Introduction to the SMD Product Listing Each Standard Microcircuit Drawing (SMD) part number that Atmel supplies corresponds to an Atmel /883 part number. SMD products are compliant to MILSTD-883, paragraph 1.2.1 and to the requirements of the applicable standard microcircuit drawing. The tables in this section list the currently approved Atmel SMD parts by Atmel part number (Table 1) and by SMD part number (Table 2). They define and cross reference the Atmel /883 part number with the SMD part number for your ordering convenience. Figure 1 (below) shows how an Atmel SMD order number defines a part, compared to the components of the Atmel similar part number. Please note that some SMD part numbers contain the letter “M” between the device type and the case outline designator. The “M” is part of the one part-one number system, set up by DESC. It is a device class designator which indicates the part is an SMD part number as opposed to being a JAN part number. Figure 1. Components of an SMD number (top) compared to the Atmel similar part number (bottom). Standard Microcircuit Drawing (SMD) Number Device SMD Class Device Designator Type (M=SMD part) Case Outline (SMD Code) Lead Finish Temperature Range (M=Military) Military Compliance Designator Standard Microcircuit Drawing Product Offering SMD Products SMD Products 5962-38267 01 M YX Atmel Part Number Speed Case Outline (Atmel Code) AT28C010-25LM/883 Standard Microcircuit Drawing Product Offering Rev. 0553B–06/98 1 How to Use the Atmel Part Type Reference Table The organization of Table 1 enables the purchaser to order a standardized military part by using the Atmel generic part type to locate the correct SMD drawing number. The SMD part number is the order number for SMD devices. The Atmel generic part type, which begins with the prefix “AT,” heads Table 1. There are four sections in this table (see sample table below): SMD Options The first section lists the SMD options available at Atmel. It includes the industry generic part type, the SMD drawing number, and the SMD device type. The SMD case outline options, the lead finish options, the circuit description, and the access time that correspond to that device type are also included. The tables for the EEPROM in this section Note: include the end write indicator in the circuit description column and the write mode for the specific device type. Order Code Cross-Reference The next section of the table cross-references each optionally complete SMD part number (see ➊ below) with the Atmel similar /883 part number (see ➋ below). Case Outline Legend The third section gives the SMD case outline options available for the device. Lead Finish Legend The last section lists the SMD lead finish options available for the device. Finish letter “X” shall not be marked on the microcircuit or its packaging. This designation is provided for use in drawings, part lists, purchase orders, or other documentation where lead finishes A, B or C are all considered acceptable and interchangeable without preference. For Government logistic support, the A lead finish will be acquired and supplied to the end user when the X is included in the PIN for lead finish. If the PIN is not available with the A lead finish, the same PIN will be acquired except with the B or C lead finish designator as determined by availability. Type C terminal material is a fired on metallization used with leadless chip carriers. How to Use the Atmel SMD Number Reference Table Table 2 allows quick reference to the Atmel /883 similar part number when the SMD part number is known by the purchaser. The head for Table 2 is the SMD drawing number (see the example table below). The only section in this table is a cross-reference between the optionally complete SMD drawing number (see ➊ below) and the correspond- 2 SMD Products ing Atmel similar /883 part number (see ➋ below). It also includes the circuit description and access time for that part number. The EEPROM tables include the end write indicator (which is in the circuit description column) the write mode, the write speed, and the endurance cycles for the specific part number. SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C64 Generic Number 28C64 Standard Microcircuit Drawing Number Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-87514 13 X, Y, Z X, A 8K x 8 EEPROM Rdy/Busy Byte 350 1 10K 5962-87514 14 X, Y X, A 8K x 8 EEPROM Rdy/Busy Byte 300 1 10K 5962-87514 15 X, Y, Z X, A 8K x 8 EEPROM Rdy/Busy Byte 250 1 10K 5962-87514 16 X, Y X, A 8K x 8 EEPROM Rdy/Busy Byte 200 1 10K 5962-87514 17 X, Y X, A 8K x 8 EEPROM Rdy/Busy Byte 150 1 10K Example:Atmel Order Number Atmel Cage No. 1FN41 Description Atmel Similar Part Number 5962-87514 13 XX AT28C64-35DM/883 5962-87514 13 YX AT28C64-35LM/883 5962-87514 13 ZX AT28C64-35FM/883 5962-87514 14 XX AT28C64-30DM/883 5962-87514 14 YX AT28C64-30LM/883 5962-87514 15 XX AT28C64-25DM/883 5962-87514 15 YX AT28C64-25LM/883 5962-87514 15 ZX AT28C64-25FM/883 5962-87514 16 XX AT28C64-20DM/883 5962-87514 16 YX AT28C64-20LM/883 5962-87514 17 XX AT28C64-15DM/883 5962-87514 17 YX AT28C64-15LM/883 Case Outline X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip New designs to use AT28C256 product SMD 5962-88525. 3 Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C64F Generic Number 28C64F Standard Microcircuit Drawing Number Drawing Number Device Type Case Outline Lead Finish 5962-87514 28 X, Y, Z X, A Example: Atmel Order Number Atmel Cage No. 1FN41 Description Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 8K x 8 EEPROM Rdy/Busy Byte 200 0.2 10K Atmel Similar Part Number 5962-87514 28 XX AT28C64F-20DM/883 5962-87514 28 YX AT28C64F-20LM/883 5962-87514 28 ZX AT28C64F-20FM/883 Case Outline X 28D6 28 Lead 0.600" Wide Non-Windowed Ceramic Dual Inline Package (Cerdip) Y 32L 32 Pad Non-Windowed Ceramic Leadless Chip Carrier (LCC) Z 28F 28 Lead Non-Windowed Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: 4 X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip New designs to use AT28C256 product SMD 5962-88525. SMD Products SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C64X Generic Number 28C64X Standard Microcircuit Drawing Number Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-87514 18 X, Y X, A 8K x 8 EEPROM Data Polling Byte 350 1 10K 5962-87514 19 X, Y X, A 8K x 8 EEPROM Data Polling Byte 300 1 10K 5962-87514 20 X, Y, Z X, A 8K x 8 EEPROM Data Polling Byte 250 1 10K 5962-87514 21 X, Y X, A 8K x 8 EEPROM Data Polling Byte 200 1 10K 5962-87514 22 X, Y X, A 8K x 8 EEPROM Data Polling Byte 150 1 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Description Atmel Similar Part Number 5962-87514 18 XX AT28C64X-35DM/883 5962-87514 18 YX AT28C64X-35LM/883 5962-87514 19 XX AT28C64X-30DM/883 5962-87514 19 YX AT28C64X-30LM/883 5962-87514 20 XX AT28C64X-25DM/883 5962-87514 20 YX AT28C64X-25LM/883 5962-87514 20 ZX AT28C64X-25FM/883 5962-87514 21 XX AT28C64X-20DM/883 5962-87514 21 YX AT28C64X-20LM/883 5962-87514 22 XX AT28C64X-15DM/883 5962-87514 22 YX AT28C64X-15LM/883 Case Outline X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip New designs to use AT28C256 product SMD 5962-88525. 5 Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C64B Generic Number 28C64B Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-87514 08 X X, A 8K x 8 EEPROM Data Polling Byte/ Page 250 2 10K 5962-87514 09 X X, A 8K x 8 EEPROM Data Polling Byte/ Page 200 2 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Atmel Similar Part Number 5962-87514 08 XX AT28C64B-25DM/883 5962-87514 09 XX AT28C64B-20DM/883 Case Outline X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Lead Finish Note: X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip New designs to use AT28C256 product SMD 5962-88525. AT28HC64B Generic Number 28HC64B Standard Microcircuit Drawing Number Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-87514 10 X X, A 8K x 8 EEPROM Data Polling Byte/ Page 120 2 10K 5962-87514 11 X X, A 8K x 8 EEPROM Data Polling Byte/ Page 90 2 10K 5962-87514 12 X X, A 8K x 8 EEPROM Data Polling Byte/ Page 70 2 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Description Atmel Similar Part Number 5962-87514 10 XX AT28HC64B-12DM/883 5962-87514 11 XX AT28HC64B-90DM/883 5962-87514 12 XX AT28HC64B-70DM/883 Case Outline X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Lead Finish Note: 6 X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip New designs to use AT28C256 product SMD 5962-88634. SMD Products SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C256 Generic Number 28C256 Standard Microcircuit Drawing Number Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-88525 01 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 02 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 03 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 04 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 06 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 09(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 10(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 11(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 12(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 14(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Description Atmel Similar Part Number 5962-88525 01 UX AT28C256-35UM/883 5962-88525 01 XX AT28C256-35DM/883 5962-88525 01 YX AT28C256-35LM/883 5962-88525 01 ZX AT28C256-35FM/883 5962-88525 02 UX AT28C256-30UM/883 5962-88525 02 XX AT28C256-30DM/883 5962-88525 02 YX AT28C256-30LM/883 5962-88525 02 ZX AT28C256-30FM/883 5962-88525 03 UX AT28C256-25UM/883 5962-88525 03 XX AT28C256-25DM/883 5962-88525 03 YX AT28C256-25LM/883 5962-88525 03 ZX AT28C256-25FM/883 5962-88525 04 UX AT28C256-20UM/883 5962-88525 04 XX AT28C256-20DM/883 5962-88525 04 YX AT28C256-20LM/883 5962-88525 04 ZX AT28C256-20FM/883 7 Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C256 (Continued) Example: Atmel Order Number Atmel Cage No. 1FN41 Atmel Similar Part Number 5962-88525 06 UX AT28C256-15UM/883 5962-88525 06 XX AT28C256-15DM/883 5962-88525 06 YX AT28C256-15LM/883 5962-88525 06 ZX AT28C256-15FM/883 5962-88525 09 UX AT28C256-35UM/883 5962-88525 09 XX AT28C256-35DM/883 5962-88525 09 YX AT28C256-35LM/883 5962-88525 09 ZX AT28C256-35FM/883 5962-88525 10 UX AT28C256-30UM/883 5962-88525 10 XX AT28C256-30DM/883 5962-88525 10 YX AT28C256-30LM/883 5962-88525 10 ZX AT28C256-30FM/883 5962-88525 11 UX AT28C256-25UM/883 5962-88525 11 XX AT28C256-25DM/883 5962-88525 11 YX AT28C256-25LM/883 5962-88525 11 ZX AT28C256-25FM/883 5962-88525 12 UX AT28C256-20UM/883 5962-88525 12 XX AT28C256-20DM/883 5962-88525 12 YX AT28C256-20LM/883 5962-88525 12 ZX AT28C256-20FM/883 5962-88525 14 UX AT28C256-15UM/883 5962-88525 14 XX AT28C256-15DM/883 5962-88525 14 YX AT28C256-15LM/883 5962-88525 14 ZX AT28C256-15FM/883 Case Outline U 28U, 28 Pin, Ceramic Pin Grid Array (PGA) X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: 8 X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip 1. SMD specifies Software Data Protection feature for device type, although Atmel product supplied to every device type on the SMD is 100% tested for this feature. SMD Products SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C256E Generic Number 28C256E Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-88525 05 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte Page 250 10 100K 5962-88525 08 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 13(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 16(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K Example: Atmel Order Number Atmel Cage No. 1FN41 Similar Part Number 5962-88525 05 UX AT28C256E-25UM/883 5962-88525 05 XX AT28C256E-25DM/883 5962-88525 05 YX AT28C256E-25LM/883 5962-88525 05 ZX AT28C256E-25FM/883 5962-88525 08 UX AT28C256E-15UM/883 5962-88525 08 XX AT28C256E-15DM/883 5962-88525 08 YX AT28C256E-15LM/883 5962-88525 08 ZX AT28C256E-15FM/883 5962-88525 13 UX AT28C256E-25UM/883 5962-88525 13 XX AT28C256E-25DM/883 5962-88525 13 YX AT28C256E-25LM/883 5962-88525 13 ZX AT28C256E-25FM/883 5962-88525 16 UX AT28C256E-15UM/883 5962-88525 16 XX AT28C256E-15DM/883 5962-88525 16 YX AT28C256E-15LM/883 5962-88525 16 ZX AT28C256E-15FM/883 Case Outline U 28U, 28 Pin, Ceramic Pin Grid Array (PGA) X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip 1. SMD specifies Software Data Protection feature for device type, although Atmel product supplied to every device type on the SMD is 100% tested for this feature. 9 Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C256F Generic Number 28C256F Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-88525 07 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 15(1) U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Atmel Similar Part Number 5962-88525 07 UX AT28C256F-15UM/883 5962-88525 07 XX AT28C256F-15DM/883 5962-88525 07 YX AT28C256F-15LM/883 5962-88525 07 ZX AT28C256F-15FM/883 5962-88525 15 UX AT28C256F-15UM/883 5962-88525 15 XX AT28C256F-15DM/883 5962-88525 15 YX AT28C256F-15LM/883 5962-88525 15 ZX AT28C256F-15FM/883 Case Outline U 28U, 28 Pin, Ceramic Pin Grid Array (PGA) X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish Note: 10 X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip 1. SMD specifies Software Data Protection feature for device type, although Atmel product supplied to every device type on the SMD is 100% tested for this feature. SMD Products SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28HC256 Generic Number 28HC256 Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-88634 01 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 120 10 10K 5962-88634 03 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 90 10 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Similar Part Number 5962-88634 01 UX AT28HC256-12UM/883 5962-88634 01 XX AT28HC256-12DM/883 5962-88634 01 YX AT28HC256-12LM/883 5962-88634 01 ZX AT28HC256-12FM/883 5962-88634 03 UX AT28HC256-90UM/883 5962-88634 03 XX AT28HC256-90DM/883 5962-88634 03 YX AT28HC256-90LM/883 5962-88634 03 ZX AT28HC256-90FM/883 Case Outline U 28U, 28 Pin, Ceramic Pin Grid Array (PGA) X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip 11 Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28HC256F Generic Number 28HC256F Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Speed (ms) Endurance (Cycles) 5962-88634 02 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 120 3 10K 5962-88634 04 U, X, Y, Z X, A 32K x 8 EEPROM Data Polling Byte/ Page 90 3 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Atmel Similar Part Number 5962-88634 02 UX AT28HC256F-12UM/883 5962-88634 02 XX AT28HC256F-12DM/883 5962-88634 02 YX AT28HC256F-12LM/883 5962-88634 02 ZX AT28HC256F-12FM/883 5962-88634 04 UX AT28HC256F-90UM/883 5962-88634 04 XX AT28HC256F-90DM/883 5962-88634 04 YX AT28HC256F-90LM/883 5962-88634 04 ZX AT28HC256F-90FM/883 Case Outline U 28U, 28 Pin, Ceramic Pin Grid Array (PGA) X 28D6, 28 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 28F, 28 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish 12 X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip SMD Products SMD Products Table 1. Atmel SMD Part Types, Listed by Atmel Part Number AT28C010 Generic Number 28C010 Standard Microcircuit Drawing Number Description Drawing Number Device Type Case Outline Lead Finish Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd (ms) Endurance (Cycles) 5962-38267 01 T, U, X, Y, Z X, A 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 250 10 10K 5962-38267 03 T, U, X, Y, Z X, A 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 200 10 10K 5962-38267 05 T, U, X, Y, Z X, A 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 150 10 10K 5962-38267 07 U, X, Y, Z X, A 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 120 10 10K Example: Atmel Order Number Atmel Cage No. 1FN41 Atmel Similar Part Number 5962-38267 01M TX AT28C010-25UM/883 5962-38267 01M UX AT28C010-25EM/883 5962-38267 01M XX AT28C010-25DM/883 5962-38267 01M YX AT28C010-25LM/883 5962-38267 01M ZX AT28C010-25FM/883 5962-38267 03M TX AT28C010-20UM/883 5962-38267 03M UX AT28C010-20EM/883 5962-38267 03M XX AT28C010-20DM/883 5962-38267 03M YX AT28C010-20LM/883 5962-38267 03M ZX AT28C010-20FM/883 5962-38267 05M TX AT28C010-15UM/883 5962-38267 05M UX AT28C010-15EM/883 5962-38267 05M XX AT28C010-15DM/883 5962-38267 05M YX AT28C010-15LM/883 5962-38267 05M ZX AT28C010-15FM/883 5962-38267 07M UX AT28C010-12EM/883 5962-38267 07M XX AT28C010-12DM/883 5962-38267 07M YX AT28C010-12LM/883 5962-38267 07M ZX AT28C010-12FM/883 Case Outline T 30U, 30 Pin, Ceramic Pin Grid Array (PGA) U 32L, 32 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) X 32D6, 32 Lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) Y 44L, 44 Pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) Z 32F, 32 Lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) Lead Finish X Denotes no preference in lead finish; Finish A will be supplied (per paragraph 30.6.2.7 of MIL-I-38535B Appendix A) A Hot Solder Dip 13 Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-38267 Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-38267 01M XX AT28C010-25DM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 250 10 10K 5962-38267 01M YX AT28C010-25LM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 250 10 10K 5962-38267 01M ZX AT28C010-25FM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 250 10 10K 5962-38267 03M XX AT28C010-20DM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 200 10 10K 5962-38267 03M YX AT28C010-20LM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 200 10 10K 5962-38267 03M ZX AT28C010-20FM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 200 10 10K 5962-38267 05M XX AT28C010-15DM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 150 10 10K 5962-38267 05M YX AT28C010-15LM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 150 10 10K 5962-38267 05M ZX AT28C010-15FM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 150 10 10K 5962-38267 07M XX AT28C010-12DM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 120 10 10K 5962-38267 07M YX AT28C010-12LM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 120 10 10K 5962-38267 07M ZX AT28C010-12FM/883 128K x 8, 1M bit EEPROM Data Polling Byte/ Page 120 10 10K 14 SMD Products SMD Products Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-87514 Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-87514 08 XX AT28C64B-25DM/883 8K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-87514 09 XX AT28C64B-20DM/883 8K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-87514 10 XX AT28HC64B-12DM/883 8K x 8 EEPROM Data Polling Byte/ Page 120 2 10K 5962-87514 11 XX AT28HC64B-90DM/883 8K x 8 EEPROM Data Polling Byte/ Page 90 2 10K 5962-87514 12 XX AT28HC64B-70DM/883 8K x 8 EEPROM Data Polling Byte/ Page 70 2 10K 5962-87514 13 XX AT28C64-35DM/883 8K x 8 EEPROM Rdy/Busy Byte 350 1 10K 5962-87514 13 YX AT28C64-35LM/883 8K x 8 EEPROM Rdy/Busy Byte 350 1 10K 5962-87514 13 ZX AT28C64-35FM/883 8K x 8 EEPROM Rdy/Busy Byte 350 1 10K 5962-87514 14 XX AT28C64-30DM/883 8K x 8 EEPROM Rdy/Busy Byte 300 1 10K 5962-87514 14 YX AT28C64-30LM/883 8K x 8 EEPROM Rdy/Busy Byte 300 1 10K 5962-87514 15 XX AT28C64-25DM/883 8K x 8 EEPROM Rdy/Busy Byte 250 1 10K 5962-87514 15 YX AT28C64-25LM/883 8K x 8 EEPROM Rdy/Busy Byte 250 1 10K 5962-87514 15 ZX AT28C64-25FM/883 8K x 8 EEPROM Rdy/Busy Byte 250 1 10K 5962-87514 16 XX AT28C64-20DM/883 8K x 8 EEPROM Rdy/Busy Byte 200 1 10K 5962-87514 16 YX AT28C64-20LM/883 8K x 8 EEPROM Rdy/Busy Byte 200 1 10K 5962-87514 17 XX AT28C64-15DM/883 8K x 8 EEPROM Rdy/Busy Byte 150 1 10K 5962-87514 17 YX AT28C64-15LM/883 8K x 8 EEPROM Rdy/Busy Byte 150 1 10K 5962-87514 18 XX AT28C64X-35DM/883 8K x 8 EEPROM Data Polling Byte 350 1 10K 5962-87514 18 YX AT28C64X-35LM/883 8K x 8 EEPROM Data Polling Byte 350 1 10K 5962-87514 19 XX AT28C64X-30DM/883 8K x 8 EEPROM Data Polling Byte 300 1 10K 15 Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-87514 (Continued) Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-87514 19 YX AT28C64X-30LM/883 8K x 8 EEPROM Data Polling Byte 300 1 10K 5962-87514 20 XX AT28C64X-25DM/883 8K x 8 EEPROM Data Polling Byte 250 1 10K 5962-87514 20 YX AT28C64X-25LM/883 8K x 8 EEPROM Data Polling Byte 250 1 10K 5962-87514 20 ZX AT28C64X-25FM/883 8K x 8 EEPROM Data Polling Byte 250 1 10K 5962-87514 21 XX AT28C64X-20DM/883 8K x 8 EEPROM Data Polling Byte 200 1 10K 5962-87514 21 YX AT28C64X-20LM/883 8K x 8 EEPROM Data Polling Byte 200 1 10K 5962-87514 22 XX AT28C64X-15DM/883 8K x 8 EEPROM Data Polling Byte 150 1 10K 5962-87514 22 YX AT28C64X-15LM/883 8K x 8 EEPROM Data Polling Byte 150 1 10K 5962-87514 28 XX AT28C64F-20DM/883 8K x 8 EEPROM Data Polling Byte 200 0.2 10K 5962-87514 28 YX AT28C64X-20LM/883 8K x 8 EEPROM Data Polling Byte 200 0.2 10K 5962-87514 28 ZX AT28C64X-20FM/883 8K x 8 EEPROM Data Polling Byte 200 0.2 10K 16 SMD Products SMD Products Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-88525 Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-88525 01 UX AT28C256-35UM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 01 XX AT28C256-35DM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 01 YX AT28C256-35LM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 01 ZX AT28C256-35FM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 02 UX AT28C256-30UM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 02 XX AT28C256-30DM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 02 YX AT28C256-30LM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 02 ZX AT28C256-30FM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 03 UX AT28C256-25UM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 03 XX AT28C256-25DM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 03 YX AT28C256-25LM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 03 ZX AT28C256-25FM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 04 UX AT28C256-20UM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 04 XX AT28C256-20DM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 04 YX AT28C256-20LM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 04 ZX AT28C256-20FM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 05 UX AT28C256E-25UM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 05 XX AT28C256E-25DM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 05 YX AT28C256E-25LM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 05 ZX AT28C256E-25FM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 17 Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-88525 (Continued) Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-88525 06 UX AT28C256-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 06 XX AT28C256-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 06 YX AT28C256-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 06 ZX AT28C256-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 07 UX AT28C256F-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 07 XX AT28C256F-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 07 YX AT28C256F-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 07 ZX AT28C256F-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 08 UX AT28C256E-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 08 XX AT28C256E-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 08 YX AT28C256E-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 08 ZX AT28C256E-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 09 UX(1) AT28C256-35UM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 09 XX(1) AT28C256-35DM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 09 YX(1) AT28C256-35LM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 09 ZX(1) AT28C256-35FM/883 32K x 8 EEPROM Data Polling Byte/ Page 350 10 10K 5962-88525 10 UX(1) AT28C256-30UM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 10 XX(1) AT28C256-30DM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 10 Y 1) AT28C256-30LM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 10 ZX(1) AT28C256-30FM/883 32K x 8 EEPROM Data Polling Byte/ Page 300 10 10K 5962-88525 11 UX(1) AT28C256-25UM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 18 SMD Products SMD Products Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-88525 (Continued) Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-88525 11 X(1) AT28C256-25DM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 11 YX(1) AT28C256-25LM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 11 ZX(1) AT28C256-25FM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 10K 5962-88525 12 UX(1) AT28C256-20UM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 12 XX(1) AT28C256-20DM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 12 YX(1) AT28C256-20LM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 12 ZX(1) AT28C256-20FM/883 32K x 8 EEPROM Data Polling Byte/ Page 200 10 10K 5962-88525 13 UX 1) AT28C256E-25UM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 13 XX(1) AT28C256E-25DM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 13 YX(1) AT28C256E-25LM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 13 ZX(1) AT28C256E-25FM/883 32K x 8 EEPROM Data Polling Byte/ Page 250 10 100K 5962-88525 14 UX(1) AT28C256-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 14 XX(1) AT28C256-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 14 YX(1) AT28C256-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 14 ZX(1) AT28C256-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 10K 5962-88525 15 UX(1) AT28C256F-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 15 XX(1) AT28C256F-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 15 YX(1) AT28C256F-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 15 ZX(1) AT28C256F-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 3 10K 5962-88525 16 UX(1) AT28C256E-15UM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 19 Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-88525 (Continued) Atmel Order Number Atmel Similar Part Number Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) 5962-88525 16 XX(1) AT28C256E-15DM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 16 YX(1) AT28C256E-15LM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 5962-88525 16 ZX(1) AT28C256E-15FM/883 32K x 8 EEPROM Data Polling Byte/ Page 150 10 100K 20 SMD Products SMD Products Table 2. Atmel SMD Part Types, Listed by SMD Number 5962-88634 Circuit Description End Write Indicator Write Mode Access Time (ns) Write Spd. (ms) Endur. (Cycles) AT28HC256-12UM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 10 10K 5962-88634 01 XX AT28HC256-12DM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 10 10K 5962-88634 01 YX AT28HC256-12LM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 10 10K 5962-88634 01 ZX AT28HC256-12FM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 10 10K 5962-88634 02 UX AT28HC256F-12UM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 3 10K 5962-88634 02 XX AT28HC256F-12DM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 3 10K 5962-88634 02 YX AT28HC256F-12LM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 3 10K 5962-88634 02 ZX AT28HC256F-12FM/883 32K x 8 EEPROM Data Polling Byte/ Page 120 3 10K 5962-88634 03 UX AT28HC256-90UM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 10 10K 5962-88634 03 XX AT28HC256-90DM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 10 10K 5962-88634 03 YX AT28HC256-90LM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 10 10K 5962-88634 03 ZX AT28HC256-90FM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 10 10K 5962-88634 04 UX AT28HC256F-90UM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 3 10K 5962-88634 04 XX AT28HC256F-90DM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 3 10K 5962-88634 04 YX AT28HC256F-90LM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 3 10K 5962-88634 04 ZX AT28HC256F-90FM/883 32K x 8 EEPROM Data Polling Byte/ Page 90 3 10K Atmel Order Number Atmel Similar Part Number 5962-88634 01 UX 21 22 SMD Products SMD Products 23 Atmel Headquarters Atmel Operations Corporate Headquarters Atmel Colorado Springs 2325 Orchard Parkway San Jose, CA 95131 TEL (408) 441-0311 FAX (408) 487-2600 Europe 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL (719) 576-3300 FAX (719) 540-1759 Atmel Rousset Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL (44) 1276-686677 FAX (44) 1276-686697 Zone Industrielle 13106 Rousset Cedex, France TEL (33) 4 42 53 60 00 FAX (33) 4 42 53 60 01 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon, Hong Kong TEL (852) 27219778 FAX (852) 27221369 Japan Atmel Japan K.K. Tonetsu Shinkawa Bldg., 9F 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 Fax-on-Demand North America: 1-(800) 292-8635 International: 1-(408) 441-0732 e-mail [email protected] Web Site http://www.atmel.com BBS 1-(408) 436-4309 © Atmel Corporation 1998. Atmel Cor poration makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s website. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual proper ty of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life suppor t devices or systems. Marks bearing ® and/or ™ are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others. Printed on recycled paper. 0553B–06/98/xM