Circuit Note CN-0073 Devices Connected/Referenced Circuit Designs Using Analog Devices Products Apply these product pairings quickly and with confidence. For more information and/or support call 1-800-AnalogD (1-800-262-5643) or visit www.analog.com/circuit. AD5765 Complete Quad, 16-Bit, High Accuracy DAC ADR420 Precision 4.096 V Voltage Reference High Accuracy, Bipolar Voltage Output Digital-to-Analog Conversion Using the AD5765 DAC CIRCUIT FUNCTION AND BENEFITS There are four possible sources of error to consider when choosing a voltage reference for high accuracy applications: initial accuracy, temperature coefficient of the output voltage, long term drift, and output voltage noise. Table 1 lists other +5V –5V 10µF 10µF 100nF 100nF 100nF BIN/2sCOMP 1 SYNC SCLK 2 SCLK SDIN 3 SDIN SDO 4 SDO REFAB NC REFCD NC AVSS AVDD REFGND SYNC BIN/2sCOMP 32 31 30 29 28 27 26 25 AGNDA 24 VOUTA 23 VOUTA VOUTB 22 VOUTB AGNDB 21 AD5765 CLR 5 CLR AGNDC 20 LDAC 6 LDAC VOUTC 19 VOUTC D0 7 D0 VOUTD 18 VOUTD D1 8 D1 AGNDD 17 ISCC AVSS PGND AVDD 10µF 10µF RSTIN DVCC 10 11 12 13 14 15 16 DGND 9 RSTOUT 100nF 100nF NC = NO CONNECT 10µF +5V +5V –5V 08273-001 A precision voltage reference must be used in order for the DAC to achieve the optimum performance over its full operating temperature range. The AD5765 incorporates reference buffers, which eliminate the need for both a positive and negative external reference and associated buffers. This leads to further savings in both cost and board space. Because the voltages applied to the reference inputs (REFAB, REFCD) are used to generate the buffered positive and negative internal references for the DAC cores, any error in the external voltage reference is reflected in the outputs of the device. 4 100nF The AD5765 is a high performance digital-to-analog converter that offers guaranteed monotonicity, integral nonlinearity (INL) of ±1 LSB (C-grade device), low noise, and a 10 μs settling time. Performance is guaranteed over the following supply voltage ranges: The AVDD supply range is from +4.75 V to +5.25 V, and the AVSS supply range is from −4.75 V to −5.25 V. The nominal full-scale output voltage range is ±4.096 V. VOUT 6 GND VIN RSTIN CIRCUIT DESCRIPTION ADR420 2 RSTOUT This circuit provides high accuracy, bipolar data conversion using the AD5765, a quad, 16-bit, serial input, bipolar voltage output DAC. This circuit utilizes the ADR420 precision reference to achieve optimal DAC performance over a full operating temperature range. The only external components needed for this precision 16-bit DAC are a reference voltage source, decoupling capacitors on the supply pins and reference inputs, and an optional short-circuit current-setting resistor. This implementation, therefore, leads to savings in cost and reduced board space. The circuit is well suited for both closedloop servo control and open-loop control applications. +5V Figure 1. High Accuracy, Bipolar Configuration of the AD5765 DAC Using a Precision Reference 2.048 V precision reference candidates from Analog Devices, Inc., and their respective attributes. In any circuit where accuracy is important, careful consideration of the power supply and ground return layout helps to ensure the rated performance. The PCB on which the AD5765 Rev. 0 “Circuits from the Lab” from Analog Devices have been designed and built by Analog Devices engineers. Standard engineering practices have been employed in the design and construction of each circuit, and their function and performance have been tested and verified in a lab environment at room temperature. However, you are solely responsible for testing the circuit and determining its suitability and applicability for your use and application. Accordingly, in no event shall Analog Devices be liable for direct, indirect, special, incidental, consequential or punitive damages due to any cause whatsoever connected to the use of any“Circuit from the Lab”. (Continued on last page) One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2009 Analog Devices, Inc. All rights reserved. CN-0073 Circuit Note Table 1. Precision 2.048 V References Part Number Initial Accuracy Max (mV) Long-Term Drift Typ (ppm) Temp Drift Max (ppm/°C) 0.1 Hz to 10 Hz Noise Typ (µV p-p) ADR430 ±1 40 3 3.5 ADR420 ±1 50 3 1.75 ADR390 ±4 50 9 5 is mounted must be designed so that the analog and digital sections are physically separated and confined to certain areas of the board. If the AD5765 is in a system where multiple devices require an AGND-to-DGND connection, the connection is to be made at one point only. The star ground point is established as close as possible to the device. The AD5765 must have ample supply bypassing of 10 µF in parallel with 0.1 µF on each supply, located as close to the package as possible, ideally right up against the device. The 10 µF capacitors are the tantalum bead type. The 0.1 µF capacitor must have low effective series resistance (ESR) and low effective series inductance (ESL), such as the common ceramic types, which provide a low impedance path to ground at high frequencies to handle transient currents due to internal logic switching. The power supply traces of the AD5765 must be as wide as possible to provide low impedance paths and reduce the effects of glitches on the power supply line. Fast switching signals, such as clocks, must be shielded with digital ground to avoid radiating noise to other parts of the board and must never be run near the reference inputs. A ground line routed between the SDIN and SCLK lines helps reduce crosstalk between them (not required on a multilayer board, which has a separate ground plane; however, it is helpful to separate the lines). It is essential to minimize noise on the reference inputs because it couples through to the DAC output. Avoid crossover of digital and analog signals. Traces on opposite sides of the board must run at right angles to each other. This reduces the effects of feedthrough on the board. A microstrip technique is recommended but not always possible with a double-sided board. In this technique, the component side of the board is dedicated to the ground plane, and signal traces are placed on the solder side. Best layout and performance are achieved with at least a 4-layer multilayer board, where there are a ground plane layer, a power supply layer, and two signal layers. LEARN MORE Kester, Walt. 2005. The Data Conversion Handbook. Analog Devices. Chapters 3 and 7. MT-015 Tutorial, Basic DAC Architectures II: Binary DACs. Analog Devices. MT-031 Tutorial, Grounding Data Converters and Solving the Mystery of AGND and DGND. Analog Devices. MT-101 Tutorial, Decoupling Techniques. Analog Devices. Voltage Reference Wizard Design Tool. Data Sheets and Evaluation Boards AD5765 Data Sheet. AD5765 Evaluation Board. ADR420 Data Sheet. REVISION HISTORY 6/09—Revision 0: Initial Version (Continued from first page) "Circuits from the Lab" are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors. While you may use the "Circuits from the Lab" in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual property by application or use of the "Circuits from the Lab". Information furnished by Analog Devices is believed to be accurate and reliable. However, "Circuits from the Lab" are supplied "as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability, noninfringement or fitness for a particular purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties that may result from their use. Analog Devices reserves the right to change any "Circuits from the Lab" at any time without notice, but is under no obligation to do so. Trademarks and registered trademarks are the property of their respective owners. ©2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. CN08273-0-6/09(0) Rev. 0 | Page 2 of 2