Screwdrivers Introduction – SlimLine screwdriver SlimLine screwdriver VDE insulated screwdriver with thin blade The SlimLine screwdriver design allows you to reach deeply inset fittings and tension clamp terminals which cannot normally be reached using a standard VDE screwdriver. The SlimLine screwdrivers can be used for Weidmüller’s Z-series of terminal blocks. The tools have an ergonomically designed grip so that they can be used without causing pain or stress. The SoftFinish® zone delivers excellent feel, ensures electrical safety and is easy on your hands. A blade that is up to 33 % thinner F The moulded protective insulation, applied directly to the shaft ensures safety and protection during critical applications at levels of up to 1,500 V (DC) or 1,000 V (AC). F.16 Ergonomic design Security The ergonomic grip design makes for a comfortable screwing process and excellent handling. The SoftFinish® zone prevents the tool from slipping away and thus makes higher torques possible. The moulded protective insulation, applied directly to the shaft ensures safety and protection during critical applications at levels of up to 1,500 V (DC) or 1,000 V (AC). 1327490000 – 2013 SlimLine screwdriver SlimLine VDE-insulated screwdriver Screwdrivers VDE-insulated screwdriver, for working on live parts up to 1,000 V AC and 1,500 V DC. DIN EN 60900, IEC 900, Safety tested „GS“, each piece tested. The bit is made from fully-hardened, high-allow, chromium-vanadium-molybdenum steel with a gun-metal finish. A blade that is up to 33 % thinner The SlimLine design allows you to reach deeply inset fittings and tension clamp terminals. Type Blade type Size / AF a b c Order No. 0,6 0,8 1,0 1,2 3,5 4,0 4,5 6,5 100 100 125 150 1274660000 1274670000 1274680000 1274690000 SDI SL S VDE insulated slot-head screwdriver, SDI SL DIN 7437, ISO 2380/2, drive output acc. to DIN 5264, ISO 2380/1. SoftFinish® grip SDIS SL 0,6x3,5x100 SDIS SL 0,8x4,0x100 SDIS SL 1,0x4,5x125 SDIS SL 1,2x6,5x150 B B B B F SDIK SL PH VDE-insulated crosshead screwdriver, Phillips type, SDIK SL PH DIN 7438, ISO 8764/2-PH, output acc. to ISO 8764-PH, SoftFinish® grip SDIK SL PH1 SDIK SL PH2 1 2 80 100 1274710000 1274720000 SDIK SL PZ1 SDIK SL PZ2 1 2 80 100 1274730000 1274740000 SDIK SL PZ VDE-insulated crosshead screwdriver Pozidrive type, SDIK SL PZ DIN 7438, ISO 8764/2-PZ, output acc. to ISO 8764-PZ, SoftFinish® grip SDIS SL 2.5-5.5/PH/1/2 6-part set: VDE insulated slotted and crosshead PH screwdriver set 1327490000 – 2013 SDIS SL 0,6x3,5x100 SDIS SL 0,8x4,0x100 SDIS SL 1,0x5,5x125 SDIS SL 1,2x6,5x150 SDIK SL PH1 SDIK SL PH2 SDIS SL 2,5-5,5/PH1/2 B B B B 0,6 0,8 1,0 1,2 1 2 3,5 4,0 4,5 6,5 100 100 125 150 80 100 1274750000 F.17 Screwdrivers Introduction – Screwdrivers Screwdrivers Weidmüller screwdrivers come in four different grip sizes, and are the result of a consistent grip concept which takes into account both the human hand and the different work requirements and conditions. • Perfect handling with all grip sizes • Maximum torques • Optimum transmission of axial force • Complete range including all commercial sizes F F.18 SoftFinish® grip SoftFinish® electric Weidmüller’s SoftFinish® grip zone for use in dry conditions and for general applications offers customers a complete range of screwdrivers that enables far higher torques as well as substantially more comfort due to the soft material of the grip. VDE-insulated screwdriver according to DIN EN 60900, IEC 900 for work on live equipment Product benefits: •Made of an especially soft material, which is kind to the skin, the SoftFinish® zone enables maximum torques •Perfect ergonomic grip design for comfortable screw driving and optimum handling •You can choose from long-life extremely stressable blades in standard sizes •ChromTop blade tip offers maximum corrosion protection and greatest possible dimensional accuracy of the blade geometry in the screw head over many years Product benefits: •The protective insulation moulded directly on the screwdriver blade ensures electrical safety, even in critical applications •Safe for working at up to 1,500 volts DC and 1,000 volts AC •Each screwdriver is individually tested in a water bath at 10,000 volts according to DIN EN 60900 •Perfect ergonomic grip design for comfortable screw driving and optimum handling •Made of special soft material which is kind to the skin, the SoftFinish® zone prevents slipping in critical situations and at the same time enables maximum torques 1327490000 – 2013 VDE-insulated screwdriver VDE-insulated screwdriver Type Blade type Size / AF a b c Order No. 0.4 0.4 0.5 0.6 0.8 1 1 1 1 1.2 1.6 2 2.5 3 3.5 4 4.5 4.5 5.5 5.5 6.5 8 60 75 100 100 100 125 175 125 175 150 175 9205690000 9008370000 9008380000 9008390000 9008400000 9008910000 9205700000 9008410000 9205710000 9008420000 9008430000 60 80 100 150 9008560000 9008570000 9008580000 9008590000 SDI S VDE insulated slot-head screwdriver, SDI DIN 7437, ISO 2380/2, drive output acc. to DIN 5264, ISO 2380/1. SoftFinish® grip SDIS 0.4X2.0X60 SDIS 0.4X2.5X75 SDIS 0.5X3.0X100 SDIS 0.6X3.5X100 SDIS 0.8X4.0X100 SDIS 1.0X4.5X125 SDIS 1.0X4.5X175 SDIS 1.0X5.5X125 SDIS 1.0X5.5X175 SDIS 1.2X6.5X150 SDIS 1.6X8.0X175 A A B B B B B B B B B SDIK PH VDE-insulated crosshead screwdriver Pozidrive type, SDIK PZ DIN 7438, ISO 8764/2-PZ, output acc. to ISO 8764-PZ, SoftFinish® grip SDIK PH0 SDIK PH1 SDIK PH2 SDIK PH3 0 1 2 3 Screwdrivers VDE-insulated screwdriver, for working on live parts up to 1.000 V AC and 1.500 V DC. DIN EN 60900, IEC 900, Each piece „GS Safety“ tested. Bit made from fully hardened, high-alloy chromiumvanadium-molybdenum steel, gun-metal finish. F SDIK PZ VDE-insulated crosshead screwdriver Pozidrive type, SDIK PZ DIN 7438, ISO 8764/2-PZ, output acc. to ISO 8764-PZ, SoftFinish® grip SDIK PZ1 SDIK PZ2 1 2 80 100 SDI SL / PH VDE-insulated plus-minus screwdriver, Phillips, SDI SL/PH SoftFinish® handle SDI SL/PH 1 SDI SL/PH 2 1318330000 1318340000 size PH1 size PH2 SDIZ VDE insulated slot-head screwdriver, SDI DIN 7437, ISO 2380/2, drive output acc. to DIN 5264, ISO 2380/1. SoftFinish® grip 1327490000 – 2013 SDIZ 0.6X3.5X100 SDIZ 0.8X4.0X100 SDIZ 0,8X5,5 150/248 9008900000 9008890000 0.6 3.5 0.8 4 0.8 5.5 100 100 150 9008450000 9008460000 9008640000 F.19 VDE-insulated screwdriver VDE-insulated screwdriver Screwdrivers VDE-insulated screwdrivers, for working on live parts up to 1.000 V AC and 1.500 V DC, DIN EN 60900, IEC 900. Each piece „GS Safety“ tested. Blade made from throughhardened, high-alloy chromium-vanadium-molybdenum steel, gun-metal black-oxide finish. Type SDIS 2.5-5.5/PZ/1/2 SDIS 2.0-5.5 6-part set: VDE-insulated slotted screwdriver set F.20 Size / AF a b c Order No. SDIS 2.5-5.5/PH/1/2 6-part set: VDE insulated slotted and crosshead PH screwdriver set F Blade type SDIS 0.4X2.5X75 SDIS 0.5X3.0X100 SDIS 0.8X4.0X100 SDIS 1.0X5.5X125 SDIK PH1 SDIK PH2 SDI Set S2.5-5.5/PH1/2 A B B B SDIS 0.4X2.5X75 SDIS 0.5X3.0X100 SDIS 0.8X4.0X100 SDIS 1.0X5.5X125 SDIK PZ1 SDIK PZ2 SDI Set S2.5-5.5/PZ1/2 A B B B SDIS 0.4X2.0X60 SDIS 0.4X2.5X75 SDIS 0.5X3.0X100 SDIS 0.6X3.5X100 SDIS 0.8X4.0X100 SDIS 1.0X5.5X125 SDI Set S2.0-5.5 A A B B B B 0.4 2.5 0.5 3 0.8 4 1 5.5 1 2 75 100 100 125 80 100 9009730000 0.4 2.5 0.5 3 0.8 4 1 5.5 1 2 0.4 2 0.4 2.5 0.5 3 0.6 3.5 0.8 4 1 5.5 75 100 100 125 80 100 1 1128540000 60 75 100 100 100 125 1 9205550000 1327490000 – 2013 Uninsulated screwdriver Uninsulated screwdriver Type Blade type Size / AF a b c Order No. 0.4 0.4 0.5 0.6 0.6 0.8 0.8 1 1.2 2 2.5 3 3.5 3.5 4 4.5 5.5 6.5 60 75 80 100 200 100 125 150 150 9037160000 9009030000 9008320000 9008330000 9010110000 9008340000 9009020000 9008350000 9009010000 60 80 100 150 9008470000 9008480000 9008490000 9008500000 SD S Slotted screwdriver with rounded blade SD DIN 5265, ISO 2380/2, output to DIN 5264, ISO 2380/1. ChromTop tip, SoftFinish® grip SDS 0.4X2.0X60 SDS 0.4X2.5X75 SDS 0.5X3.0X80 SDS 0.6X3.5X100 SDS 0.6X3.5X200 SDS 0.8X4.0X100 SDS 0.8X4.0X125 SDS 1.0X5.5X150 SDS 1.2X6.5X150 B A A A A A A A A SDK PH Crosshead screwdriver, Phillips, SDK PH DIN 5262, ISO 8764/2-PH, ouput to ISO 8764-PH, ChromTop tip, SoftFinish® grip SDK PH0 SDK PH1 SDK PH2 SDK PH3 0 1 2 3 Screwdrivers Weidmüller SoftFinish® screwdriver for general applications. Blade made from through-hardened, high-alloy chromium-vanadium-molybdenum steel, matt chrome-plated. F SDK PZ Crosshead screwdriver, Pozidriv, SDK PZ DIN 5262, ISO 8764/2-PZ, ouput to ISO 8764/1-PZ, ChromTop tip, SoftFinish® grip SDK PZ1 SDK PZ2 SDK PZ3 1 2 3 80 100 150 9008530000 9008540000 9008550000 80 80 100 9009180000 9009170000 9009160000 SD TH Torx® TH screwdriver with hole in tip of blade (tamper-resistant), SD TH for screwing Torx® and Torx®-TH security screws (pin in centre of Torx® recess), ChromTop tip, SoftFinish® grip SD TH10 SD TH15 SD TH20 SK Hexagon socket wrench SK DIN 3125, ouput to DIN 3125, SoftFinish® grip 1327490000 – 2013 SK 10,0x125 10 15 20 9009070000 F.21 Uninsulated screwdriver Uninsulated screwdriver Screwdrivers Weidmüller SoftFinish® screwdriver for general applications. Blade made from through-hardened, high-alloy chromium-vanadium-molybdenum steel, matt chrome-plated. Type Size / AF a b c Order No. Set S 2.5/3.0/4.0/5.5/PH 1/2 6-part set: slotted and crosshead PH screwdriver set with circular blades F Blade type Set S 2.0/2.5/3.0/3.5/4.0/5.5 6-part set: slotted screwdriver set SDS 0.4X2.5X75 SDS 0.5X3.0X80 SDS 0.8X4.0X100 SDS 1.0X5.5X150 SDK PH1 SDK PH2 SD Set S2.5-5.5/PH1/2 A A A A SDS 0.4X2.0X60 SDS 0.4X2.5X75 SDS 0.5X3.0X80 SDS 0.6X3.5X100 SDS 0.8X4.0X100 SDS 1.0X5.5X150 SD Set S2.0-5.5 B A A A A A SD TO 0,6X3,0 A 0.4 2.5 0.5 3 0.8 4 1 5.5 1 2 75 80 100 150 80 100 9009740000 0.4 2 0.4 2.5 0.5 3 0.6 3.5 0.8 4 1 5.5 60 75 80 100 100 150 1 9205560000 70 1323880000 SD TO 0,6x3,0 Angled slotted screwdriver with round handle, SoftFinish® handle F.22 0.6 3 1327490000 – 2013