037650000 9037660000 9037670000 9037680000 9037690000 9037700000 9037710000 9037720000 9037730000 50 9037740000 Qty. 500 Order No. 9005140000 500 500 500 500 250 250 100 100 9018540000 9004760000 9004420000 9004750000 9018580000 9005150000 9018590000 9005160000 100 9005170000 Ordering data Type H0.75/17T ø mm2 0.75 AWG 18 L1 17.0 L2 10.0 D1 1.7 D2 H1.0/15D H1.0/20D H1.5/16D H1.5/20D H2.5/18.5T H2.5/20.5 H4.0/22T H6.0/25T 1.00 1.00 1.50 1.50 2.50 2.50 4.00 6.00 17 17 16 16 14 14 12 10 16.0 19.0 16.0 20.0 19.0 21.0 22.0 25.0 8.0 12.0 8.0 12.0 10.0 12.0 12.0 12.0 2.2 2.0 2.2 2.2 2.8 2.8 3.5 4.5 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 S2 Stripping length Colour 0.3 13.0 l light blue 0.3 12.0 l red 0.3 16.0 l red 0.3 11.0 l black 0.3 15.0 l black 0.4 13.0 l grey 0.4 15.0 l grey 0.5 15.0 l orange 0.5 20.0 l green H10.0/26T 10.00 7 24.0 12.0 5.8 0.2 0.5 17.0 l brown Weidmüller colour code packed loose Weidmüller colour code in multipack bag S2 S1 L1 • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request Tools and ferrules L2 ø D2 ø D1 Wire end ferrules for short-circuit and earth-fault-proof cables For conductors from 1.5 to 16 mm2 (AWG 16-6) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H1.5/24 XS ø mm2 1.50 AWG 16 L1 24.0 L2 18.0 D1 1.8 D2 6.8 S1 0.15 S2 Stripping length Colour 0.3 20.0 l black Qty. 100 Order No. 9202870000 H2.5/24 XS 2.50 14 24.0 18.0 2.3 7.6 0.15 0.3 100 9202880000 Qty. 100 Order No. 9006590000 100 100 100 100 100 100 9006630000 9006670000 9006710000 9006750000 9006790000 9006830000 100 9006870000 20.0 l blue Ordering data Type H1.5/17.5X ø mm2 1.50 AWG 16 L1 17.5 L2 8.0 D1 1.8 D2 6.8 S1 0.15 H1.5/19.5X H2.5/17.5X H2.5/21.5X H4.0/19.5X H6.0/23.0X H10.0/24.5X 1.50 2.50 2.50 4.00 6.00 10.00 16 14 14 12 10 7 19.5 17.5 21.5 19.5 23.0 24.0 10.0 8.0 12.0 10.0 12.0 12.0 1.8 2.3 2.3 2.9 3.6 4.6 6.8 7.6 7.6 7.8 8.1 9.6 0.15 0.15 0.15 0.2 0.2 0.2 S2 Stripping length Colour 0.3 13.0 l black 0.3 15.0 l black 0.3 14.0 l blue 0.3 17.0 l blue 0.3 14.0 l grey 0.3 17.0 l yellow 0.3 17.0 l red H16.0/25.5X 16.00 6 25.5 12.0 6.0 11.9 0.2 0.3 26.0 l blue J J.31 ø D2 ø D1 L2 L1 Weidmüller colour code packed loose Weidmüller colour code in multipack bag J J.32 S2 S1 Tools and ferrules Wire end ferrules with plastic collar, special sizes • Polypropylene conical cable entry • Heat-resistant up to 105 °C • Cable entry made from a not readily flammable material on request For conductors from 0.5 to 2.5 mm2 (AWG 20-14) Tin-plated copper Dimensional tolerances to DIN 46228 part 4 Ordering data Type H0.5/14S ø mm2 0.50 AWG 20 L1 14.0 L2 8.0 D1 1.0 D2 2.9 S1 0.15 Qty. 500 Order No. 9004560000 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length Colour 0.25 10.0 l orange 0.25 10.0 m white 0.25 12.0 m white 0.25 12.0 l orange 0.25 10.0 m white 0.25 10.0 l light blue 0.25 10.0 l yellow 0.25 10.0 l red 0.25 8.0 l red 0.25 10.0 l red 0.25 10.0 l black 0.25 8.0 l blue 0.25 8.0 l grey 0.25 10.0 l blue 0.25 10.0 l grey H0.5/14S H0.5/16DS H0.5/16S H0.75/14S H0.75/14TS H1.0/14S H1.0/14S H1.5/12S H1.5/14S H1.5/14S H2.5/12DS H2.5/12TS H2.5/14S H2.5/14TS 0.50 0.50 0.50 0.75 0.75 1.00 1.00 1.50 1.50 1.50 2.50 2.50 2.50 2.50 20 20 20 18 18 17 17 16 16 16 14 14 14 14 14.0 16.0 16.0 14.0 14.0 14.0 14.0 12.0 14.0 14.0 12.0 12.0 14.0 14.0 8.0 10.0 10.0 8.0 8.0 8.0 8.0 6.0 8.0 8.0 6.0 6.0 8.0 8.0 1.0 1.0 1.0 1.2 1.2 1.4 1.4 1.7 1.7 1.7 2.2 2.2 2.2 2.2 2.9 2.9 2.9 3.4 3.4 3.5 3.5 3.5 3.9 3.9 4.2 4.2 4.0 4.0 500 500 500 500 500 500 500 500 500 500 500 500 500 500 9004590000 9202910000 9202900000 9025960000 9018550000 9025970000 9018560000 9025690000 9025980000 9025240000 9028490000 9036200000 1333100000 9426770000 H2.5/16DS 2.50 14 16.0 10.0 2.2 4.2 0.15 0.25 500 9036220000 Qty. 500 Order No. 9025700000 500 500 9025710000 9028360000 500 9025720000 13.0 l blue Ordering data Type H0.75/14S ø mm2 0.75 AWG 18 L1 14.0 L2 8.0 D1 1.2 D2 3.4 S1 0.15 H1.0/14S H1.5/14DS 1.00 1.50 17 16 14.0 14.0 8.0 8.0 1.4 1.7 3.5 3.9 0.15 0.15 S2 Stripping length Colour 0.25 10.0 m white 0.25 10.0 l yellow 0.25 10.0 l black H1.5/14S 1.50 16 14.0 8.0 1.7 3.9 0.15 0.25 10.0 l red Wire end ferrules without plastic collar without plastic collar packed loose Tools and ferrules For conductors 0.25-185 mm2 (AWG 24-350MCM) Material: tin-plated copper Dimensional tolerances to DIN 46228 part 1 Ordering data Type H0.25/5 ø mm2 0.25 AWG 24 H0.5/10 H0.5/6 H0.75/10 H0.75/6 H1.0/10 H1.0/6 H1.5/7 H1.5/10 H1.5/12 H1.5/18 H2.5/7 H2.5/10 H2.5/12 H2.5/18 H4.0/9 H4.0/15 H4.0/12 H4.0/18 H6.0/10 H6.0/12 H6.0/15 H6.0/18 H10.0/12 H10.0/15 H10.0/18 H16.0/12 H16.0/15 H16.0/18 H16.0/25 H16.0/32 H25.0/15 H25.0/18 H25.0/25 H25.0/32 H35.0/18 H35.0/25 H35.0/30 H35.0/32 H50.0/18 H50.0/25 H50.0/32 H70.0/25 H70.0/32 H95.0/25 H95.0/32 H120.0/32 H150.0/32 0.50 20 0.50 20 0.75 18 0.75 18 1.00 17 1.00 17 1.50 16 1.50 16 1.50 16 1.50 16 2.50 14 2.50 14 2.50 14 2.50 14 4.00 12 4.00 12 4.00 12 4.00 12 6.00 10 6.00 10 6.00 10 6.00 10 10.00 7 10.00 7 10.00 7 16.00 6 16.00 6 16.00 6 16.00 6 16.00 6 25.00 3 25.00 3 25.00 3 25.00 3 35.00 2 35.00 2 35.00 2 35.00 2 50.00 1 50.00 1 50.00 1 70.00 2/0 70.00 2/0 95.00 3/0 95.00 3/0 120.00 4/0 150.00 300 MCM H185.0/32 L1 5.0 L2 D1 0.7 D2 1.6 10.0 6.0 10.0 6.0 10.0 6.0 7.0 10.0 12.0 18.0 7.0 10.0 12.0 18.0 9.0 15.0 12.0 18.0 10.0 12.0 15.0 18.0 12.0 15.0 18.0 12.0 15.0 18.0 25.0 32.0 15.0 18.0 25.0 32.0 18.0 25.0 30.0 32.0 18.0 25.0 32.0 25.0 32.0 25.0 32.0 32.0 32.0 1.0 1.0 1.2 1.2 1.4 1.4 1.7 1.7 1.7 1.7 2.2 2.2 2.2 2.2 2.8 2.8 2.8 2.8 3.5 3.5 3.5 3.5 4.5 4.5 4.5 5.8 5.8 5.8 5.8 5.8 7.3 7.3 7.3 7.3 8.3 8.3 8.3 8.3 10.3 10.3 10.3 12.5 12.5 14.5 14.5 16.5 18.5 2.1 2.1 2.3 2.3 2.5 2.5 2.8 2.8 2.8 2.8 3.4 3.4 3.4 3.4 4.0 4.0 4.0 4.0 4.7 4.7 4.7 4.7 5.8 5.8 5.8 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 9.5 11.0 11.0 11.0 11.0 13.0 13.0 13.0 15.0 15.0 17.0 17.0 19.0 21.0 185.00 350 MCM 32.0 20.0 23.5 S1 S2 Stripping length Colour 5.0 Qty. 1000 Order No. 9018910000 10.0 6.0 10.0 6.0 10.0 6.0 7.0 10.0 12.0 18.0 7.0 10.0 12.0 18.0 9.0 15.0 12.0 18.0 10.0 12.0 15.0 18.0 12.0 15.0 18.0 12.0 15.0 18.0 25.0 32.0 15.0 18.0 25.0 32.0 18.0 25.0 30.0 32.0 18.0 25.0 32.0 25.0 32.0 25.0 32.0 32.0 32.0 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 1000 500 500 500 500 500 500 500 500 500 500 100 100 100 250 100 250 100 100 100 100 100 100 100 100 50 50 50 50 25 25 9004050000 0282600000 0542500000 0282700000 0282800000 0372600000 0372700000 0186500000 9004060000 9004070000 0373000000 9004080000 0186100000 9004090000 0373100000 9004100000 0244100000 9004110000 9004120000 0191900000 0124700000 9004130000 0282900000 0124800000 0379300000 0492500000 0124300000 0375200000 9004150000 9004160000 0124400000 0375300000 9004170000 9004180000 0368900000 9004190000 9451000000 9004200000 9004210000 9025880000 9004220000 9004230000 9004240000 9004250000 9004260000 9036240000 9036250000 32.0 25 9036260000 J.33 J J J.34 Tools and ferrules Tools and ferrules Tools for insulated cable lugs and ferrules Tools Tools for insulated cable lugs Tool CTI 6 Order No. 9006120000 0.5 - 1.5 l Type of contact 1.5 - 2.5 l 4.0 - 6.0 l CTI 6 S 9006210000 l l l HTI 15 Station 9014400000 l red l blue yellow Crimping tools for ferrules PZ 1.5 Order No. 9005990000 stripax® plus 2.5 PZ 3 PZ 4 PZ 6 roto PZ 6 HEX PZ 6/5 PZ 16 PZ 50 9020000000 0567300000 9012500000 9014350000 9013650000 9011460000 9012600000 9006450000 l l l l l l l l l l l l l l l l l l l l l l l l l l l Ferrule mm2 H 0.25 H 0.34 H 0.5 l l l H 0.75 H 1.0 H 1.5 H 2.5 H 4.0 H 6.0 H 10.0 H 16.0 H 25.0 H 35.0 H 50.0 l l l l1 l l l1 l1 l1 l1 l l l l l l l l l l l l l l l l l l1 = ferrules in strip form only J Twin wire end ferrules are to be crimped according to the following table: Tool H 0.5 l H 0.75 l H 1.0 H 1.5 Ferrules H 2.5 H 4.0 PZ 1.5 Order No. 9005990000 PZ 3 PZ 4 PZ 6 roto 0567300000 9012500000 9014350000 l l l l l l l l l l l l l l l l PZ 6/5 Station 9011460000 1.5 mm2 l 1.5 mm2 l 2.5 mm2 l 2.5 mm2 l 4 mm2 l 6 mm2 PZ ZH 16 9013600000 H 6.0 H 10.0 H 16.0 l l l J.35 J J.36 Tools and ferrules