V ishay I n tertech n o l o g y, I n c . Capacitors - Suitable For High-Frequency Applications I INNOVAT AND TEC O L OGY VJ HIGHFREQ Series N HN Multilayer Ceramic Chip Capacitors O 19 62-2012 Surface-Mount Multilayer Ceramic Chip Capacitors for High-Frequency Applications Key Benefits APPLICATIONS • • • • Low dissipation factor (≤ 0.05 %) High Q (≥ 2000) Tight tolerance: as tight as ± 0.1 pF Broad working voltages –– 0402: 25 V to 200 V –– 0603: 25 V to 250 V –– 0805: 25 V to 250 V • Wide capacitance range: 1 pF to 1.5 nF • • • • Filter networks Matching networks Amplifier circuits DC blocking circuits Resources • Datasheet: VJ HIGHFREQ Series - http://www.vishay.com/doc?45071 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 *Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0320-1205 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 • Reliable Noble Metal Electrode (NME) system I INNOVAT O L OGY Multilayer Ceramic Chip Capacitors Note HN • • Made with a combination of design, materials and tight V ishay I nachieve tertech o lreliability o g y, I n c .• process control to very highnfield • AND TEC • Material categorization: For definitions of compliance N O please see www.vishay.com/doc?99912 • * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. VJ HIGHFREQ Series ELECTRICAL SPECIFICATIONS 19 6 • Broadband wireless communication Subscriber 0603:•1.0 pF to 470based pF wireless devices www.vishay.com Voltage Rating: 25 VDC to 250 VDC Note • QUICK ElectricalREFERENCE characteristics atDATA 25 °C unless otherwise specified DIELECTRIC Operating Temperature: - 55 °CCASE to + 125 °C D = HIFREQ 0805 Voltage Rating: 25 VDC to 250 VDC ORDERING INFORMATION VJ0603 D 1R0 Temperature Coefficient of Capacitance (TCC):B 1.0 pF At + 12 100 F, Performe Dielectric Strength Test: X The first two digits D = ± 0.50 pF third is a multiplier. An “R” indicates a decimal point. Examples: 1R0 = 1.0 pF G=±2% J=±5% K = ± 10 % M = ± 20 % C0G (D): 0.05 % max. at 1.0 VRMS andthe 1 MHz F = ± 1 % are significant, Note Details see selection chart B = 100 V 100 % tin plate C = 200 V matte finish T = 7" reel/plastic tape N Revision: = Non-magnetic 11-Apr-12P = 250 V 1 C = 7" reel/paper tape L = Ni barrier O = 7" reel/flamed paper tape For technical questions, contact: mlccrf with tin lead J = 7" reel (low quantity) CHANGE NOTICE. THE PRODU platedTHIS finishDOCUMENT IS SUBJECTRTO = 11 1/4"/13" WITHOUT reel/ ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH min. 4 % lead plastic tape P = 11 1/4"/13" reel/ paper tape I = 11 1/4"/13" reel/ flamed paper tape B = Bulk Note “I” and “O” is used for “E”/”N” Revision: 11-Apr-12 Document 1 termination code Number: 45071 For technical questions, contact: [email protected] Notes THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT (1) DC voltage rating shouldARE SUBJECT SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 not be exceededTO in application Termination code “E” is for conductive epoxy assembly DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE At + 25 1000 F 470 pF A C Performed per Bmethod 103 of EIA-198-2-E. CASE DIELECTRIC CAPACITANCE CAPACITANCE DC VOLTAGE MARKING PACKAGING C0G (D): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C TERMINATION (1) CODE NOMINAL CODE TOLERANCE Applied testRATING voltages: with zero (0) VDC applied 200 V -rated: 250 % of rated voltage DC 0402 D = HIFREQ Expressed in E = AgPd (2) X = 25 V B = ± 0.10 pF A = No rated voltage > 200 V -rated: 200 % ofmarking Dissipation Factor (DF): picofarads (pF). 0603 C = ± 0.25 pF X = Ni barrier DC A = 50 V (2) Insulatio Applied 200 VD At + 25 °C 1.0 and rated voltage 1001.5000 M minimum or > 200 VD (DF): 250 Dissipation Factor pF nF 1000 F, whichever is less C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz At + 125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less 250 0603: 1.0 pF to 470 pF Note •0805: For values 1.0nF pF, contact [email protected] 1.0 pFbelow to 1.5 0805 Aging R C0G (D): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C 200 1.0 82 pF with zero (0)pF VDC applied Insulation Resistance (IR): 0603 0402: 1.0 pF to 82 pF VolP n • Subsc Dielectr Temperature CoefficientCAPACITANCE of Capacitance (TCC): MAXIMUM VOLTAGE Aging Rate: 0 % maximum per decade (V) MINIMUM MAXIMUM 0402 Capacitance Range: Vishay Vitramon 0805: 1.0 pF to 1.5 nF ELECTRICAL SPECIFICATIONS Satellit WiFi (8 12 Operating Temperature: - 55 °C to + 125 °C • Satellite communication Surface-Mount Multilayer Ceramic Chip Capacitors Preliminary • WiFi (802.11) Capacitance Range:and WiMax (802.16) for High-Frequency0402: Applications •1.0 VolP pF networks to 82 pF and cellular base stations VJ HIFREQ Series Revision: 11-Apr-12 Capacitors - Suitable For High-Frequency Applications 2-20 Note APPLICATIONS • Electrical characteristics at 25 °C unless otherwise specified Broadb TERMINATIONS PAD (P) STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 ± 0.004 (1.02 ± 0.10) 0.020 ± 0.004 (0.51 ± 0.10) 0.021 (0.61) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.005 (0.80 ± 0.12) 0.036 (0.92) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) Revision: 11-Apr-12 Document Number: 45071 2 VMN-PT0320-1205 For technical questions,2/2 contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000