ETC 222233840103

BCcomponents
DATA SHEET
MKP 338 4 X2
Interference suppression film
capacitors
Product Specification
NEW
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
Product Specification
Interference suppression film capacitors
MKP RADIAL POTTED TYPE
MKP 338 4 X2
PITCH 15/22.5/27.5/37.5/55 mm
296x12(full_width)
CBB258
Fig.1 Simplified outlines.
FEATURES
QUICK REFERENCE DATA(1)
• 15 to 55 mm lead pitch
• Supplied loose in box
• Consists of a low-inductive wound
cell of metallized polypropylene
film, potted in a flame-retardant case
• Fixed and insulated leads.
APPLICATIONS
• For X2 electromagnetic interference
suppression
• Specially designed to meet the
requirements of the
“IEC 60384-14 2nd edition and
EN 132400”, requiring a 2.5 kV
peak pulse voltage test, and the
UL1283 specifications.
DETAIL SPECIFICATION
DESCRIPTION
0.01 to 10 µF
Capacitance tolerance
±20%; ±10%
Rated (AC) voltage, 50 to 60 Hz
300 V
Rated (DC) voltage
630 V
Climatic category
55/105/56/B
Rated temperature
105 °C
Maximum application temperature
105 °C
Reference specifications
IEC 60384-14 2nd edition and
EN 132400
Safety approvals:
ENEC; UL1283 and CSA-C22.2 No.8
Materials
qualified in accordance with
UL94V-O
Safety class
X2; across the line
Note
1. Under development.
For more detailed data and test
requirements see “Type detail
specification HQN-384-14/120”.
2001 Jun 22
VALUE
Capacitance range (E12 series)
2
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
SAFETY APPROVALS AND SAFETY TEST REPORT
Approvals
SAFETY APPROVALS (X2)
R
02
VOLTAGE
VALUE
FILE NUMBERS
UL1283 and
CSA-C22.2 No.8
300 V (AC)
10 nF to 10 µF
pending
EN132400
300 V (AC)
10 nF to 10 µF
pending
VOLTAGE
300 V (AC)
VALUE
10 nF to 10 µF: 55/105/56/B
pending
Safety test report
SAFETY TEST REPORT
CB TEST CERTIFICATE
FILE NUMBERS
The Enec-approval together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany;
Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway, Portugal; Slovenian; Spain; Sweden; Switzerland and
United Kingdom.
2001 Jun 22
3
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
COMPOSITION OF CATALOGUE NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
7.5 mm (bent back)
15.0 mm
338 4
X2
22.5 mm
27.5 mm
1
3
CAPACITANCE
10
4
(numerically)
100
5
1000
6
37.5 mm
55.0 mm
Example:
104 = 10 x 10 = 100 nF
2222
TYPE
PACKAGING
338
4.
LEAD CONFIGURATION
XX X
C-TOL PREFERRED TYPES
44
lead length 3.5 mm
338 4
loose in box
X2
lead length 5.0 mm
±20%
lead length 25.0 mm
taped
40
41
4.
15.0 mm bent back to 7.5 mm
ON REQUEST
insulated leads stranded Cu-wire 0.5 mm2
for 37.5 and 55 mm pitch
338 4
loose in box
X2
45
lead length 5.0 mm
42
insulated leads stranded Cu-wire 0.5 mm2
for 37.5 and 55 mm pitch
2001 Jun 22
4.
lead length 3.5 mm
lead length 25.0 mm
taped
±20%
15.0 mm bent back to 7.5 mm
4
±10%
43
4.
4.
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
MKP 338 GENERAL DATA
296x12(full_width)
PITCH 15/22.5/27.5 mm
PITCH 7.5 mm (bent back leads)
l
b
l
b
h
h h'
F'
lt
(1)
F
Ødt
P
Ødt
H
10
15
Dimensions in mm.
(1) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
CBA750
Fig.3 Outline.
Specific reference data for the 300 V AC (X2) capacitors
DESCRIPTION
Tangent of loss angle:
C ≤ 470 nF
470 nF < C ≤ 1 µF
1 µF < C ≤ 3.3 µF
Rated voltage pulse slope (dU/dt)R at 420 V (DC)
R between leads, for C ≤ 0.33 µF at 100 V; 1 minute
RC between leads, for C > 0.33 µF at 100 V; 1 minute
R between leads and case; 100 V; 1 minute
Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s:
C ≤ 1µF
1 µF < C ≤ 3.3 µF
Withstanding (AC) voltage between leads and case
at 1 kHz
≤10 × 10−4
≤20 × 10−4
≤30 × 10−4
VALUE
at 10 kHz
≤20 × 10−4
≤70 × 10−4
−
100 V/µs
>15000 MΩ
>5000 s
>30000 MΩ
at 100 kHz
≤100 × 10−4
−
−
2200 V; 1 minute
1850 V; 1 minute
2200 V; 1 minute
Available 300 V AC (X2) versions
PACKAGING(1)
DIMENSIONS
C-tol
±20%
±10%
±20%
±10%
±20%
±10%
±20%
±10%
lead length 3.5 mm
Loose in box
lead length 5.0 mm
lead length 25.0 mm
Taped
15.0 mm bent back to 7.5 mm
Notes
1. Taped on reel pitch = 27.5 mm is not available.
2. Other dimensions for ±10% tolerance values.
2001 Jun 22
5
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 338 44...
2222 338 45...; note 2
2222 338 40...
2222 338 42...; note 2
2222 338 41...
2222 338 43...; note 2
2222 338 4....
2222 338 4....; note 2
ORDERING
preferred
on request
preferred
on request
preferred
on request
preferred
on request
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
URac = 300 V (X2); URdc = 630 V
loose and taped
CATALOGUE NUMBER
LOOSE IN BOX
DIMENSIONS(2)
b×h×l
(mm)
C(1)
(µF)
MASS
(g)
lt = 3.5 ±0.3mm
REEL
lt = 5.0 ±0.3mm lt = 25.0 ±2.0mm
H = 16.0 mm;
P0 = 15.0 mm
C-tol = ±20%
catalogue number
last 5 digits
last 5 digits
Pitch = 15.0 ±0.4 mm; dt = 0.60 ±0.06 mm
last 5 digits
pitch = 7.5 mm
(bent back)
0.01
2222 338 44103
.. 40103
.. 41103
.. 48001
0.015
2222 338 44153
.. 40153
.. 41153
.. 48002
0.022
2222 338 44223
.. 40223
.. 41223
.. 48003
2222 338 44333
.. 40333
.. 41333
.. 48004
0.047
2222 338 44473
.. 40473
.. 41473
.. 48005
0.068
2222 338 44683
.. 40683
.. 41683
.. 48006
2222 338 44104
.. 40104
.. 41104
.. 48007
0.033
0.1
5.0 × 11.0 (13.0) × 17.5
6.0 × 12.0 (14.0) × 17.5
1.2
1.4
Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm
pitch = 7.5 mm
(bent back)
0.15
7.0 × 13.5 (15.5) × 17.5
1.9
2222 338 44154
.. 40154
.. 41154
.. 48008
0.22
8.5 × 15.0 (17.0) × 17.5
2.6
2222 338 44224
.. 40224
.. 41224
.. 48009
0.33
10.0 × 16.5 (18.5) × 17.5
3.1
2222 338 44334
.. 40334
.. 41334
.. 48011
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm
pitch = 7.5 mm
(bent back)
0.47
8.5 × 18.0 × 26.0
4.5
2222 338 44474
.. 40474
.. 41474
0.68
10.0 × 19.5 × 26.0
5.5
2222 338 44684
.. 40684
.. 41684
1.0
12.0 × 22.0 × 26.0
7.8
2222 338 44105
.. 40105
.. 41105
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm
pitch = 7.5 mm
(bent back)
1.5
15.0 × 25.0 × 31.0
12.8
2222 338 44155
.. 40155
.. 41155
2.2
18.0 × 28.0 × 31.0
17.2
2222 338 44225
.. 40225
.. 41225
3.3
21.0 × 31.0 × 31.0
20.4
2222 338 44335
.. 40335
.. 41335
Notes
1. Under development.
2. Dimensions in brackets for bent back leads.
2001 Jun 22
not available
6
not available
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
MKP GENERAL DATA
PITCH 37.5/55 mm
b
l
296x12(full_width)
h
lt
Ødt
P
CBA196
Fig.4 Outline.
Specific reference data for the 300 V AC (X2) capacitors
DESCRIPTION
VALUE
Tangent of loss angle
at 1 kHz
2.2 µF < C ≤ 4.7 µF
≤50 × 10−4
4.7 µF < C ≤ 10 µF
≤100 × 10−4
100 V/µs
Rated voltage pulse slope (dU/dt)R at 420 V (DC)
>5000 s
RC between leads at 100 V; 1 minute
>30000 MΩ
R between leads and case; 100 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
1400 V; 1 minute
Withstanding (AC) voltage between leads and case
2200 V; 1 minute
Available 300 V AC (X2) versions
PACKAGING
DIMENSIONS
C-tol
lead length 5.0 mm; note 1
Loose in box
lead length 25.0 mm; note 1
insulated leads stranded Cu-wire 0.5 mm2
for 37.5 and 55 mm pitch
±20%
2222 338 40...
±10%
2222 338 42...; note 2
7
preferred
on request
2222 338 41...
±10%
2222 338 43...; note 2
on request
±20%
2222 338 4....
on request
±10%
2222 338 4....; note 2
on request
1. Lead length 3.5 mm for pitch = 37.5 and 55 mm is not availible.
2001 Jun 22
ORDERING
±20%
Notes
2. Other dimensions for ±10% tolerance values.
FIRST 9 DIGITS OF
CATALOGUE NUMBER
preferred
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
URac = 300 V (X2); URdc = 630 V
loose
CATALOGUE NUMBER
C(1)
(µF)
DIMENSIONS
b×h×l
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
lt = 25.0 ±2.0 mm
C-tol = ±20%
catalogue number
last 5 digits
Pitch = 37.5 ±0.7 mm; dt = 1.0 ±0.1 mm
4.7
18.0 × 35.0 × 42.0
30.0
2222 338 40475
... 41475
6.8
21.0 × 38.0 × 42.0
35.0
2222 338 40685
... 41685
50.0
2222 338 40106
... 41106
Pitch = 55.0 ±1.0 mm; dt = 1.0 ±0.1 mm
10.0
21.0 × 38.0 × 59.5
Note
1. Under development.
2001 Jun 22
8
BCcomponents
Product Specification
Interference suppression film capacitors
CONSTRUCTION
MKP 338 4 X2
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
Description
In order to withstand vibration and shock tests, it must be
ensured that the stand-off pips are in good contact with the
printed-circuit board:
• Low-inductive wound cell of metallized polypropylene
(PP) film, potted with epoxy resin (for original pitch
≤ 27.5 mm) and polyurethane and epoxy resin (for pitch
>27.5 mm) in a flame-retardant case
• For pitches ≤15 mm capacitors shall be mechanically
fixed by the leads.
• Radial leads, solder-coated
• For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
• Small stand-off pips allow removal of solder flux etc.
during cleaning of the printed-circuit board
• Radial insulated leads; stranded Cu-wire with PVC
isolation for pitch >27.5 mm on request
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors is shown
in Fig.6:
• Eccentricity as in Fig.6. The maximum eccentricity is
smaller than or equal to the lead diameter of the product
concerned.
144x12(halfpage)
MKP metallized polypropylene film
• Product height with seating plane as given by
“IEC 60717” as reference: hmax ≤ h + ∆ mm or
hmax ≤ h’ + ∆ mm.
144x12(halfpage)
bmax = b + ∆ mm
eccentricity
metal spray layer
connecting wire
lmax = l + ∆ mm
CBA198
CBB181
(1) ∆ = 0.3 mm for P ≤ 27.5 mm.
∆ = 1.0 mm for P > 27.5 mm.
Fig.6 Lay-out.
Fig.5 Construction.
Storage temperature
Mounting
• Storage temperature: Tstg = −25 to +40 °C with RH
maximum 80% without condensation.
NORMAL USE
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting on printed-circuit boards by means of
automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packaging information”.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient temperature of 23 ±1 °C, an atmospheric pressure
of 86 to 106 kPa and a relative humidity of 50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20%.
2001 Jun 22
9
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
CHARACTERISTICS
Capacitance
CBA505
296x12(full_width)
4
∆C/C
(%)
2
typical
0
max.
-2
-4
min.
-6
-50
0
50
100
Tamb (°C)
Fig.7 Capacitance change at 1 kHz as a function of temperature.
Tangent of loss angle
CBB177
296x12(full_width)
10 3
dissipation
factor
(x 10-4)
10 2
.2
C
>2
µF
1µ
F<
220
nF
F
47 n
F
10 n
10 1
10 0
10 1
10 2
10 3
10 4
Fig.8 Tangent of loss angle as a function of frequency: typical curves.
2001 Jun 22
10
f (Hz)
C≤
<
<C
2.2
µF
1µF
C≤
0
≤ 22
nF
F
47 n
< C≤
nF
C ≤ 10
10 5
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
Impedance
CBB185
296x12(full_width)
10 3
Impedance
(Ω)
10 2
10
10 n
F
47 n
F
100
nF
1
470
nF
100
0 nF
10 0
470
0n
F
10 µ
F
10-1
10-2
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.9 Impedance as a function of frequency: typical curves.
Resonant frequency
CBB248
2
296x12(full_width)
10
f
(MHz)
10 1
X2
10 0
10
-1
1nF
10 nF
100 nF
1000 nF
Fig.10 Resonant frequency as a function of capacitance: typical curve.
2001 Jun 22
11
C (nF)
10 µF
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤ 105 °C
CBB187
296x12(full_width)
10 3
AC voltage
(V)
10 2
10 1
10 1
10 2
10 3
10 4
10 5
f (Hz)
Fig.11 AC voltage (RMS value) as a function of frequency at Tamb ≤ 105 °C.
CBB319
296x12(full_width)
10 4
10000 nF
AC current
(mA)
4700 nF
10 3
1000 nF
470 nF
10 2
100 nF
47 nF
10
1
10 nF
10 0
10 -1
10 1
10 2
10 3
10 4
Fig.12 AC current (RMS value) as a function of frequency at Tamb ≤ 105 °C.
2001 Jun 22
12
f (Hz)
10 5
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
Insulation resistance
CBA204
296x12(full_width)
10 6
RC
(s)
10 5
10 4
0
20
40
60
80
Tamb(°C)
100
Fig.13 RC product as a function of ambient free air temperature: typical curve.
APPLICATION NOTES
• For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage
of 300 V (AC) ±10% instability.
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 .....
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
– If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V
(DC) and divided by the applied voltage.
2001 Jun 22
13
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
MARKING
Product marking
HEAD FACE
144x12(halfpage)
The capacitors are marked (see Figs 14 to 15) with the
following information:
1. Rated capacitance code in accordance with
“IEC 60062”
100n M
338 4
FRONT FACE
BC 0133
MKP
300V~
2. Tolerance on rated capacitance; M = ±20%; K = ±10%
X2
R
3. Rated (AC) voltage (e.g. 300 V)
02
4. Sub-class (e.g. X2)
CBB292
5. Manufacturer’s type designation (e.g. 338 4)
6. Code for dielectric material (MKP)
Fig.14 Example of marking for a capacitor with
original pitch = 15 mm.
7. Manufacturer and origin (“ “ Belgium; “PL” Poland)
8. Year and week of manufacture (e.g. 0133).
HEAD FACE
144x12(halfpage)
1µ0 M
300V~
338 4 MKP
02
BC 0133 X2
R
CBB293
Fig.15 Example of marking for a capacitor with
original pitch ≥ 22.5 mm.
2001 Jun 22
14
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
Package marking
The package containing the capacitors is marked as shown Fig.16.
Barcode label marking
LINE
MARKING EXPLANATION
1
Manufacturer’s name
2
Country of origin
3
Sub-family
4
Type description and sub class
5
Capacitance value, tolerance, voltage and
climatic category (“IEC 60068-1”)
6
Safety approvals
7
Preference origin code: B
Country of origin in code: 780 (Poland)
Responsible production centre: PL
Work order: WO
8
Product type description
9
Quantity and production period, year and week
code
10
Product code (12NC)
Fig.16 Barcode label.
2001 Jun 22
15
BCcomponents
Product Specification
Interference suppression film capacitors
MKP 338 4 X2
QUICK REFERENCE TEST REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”
load 10 N; 10 s
Bending:
“IEC 60068-2-21”
load 5 N; 4 × 90 °
Resistance to
soldering heat:
“IEC 60068-2-20”
solder bath: 260 °C; 10 s
no visible damage
legible marking
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component (fixed leads only)
Rapid change of temperature: 5 cycles
“IEC 60068-2-14”
1 cycle = 30 minutes at −55 °C and
30 minutes at 105 °C
|∆C/C| ≤ 5%
Vibration:
“IEC 60068-2-6”
10 to 55 Hz;
amplitude 0.75 mm; 6 hours
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Shock:
“IEC 60068-2-27”
half sinewave; 490 m/s2; 11 ms
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 105 °C
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
2 hours; −55 °C
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Voltage proof:
“IEC 60384-14”
Rins ≥ 50% of specified value
Vp = 1290 V (DC); 1 minute
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
56 days; 40 °C;
90 to 95% RH no load
Vp = 1290 V (DC); 1 minute
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
Endurance (AC):
“IEC 60384-14”
2001 Jun 22
3 × 2.5 kV pulse voltage for X2;
1000 hours; 1.25 × URac at 105 °C;
once per hour; 0.1 s; 1000 V (RMS) via
resistor of 47 Ω;
Vp = 1290 V (DC); 1 minute
16
|∆C/C| ≤10%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
BCcomponents
Product Specification
Interference suppression film capacitors
PROCEDURE
(quick reference)
TEST
MKP 338 4 X2
REQUIREMENTS
|∆C/C| ≤ 10%
Charge and discharge:
“IEC 60384-14”
10000 cycles; 5 ms;
1.5 × dV/dt
Passive flammability:
“IEC 60384-14”
class B
Active flammability:
“IEC 60384-14”
20 × 2.5 kV discharge
Heat storage:
“IEC 60384-14”
1000 hours; 105 °C
Resistance to soldering heat
with preheating:
“IEC 60384-14”
preheating: 105 °C;
solder bath: 260 °C; 10 s
Active flammability test
voltage proof up to 2 × peak impulse
voltage of 4.13 or until breakdown
(100 V/sec, current limited 2mA)
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
Rins ≥ 50% of specified value
no burning
no burning
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
|∆C/C| ≤ 5%
∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 1
∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 1
failed capacitors connected to a
300 V (AC) power supply during
5 minutes.
Note
1. Measuring frequency 10 kHz for C ≤ 1 µF and 1 kHz for C > 1 µF.
2001 Jun 22
17
no burning