FPGA CONFIGURATORS AT18F Series FPGA Configuration Flash Memory The AT18F Series of JTAG In-System Programmable Configuration PROMs (configurators) provide an easy-to-use, cost-effective configuration memory for Field Programmable Gate Arrays (FPGAs). The configurators use a simple serial-access procedure to configure one or more FPGA devices. The configurators can be programmed with an Atmel® programmer or industry-standard, third-party, standalone programmers from manufacturers such as BP, Data I/O, Hi-Lo, etc. Key Features Very Low Cost Configuration Memory Pin-compatible with Xilinx® Platform Flash Memory Programmable 1M, 2M, 4M and 7M Serial Memories for Xilinx, Virtex® and Spartan® Series FPGAs In-System Programmability (ISP) via JTAG Interface (IEEE 1532) 20-lead TSSOP Small Package, Fully Green and RoHS Compliant Cascadable Read-back to Support Additional Configurations or High-density FPGAs Programming Support Using Atmel Programmer and Industry-standard Third-party Programmers 3.3V Devices with 1.8V, 2.5V or 3.3V I/O Configuration Memory Offering AT18F010-30XU AT18F002-30XU AT18F040-30XU AT18F080-30XU 1-Mbit 2-Mbit 4-Mbit 7-Mbit JTAG Programming Yes Yes Yes Yes VCC 3.3V 3.3V 3.3V 3.3V VCCO 1.8 - 3.3V 1.8 - 3.3V 1.8 - 3.3V 1.8 - 3.3V VCCJ 1.8 - 3.3V 1.8 - 3.3V 1.8 - 3.3V 1.8 - 3.3V 33 MHz 33 MHz 33 MHz 33 MHz 20-lead TSSOP 20-lead TSSOP 20-lead TSSOP 20-lead TSSOP Yes Yes Yes Yes Density Configuration Clock Packaging Green Package Option Headquarters VCCO VCCO Atmel AT18F010/002/040/080 VCCINT 4.7 kOhm VCCJ VCCO VCCINT 4.7 kOhm JTAG ISP Circuit for the AT18F Series Configurators to Configure Xilinx FPGA VCCO D0 Xilinx FPGA in Master Serial Mode (2) MODE MODEPINS PINS DIN VCCO CLK CCLK VCCJ CE DONE OE/RESET INIT_B JTAG ISP Header(4) VREF TDI TMS TMS International Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road, Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 PROG_B CF TDI TDO TCK TMS TCK TDO TCK TDI GND GND TDO NC NC Atmel Configuration Memory and Compatible Xilinx FPGAs Atmel Configurator AT18F010-30XU Xilinx FPGA Xilinx FPGA Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 St Quentin-enYvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Virtex-II XC2V40/2V80 Virtex-E XCV50E/V100E Virtex-II XC2V250 Virtex XCV50/V100/V150 Virtex-E XCV200E/V300E Spartan-3A XC3S50A Virtex XCV200/V300 Spartan-3E XC3S100E Spartan-3A XC3S200A/3S400A Spartan-3 XC3S50/3S200 Spartan-3E XC3S250E Spartan-IIE XC2S50E/2S100E Spartan-3 XC3S400 Literature Requests www.atmel.com/literature Spartan-II XC2S15/2S30/2S50/ 2S100/2S150 Spartan-IIE XC2S150E/2S200E/ 2S300E Web Site www.atmel.com Spartan-II XC2S200 Atmel Configurator AT18F040-30XU Atmel Configurator Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: (1) 408 441-0311 Fax: (1) 408 487-2600 AT18F002-30XU Virtex-II Pro XC2VP2 Product Contact Product Line [email protected] Xilinx FPGA Virtex-II Pro XC2VP4 Atmel Configurator Virtex-II XC2V500/2V1000 AT18F080-30XU Xilinx FPGA Virtex-5LX XC5VLX30 XC4VLX15/4VLX25 Virtex-E XCV400E/V405E/V600E Virtex-4 LX Virtex XCV400/V600 Virtex-4 FX XC4VFX12/4VFX20 Spartan-3A XC3S700A Virtex-II Pro X XC2VPX20 Spartan-3E XC3S500E/3S1200E Virtex-II Pro XC2VP7/2VP20 Spartan-3L XC3S1000L Virtex-II XC2V1500/2V2000 Spartan-3 XC3S1000 Virtex-E Spartan-IIE XC2S400E/2S600E XCV812E/V1000E/ V1600E Virtex XCV800/V1000 Spartan-3A XC3S1400A Spartan-3E XC3S1600E Spartan-3L XC3S1500L Spartan-3 XC3S1500/3S2000 Atmel Programming Tools Software: JCPS – JTAG Version of Configurator Programming System. Hardware: AT18F-DK3 Configurator Programming Kit – It includes the ATF15xx-DK3 Baseboard, the ATF15xxDK3-SAX20 Adapter Module, the ATDH11151VPC Cable and the AT18F Configurator Converter. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY -EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2008 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Windows® and others are registered trademarks or trademarks of Microsoft® Corporation in US and or other countries.Other terms and product names may be trademarks of others. Rev.: 3681A–CNFG–05/08/5M