VJ Commercial Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES • C0G (NP0) and X7R/X5R dielectrics offered • C0G (NP0) is an ultra-stable dielectric offering a very low Temperature Coefficient of Capacitance (TCC) • C0G (NP0) offers low dissipation • Excellent aging characteristics • Ideal for decoupling and filtering (X7R) • Ideal for surge suppression and high voltage applications • Wide range of case sizes, voltage ratings and capacitance values • Wet build process • Reliable Noble Metal Electrode (NME) system • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • • • • Timing and tuning circuits Sensor and scanner applications Decoupling and filtering Surge suppression ELECTRICAL SPECIFICATIONS C0G (NP0) DIELECTRIC X5R, X7R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at + 25 °C unless otherwise specified Note Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 150 °C (above + 125 °C changed characteristics) Operating Temperature: - 55 °C to + 150 °C (X5R above + 85 °C changed characteristics) (X7R above + 125 °C changed characteristics) Capacitance Range: 1 pF to 56 nF Capacitance Range: 120 pF to 6.8 μF Voltage Range: 25 VDC to 1000 VDC Voltage Range: 10 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C Temperature Coefficient of Capacitance (TCC): X5R: ± 15 % from - 55 °C to + 85 °C, with 0 VDC applied X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz 16 V/25 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: At + 25 °C 100 000 M min. or 1000 F whichever is less At + 125 °C 10 000 M min. or 100 F whichever is less Insulating Resistance: At + 25 °C 100 000 M min. or 1000 F whichever is less At + 125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 0 % maximum per decade Aging Rate: 1 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E Applied test voltages 200 VDC-rated: 250 % of rated voltage 500 VDC-rated: 200 % of rated voltage 630 VDC,1000 VDC-rated: 150 % of rated voltage Revision: 14-Jul-11 Dielectric Strength Test: Performed per method 103 of EIA 198-2-E. Applied test voltages 250 VDC-rated: 250 % of rated voltage 500 VDC-rated: min. 150 % of rated voltage 150 % of rated voltage 630 VDC, 1000 VDC-rated: 1 Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 0805 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 100 200 500 630 630 1000 1000 500 1000 1000 10 100 200 250 630 630 1000 1000 1000 500 1000 500 C0G (NP0) X5R X7R CAPACITANCE MINIMUM 1.0 pF 1.0 pF 1.0 pF 1.0 pF 56 pF 18 pF 39 pF 100 pF 270 pF 270 pF 560 nF 120 pF 330 pF 330 pF 330 pF 390 pF 470 pF 1.0 nF 10 nF 15 nF 33 nF 27 nF MAXIMUM 220 pF 820 pF 3.9 nF 10 nF 22 nF 10 nF 22 nF 39 nF 47 nF 56 nF 1.0 μF 47 nF 150 nF 470 nF 1.0 μF 1.0 μF 270 nF 1.0 μF 2.7 μF 2.2 μF 4.7 μF 6.8 μF Note • Detail ratings see selection chart ORDERING INFORMATION VJ0805 (3) Y 102 K X A A T ### (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 A = C0G (NP0) Y = X7R G = X5R (4) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples 1R8 = 1.8 pF 102 = 1000 pF Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V G = 1000 V A= Unmarked M = Marked Note: Marking is only available for 0805 and 1206 with termination code “X” X = Ni barrier B = ± 0.10 pF C = ± 0.25 pF 100 % tin plated matte finish D = ± 0.5 pF F, E = AgPd F=±1% B = Polymer G=±2% 100 % tin plated J=±5% matte finish (5) K = ± 10 % M = ± 20 % Note: C0G (NP0): B, C, D < 10 pF F, G, J, K 10 pF X7R/X5R: J, K, M C = 7" reel/paper tape T = 7" reel/plastic tape P = 11 1/4"/13" reel/ paper tape R = 11 1/4"/13" reel/ plastic tape O = 7" reel/flamed paper tape I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” are used for “F”, “E” termination size 0402/0603/0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process code may be added with up to three digits, used to control non-standard products and/or special requirements (3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements (4) Selected values for X5R, see selection chart (5) Selected values available, contact [email protected] for list of released ratings (6) Termination code “E” is for conductive epoxy assembly Revision: 14-Jul-11 2 Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P EIA CODE STYLE LENGTH (L) WIDTH (W) TERMINATION (P) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004/- 0.002 (1.00 + 0.10/- 0.05) 0.020 + 0.004/- 0.002 (0.50 + 0.10/- 0.05) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.005 (1.60 ± 0.12) 0.031 ± 0.005 (0.80 ± 0.12) 0.036 (0.92) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 VJ1206 0.126 ± 0.008 (3.20 ± 0.20) 0.063 ± 0.008 (1.60 ± 0.20) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 VJ1210 0.126 ± 0.008 (3.20 ± 0.20) 0.098 ± 0.008 (2.50 ± 0.20) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) - VJ1808 0.180 ± 0.012 (4.57 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 1812 VJ1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 1825 VJ1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) - VJ2220 0.220 ± 0.008 (5.59 ± 0.20) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) - VJ2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) - VJ3640 0.360 ± 0.015 (9.14 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) Note • Polymer (B-termination) have increased dimensions: Length 0.006"(0.15 mm) Revision: 14-Jul-11 3 Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 VJ1206 (1) EIA CODE 0402 0603 0805 1206 VOLTAGE (VDC) 25 50 100 50 100 200 50 100 200 500 50 100 200 500 VOLTAGE CODE X A B A B C A B C E A B C E CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R2 1.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R5 1.5 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R8 1.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 2R2 2.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 2R7 2.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 3R3 3.3 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 3R9 3.9 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 4R7 4.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 5R6 5.6 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 6R8 6.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 8R2 8.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 100 10 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 120 12 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 150 15 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 180 18 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 220 22 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 270 27 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 330 33 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 390 39 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 470 47 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 560 56 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 680 68 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 820 82 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 101 100 pF •• •• •• •• •• •• •• •• •• •• • • • • 121 120 pF •• •• •• •• •• •• •• •• •• •• • • • • 151 150 pF •• •• •• •• •• •• •• •• •• • • • • 181 180 pF •• •• •• •• • •• •• •• •• • • • • 221 220 pF •• •• •• •• • •• •• •• • • • • • 271 270 pF •• •• • •• •• •• • • • • • 331 330 pF •• •• •• •• •• • • • • • 391 390 pF •• •• •• •• •• • • • • • 471 470 pF •• •• •• • • • • • • 561 560 pF •• •• •• • • • • • 681 680 pF •• •• •• • • • • • 821 820 pF • •• •• • • • • • 102 1.0 nF •• •• • • • • • 122 1.2 nF •• • • • • 152 1.5 nF •• • • • • 182 1.8 nF • • • • 222 2.2 nF • • • • 272 2.7 nF • • • • 332 3.3 nF • • • • 392 3.9 nF • • • 472 4.7 nF • • 562 5.6 nF • • 682 6.8 nF • • 822 8.2 nF • • 103 10 nF • • 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 •• Paper tape • Plastic tape Revision: 14-Jul-11 4 630 L •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • • • • • • 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1210 (1) 1210 100 200 500 630 B C E L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) VJ1812 (1) STYLE VJ1808 (1) EIA CODE 1812 50 100 200 500 1000 50 100 200 500 VOLTAGE (VDC) VOLTAGE CODE A B C E G A B C E CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF • 220 22 pF • • 270 27 pF • • 330 33 pF • • 390 39 pF • • • • • • 470 47 pF • • • • • • 560 56 pF • • • • • • 680 68 pF • • • • • • 820 82 pF • • • • • • 101 100 pF • • • • • • 121 120 pF • • • • • • • 151 150 pF • • • • • • • 181 180 pF • • • • • • • 221 220 pF • • • • • • • • • 271 270 pF • • • • • • • • • 331 330 pF • • • • • • • • • 391 390 pF • • • • • • • • • 471 470 pF • • • • • • • • • 561 560 pF • • • • • • • • • 681 680 pF • • • • • • • • • 821 820 pF • • • • • • • • • 102 1.0 nF • • • • • • • • • 122 1.2 nF • • • • • • • • 152 1.5 nF • • • • • • • • 182 1.8 nF • • • • • • • • 222 2.2 nF • • • • • • • 272 2.7 nF • • • • • • • 332 3.3 nF • • • • • • • 392 3.9 nF • • • • • • • 472 4.7 nF • • • • • • • 562 5.6 nF • • • • • • 682 6.8 nF • • • • • • 822 8.2 nF • • • • • 103 10 nF • • • • 123 12 nF • • • 153 15 nF • • 183 18 nF • 223 22 nF • 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic tape Revision: 14-Jul-11 5 1000 G • • • • • • • • • • • • • • • • • • • • • • 50 A • • • • • • • • • • • • • • • • • • • • VJ1825 (1) 1825 100 200 B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 500 E • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ2220 (1) EIA CODE 2220 50 100 200 500 630 1000 50 VOLTAGE (VDC) VOLTAGE CODE A B C E L G A CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF • • • • • • 331 330 pF • • • • • • 391 390 pF • • • • • • 471 470 pF • • • • • • 561 560 pF • • • • • • 681 680 pF • • • • • • 821 820 pF • • • • • • 102 1.0 nF • • • • • • 122 1.2 nF • • • • • • • 152 1.5 nF • • • • • • • 182 1.8 nF • • • • • • • 222 2.2 nF • • • • • • • 272 2.7 nF • • • • • • • 332 3.3 nF • • • • • • • 392 3.9 nF • • • • • • • 472 4.7 nF • • • • • • • 562 5.6 nF • • • • • • 682 6.8 nF • • • • 822 8.2 nF • • • • 103 10 nF • • • • 123 12 nF • • • • 153 15 nF • • • • 183 18 nF • • • 223 22 nF • • • 273 27 nF • • • 333 33 nF • • • 393 39 nF • • 473 47 nF • • 563 56 nF • Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic tape Revision: 14-Jul-11 6 100 B • • • • • • • • • • • • • • • • • • • • VJ2225 (1) 2225 200 C • • • • • • • • • • • • • • • • • • • • 500 E 1000 G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R (2) STYLE VJ0402 VJ0603 EIA CODE 0402 0603 VOLTAGE (VDC) 16 25 50 100 16 25 50 100 200 10 VOLTAGE CODE J X A B J X A B C Q CAP. CODE CAP. 121 120 pF •• •• •• •• 151 150 pF •• •• •• •• 181 180 pF •• •• •• •• 221 220 pF •• •• •• •• 271 270 pF •• •• •• •• 331 330 pF •• •• •• •• •• •• •• 391 390 pF •• •• •• •• •• •• •• •• •• 471 470 pF •• •• •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• •• •• 272 2.7 nF •• •• •• •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• •• •• •• 392 3.9 nF •• •• •• •• •• •• •• •• •• 472 4.7 nF •• •• •• •• •• •• •• •• •• 562 5.6 nF •• •• •• •• •• •• •• 682 6.8 nF •• •• •• •• •• •• •• 822 8.2 nF •• •• •• •• •• •• •• 103 10 nF •• •• •• •• •• •• •• 123 12 nF •• •• •• •• •• •• 153 15 nF •• •• •• •• •• •• 183 18 nF •• •• •• •• •• •• 223 22 nF •• •• •• •• •• 273 27 nF •• •• •• •• •• 333 33 nF •• •• •• •• •• 393 39 nF •• •• •• •• •• 473 47 nF •• •• •• •• 563 56 nF •• •• •• 683 68 nF •• •• •• 823 82 nF •• •• •• 104 100 nF •• •• •• 124 120 nF •• 154 150 nF •• 184 180 nF 224 220 nF 274 270 nF 334 330 nF 394 390 nF 474 470 nF 564 560 nF • X5R 684 680 nF • X5R 824 820 nF • X5R 105 1.0 μF • X5R 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 (2) X5R (- 55 °C to + 85 °C TCC: ± 15 %) for all 0805/10 V ratings •• Paper tape • Plastic tape Revision: 14-Jul-11 7 16 J •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • VJ0805 (2) 0805 25 50 100 X A B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • 250 P •• •• •• •• •• •• •• •• •• •• •• •• • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1206 (1) EIA CODE 1206 (1) VOLTAGE (VDC) 16 25 50 100 200 250 500 630 16 25 VOLTAGE CODE J X A B C P E L J X CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF •• •• 391 390 pF •• •• 471 470 pF •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• 272 2.7 nF •• •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• •• 392 3.9 nF •• •• •• •• •• •• •• 472 4.7 nF •• •• •• •• •• •• •• 562 5.6 nF •• •• •• •• •• •• • 682 6.8 nF •• •• •• •• •• •• • 822 8.2 nF •• •• •• •• •• •• • 103 10 nF •• •• •• •• •• • •• • • • 123 12 nF •• •• •• •• •• • • • • • 153 15 nF •• •• •• •• •• • • • • • 183 18 nF •• •• •• •• •• • • • • • 223 22 nF •• •• •• •• •• • • • 273 27 nF •• •• •• •• •• • • • 333 33 nF •• •• •• •• •• • • • 393 39 nF •• •• •• •• • • • • 473 47 nF •• •• •• •• • • • • 563 56 nF •• •• •• •• • • • • 683 68 nF •• •• •• •• • • • • 823 82 nF •• •• •• • • • • • 104 100 nF •• •• •• • • • • • 124 120 nF •• •• •• • • • 154 150 nF •• •• • • • • 184 180 nF •• •• • • • • 224 220 nF •• •• • • • • 274 270 nF •• •• • • • • 334 330 nF • • • • • 394 390 nF • • • • • 474 470 nF • • • • • 564 560 nF • • • • 684 680 nF • • • • 824 820 nF • • • • 105 1.0 μF • • • • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 •• Paper tape • Plastic tape Revision: 14-Jul-11 8 50 A • • • • • • • • • • • • • • • • • • • • • • • • • VJ1210 (1) 1210 (1) 100 200 B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 250 P • 500 E 630 L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1808 (1) VJ1812 (1) EIA CODE 1812 VOLTAGE (VDC) 50 100 200 500 1000 25 50 100 200 250 500 630 1000 VOLTAGE CODE A B C E G X A B C P E L G CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF • 561 560 pF • 681 680 pF • 821 820 pF • 102 1.0 nF • • • • • 122 1.2 nF • • • • • 152 1.5 nF • • • • • 182 1.8 nF • • • • • 222 2.2 nF • • • • • 272 2.7 nF • • • • • 332 3.3 nF • • • • • 392 3.9 nF • • • • • 472 4.7 nF • • • • • • 562 5.6 nF • • • • • • 682 6.8 nF • • • • • • 822 8.2 nF • • • • • • 103 10 nF • • • • • • • • • 123 12 nF • • • • • • • • 153 15 nF • • • • • • • • 183 18 nF • • • • • • • • 223 22 nF • • • • • • • • • • • 273 27 nF • • • • • • • • • • • 333 33 nF • • • • • • • • • 393 39 nF • • • • • • • • • 473 47 nF • • • • • • • • • 563 56 nF • • • • • • • • • 683 68 nF • • • • • • • • • 823 82 nF • • • • • • • • • 104 100 nF • • • • • • • • • • 124 120 nF • • • • • • • 154 150 nF • • • • • • • 184 180 nF • • • • • • • 224 220 nF • • • • • • 274 270 nF • • • • • • 334 330 nF • • • • • 394 390 nF • • • • 474 470 nF • • • • 564 560 nF • • • 684 680 nF • • • 824 820 nF • • • 105 1.0 μF • • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Note (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic tape Revision: 14-Jul-11 9 25 X 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1825 (1) 1825 100 200 250 500 B C P E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1000 G • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ2220 (1) VJ2225 (1) EIA CODE VOLTAGE (VDC) 50 100 200 500 25 50 100 200 500 VOLTAGE CODE A B C E X A B C E CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF • 183 18 nF • 223 22 nF • 273 27 nF • 333 33 nF • • • • • • 393 39 nF • • • • • • 473 47 nF • • • • • • 563 56 nF • • • • • • 683 68 nF • • • • • • 823 82 nF • • • • • • 104 100 nF • • • • • • • 124 120 nF • • • • • • • 154 150 nF • • • • • • • 184 180 nF • • • • • • • 224 220 nF • • • • • • • • 274 270 nF • • • • • • • • 334 330 nF • • • • • • • • 394 390 nF • • • • • • • 474 470 nF • • • • • • • 564 560 nF • • • • • • • 684 680 nF • • • • • • • 824 820 nF • • • • • • • 105 1.0 μF • • • • • • • 125 1.2 μF • • • • • • 155 1.5 μF • • • • 185 1.8 μF • • • • 225 2.2 μF • • • 275 2.7 μF • • 335 3.3 μF • 395 3.9 μF • 475 4.7 μF • 565 5.6 μF 685 6.8 μF Note (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic tape Revision: 14-Jul-11 10 1000 G 25 X VJ3640 (1) 50 100 200 A B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 500 E • • • • • • • • • • • • • • • • • • Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS INSULATION RESISTANCE VS. TEMPERATURE 10 000 1.5 INSULATION RESISTANCE (ΩF) % CAPACITANCE CHANGE TEMPERATURE COEFFICIENT OF CAPACITANCE 2.0 1.0 1000 0.5 0.0 - 0.5 NP0 100 - 1.0 - 1.5 - 2.0 10 - 75 - 50 - 25 10 0 25 50 75 100 125 150 175 TEMPERATURE °C 150 0.2 % CAPACITANCE CHANGE 0.1 0.0 - 0.1 0.1 0.0 - 0.1 - 0.2 - 0.2 1 10 100 HOURS 1000 10 000 0 10 CHANGE OF CAPACITANCE WITH FREQUENCY 40 50 60 70 DC VOLTS APPLIED 80 90 100 DISSIPATION FACTOR 0.0005 0 -1 -2 Revision: 14-Jul-11 30 DISSIPATION FACTOR VS. FREQUENCY 1 1 kHz 20 0.001 2 % CAPACITANCE CHANGE 100 50 TEMPERATURE °C VOLTAGE COEFFICIENT OF CAPACITANCE AGING RATE 0.2 % CAPACITANCE CHANGE 25 10 kHz 100 kHz FREQUENCY 0.00025 1 kHz 1 MHz 11 10 kHz 100 kHz FREQUENCY 1 MHz Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon X7R/X5R DIELECTRIC - TYPICAL PARAMETERS INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE COEFFICIENT OF CAPACITANCE 10 000 10 INSULATION RESISTANCE (ΩF) % CAPACITANCE CHANGE 15 X5R 5 0 1000 -5 X7R - 10 - 15 - 20 - 25 100 10 - 30 - 75 - 50 - 25 0 20 50 75 100 125 150 175 TEMPERATURE °C 10 AGING RATE DISSIPATION FACTOR VS. TEMPERATURE 1.0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 % CAPACITANCE CHANGE % DISSIPATION FACTOR 150 25 100 TEMPERATURE °C X5R X7R 0.0 - 1.0 - 2.0 - 3.0 - 4.0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 TEMPERATURE °C 1 RATED VOLTAGE VS. TEMPERATURE 10 100 HOURS 1000 10 000 VOLTAGE COEFFICIENT OF CAPACITANCE % CAPACITANCE CHANGE 5 % RATED VOLTAGE 200 150 X7R 100 50 0 -5 - 10 25 V RATED - 15 - 20 50 V RATED - 25 - 30 0 0 - 75 - 50 - 25 0 20 50 75 100 125 150 175 180 TEMPERATURE °C DISSIPATION FACTOR VS. VOLTAGE 10 20 30 40 50 60 70 80 DC VOLTS APPLIED 90 100 DISSIPATION FACTOR VS. VOLTAGE 0.020 DISSIPATION FACTOR 0.020 DISSIPATION FACTOR 100 V RATED 0.016 0.012 50 V 0.008 100 V 0.004 0 0.012 0.008 200 V 0.000 0 10 20 30 40 50 60 70 80 90 100 DC VOLTS APPLIED Revision: 14-Jul-11 0.016 100 12 500 V/630 V 200 300 400 500 DC VOLTS APPLIED 600 700 Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon STANDARD PACKAGING QUANTITIES (1)(2)(3) 7" REEL QUANTITIES BODY SIZE TAPE SIZE 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING CODE “C”/“O” PLASTIC TAPE PACKAGING CODE “T” PAPER TAPE PACKAGING CODE “P”/“I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 10 000 n/a 0603 (4) 8 mm 4000 4000 10 000 10 000 0805 (4) 8 mm 3000 3000 10 000 10 000 1206 (4) 8 mm 3000 3000/2500 10 000 10 000/9000 1210 (4) 8 mm n/a 3000/2500/2000 n/a 10 000/9000 1808 12 mm n/a 2000 n/a 10 000 1812 12 mm n/a 1000 n/a 4000 1825 12 mm n/a 1000 n/a 4000 2220 12 mm n/a 1000 n/a 4000 2225 12 mm n/a 1000 n/a 4000 3640 16 mm n/a 500 n/a n/a Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) N/A = Not available (4) Packaging “C”/”P”/”O”/”I” and “T”/”R” or lower quantities can depend from product thickness STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to + 40 °C ambient temperature and 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 14-Jul-11 13 Document Number: 45199 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1